void SimulatorFullyImplicitBlackoilPolymer<GridT>::
handleAdditionalWellInflow(SimulatorTimer& timer,
WellsManager& wells_manager,
typename BaseType::WellState& well_state,
const Wells* wells)
{
// compute polymer inflow
std::unique_ptr<PolymerInflowInterface> polymer_inflow_ptr;
if (deck_->hasKeyword("WPOLYMER")) {
if (wells_manager.c_wells() == 0) {
OPM_THROW(std::runtime_error, "Cannot control polymer injection via WPOLYMER without wells.");
}
polymer_inflow_ptr.reset(new PolymerInflowFromDeck(*BaseType::eclipse_state_, *wells, Opm::UgGridHelpers::numCells(BaseType::grid_), timer.currentStepNum()));
} else {
OPM_MESSAGE("Warning: simulating with no WPOLYMER in deck (no polymer will be injected).");
polymer_inflow_ptr.reset(new PolymerInflowBasic(0.0*Opm::unit::day,
1.0*Opm::unit::day,
0.0));
}
std::vector<double> polymer_inflow_c(Opm::UgGridHelpers::numCells(BaseType::grid_));
polymer_inflow_ptr->getInflowValues(timer.simulationTimeElapsed(),
timer.simulationTimeElapsed() + timer.currentStepLength(),
polymer_inflow_c);
well_state.polymerInflow() = polymer_inflow_c;
if (has_plyshlog_) {
computeRepRadiusPerfLength(*BaseType::eclipse_state_, timer.currentStepNum(), BaseType::grid_, wells_rep_radius_, wells_perf_length_, wells_bore_diameter_);
}
}
SimulatorReport SimulatorCompressiblePolymer::Impl::run(SimulatorTimer& timer,
PolymerBlackoilState& state,
WellState& well_state)
{
std::vector<double> transport_src(grid_.number_of_cells);
std::vector<double> polymer_inflow_c(grid_.number_of_cells);
// Initialisation.
std::vector<double> initial_pressure;
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
std::vector<double> initial_porevol = porevol;
// Main simulation loop.
Opm::time::StopWatch pressure_timer;
double ptime = 0.0;
Opm::time::StopWatch transport_timer;
double ttime = 0.0;
Opm::time::StopWatch total_timer;
total_timer.start();
double init_surfvol[2] = { 0.0 };
double inplace_surfvol[2] = { 0.0 };
double polymass = computePolymerMass(porevol, state.saturation(), state.getCellData( state.CONCENTRATION ), poly_props_.deadPoreVol());
double polymass_adsorbed = computePolymerAdsorbed(grid_, props_, poly_props_, state, rock_comp_props_);
double init_polymass = polymass + polymass_adsorbed;
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
double tot_polyinj = 0.0;
double tot_polyprod = 0.0;
Opm::computeSaturatedVol(porevol, state.surfacevol(), init_surfvol);
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
Opm::WellReport wellreport;
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
wellreport.push(props_, *wells_, state.pressure(), state.surfacevol(),
state.saturation(), 0.0, well_state.bhp(), well_state.perfRates());
}
// Report timestep and (optionally) write state to disk.
timer.report(std::cout);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
}
initial_pressure = state.pressure();
// Solve pressure equation.
if (check_well_controls_) {
computeFractionalFlow(props_, poly_props_, allcells_,
state.pressure(), state.temperature(), state.surfacevol(), state.saturation(),
state.getCellData( state.CONCENTRATION ), state.getCellData( state.CMAX ) ,
fractional_flows);
wells_manager_.applyExplicitReinjectionControls(well_resflows_phase, well_resflows_phase);
}
bool well_control_passed = !check_well_controls_;
int well_control_iteration = 0;
do {
// Run solver
pressure_timer.start();
psolver_.solve(timer.currentStepLength(), state, well_state);
// Renormalize pressure if both fluids and rock are
// incompressible, and there are no pressure
// conditions (bcs or wells). It is deemed sufficient
// for now to renormalize using geometric volume
// instead of pore volume.
if (psolver_.singularPressure()) {
// Compute average pressures of previous and last
// step, and total volume.
double av_prev_press = 0.0;
double av_press = 0.0;
double tot_vol = 0.0;
const int num_cells = grid_.number_of_cells;
for (int cell = 0; cell < num_cells; ++cell) {
av_prev_press += initial_pressure[cell]*grid_.cell_volumes[cell];
av_press += state.pressure()[cell]*grid_.cell_volumes[cell];
tot_vol += grid_.cell_volumes[cell];
}
// Renormalization constant
const double ren_const = (av_prev_press - av_press)/tot_vol;
for (int cell = 0; cell < num_cells; ++cell) {
state.pressure()[cell] += ren_const;
}
const int num_wells = (wells_ == NULL) ? 0 : wells_->number_of_wells;
for (int well = 0; well < num_wells; ++well) {
well_state.bhp()[well] += ren_const;
}
}
// Stop timer and report
pressure_timer.stop();
double pt = pressure_timer.secsSinceStart();
std::cout << "Pressure solver took: " << pt << " seconds." << std::endl;
ptime += pt;
// Optionally, check if well controls are satisfied.
if (check_well_controls_) {
Opm::computePhaseFlowRatesPerWell(*wells_,
well_state.perfRates(),
fractional_flows,
well_resflows_phase);
std::cout << "Checking well conditions." << std::endl;
// For testing we set surface := reservoir
well_control_passed = wells_manager_.conditionsMet(well_state.bhp(), well_resflows_phase, well_resflows_phase);
++well_control_iteration;
if (!well_control_passed && well_control_iteration > max_well_control_iterations_) {
OPM_THROW(std::runtime_error, "Could not satisfy well conditions in " << max_well_control_iterations_ << " tries.");
}
if (!well_control_passed) {
std::cout << "Well controls not passed, solving again." << std::endl;
} else {
std::cout << "Well conditions met." << std::endl;
}
}
} while (!well_control_passed);
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
initial_porevol = porevol;
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
// Process transport sources (to include bdy terms and well flows).
Opm::computeTransportSource(props_, wells_, well_state, transport_src);
// Find inflow rate.
const double current_time = timer.simulationTimeElapsed();
double stepsize = timer.currentStepLength();
polymer_inflow_.getInflowValues(current_time, current_time + stepsize, polymer_inflow_c);
// Solve transport.
transport_timer.start();
if (num_transport_substeps_ != 1) {
stepsize /= double(num_transport_substeps_);
std::cout << "Making " << num_transport_substeps_ << " transport substeps." << std::endl;
}
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
double polyinj = 0.0;
double polyprod = 0.0;
for (int tr_substep = 0; tr_substep < num_transport_substeps_; ++tr_substep) {
tsolver_.solve(&state.faceflux()[0], initial_pressure,
state.pressure(), state.temperature(), &initial_porevol[0], &porevol[0],
&transport_src[0], &polymer_inflow_c[0], stepsize,
state.saturation(), state.surfacevol(),
state.getCellData( state.CONCENTRATION ), state.getCellData( state.CMAX ));
double substep_injected[2] = { 0.0 };
double substep_produced[2] = { 0.0 };
double substep_polyinj = 0.0;
double substep_polyprod = 0.0;
Opm::computeInjectedProduced(props_, poly_props_,
state,
transport_src, polymer_inflow_c, stepsize,
substep_injected, substep_produced,
substep_polyinj, substep_polyprod);
injected[0] += substep_injected[0];
injected[1] += substep_injected[1];
produced[0] += substep_produced[0];
produced[1] += substep_produced[1];
polyinj += substep_polyinj;
polyprod += substep_polyprod;
if (gravity_ != 0 && use_segregation_split_) {
tsolver_.solveGravity(columns_, stepsize,
state.saturation(), state.surfacevol(),
state.getCellData( state.CONCENTRATION ), state.getCellData( state.CMAX ));
}
}
transport_timer.stop();
double tt = transport_timer.secsSinceStart();
std::cout << "Transport solver took: " << tt << " seconds." << std::endl;
ttime += tt;
// Report volume balances.
Opm::computeSaturatedVol(porevol, state.surfacevol(), inplace_surfvol);
polymass = Opm::computePolymerMass(porevol, state.saturation(), state.getCellData( state.CONCENTRATION ), poly_props_.deadPoreVol());
polymass_adsorbed = Opm::computePolymerAdsorbed(grid_, props_, poly_props_,
state, rock_comp_props_);
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
tot_polyinj += polyinj;
tot_polyprod += polyprod;
std::cout.precision(5);
const int width = 18;
std::cout << "\nMass balance: "
" water(surfvol) oil(surfvol) polymer(kg)\n";
std::cout << " In-place: "
<< std::setw(width) << inplace_surfvol[0]
<< std::setw(width) << inplace_surfvol[1]
<< std::setw(width) << polymass << std::endl;
std::cout << " Adsorbed: "
<< std::setw(width) << 0.0
<< std::setw(width) << 0.0
<< std::setw(width) << polymass_adsorbed << std::endl;
std::cout << " Injected: "
<< std::setw(width) << injected[0]
<< std::setw(width) << injected[1]
<< std::setw(width) << polyinj << std::endl;
std::cout << " Produced: "
<< std::setw(width) << produced[0]
<< std::setw(width) << produced[1]
<< std::setw(width) << polyprod << std::endl;
std::cout << " Total inj: "
<< std::setw(width) << tot_injected[0]
<< std::setw(width) << tot_injected[1]
<< std::setw(width) << tot_polyinj << std::endl;
std::cout << " Total prod: "
<< std::setw(width) << tot_produced[0]
<< std::setw(width) << tot_produced[1]
<< std::setw(width) << tot_polyprod << std::endl;
const double balance[3] = { init_surfvol[0] - inplace_surfvol[0] - tot_produced[0] + tot_injected[0],
init_surfvol[1] - inplace_surfvol[1] - tot_produced[1] + tot_injected[1],
init_polymass - polymass - tot_polyprod + tot_polyinj - polymass_adsorbed };
std::cout << " Initial - inplace + inj - prod: "
<< std::setw(width) << balance[0]
<< std::setw(width) << balance[1]
<< std::setw(width) << balance[2]
<< std::endl;
std::cout << " Relative mass error: "
<< std::setw(width) << balance[0]/(init_surfvol[0] + tot_injected[0])
<< std::setw(width) << balance[1]/(init_surfvol[1] + tot_injected[1])
<< std::setw(width) << balance[2]/(init_polymass + tot_polyinj)
<< std::endl;
std::cout.precision(8);
watercut.push(timer.simulationTimeElapsed() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
if (wells_) {
wellreport.push(props_, *wells_, state.pressure(), state.surfacevol(),
state.saturation(), timer.simulationTimeElapsed() + timer.currentStepLength(),
well_state.bhp(), well_state.perfRates());
}
if (output_) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
outputWaterCut(watercut, output_dir_);
if (wells_) {
outputWellReport(wellreport, output_dir_);
}
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = ptime;
report.transport_time = ttime;
report.total_time = total_timer.secsSinceStart();
return report;
}
// ----------------- Main program -----------------
int
main(int argc, char** argv)
try
{
using namespace Opm;
std::cout << "\n================ Test program for weakly compressible two-phase flow with polymer ===============\n\n";
parameter::ParameterGroup param(argc, argv, false);
std::cout << "--------------- Reading parameters ---------------" << std::endl;
// If we have a "deck_filename", grid and props will be read from that.
bool use_deck = param.has("deck_filename");
boost::scoped_ptr<GridManager> grid;
boost::scoped_ptr<BlackoilPropertiesInterface> props;
boost::scoped_ptr<RockCompressibility> rock_comp;
Opm::DeckConstPtr deck;
EclipseStateConstPtr eclipseState;
std::unique_ptr<PolymerBlackoilState> state;
Opm::PolymerProperties poly_props;
// bool check_well_controls = false;
// int max_well_control_iterations = 0;
double gravity[3] = { 0.0 };
if (use_deck) {
std::string deck_filename = param.get<std::string>("deck_filename");
ParserPtr parser(new Opm::Parser());
Opm::ParseContext parseContext({{ ParseContext::PARSE_RANDOM_SLASH , InputError::IGNORE }});
deck = parser->parseFile(deck_filename , parseContext);
eclipseState.reset(new Opm::EclipseState(deck , parseContext));
// Grid init
grid.reset(new GridManager(deck));
{
const UnstructuredGrid& ug_grid = *(grid->c_grid());
// Rock and fluid init
props.reset(new BlackoilPropertiesFromDeck(deck, eclipseState, ug_grid));
// check_well_controls = param.getDefault("check_well_controls", false);
// max_well_control_iterations = param.getDefault("max_well_control_iterations", 10);
state.reset( new PolymerBlackoilState( UgGridHelpers::numCells( ug_grid ) , UgGridHelpers::numFaces( ug_grid ), 2));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(deck, eclipseState));
// Gravity.
gravity[2] = deck->hasKeyword("NOGRAV") ? 0.0 : unit::gravity;
// Init state variables (saturation and pressure).
if (param.has("init_saturation")) {
initStateBasic(ug_grid, *props, param, gravity[2], *state);
} else {
initStateFromDeck(ug_grid, *props, deck, gravity[2], *state);
}
initBlackoilSurfvol(ug_grid, *props, *state);
// Init polymer properties.
poly_props.readFromDeck(deck, eclipseState);
}
} else {
// Grid init.
const int nx = param.getDefault("nx", 100);
const int ny = param.getDefault("ny", 100);
const int nz = param.getDefault("nz", 1);
const double dx = param.getDefault("dx", 1.0);
const double dy = param.getDefault("dy", 1.0);
const double dz = param.getDefault("dz", 1.0);
grid.reset(new GridManager(nx, ny, nz, dx, dy, dz));
{
const UnstructuredGrid& ug_grid = *(grid->c_grid());
// Rock and fluid init.
props.reset(new BlackoilPropertiesBasic(param, ug_grid.dimensions, UgGridHelpers::numCells( ug_grid )));
state.reset( new PolymerBlackoilState( UgGridHelpers::numCells( ug_grid ) , UgGridHelpers::numFaces( ug_grid ) , 2));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(param));
// Gravity.
gravity[2] = param.getDefault("gravity", 0.0);
// Init state variables (saturation and pressure).
initStateBasic(ug_grid, *props, param, gravity[2], *state);
initBlackoilSurfvol(ug_grid, *props, *state);
// Init Polymer state
if (param.has("poly_init")) {
double poly_init = param.getDefault("poly_init", 0.0);
for (int cell = 0; cell < UgGridHelpers::numCells( ug_grid ); ++cell) {
double smin[2], smax[2];
auto& saturation = state->saturation();
auto& concentration = state->getCellData( state->CONCENTRATION );
auto& max_concentration = state->getCellData( state->CMAX );
props->satRange(1, &cell, smin, smax);
if (saturation[2*cell] > 0.5*(smin[0] + smax[0])) {
concentration[cell] = poly_init;
max_concentration[cell] = poly_init;
} else {
saturation[2*cell + 0] = 0.;
saturation[2*cell + 1] = 1.;
concentration[cell] = 0.;
max_concentration[cell] = 0.;
}
}
}
}
// Init polymer properties.
// Setting defaults to provide a simple example case.
double c_max = param.getDefault("c_max_limit", 5.0);
double mix_param = param.getDefault("mix_param", 1.0);
double rock_density = param.getDefault("rock_density", 1000.0);
double dead_pore_vol = param.getDefault("dead_pore_vol", 0.15);
double res_factor = param.getDefault("res_factor", 1.) ; // res_factor = 1 gives no change in permeability
double c_max_ads = param.getDefault("c_max_ads", 1.);
int ads_index = param.getDefault<int>("ads_index", Opm::PolymerProperties::NoDesorption);
std::vector<double> c_vals_visc(2, -1e100);
c_vals_visc[0] = 0.0;
c_vals_visc[1] = 7.0;
std::vector<double> visc_mult_vals(2, -1e100);
visc_mult_vals[0] = 1.0;
// poly_props.visc_mult_vals[1] = param.getDefault("c_max_viscmult", 30.0);
visc_mult_vals[1] = 20.0;
std::vector<double> c_vals_ads(3, -1e100);
c_vals_ads[0] = 0.0;
c_vals_ads[1] = 2.0;
c_vals_ads[2] = 8.0;
std::vector<double> ads_vals(3, -1e100);
ads_vals[0] = 0.0;
ads_vals[1] = 0.0015;
ads_vals[2] = 0.0025;
// ads_vals[1] = 0.0;
// ads_vals[2] = 0.0;
std::vector<double> water_vel_vals(2, -1e100);
water_vel_vals[0] = 0.0;
water_vel_vals[1] = 10.0;
std::vector<double> shear_vrf_vals(2, -1e100);
shear_vrf_vals[0] = 1.0;
shear_vrf_vals[1] = 1.0;
poly_props.set(c_max, mix_param, rock_density, dead_pore_vol, res_factor, c_max_ads,
static_cast<Opm::PolymerProperties::AdsorptionBehaviour>(ads_index),
c_vals_visc, visc_mult_vals, c_vals_ads, ads_vals, water_vel_vals, shear_vrf_vals);
}
bool use_gravity = (gravity[0] != 0.0 || gravity[1] != 0.0 || gravity[2] != 0.0);
const double *grav = use_gravity ? &gravity[0] : 0;
// Linear solver.
LinearSolverFactory linsolver(param);
// Write parameters used for later reference.
bool output = param.getDefault("output", true);
if (output) {
std::string output_dir =
param.getDefault("output_dir", std::string("output"));
boost::filesystem::path fpath(output_dir);
try {
create_directories(fpath);
}
catch (...) {
OPM_THROW(std::runtime_error, "Creating directories failed: " << fpath);
}
param.writeParam(output_dir + "/simulation.param");
}
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< std::flush;
SimulatorReport rep;
if (!use_deck) {
// Simple simulation without a deck.
PolymerInflowBasic polymer_inflow(param.getDefault("poly_start_days", 300.0)*Opm::unit::day,
param.getDefault("poly_end_days", 800.0)*Opm::unit::day,
param.getDefault("poly_amount", poly_props.cMax()));
WellsManager wells;
SimulatorCompressiblePolymer simulator(param,
*grid->c_grid(),
*props,
poly_props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
polymer_inflow,
linsolver,
grav);
SimulatorTimer simtimer;
simtimer.init(param);
warnIfUnusedParams(param);
WellState well_state;
well_state.init(0, *state);
rep = simulator.run(simtimer, *state, well_state);
} else {
// With a deck, we may have more epochs etc.
WellState well_state;
int step = 0;
Opm::TimeMapPtr timeMap(new Opm::TimeMap(deck));
SimulatorTimer simtimer;
simtimer.init(timeMap);
// Check for WPOLYMER presence in last report step to decide
// polymer injection control type.
const bool use_wpolymer = deck->hasKeyword("WPOLYMER");
if (use_wpolymer) {
if (param.has("poly_start_days")) {
OPM_MESSAGE("Warning: Using WPOLYMER to control injection since it was found in deck. "
"You seem to be trying to control it via parameter poly_start_days (etc.) as well.");
}
}
for (size_t reportStepIdx = 0; reportStepIdx < timeMap->numTimesteps(); ++reportStepIdx) {
simtimer.setCurrentStepNum(reportStepIdx);
// Report on start of report step.
std::cout << "\n\n-------------- Starting report step " << reportStepIdx << " --------------"
<< "\n (number of remaining steps: "
<< simtimer.numSteps() - step << ")\n\n" << std::flush;
// Create new wells, polymer inflow controls.
WellsManager wells(eclipseState , reportStepIdx , *grid->c_grid(), props->permeability());
boost::scoped_ptr<PolymerInflowInterface> polymer_inflow;
if (use_wpolymer) {
if (wells.c_wells() == 0) {
OPM_THROW(std::runtime_error, "Cannot control polymer injection via WPOLYMER without wells.");
}
polymer_inflow.reset(new PolymerInflowFromDeck(eclipseState, *wells.c_wells(), props->numCells(), simtimer.currentStepNum()));
} else {
polymer_inflow.reset(new PolymerInflowBasic(param.getDefault("poly_start_days", 300.0)*Opm::unit::day,
param.getDefault("poly_end_days", 800.0)*Opm::unit::day,
param.getDefault("poly_amount", poly_props.cMax())));
}
// @@@ HACK: we should really make a new well state and
// properly transfer old well state to it every report step,
// since number of wells may change etc.
if (reportStepIdx == 0) {
well_state.init(wells.c_wells(), *state);
}
// Create and run simulator.
SimulatorCompressiblePolymer simulator(param,
*grid->c_grid(),
*props,
poly_props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
*polymer_inflow,
linsolver,
grav);
if (reportStepIdx == 0) {
warnIfUnusedParams(param);
}
SimulatorReport epoch_rep = simulator.run(simtimer, *state, well_state);
// Update total timing report and remember step number.
rep += epoch_rep;
step = simtimer.currentStepNum();
}
}
std::cout << "\n\n================ End of simulation ===============\n\n";
rep.report(std::cout);
}
catch (const std::exception &e) {
std::cerr << "Program threw an exception: " << e.what() << "\n";
throw;
}
SimulatorReport SimulatorCompressibleAd::Impl::run(SimulatorTimer& timer,
BlackoilState& state,
WellState& well_state)
{
std::vector<double> transport_src;
// Initialisation.
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
std::vector<double> initial_porevol = porevol;
// Main simulation loop.
Opm::time::StopWatch pressure_timer;
double ptime = 0.0;
Opm::time::StopWatch transport_timer;
double ttime = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
double init_surfvol[2] = { 0.0 };
double inplace_surfvol[2] = { 0.0 };
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
Opm::computeSaturatedVol(porevol, state.surfacevol(), init_surfvol);
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
Opm::WellReport wellreport;
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
wellreport.push(props_, *wells_,
state.pressure(), state.surfacevol(), state.saturation(),
0.0, well_state.bhp(), well_state.perfRates());
}
std::fstream tstep_os;
if (output_) {
std::string filename = output_dir_ + "/step_timing.param";
tstep_os.open(filename.c_str(), std::fstream::out | std::fstream::app);
}
for (; !timer.done(); ++timer) {
// Report timestep and (optionally) write state to disk.
step_timer.start();
timer.report(std::cout);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
}
SimulatorReport sreport;
// Solve pressure equation.
if (check_well_controls_) {
computeFractionalFlow(props_, allcells_,
state.pressure(), state.surfacevol(), state.saturation(),
fractional_flows);
wells_manager_.applyExplicitReinjectionControls(well_resflows_phase, well_resflows_phase);
}
bool well_control_passed = !check_well_controls_;
int well_control_iteration = 0;
do {
// Run solver.
pressure_timer.start();
std::vector<double> initial_pressure = state.pressure();
psolver_.solve(timer.currentStepLength(), state, well_state);
#if 0
// Renormalize pressure if both fluids and rock are
// incompressible, and there are no pressure
// conditions (bcs or wells). It is deemed sufficient
// for now to renormalize using geometric volume
// instead of pore volume.
if (psolver_.singularPressure()) {
// Compute average pressures of previous and last
// step, and total volume.
double av_prev_press = 0.0;
double av_press = 0.0;
double tot_vol = 0.0;
const int num_cells = grid_.number_of_cells;
for (int cell = 0; cell < num_cells; ++cell) {
av_prev_press += initial_pressure[cell]*grid_.cell_volumes[cell];
av_press += state.pressure()[cell]*grid_.cell_volumes[cell];
tot_vol += grid_.cell_volumes[cell];
}
// Renormalization constant
const double ren_const = (av_prev_press - av_press)/tot_vol;
for (int cell = 0; cell < num_cells; ++cell) {
state.pressure()[cell] += ren_const;
}
const int num_wells = (wells_ == NULL) ? 0 : wells_->number_of_wells;
for (int well = 0; well < num_wells; ++well) {
well_state.bhp()[well] += ren_const;
}
}
#endif
// Stop timer and report.
pressure_timer.stop();
double pt = pressure_timer.secsSinceStart();
std::cout << "Pressure solver took: " << pt << " seconds." << std::endl;
ptime += pt;
sreport.pressure_time = pt;
// Optionally, check if well controls are satisfied.
if (check_well_controls_) {
Opm::computePhaseFlowRatesPerWell(*wells_,
well_state.perfRates(),
fractional_flows,
well_resflows_phase);
std::cout << "Checking well conditions." << std::endl;
// For testing we set surface := reservoir
well_control_passed = wells_manager_.conditionsMet(well_state.bhp(), well_resflows_phase, well_resflows_phase);
++well_control_iteration;
if (!well_control_passed && well_control_iteration > max_well_control_iterations_) {
THROW("Could not satisfy well conditions in " << max_well_control_iterations_ << " tries.");
}
if (!well_control_passed) {
std::cout << "Well controls not passed, solving again." << std::endl;
} else {
std::cout << "Well conditions met." << std::endl;
}
}
} while (!well_control_passed);
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
initial_porevol = porevol;
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
// Process transport sources from well flows.
Opm::computeTransportSource(props_, wells_, well_state, transport_src);
// Solve transport.
transport_timer.start();
double stepsize = timer.currentStepLength();
if (num_transport_substeps_ != 1) {
stepsize /= double(num_transport_substeps_);
std::cout << "Making " << num_transport_substeps_ << " transport substeps." << std::endl;
}
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
for (int tr_substep = 0; tr_substep < num_transport_substeps_; ++tr_substep) {
tsolver_.solve(&state.faceflux()[0], &state.pressure()[0],
&initial_porevol[0], &porevol[0], &transport_src[0], stepsize,
state.saturation(), state.surfacevol());
double substep_injected[2] = { 0.0 };
double substep_produced[2] = { 0.0 };
Opm::computeInjectedProduced(props_, state, transport_src, stepsize,
substep_injected, substep_produced);
injected[0] += substep_injected[0];
injected[1] += substep_injected[1];
produced[0] += substep_produced[0];
produced[1] += substep_produced[1];
if (gravity_ != 0 && use_segregation_split_) {
tsolver_.solveGravity(columns_, stepsize, state.saturation(), state.surfacevol());
}
}
transport_timer.stop();
double tt = transport_timer.secsSinceStart();
sreport.transport_time = tt;
std::cout << "Transport solver took: " << tt << " seconds." << std::endl;
ttime += tt;
// Report volume balances.
Opm::computeSaturatedVol(porevol, state.surfacevol(), inplace_surfvol);
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
std::cout.precision(5);
const int width = 18;
std::cout << "\nMass balance report.\n";
std::cout << " Injected surface volumes: "
<< std::setw(width) << injected[0]
<< std::setw(width) << injected[1] << std::endl;
std::cout << " Produced surface volumes: "
<< std::setw(width) << produced[0]
<< std::setw(width) << produced[1] << std::endl;
std::cout << " Total inj surface volumes: "
<< std::setw(width) << tot_injected[0]
<< std::setw(width) << tot_injected[1] << std::endl;
std::cout << " Total prod surface volumes: "
<< std::setw(width) << tot_produced[0]
<< std::setw(width) << tot_produced[1] << std::endl;
const double balance[2] = { init_surfvol[0] - inplace_surfvol[0] - tot_produced[0] + tot_injected[0],
init_surfvol[1] - inplace_surfvol[1] - tot_produced[1] + tot_injected[1] };
std::cout << " Initial - inplace + inj - prod: "
<< std::setw(width) << balance[0]
<< std::setw(width) << balance[1]
<< std::endl;
std::cout << " Relative mass error: "
<< std::setw(width) << balance[0]/(init_surfvol[0] + tot_injected[0])
<< std::setw(width) << balance[1]/(init_surfvol[1] + tot_injected[1])
<< std::endl;
std::cout.precision(8);
watercut.push(timer.currentTime() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
if (wells_) {
wellreport.push(props_, *wells_,
state.pressure(), state.surfacevol(), state.saturation(),
timer.currentTime() + timer.currentStepLength(),
well_state.bhp(), well_state.perfRates());
}
sreport.total_time = step_timer.secsSinceStart();
if (output_) {
sreport.reportParam(tstep_os);
}
}
if (output_) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
outputWaterCut(watercut, output_dir_);
if (wells_) {
outputWellReport(wellreport, output_dir_);
}
tstep_os.close();
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = ptime;
report.transport_time = ttime;
report.total_time = total_timer.secsSinceStart();
return report;
}
// ----------------- Main program -----------------
int
main(int argc, char** argv)
{
using namespace Opm;
std::cout << "\n================ Test program for incompressible two-phase flow ===============\n\n";
parameter::ParameterGroup param(argc, argv, false);
std::cout << "--------------- Reading parameters ---------------" << std::endl;
// If we have a "deck_filename", grid and props will be read from that.
bool use_deck = param.has("deck_filename");
boost::scoped_ptr<EclipseGridParser> deck;
boost::scoped_ptr<GridManager> grid;
boost::scoped_ptr<IncompPropertiesInterface> props;
boost::scoped_ptr<RockCompressibility> rock_comp;
TwophaseState state;
// bool check_well_controls = false;
// int max_well_control_iterations = 0;
double gravity[3] = { 0.0 };
if (use_deck) {
std::string deck_filename = param.get<std::string>("deck_filename");
deck.reset(new EclipseGridParser(deck_filename));
// Grid init
grid.reset(new GridManager(*deck));
// Rock and fluid init
props.reset(new IncompPropertiesFromDeck(*deck, *grid->c_grid()));
// check_well_controls = param.getDefault("check_well_controls", false);
// max_well_control_iterations = param.getDefault("max_well_control_iterations", 10);
// Rock compressibility.
rock_comp.reset(new RockCompressibility(*deck));
// Gravity.
gravity[2] = deck->hasField("NOGRAV") ? 0.0 : unit::gravity;
// Init state variables (saturation and pressure).
if (param.has("init_saturation")) {
initStateBasic(*grid->c_grid(), *props, param, gravity[2], state);
} else {
initStateFromDeck(*grid->c_grid(), *props, *deck, gravity[2], state);
}
} else {
// Grid init.
const int nx = param.getDefault("nx", 100);
const int ny = param.getDefault("ny", 100);
const int nz = param.getDefault("nz", 1);
const double dx = param.getDefault("dx", 1.0);
const double dy = param.getDefault("dy", 1.0);
const double dz = param.getDefault("dz", 1.0);
grid.reset(new GridManager(nx, ny, nz, dx, dy, dz));
// Rock and fluid init.
props.reset(new IncompPropertiesBasic(param, grid->c_grid()->dimensions, grid->c_grid()->number_of_cells));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(param));
// Gravity.
gravity[2] = param.getDefault("gravity", 0.0);
// Init state variables (saturation and pressure).
initStateBasic(*grid->c_grid(), *props, param, gravity[2], state);
}
// Warn if gravity but no density difference.
bool use_gravity = (gravity[0] != 0.0 || gravity[1] != 0.0 || gravity[2] != 0.0);
if (use_gravity) {
if (props->density()[0] == props->density()[1]) {
std::cout << "**** Warning: nonzero gravity, but zero density difference." << std::endl;
}
}
const double *grav = use_gravity ? &gravity[0] : 0;
// Initialising src
int num_cells = grid->c_grid()->number_of_cells;
std::vector<double> src(num_cells, 0.0);
if (use_deck) {
// Do nothing, wells will be the driving force, not source terms.
} else {
// Compute pore volumes, in order to enable specifying injection rate
// terms of total pore volume.
std::vector<double> porevol;
if (rock_comp->isActive()) {
computePorevolume(*grid->c_grid(), props->porosity(), *rock_comp, state.pressure(), porevol);
} else {
computePorevolume(*grid->c_grid(), props->porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
const double default_injection = use_gravity ? 0.0 : 0.1;
const double flow_per_sec = param.getDefault<double>("injected_porevolumes_per_day", default_injection)
*tot_porevol_init/unit::day;
src[0] = flow_per_sec;
src[num_cells - 1] = -flow_per_sec;
}
// Boundary conditions.
FlowBCManager bcs;
if (param.getDefault("use_pside", false)) {
int pside = param.get<int>("pside");
double pside_pressure = param.get<double>("pside_pressure");
bcs.pressureSide(*grid->c_grid(), FlowBCManager::Side(pside), pside_pressure);
}
// Linear solver.
LinearSolverFactory linsolver(param);
// Write parameters used for later reference.
bool output = param.getDefault("output", true);
std::ofstream epoch_os;
std::string output_dir;
if (output) {
output_dir =
param.getDefault("output_dir", std::string("output"));
boost::filesystem::path fpath(output_dir);
try {
create_directories(fpath);
}
catch (...) {
THROW("Creating directories failed: " << fpath);
}
std::string filename = output_dir + "/epoch_timing.param";
epoch_os.open(filename.c_str(), std::fstream::trunc | std::fstream::out);
// open file to clean it. The file is appended to in SimulatorTwophase
filename = output_dir + "/step_timing.param";
std::fstream step_os(filename.c_str(), std::fstream::trunc | std::fstream::out);
step_os.close();
param.writeParam(output_dir + "/simulation.param");
}
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< " (number of epochs: "
<< (use_deck ? deck->numberOfEpochs() : 1) << ")\n\n" << std::flush;
SimulatorReport rep;
if (!use_deck) {
// Simple simulation without a deck.
WellsManager wells; // no wells.
SimulatorIncompTwophase simulator(param,
*grid->c_grid(),
*props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
src,
bcs.c_bcs(),
linsolver,
grav);
SimulatorTimer simtimer;
simtimer.init(param);
warnIfUnusedParams(param);
WellState well_state;
well_state.init(0, state);
rep = simulator.run(simtimer, state, well_state);
} else {
// With a deck, we may have more epochs etc.
WellState well_state;
int step = 0;
SimulatorTimer simtimer;
// Use timer for last epoch to obtain total time.
deck->setCurrentEpoch(deck->numberOfEpochs() - 1);
simtimer.init(*deck);
const double total_time = simtimer.totalTime();
for (int epoch = 0; epoch < deck->numberOfEpochs(); ++epoch) {
// Set epoch index.
deck->setCurrentEpoch(epoch);
// Update the timer.
if (deck->hasField("TSTEP")) {
simtimer.init(*deck);
} else {
if (epoch != 0) {
THROW("No TSTEP in deck for epoch " << epoch);
}
simtimer.init(param);
}
simtimer.setCurrentStepNum(step);
simtimer.setTotalTime(total_time);
// Report on start of epoch.
std::cout << "\n\n-------------- Starting epoch " << epoch << " --------------"
<< "\n (number of steps: "
<< simtimer.numSteps() - step << ")\n\n" << std::flush;
// Create new wells, well_state
WellsManager wells(*deck, *grid->c_grid(), props->permeability());
// @@@ HACK: we should really make a new well state and
// properly transfer old well state to it every epoch,
// since number of wells may change etc.
if (epoch == 0) {
well_state.init(wells.c_wells(), state);
}
// Create and run simulator.
SimulatorIncompTwophase simulator(param,
*grid->c_grid(),
*props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
src,
bcs.c_bcs(),
linsolver,
grav);
if (epoch == 0) {
warnIfUnusedParams(param);
}
SimulatorReport epoch_rep = simulator.run(simtimer, state, well_state);
if (output) {
epoch_rep.reportParam(epoch_os);
}
// Update total timing report and remember step number.
rep += epoch_rep;
step = simtimer.currentStepNum();
}
}
std::cout << "\n\n================ End of simulation ===============\n\n";
rep.report(std::cout);
if (output) {
std::string filename = output_dir + "/walltime.param";
std::fstream tot_os(filename.c_str(),std::fstream::trunc | std::fstream::out);
rep.reportParam(tot_os);
}
}
// ----------------- Main program -----------------
int
main(int argc, char** argv)
try
{
using namespace Opm;
std::cout << "\n================ Test program for weakly compressible two-phase flow with polymer ===============\n\n";
parameter::ParameterGroup param(argc, argv, false);
std::cout << "--------------- Reading parameters ---------------" << std::endl;
// If we have a "deck_filename", grid and props will be read from that.
bool use_deck = param.has("deck_filename");
boost::scoped_ptr<EclipseGridParser> deck;
boost::scoped_ptr<GridManager> grid;
boost::scoped_ptr<BlackoilPropertiesInterface> props;
boost::scoped_ptr<RockCompressibility> rock_comp;
EclipseStateConstPtr eclipseState;
PolymerBlackoilState state;
Opm::PolymerProperties poly_props;
// bool check_well_controls = false;
// int max_well_control_iterations = 0;
double gravity[3] = { 0.0 };
if (use_deck) {
std::string deck_filename = param.get<std::string>("deck_filename");
ParserPtr parser(new Opm::Parser());
eclipseState.reset(new Opm::EclipseState(parser->parseFile(deck_filename)));
deck.reset(new EclipseGridParser(deck_filename));
// Grid init
grid.reset(new GridManager(*deck));
// Rock and fluid init
props.reset(new BlackoilPropertiesFromDeck(*deck, *grid->c_grid()));
// check_well_controls = param.getDefault("check_well_controls", false);
// max_well_control_iterations = param.getDefault("max_well_control_iterations", 10);
// Rock compressibility.
rock_comp.reset(new RockCompressibility(*deck));
// Gravity.
gravity[2] = deck->hasField("NOGRAV") ? 0.0 : unit::gravity;
// Init state variables (saturation and pressure).
if (param.has("init_saturation")) {
initStateBasic(*grid->c_grid(), *props, param, gravity[2], state);
} else {
initStateFromDeck(*grid->c_grid(), *props, *deck, gravity[2], state);
}
initBlackoilSurfvol(*grid->c_grid(), *props, state);
// Init polymer properties.
poly_props.readFromDeck(*deck);
} else {
// Grid init.
const int nx = param.getDefault("nx", 100);
const int ny = param.getDefault("ny", 100);
const int nz = param.getDefault("nz", 1);
const double dx = param.getDefault("dx", 1.0);
const double dy = param.getDefault("dy", 1.0);
const double dz = param.getDefault("dz", 1.0);
grid.reset(new GridManager(nx, ny, nz, dx, dy, dz));
// Rock and fluid init.
props.reset(new BlackoilPropertiesBasic(param, grid->c_grid()->dimensions, grid->c_grid()->number_of_cells));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(param));
// Gravity.
gravity[2] = param.getDefault("gravity", 0.0);
// Init state variables (saturation and pressure).
initStateBasic(*grid->c_grid(), *props, param, gravity[2], state);
initBlackoilSurfvol(*grid->c_grid(), *props, state);
// Init Polymer state
if (param.has("poly_init")) {
double poly_init = param.getDefault("poly_init", 0.0);
for (int cell = 0; cell < grid->c_grid()->number_of_cells; ++cell) {
double smin[2], smax[2];
props->satRange(1, &cell, smin, smax);
if (state.saturation()[2*cell] > 0.5*(smin[0] + smax[0])) {
state.concentration()[cell] = poly_init;
state.maxconcentration()[cell] = poly_init;
} else {
state.saturation()[2*cell + 0] = 0.;
state.saturation()[2*cell + 1] = 1.;
state.concentration()[cell] = 0.;
state.maxconcentration()[cell] = 0.;
}
}
}
// Init polymer properties.
// Setting defaults to provide a simple example case.
double c_max = param.getDefault("c_max_limit", 5.0);
double mix_param = param.getDefault("mix_param", 1.0);
double rock_density = param.getDefault("rock_density", 1000.0);
double dead_pore_vol = param.getDefault("dead_pore_vol", 0.15);
double res_factor = param.getDefault("res_factor", 1.) ; // res_factor = 1 gives no change in permeability
double c_max_ads = param.getDefault("c_max_ads", 1.);
int ads_index = param.getDefault<int>("ads_index", Opm::PolymerProperties::NoDesorption);
std::vector<double> c_vals_visc(2, -1e100);
c_vals_visc[0] = 0.0;
c_vals_visc[1] = 7.0;
std::vector<double> visc_mult_vals(2, -1e100);
visc_mult_vals[0] = 1.0;
// poly_props.visc_mult_vals[1] = param.getDefault("c_max_viscmult", 30.0);
visc_mult_vals[1] = 20.0;
std::vector<double> c_vals_ads(3, -1e100);
c_vals_ads[0] = 0.0;
c_vals_ads[1] = 2.0;
c_vals_ads[2] = 8.0;
std::vector<double> ads_vals(3, -1e100);
ads_vals[0] = 0.0;
ads_vals[1] = 0.0015;
ads_vals[2] = 0.0025;
// ads_vals[1] = 0.0;
// ads_vals[2] = 0.0;
poly_props.set(c_max, mix_param, rock_density, dead_pore_vol, res_factor, c_max_ads,
static_cast<Opm::PolymerProperties::AdsorptionBehaviour>(ads_index),
c_vals_visc, visc_mult_vals, c_vals_ads, ads_vals);
}
bool use_gravity = (gravity[0] != 0.0 || gravity[1] != 0.0 || gravity[2] != 0.0);
const double *grav = use_gravity ? &gravity[0] : 0;
// Initialising src
int num_cells = grid->c_grid()->number_of_cells;
std::vector<double> src(num_cells, 0.0);
if (use_deck) {
// Do nothing, wells will be the driving force, not source terms.
} else {
// Compute pore volumes, in order to enable specifying injection rate
// terms of total pore volume.
std::vector<double> porevol;
if (rock_comp->isActive()) {
computePorevolume(*grid->c_grid(), props->porosity(), *rock_comp, state.pressure(), porevol);
} else {
computePorevolume(*grid->c_grid(), props->porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
const double default_injection = use_gravity ? 0.0 : 0.1;
const double flow_per_sec = param.getDefault<double>("injected_porevolumes_per_day", default_injection)
*tot_porevol_init/unit::day;
src[0] = flow_per_sec;
src[num_cells - 1] = -flow_per_sec;
}
// Boundary conditions.
FlowBCManager bcs;
if (param.getDefault("use_pside", false)) {
int pside = param.get<int>("pside");
double pside_pressure = param.get<double>("pside_pressure");
bcs.pressureSide(*grid->c_grid(), FlowBCManager::Side(pside), pside_pressure);
}
// Linear solver.
LinearSolverFactory linsolver(param);
// Write parameters used for later reference.
bool output = param.getDefault("output", true);
if (output) {
std::string output_dir =
param.getDefault("output_dir", std::string("output"));
boost::filesystem::path fpath(output_dir);
try {
create_directories(fpath);
}
catch (...) {
OPM_THROW(std::runtime_error, "Creating directories failed: " << fpath);
}
param.writeParam(output_dir + "/simulation.param");
}
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< " (number of epochs: "
<< (use_deck ? deck->numberOfEpochs() : 1) << ")\n\n" << std::flush;
SimulatorReport rep;
if (!use_deck) {
// Simple simulation without a deck.
PolymerInflowBasic polymer_inflow(param.getDefault("poly_start_days", 300.0)*Opm::unit::day,
param.getDefault("poly_end_days", 800.0)*Opm::unit::day,
param.getDefault("poly_amount", poly_props.cMax()));
WellsManager wells;
SimulatorCompressiblePolymer simulator(param,
*grid->c_grid(),
*props,
poly_props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
polymer_inflow,
src,
bcs.c_bcs(),
linsolver,
grav);
SimulatorTimer simtimer;
simtimer.init(param);
warnIfUnusedParams(param);
WellState well_state;
well_state.init(0, state);
rep = simulator.run(simtimer, state, well_state);
} else {
// With a deck, we may have more epochs etc.
WellState well_state;
int step = 0;
SimulatorTimer simtimer;
// Use timer for last epoch to obtain total time.
deck->setCurrentEpoch(deck->numberOfEpochs() - 1);
simtimer.init(*deck);
const double total_time = simtimer.totalTime();
// Check for WPOLYMER presence in last epoch to decide
// polymer injection control type.
const bool use_wpolymer = deck->hasField("WPOLYMER");
if (use_wpolymer) {
if (param.has("poly_start_days")) {
OPM_MESSAGE("Warning: Using WPOLYMER to control injection since it was found in deck. "
"You seem to be trying to control it via parameter poly_start_days (etc.) as well.");
}
}
for (int epoch = 0; epoch < deck->numberOfEpochs(); ++epoch) {
// Set epoch index.
deck->setCurrentEpoch(epoch);
// Update the timer.
if (deck->hasField("TSTEP")) {
simtimer.init(*deck);
} else {
if (epoch != 0) {
OPM_THROW(std::runtime_error, "No TSTEP in deck for epoch " << epoch);
}
simtimer.init(param);
}
simtimer.setCurrentStepNum(step);
simtimer.setTotalTime(total_time);
// Report on start of epoch.
std::cout << "\n\n-------------- Starting epoch " << epoch << " --------------"
<< "\n (number of steps: "
<< simtimer.numSteps() - step << ")\n\n" << std::flush;
// Create new wells, polymer inflow controls.
WellsManager wells(eclipseState , epoch , *grid->c_grid(), props->permeability());
boost::scoped_ptr<PolymerInflowInterface> polymer_inflow;
if (use_wpolymer) {
if (wells.c_wells() == 0) {
OPM_THROW(std::runtime_error, "Cannot control polymer injection via WPOLYMER without wells.");
}
polymer_inflow.reset(new PolymerInflowFromDeck(*deck, *wells.c_wells(), props->numCells()));
} else {
polymer_inflow.reset(new PolymerInflowBasic(param.getDefault("poly_start_days", 300.0)*Opm::unit::day,
param.getDefault("poly_end_days", 800.0)*Opm::unit::day,
param.getDefault("poly_amount", poly_props.cMax())));
}
// @@@ HACK: we should really make a new well state and
// properly transfer old well state to it every epoch,
// since number of wells may change etc.
if (epoch == 0) {
well_state.init(wells.c_wells(), state);
}
// Create and run simulator.
SimulatorCompressiblePolymer simulator(param,
*grid->c_grid(),
*props,
poly_props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
*polymer_inflow,
src,
bcs.c_bcs(),
linsolver,
grav);
if (epoch == 0) {
warnIfUnusedParams(param);
}
SimulatorReport epoch_rep = simulator.run(simtimer, state, well_state);
// Update total timing report and remember step number.
rep += epoch_rep;
step = simtimer.currentStepNum();
}
}
std::cout << "\n\n================ End of simulation ===============\n\n";
rep.report(std::cout);
}
catch (const std::exception &e) {
std::cerr << "Program threw an exception: " << e.what() << "\n";
throw;
}
SimulatorReport SimulatorPolymer::Impl::run(SimulatorTimer& timer,
PolymerState& state,
WellState& well_state)
{
std::vector<double> transport_src;
// Initialisation.
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
// Main simulation loop.
Opm::time::StopWatch pressure_timer;
double ptime = 0.0;
Opm::time::StopWatch transport_timer;
double ttime = 0.0;
Opm::time::StopWatch total_timer;
total_timer.start();
double init_satvol[2] = { 0.0 };
double init_polymass = 0.0;
double satvol[2] = { 0.0 };
double polymass = 0.0;
double polymass_adsorbed = 0.0;
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
double polyinj = 0.0;
double polyprod = 0.0;
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
double tot_polyinj = 0.0;
double tot_polyprod = 0.0;
Opm::computeSaturatedVol(porevol, state.saturation(), init_satvol);
std::cout << "\nInitial saturations are " << init_satvol[0]/tot_porevol_init
<< " " << init_satvol[1]/tot_porevol_init << std::endl;
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
Opm::WellReport wellreport;
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
wellreport.push(props_, *wells_, state.saturation(), 0.0, well_state.bhp(), well_state.perfRates());
}
for (; !timer.done(); ++timer) {
// Report timestep and (optionally) write state to disk.
timer.report(std::cout);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
outputState(grid_, state, timer.currentStepNum(), output_dir_);
}
// Solve pressure.
do {
pressure_timer.start();
psolver_.solve(timer.currentStepLength(), state, well_state);
pressure_timer.stop();
double pt = pressure_timer.secsSinceStart();
std::cout << "Pressure solver took: " << pt << " seconds." << std::endl;
ptime += pt;
} while (false);
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
// Process transport sources (to include bdy terms and well flows).
Opm::computeTransportSource(grid_, src_, state.faceflux(), 1.0,
wells_, well_state.perfRates(), transport_src);
// Find inflow rate.
const double current_time = timer.currentTime();
double stepsize = timer.currentStepLength();
const double inflowc0 = poly_inflow_(current_time + 1e-5*stepsize);
const double inflowc1 = poly_inflow_(current_time + (1.0 - 1e-5)*stepsize);
if (inflowc0 != inflowc1) {
std::cout << "**** Warning: polymer inflow rate changes during timestep. Using rate near start of step.";
}
const double inflow_c = inflowc0;
// Solve transport.
transport_timer.start();
if (num_transport_substeps_ != 1) {
stepsize /= double(num_transport_substeps_);
std::cout << "Making " << num_transport_substeps_ << " transport substeps." << std::endl;
}
for (int tr_substep = 0; tr_substep < num_transport_substeps_; ++tr_substep) {
tsolver_.solve(&state.faceflux()[0], &porevol[0], &transport_src[0], stepsize, inflow_c,
state.saturation(), state.concentration(), state.maxconcentration());
Opm::computeInjectedProduced(props_, poly_props_,
state.saturation(), state.concentration(), state.maxconcentration(),
transport_src, timer.currentStepLength(), inflow_c,
injected, produced, polyinj, polyprod);
if (use_segregation_split_) {
tsolver_.solveGravity(columns_, &porevol[0], stepsize,
state.saturation(), state.concentration(), state.maxconcentration());
}
}
transport_timer.stop();
double tt = transport_timer.secsSinceStart();
std::cout << "Transport solver took: " << tt << " seconds." << std::endl;
ttime += tt;
// Report volume balances.
Opm::computeSaturatedVol(porevol, state.saturation(), satvol);
polymass = Opm::computePolymerMass(porevol, state.saturation(), state.concentration(), poly_props_.deadPoreVol());
polymass_adsorbed = Opm::computePolymerAdsorbed(props_, poly_props_, porevol, state.maxconcentration());
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
tot_polyinj += polyinj;
tot_polyprod += polyprod;
std::cout.precision(5);
const int width = 18;
std::cout << "\nVolume and polymer mass balance: "
" water(pv) oil(pv) polymer(kg)\n";
std::cout << " Saturated volumes: "
<< std::setw(width) << satvol[0]/tot_porevol_init
<< std::setw(width) << satvol[1]/tot_porevol_init
<< std::setw(width) << polymass << std::endl;
std::cout << " Adsorbed volumes: "
<< std::setw(width) << 0.0
<< std::setw(width) << 0.0
<< std::setw(width) << polymass_adsorbed << std::endl;
std::cout << " Injected volumes: "
<< std::setw(width) << injected[0]/tot_porevol_init
<< std::setw(width) << injected[1]/tot_porevol_init
<< std::setw(width) << polyinj << std::endl;
std::cout << " Produced volumes: "
<< std::setw(width) << produced[0]/tot_porevol_init
<< std::setw(width) << produced[1]/tot_porevol_init
<< std::setw(width) << polyprod << std::endl;
std::cout << " Total inj volumes: "
<< std::setw(width) << tot_injected[0]/tot_porevol_init
<< std::setw(width) << tot_injected[1]/tot_porevol_init
<< std::setw(width) << tot_polyinj << std::endl;
std::cout << " Total prod volumes: "
<< std::setw(width) << tot_produced[0]/tot_porevol_init
<< std::setw(width) << tot_produced[1]/tot_porevol_init
<< std::setw(width) << tot_polyprod << std::endl;
std::cout << " In-place + prod - inj: "
<< std::setw(width) << (satvol[0] + tot_produced[0] - tot_injected[0])/tot_porevol_init
<< std::setw(width) << (satvol[1] + tot_produced[1] - tot_injected[1])/tot_porevol_init
<< std::setw(width) << (polymass + tot_polyprod - tot_polyinj + polymass_adsorbed) << std::endl;
std::cout << " Init - now - pr + inj: "
<< std::setw(width) << (init_satvol[0] - satvol[0] - tot_produced[0] + tot_injected[0])/tot_porevol_init
<< std::setw(width) << (init_satvol[1] - satvol[1] - tot_produced[1] + tot_injected[1])/tot_porevol_init
<< std::setw(width) << (init_polymass - polymass - tot_polyprod + tot_polyinj - polymass_adsorbed)
<< std::endl;
std::cout.precision(8);
watercut.push(timer.currentTime() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
if (wells_) {
wellreport.push(props_, *wells_, state.saturation(),
timer.currentTime() + timer.currentStepLength(),
well_state.bhp(), well_state.perfRates());
}
}
if (output_) {
outputState(grid_, state, timer.currentStepNum(), output_dir_);
outputWaterCut(watercut, output_dir_);
if (wells_) {
outputWellReport(wellreport, output_dir_);
}
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = ptime;
report.transport_time = ttime;
report.total_time = total_timer.secsSinceStart();
return report;
}
// ----------------- Main program -----------------
int
main(int argc, char** argv)
try
{
using namespace Opm;
std::cout << "\n================ Test program for incompressible two-phase flow ===============\n\n";
parameter::ParameterGroup param(argc, argv, false);
std::cout << "--------------- Reading parameters ---------------" << std::endl;
#if ! HAVE_SUITESPARSE_UMFPACK_H
// This is an extra check to intercept a potentially invalid request for the
// implicit transport solver as early as possible for the user.
{
const bool use_reorder = param.getDefault("use_reorder", true);
if (!use_reorder) {
OPM_THROW(std::runtime_error, "Cannot use implicit transport solver without UMFPACK. "
"Either reconfigure opm-core with SuiteSparse/UMFPACK support and recompile, "
"or use the reordering solver (use_reorder=true).");
}
}
#endif
// If we have a "deck_filename", grid and props will be read from that.
bool use_deck = param.has("deck_filename");
EclipseStateConstPtr eclipseState;
Opm::DeckConstPtr deck;
std::unique_ptr<GridManager> grid;
std::unique_ptr<IncompPropertiesInterface> props;
std::unique_ptr<RockCompressibility> rock_comp;
std::unique_ptr<TwophaseState> state;
// bool check_well_controls = false;
// int max_well_control_iterations = 0;
double gravity[3] = { 0.0 };
if (use_deck) {
ParserPtr parser(new Opm::Parser());
ParseContext parseContext;
std::string deck_filename = param.get<std::string>("deck_filename");
deck = parser->parseFile(deck_filename , parseContext);
eclipseState.reset( new EclipseState(*deck, parseContext));
// Grid init
grid.reset(new GridManager(*eclipseState->getInputGrid()));
{
const UnstructuredGrid& ug_grid = *(grid->c_grid());
// Rock and fluid init
props.reset(new IncompPropertiesFromDeck(deck, eclipseState, ug_grid));
state.reset( new TwophaseState( UgGridHelpers::numCells( ug_grid ) , UgGridHelpers::numFaces( ug_grid )));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(deck, eclipseState));
// Gravity.
gravity[2] = deck->hasKeyword("NOGRAV") ? 0.0 : unit::gravity;
// Init state variables (saturation and pressure).
if (param.has("init_saturation")) {
initStateBasic(ug_grid, *props, param, gravity[2], *state);
} else {
initStateFromDeck(ug_grid, *props, deck, gravity[2], *state);
}
}
} else {
// Grid init.
const int nx = param.getDefault("nx", 100);
const int ny = param.getDefault("ny", 100);
const int nz = param.getDefault("nz", 1);
const double dx = param.getDefault("dx", 1.0);
const double dy = param.getDefault("dy", 1.0);
const double dz = param.getDefault("dz", 1.0);
grid.reset(new GridManager(nx, ny, nz, dx, dy, dz));
{
const UnstructuredGrid& ug_grid = *(grid->c_grid());
// Rock and fluid init.
props.reset(new IncompPropertiesBasic(param, ug_grid.dimensions, UgGridHelpers::numCells( ug_grid )));
state.reset( new TwophaseState( UgGridHelpers::numCells( ug_grid ) , UgGridHelpers::numFaces( ug_grid )));
// Rock compressibility.
rock_comp.reset(new RockCompressibility(param));
// Gravity.
gravity[2] = param.getDefault("gravity", 0.0);
// Init state variables (saturation and pressure).
initStateBasic(ug_grid, *props, param, gravity[2], *state);
}
}
// Warn if gravity but no density difference.
bool use_gravity = (gravity[0] != 0.0 || gravity[1] != 0.0 || gravity[2] != 0.0);
if (use_gravity) {
if (props->density()[0] == props->density()[1]) {
std::cout << "**** Warning: nonzero gravity, but zero density difference." << std::endl;
}
}
const double *grav = use_gravity ? &gravity[0] : 0;
// Initialising src
int num_cells = grid->c_grid()->number_of_cells;
std::vector<double> src(num_cells, 0.0);
if (use_deck) {
// Do nothing, wells will be the driving force, not source terms.
} else {
// Compute pore volumes, in order to enable specifying injection rate
// terms of total pore volume.
std::vector<double> porevol;
if (rock_comp->isActive()) {
computePorevolume(*grid->c_grid(), props->porosity(), *rock_comp, state->pressure(), porevol);
} else {
computePorevolume(*grid->c_grid(), props->porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
const double default_injection = use_gravity ? 0.0 : 0.1;
const double flow_per_sec = param.getDefault<double>("injected_porevolumes_per_day", default_injection)
*tot_porevol_init/unit::day;
src[0] = flow_per_sec;
src[num_cells - 1] = -flow_per_sec;
}
// Boundary conditions.
FlowBCManager bcs;
if (param.getDefault("use_pside", false)) {
int pside = param.get<int>("pside");
double pside_pressure = param.get<double>("pside_pressure");
bcs.pressureSide(*grid->c_grid(), FlowBCManager::Side(pside), pside_pressure);
}
// Linear solver.
LinearSolverFactory linsolver(param);
// Write parameters used for later reference.
bool output = param.getDefault("output", true);
std::ofstream epoch_os;
std::string output_dir;
if (output) {
output_dir =
param.getDefault("output_dir", std::string("output"));
boost::filesystem::path fpath(output_dir);
try {
create_directories(fpath);
}
catch (...) {
OPM_THROW(std::runtime_error, "Creating directories failed: " << fpath);
}
std::string filename = output_dir + "/epoch_timing.param";
epoch_os.open(filename.c_str(), std::fstream::trunc | std::fstream::out);
// open file to clean it. The file is appended to in SimulatorTwophase
filename = output_dir + "/step_timing.param";
std::fstream step_os(filename.c_str(), std::fstream::trunc | std::fstream::out);
step_os.close();
param.writeParam(output_dir + "/simulation.param");
}
SimulatorReport rep;
if (!use_deck) {
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< " (number of report steps: 1)\n\n" << std::flush;
// Simple simulation without a deck.
WellsManager wells; // no wells.
SimulatorIncompTwophase simulator(param,
*grid->c_grid(),
*props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
src,
bcs.c_bcs(),
linsolver,
grav);
SimulatorTimer simtimer;
simtimer.init(param);
warnIfUnusedParams(param);
WellState well_state;
well_state.init(0, *state);
rep = simulator.run(simtimer, *state, well_state);
} else {
// With a deck, we may have more epochs etc.
Opm::TimeMapConstPtr timeMap = eclipseState->getSchedule()->getTimeMap();
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< " (number of report steps: "
<< timeMap->numTimesteps() << ")\n\n" << std::flush;
WellState well_state;
int step = 0;
SimulatorTimer simtimer;
// Use timer for last epoch to obtain total time.
simtimer.init(timeMap);
const double total_time = simtimer.totalTime();
// for (size_t reportStepIdx = 0; reportStepIdx < timeMap->numTimesteps(); ++reportStepIdx) {
size_t reportStepIdx = 0; // Only handle a single, unchanging well setup.
{
// Update the timer.
simtimer.setCurrentStepNum(step);
simtimer.setTotalTime(total_time);
// Report on start of report step.
// std::cout << "\n\n-------------- Starting report step " << reportStepIdx << " --------------"
// << "\n (number of time steps: "
// << simtimer.numSteps() - step << ")\n\n" << std::flush;
// Create new wells, well_state
WellsManager wells(eclipseState , reportStepIdx , *grid->c_grid(), props->permeability());
// @@@ HACK: we should really make a new well state and
// properly transfer old well state to it every report step,
// since number of wells may change etc.
if (reportStepIdx == 0) {
well_state.init(wells.c_wells(), *state);
}
// Create and run simulator.
SimulatorIncompTwophase simulator(param,
*grid->c_grid(),
*props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
src,
bcs.c_bcs(),
linsolver,
grav);
if (reportStepIdx == 0) {
warnIfUnusedParams(param);
}
SimulatorReport epoch_rep = simulator.run(simtimer, *state, well_state);
if (output) {
epoch_rep.reportParam(epoch_os);
}
// Update total timing report and remember step number.
rep += epoch_rep;
step = simtimer.currentStepNum();
}
}
std::cout << "\n\n================ End of simulation ===============\n\n";
rep.report(std::cout);
if (output) {
std::string filename = output_dir + "/walltime.param";
std::fstream tot_os(filename.c_str(),std::fstream::trunc | std::fstream::out);
rep.reportParam(tot_os);
}
}
catch (const std::exception &e) {
std::cerr << "Program threw an exception: " << e.what() << "\n";
throw;
}
SimulatorReport SimulatorIncompTwophase::Impl::run(SimulatorTimer& timer,
TwophaseState& state,
WellState& well_state)
{
std::vector<double> transport_src;
// Initialisation.
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
std::vector<double> initial_porevol = porevol;
// Main simulation loop.
Opm::time::StopWatch pressure_timer;
double ptime = 0.0;
Opm::time::StopWatch transport_timer;
double ttime = 0.0;
Opm::time::StopWatch callback_timer;
double time_in_callbacks = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
double init_satvol[2] = { 0.0 };
double satvol[2] = { 0.0 };
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
Opm::computeSaturatedVol(porevol, state.saturation(), init_satvol);
*log_ << "\nInitial saturations are " << init_satvol[0]/tot_porevol_init
<< " " << init_satvol[1]/tot_porevol_init << std::endl;
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
Opm::WellReport wellreport;
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
wellreport.push(props_, *wells_, state.saturation(), 0.0, well_state.bhp(), well_state.perfRates());
}
std::fstream tstep_os;
if (output_) {
std::string filename = output_dir_ + "/step_timing.param";
tstep_os.open(filename.c_str(), std::fstream::out | std::fstream::app);
}
while (!timer.done()) {
// Report timestep and (optionally) write state to disk.
step_timer.start();
timer.report(*log_);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
if (use_reorder_) {
// This use of dynamic_cast is not ideal, but should be safe.
outputVectorMatlab(std::string("reorder_it"),
dynamic_cast<const TransportSolverTwophaseReorder&>(*tsolver_).getReorderIterations(),
timer.currentStepNum(), output_dir_);
}
}
SimulatorReport sreport;
// Solve pressure equation.
if (check_well_controls_) {
computeFractionalFlow(props_, allcells_, state.saturation(), fractional_flows);
wells_manager_.applyExplicitReinjectionControls(well_resflows_phase, well_resflows_phase);
}
bool well_control_passed = !check_well_controls_;
int well_control_iteration = 0;
do {
// Run solver.
pressure_timer.start();
std::vector<double> initial_pressure = state.pressure();
psolver_.solve(timer.currentStepLength(), state, well_state);
// Renormalize pressure if rock is incompressible, and
// there are no pressure conditions (bcs or wells).
// It is deemed sufficient for now to renormalize
// using geometric volume instead of pore volume.
if ((rock_comp_props_ == NULL || !rock_comp_props_->isActive())
&& allNeumannBCs(bcs_) && allRateWells(wells_)) {
// Compute average pressures of previous and last
// step, and total volume.
double av_prev_press = 0.0;
double av_press = 0.0;
double tot_vol = 0.0;
const int num_cells = grid_.number_of_cells;
for (int cell = 0; cell < num_cells; ++cell) {
av_prev_press += initial_pressure[cell]*grid_.cell_volumes[cell];
av_press += state.pressure()[cell]*grid_.cell_volumes[cell];
tot_vol += grid_.cell_volumes[cell];
}
// Renormalization constant
const double ren_const = (av_prev_press - av_press)/tot_vol;
for (int cell = 0; cell < num_cells; ++cell) {
state.pressure()[cell] += ren_const;
}
const int num_wells = (wells_ == NULL) ? 0 : wells_->number_of_wells;
for (int well = 0; well < num_wells; ++well) {
well_state.bhp()[well] += ren_const;
}
}
// Stop timer and report.
pressure_timer.stop();
double pt = pressure_timer.secsSinceStart();
*log_ << "Pressure solver took: " << pt << " seconds." << std::endl;
ptime += pt;
sreport.pressure_time = pt;
// Optionally, check if well controls are satisfied.
if (check_well_controls_) {
Opm::computePhaseFlowRatesPerWell(*wells_,
well_state.perfRates(),
fractional_flows,
well_resflows_phase);
*log_ << "Checking well conditions." << std::endl;
// For testing we set surface := reservoir
well_control_passed = wells_manager_.conditionsMet(well_state.bhp(), well_resflows_phase, well_resflows_phase);
++well_control_iteration;
if (!well_control_passed && well_control_iteration > max_well_control_iterations_) {
OPM_THROW(std::runtime_error, "Could not satisfy well conditions in " << max_well_control_iterations_ << " tries.");
}
if (!well_control_passed) {
*log_ << "Well controls not passed, solving again." << std::endl;
} else {
*log_ << "Well conditions met." << std::endl;
}
}
} while (!well_control_passed);
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
initial_porevol = porevol;
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
// Process transport sources (to include bdy terms and well flows).
Opm::computeTransportSource(grid_, src_, state.faceflux(), 1.0,
wells_, well_state.perfRates(), transport_src);
// Solve transport.
transport_timer.start();
double stepsize = timer.currentStepLength();
if (num_transport_substeps_ != 1) {
stepsize /= double(num_transport_substeps_);
*log_ << "Making " << num_transport_substeps_ << " transport substeps." << std::endl;
}
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
for (int tr_substep = 0; tr_substep < num_transport_substeps_; ++tr_substep) {
tsolver_->solve(&initial_porevol[0], &transport_src[0], stepsize, state);
double substep_injected[2] = { 0.0 };
double substep_produced[2] = { 0.0 };
Opm::computeInjectedProduced(props_, state.saturation(), transport_src, stepsize,
substep_injected, substep_produced);
injected[0] += substep_injected[0];
injected[1] += substep_injected[1];
produced[0] += substep_produced[0];
produced[1] += substep_produced[1];
if (use_reorder_ && use_segregation_split_) {
// Again, unfortunate but safe use of dynamic_cast.
// Possible solution: refactor gravity solver to its own class.
dynamic_cast<TransportSolverTwophaseReorder&>(*tsolver_)
.solveGravity(&initial_porevol[0], stepsize, state);
}
watercut.push(timer.simulationTimeElapsed() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
if (wells_) {
wellreport.push(props_, *wells_, state.saturation(),
timer.simulationTimeElapsed() + timer.currentStepLength(),
well_state.bhp(), well_state.perfRates());
}
}
transport_timer.stop();
double tt = transport_timer.secsSinceStart();
sreport.transport_time = tt;
*log_ << "Transport solver took: " << tt << " seconds." << std::endl;
ttime += tt;
// Report volume balances.
Opm::computeSaturatedVol(porevol, state.saturation(), satvol);
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
reportVolumes(*log_, satvol, tot_porevol_init,
tot_injected, tot_produced,
injected, produced,
init_satvol);
sreport.total_time = step_timer.secsSinceStart();
if (output_) {
sreport.reportParam(tstep_os);
}
// advance the timer to the end of the timestep *before* notifying
// the client that the timestep is done
++timer;
// notify all clients that we are done with the timestep
callback_timer.start ();
timestep_completed_.signal ();
callback_timer.stop ();
time_in_callbacks += callback_timer.secsSinceStart ();
}
if (output_) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
if (use_reorder_) {
// This use of dynamic_cast is not ideal, but should be safe.
outputVectorMatlab(std::string("reorder_it"),
dynamic_cast<const TransportSolverTwophaseReorder&>(*tsolver_).getReorderIterations(),
timer.currentStepNum(), output_dir_);
}
outputWaterCut(watercut, output_dir_);
if (wells_) {
outputWellReport(wellreport, output_dir_);
}
tstep_os.close();
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = ptime;
report.transport_time = ttime;
report.total_time = total_timer.secsSinceStart() - time_in_callbacks;
return report;
}
SimulatorReport SimulatorFullyImplicitCompressiblePolymer::Impl::run(SimulatorTimer& timer,
PolymerBlackoilState& state)
{
WellStateFullyImplicitBlackoil prev_well_state;
// Initialisation.
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
std::vector<double> initial_porevol = porevol;
std::vector<double> polymer_inflow_c(grid_.number_of_cells);
// Main simulation loop.
Opm::time::StopWatch solver_timer;
double stime = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
std::string tstep_filename = output_dir_ + "/step_timing.txt";
std::ofstream tstep_os(tstep_filename.c_str());
//Main simulation loop.
while (!timer.done()) {
#if 0
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
}
std::fstream tstep_os;
if (output_) {
std::string filename = output_dir_ + "/step_timing.param";
tstep_os.open(filename.c_str(), std::fstream::out | std::fstream::app);
}
#endif
// Report timestep and (optionally) write state to disk.
step_timer.start();
timer.report(std::cout);
WellsManager wells_manager(eclipse_state_,
timer.currentStepNum(),
Opm::UgGridHelpers::numCells(grid_),
Opm::UgGridHelpers::globalCell(grid_),
Opm::UgGridHelpers::cartDims(grid_),
Opm::UgGridHelpers::dimensions(grid_),
Opm::UgGridHelpers::cell2Faces(grid_),
Opm::UgGridHelpers::beginFaceCentroids(grid_),
props_.permeability());
const Wells* wells = wells_manager.c_wells();
WellStateFullyImplicitBlackoil well_state;
well_state.init(wells, state.blackoilState(), prev_well_state);
//Compute polymer inflow.
std::unique_ptr<PolymerInflowInterface> polymer_inflow_ptr;
if (deck_->hasKeyword("WPOLYMER")) {
if (wells_manager.c_wells() == 0) {
OPM_THROW(std::runtime_error, "Cannot control polymer injection via WPOLYMER without wells.");
}
polymer_inflow_ptr.reset(new PolymerInflowFromDeck(deck_, eclipse_state_, *wells, Opm::UgGridHelpers::numCells(grid_), timer.currentStepNum()));
} else {
polymer_inflow_ptr.reset(new PolymerInflowBasic(0.0*Opm::unit::day,
1.0*Opm::unit::day,
0.0));
}
std::vector<double> polymer_inflow_c(Opm::UgGridHelpers::numCells(grid_));
polymer_inflow_ptr->getInflowValues(timer.simulationTimeElapsed(),
timer.simulationTimeElapsed() + timer.currentStepLength(),
polymer_inflow_c);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
}
if (output_) {
if (timer.currentStepNum() == 0) {
output_writer_.writeInit(timer);
}
output_writer_.writeTimeStep(timer, state.blackoilState(), well_state);
}
// Run solver.
solver_timer.start();
FullyImplicitCompressiblePolymerSolver solver(grid_, props_, geo_, rock_comp_props_, polymer_props_, *wells_manager.c_wells(), linsolver_);
solver.step(timer.currentStepLength(), state, well_state, polymer_inflow_c);
// Stop timer and report.
solver_timer.stop();
const double st = solver_timer.secsSinceStart();
std::cout << "Fully implicit solver took: " << st << " seconds." << std::endl;
stime += st;
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
initial_porevol = porevol;
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
/*
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
double polyinj = 0;
double polyprod = 0;
Opm::computeInjectedProduced(props_, polymer_props_,
state,
transport_src, polymer_inflow_c, timer.currentStepLength(),
injected, produced,
polyinj, polyprod);
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
watercut.push(timer.simulationTimeElapsed() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
std::cout.precision(5);
const int width = 18;
std::cout << "\nMass balance report.\n";
std::cout << " Injected reservoir volumes: "
<< std::setw(width) << injected[0]
<< std::setw(width) << injected[1] << std::endl;
std::cout << " Produced reservoir volumes: "
<< std::setw(width) << produced[0]
<< std::setw(width) << produced[1] << std::endl;
std::cout << " Total inj reservoir volumes: "
<< std::setw(width) << tot_injected[0]
<< std::setw(width) << tot_injected[1] << std::endl;
std::cout << " Total prod reservoir volumes: "
<< std::setw(width) << tot_produced[0]
<< std::setw(width) << tot_produced[1] << std::endl;
*/
if (output_) {
SimulatorReport step_report;
step_report.pressure_time = st;
step_report.total_time = step_timer.secsSinceStart();
step_report.reportParam(tstep_os);
}
++timer;
prev_well_state = well_state;
}
// Write final simulation state.
if (output_) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
output_writer_.writeTimeStep(timer, state.blackoilState(), prev_well_state);
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = stime;
report.transport_time = 0.0;
report.total_time = total_timer.secsSinceStart();
return report;
}
SimulatorReport SimulatorFullyImplicitBlackoil::Impl::run(SimulatorTimer& timer,
BlackoilState& state,
WellState& well_state)
{
// Initialisation.
std::vector<double> porevol;
if (rock_comp_props_ && rock_comp_props_->isActive()) {
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
} else {
computePorevolume(grid_, props_.porosity(), porevol);
}
// const double tot_porevol_init = std::accumulate(porevol.begin(), porevol.end(), 0.0);
std::vector<double> initial_porevol = porevol;
// Main simulation loop.
Opm::time::StopWatch solver_timer;
double stime = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
#if 0
// These must be changed for three-phase.
double init_surfvol[2] = { 0.0 };
double inplace_surfvol[2] = { 0.0 };
double tot_injected[2] = { 0.0 };
double tot_produced[2] = { 0.0 };
Opm::computeSaturatedVol(porevol, state.surfacevol(), init_surfvol);
Opm::Watercut watercut;
watercut.push(0.0, 0.0, 0.0);
Opm::WellReport wellreport;
#endif
std::vector<double> fractional_flows;
std::vector<double> well_resflows_phase;
if (wells_) {
well_resflows_phase.resize((wells_->number_of_phases)*(wells_->number_of_wells), 0.0);
#if 0
wellreport.push(props_, *wells_,
state.pressure(), state.surfacevol(), state.saturation(),
0.0, well_state.bhp(), well_state.perfRates());
#endif
}
std::fstream tstep_os;
if (output_) {
std::string filename = output_dir_ + "/step_timing.param";
tstep_os.open(filename.c_str(), std::fstream::out | std::fstream::app);
}
for (; !timer.done(); ++timer) {
// Report timestep and (optionally) write state to disk.
step_timer.start();
timer.report(std::cout);
if (output_ && (timer.currentStepNum() % output_interval_ == 0)) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
outputWellStateMatlab(well_state,timer.currentStepNum(), output_dir_);
}
SimulatorReport sreport;
// Solve pressure equation.
// if (check_well_controls_) {
// computeFractionalFlow(props_, allcells_,
// state.pressure(), state.surfacevol(), state.saturation(),
// fractional_flows);
// wells_manager_.applyExplicitReinjectionControls(well_resflows_phase, well_resflows_phase);
// }
bool well_control_passed = !check_well_controls_;
int well_control_iteration = 0;
do {
// Run solver.
solver_timer.start();
std::vector<double> initial_pressure = state.pressure();
solver_.step(timer.currentStepLength(), state, well_state);
// Stop timer and report.
solver_timer.stop();
const double st = solver_timer.secsSinceStart();
std::cout << "Fully implicit solver took: " << st << " seconds." << std::endl;
stime += st;
sreport.pressure_time = st;
// Optionally, check if well controls are satisfied.
if (check_well_controls_) {
Opm::computePhaseFlowRatesPerWell(*wells_,
well_state.perfRates(),
fractional_flows,
well_resflows_phase);
std::cout << "Checking well conditions." << std::endl;
// For testing we set surface := reservoir
well_control_passed = wells_manager_.conditionsMet(well_state.bhp(), well_resflows_phase, well_resflows_phase);
++well_control_iteration;
if (!well_control_passed && well_control_iteration > max_well_control_iterations_) {
OPM_THROW(std::runtime_error, "Could not satisfy well conditions in " << max_well_control_iterations_ << " tries.");
}
if (!well_control_passed) {
std::cout << "Well controls not passed, solving again." << std::endl;
} else {
std::cout << "Well conditions met." << std::endl;
}
}
} while (!well_control_passed);
// Update pore volumes if rock is compressible.
if (rock_comp_props_ && rock_comp_props_->isActive()) {
initial_porevol = porevol;
computePorevolume(grid_, props_.porosity(), *rock_comp_props_, state.pressure(), porevol);
}
// The reports below are geared towards two phases only.
#if 0
// Report mass balances.
double injected[2] = { 0.0 };
double produced[2] = { 0.0 };
Opm::computeInjectedProduced(props_, state, transport_src, stepsize,
injected, produced);
Opm::computeSaturatedVol(porevol, state.surfacevol(), inplace_surfvol);
tot_injected[0] += injected[0];
tot_injected[1] += injected[1];
tot_produced[0] += produced[0];
tot_produced[1] += produced[1];
std::cout.precision(5);
const int width = 18;
std::cout << "\nMass balance report.\n";
std::cout << " Injected surface volumes: "
<< std::setw(width) << injected[0]
<< std::setw(width) << injected[1] << std::endl;
std::cout << " Produced surface volumes: "
<< std::setw(width) << produced[0]
<< std::setw(width) << produced[1] << std::endl;
std::cout << " Total inj surface volumes: "
<< std::setw(width) << tot_injected[0]
<< std::setw(width) << tot_injected[1] << std::endl;
std::cout << " Total prod surface volumes: "
<< std::setw(width) << tot_produced[0]
<< std::setw(width) << tot_produced[1] << std::endl;
const double balance[2] = { init_surfvol[0] - inplace_surfvol[0] - tot_produced[0] + tot_injected[0],
init_surfvol[1] - inplace_surfvol[1] - tot_produced[1] + tot_injected[1] };
std::cout << " Initial - inplace + inj - prod: "
<< std::setw(width) << balance[0]
<< std::setw(width) << balance[1]
<< std::endl;
std::cout << " Relative mass error: "
<< std::setw(width) << balance[0]/(init_surfvol[0] + tot_injected[0])
<< std::setw(width) << balance[1]/(init_surfvol[1] + tot_injected[1])
<< std::endl;
std::cout.precision(8);
// Make well reports.
watercut.push(timer.currentTime() + timer.currentStepLength(),
produced[0]/(produced[0] + produced[1]),
tot_produced[0]/tot_porevol_init);
if (wells_) {
wellreport.push(props_, *wells_,
state.pressure(), state.surfacevol(), state.saturation(),
timer.currentTime() + timer.currentStepLength(),
well_state.bhp(), well_state.perfRates());
}
#endif
sreport.total_time = step_timer.secsSinceStart();
if (output_) {
sreport.reportParam(tstep_os);
}
}
if (output_) {
if (output_vtk_) {
outputStateVtk(grid_, state, timer.currentStepNum(), output_dir_);
}
outputStateMatlab(grid_, state, timer.currentStepNum(), output_dir_);
outputWellStateMatlab(well_state,timer.currentStepNum(), output_dir_);
#if 0
outputWaterCut(watercut, output_dir_);
if (wells_) {
outputWellReport(wellreport, output_dir_);
}
#endif
tstep_os.close();
}
total_timer.stop();
SimulatorReport report;
report.pressure_time = stime;
report.transport_time = 0.0;
report.total_time = total_timer.secsSinceStart();
return report;
}
SimulatorReport SimulatorBase<Implementation>::run(SimulatorTimer& timer,
ReservoirState& state)
{
WellState prev_well_state;
// Create timers and file for writing timing info.
Opm::time::StopWatch solver_timer;
double stime = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
std::string tstep_filename = output_writer_.outputDirectory() + "/step_timing.txt";
std::ofstream tstep_os(tstep_filename.c_str());
// adaptive time stepping
std::unique_ptr< AdaptiveTimeStepping > adaptiveTimeStepping;
if( param_.getDefault("timestep.adaptive", true ) )
{
adaptiveTimeStepping.reset( new AdaptiveTimeStepping( param_, solver_.parallelInformation() ) );
}
// init output writer
output_writer_.writeInit( timer );
std::string restorefilename = param_.getDefault("restorefile", std::string("") );
if( ! restorefilename.empty() )
{
// -1 means that we'll take the last report step that was written
const int desiredRestoreStep = param_.getDefault("restorestep", int(-1) );
output_writer_.restore( timer, state, prev_well_state, restorefilename, desiredRestoreStep );
}
unsigned int totalNewtonIterations = 0;
unsigned int totalLinearIterations = 0;
// Main simulation loop.
while (!timer.done()) {
// Report timestep.
step_timer.start();
if ( terminal_output_ )
{
timer.report(std::cout);
}
// Create wells and well state.
WellsManager wells_manager(eclipse_state_,
timer.currentStepNum(),
Opm::UgGridHelpers::numCells(grid_),
Opm::UgGridHelpers::globalCell(grid_),
Opm::UgGridHelpers::cartDims(grid_),
Opm::UgGridHelpers::dimensions(grid_),
Opm::UgGridHelpers::cell2Faces(grid_),
Opm::UgGridHelpers::beginFaceCentroids(grid_),
props_.permeability(),
is_parallel_run_);
const Wells* wells = wells_manager.c_wells();
WellState well_state;
well_state.init(wells, state, prev_well_state);
// give the polymer and surfactant simulators the chance to do their stuff
asImpl().handleAdditionalWellInflow(timer, wells_manager, well_state, wells);
// write simulation state at the report stage
output_writer_.writeTimeStep( timer, state, well_state );
// Max oil saturation (for VPPARS), hysteresis update.
props_.updateSatOilMax(state.saturation());
props_.updateSatHyst(state.saturation(), allcells_);
// Compute reservoir volumes for RESV controls.
asImpl().computeRESV(timer.currentStepNum(), wells, state, well_state);
// Run a multiple steps of the solver depending on the time step control.
solver_timer.start();
auto solver = asImpl().createSolver(wells);
// If sub stepping is enabled allow the solver to sub cycle
// in case the report steps are too large for the solver to converge
//
// \Note: The report steps are met in any case
// \Note: The sub stepping will require a copy of the state variables
if( adaptiveTimeStepping ) {
adaptiveTimeStepping->step( timer, *solver, state, well_state, output_writer_ );
}
else {
// solve for complete report step
solver->step(timer.currentStepLength(), state, well_state);
}
// take time that was used to solve system for this reportStep
solver_timer.stop();
// accumulate the number of Newton and Linear Iterations
totalNewtonIterations += solver->newtonIterations();
totalLinearIterations += solver->linearIterations();
// Report timing.
const double st = solver_timer.secsSinceStart();
if ( terminal_output_ )
{
std::cout << "Fully implicit solver took: " << st << " seconds." << std::endl;
}
stime += st;
if ( output_writer_.output() ) {
SimulatorReport step_report;
step_report.pressure_time = st;
step_report.total_time = step_timer.secsSinceStart();
step_report.reportParam(tstep_os);
}
// Increment timer, remember well state.
++timer;
prev_well_state = well_state;
}
// Write final simulation state.
output_writer_.writeTimeStep( timer, state, prev_well_state );
// Stop timer and create timing report
total_timer.stop();
SimulatorReport report;
report.pressure_time = stime;
report.transport_time = 0.0;
report.total_time = total_timer.secsSinceStart();
report.total_newton_iterations = totalNewtonIterations;
report.total_linear_iterations = totalLinearIterations;
return report;
}
SimulatorReport SimulatorBase<Implementation>::run(SimulatorTimer& timer,
ReservoirState& state)
{
WellState prev_well_state;
if (output_writer_.isRestart()) {
// This is a restart, populate WellState and ReservoirState state objects from restart file
output_writer_.initFromRestartFile(props_.phaseUsage(), props_.permeability(), grid_, state, prev_well_state);
}
// Create timers and file for writing timing info.
Opm::time::StopWatch solver_timer;
double stime = 0.0;
Opm::time::StopWatch step_timer;
Opm::time::StopWatch total_timer;
total_timer.start();
std::string tstep_filename = output_writer_.outputDirectory() + "/step_timing.txt";
std::ofstream tstep_os(tstep_filename.c_str());
const auto& schedule = eclipse_state_->getSchedule();
const auto& events = schedule->getEvents();
// adaptive time stepping
std::unique_ptr< AdaptiveTimeStepping > adaptiveTimeStepping;
if( param_.getDefault("timestep.adaptive", true ) )
{
adaptiveTimeStepping.reset( new AdaptiveTimeStepping( param_, terminal_output_ ) );
}
// init output writer
output_writer_.writeInit( timer );
std::string restorefilename = param_.getDefault("restorefile", std::string("") );
if( ! restorefilename.empty() )
{
// -1 means that we'll take the last report step that was written
const int desiredRestoreStep = param_.getDefault("restorestep", int(-1) );
output_writer_.restore( timer, state, prev_well_state, restorefilename, desiredRestoreStep );
}
unsigned int totalNonlinearIterations = 0;
unsigned int totalLinearIterations = 0;
bool is_well_potentials_computed = param_.getDefault("compute_well_potentials", false );
std::vector<double> well_potentials;
// Main simulation loop.
while (!timer.done()) {
// Report timestep.
step_timer.start();
if ( terminal_output_ )
{
timer.report(std::cout);
}
// Create wells and well state.
WellsManager wells_manager(eclipse_state_,
timer.currentStepNum(),
Opm::UgGridHelpers::numCells(grid_),
Opm::UgGridHelpers::globalCell(grid_),
Opm::UgGridHelpers::cartDims(grid_),
Opm::UgGridHelpers::dimensions(grid_),
Opm::UgGridHelpers::cell2Faces(grid_),
Opm::UgGridHelpers::beginFaceCentroids(grid_),
props_.permeability(),
is_parallel_run_,
well_potentials);
const Wells* wells = wells_manager.c_wells();
WellState well_state;
well_state.init(wells, state, prev_well_state);
// give the polymer and surfactant simulators the chance to do their stuff
asImpl().handleAdditionalWellInflow(timer, wells_manager, well_state, wells);
// write simulation state at the report stage
output_writer_.writeTimeStep( timer, state, well_state );
// Max oil saturation (for VPPARS), hysteresis update.
props_.updateSatOilMax(state.saturation());
props_.updateSatHyst(state.saturation(), allcells_);
// Compute reservoir volumes for RESV controls.
asImpl().computeRESV(timer.currentStepNum(), wells, state, well_state);
// Run a multiple steps of the solver depending on the time step control.
solver_timer.start();
auto solver = asImpl().createSolver(wells);
// If sub stepping is enabled allow the solver to sub cycle
// in case the report steps are too large for the solver to converge
//
// \Note: The report steps are met in any case
// \Note: The sub stepping will require a copy of the state variables
if( adaptiveTimeStepping ) {
adaptiveTimeStepping->step( timer, *solver, state, well_state, output_writer_ );
}
else {
// solve for complete report step
solver->step(timer.currentStepLength(), state, well_state);
}
// update the derived geology (transmissibilities, pore volumes, etc) if the
// has geology changed for the next report step
const int nextTimeStepIdx = timer.currentStepNum() + 1;
if (nextTimeStepIdx < timer.numSteps()
&& events.hasEvent(ScheduleEvents::GEO_MODIFIER, nextTimeStepIdx)) {
// bring the contents of the keywords to the current state of the SCHEDULE
// section
//
// TODO (?): handle the parallel case (maybe this works out of the box)
DeckConstPtr miniDeck = schedule->getModifierDeck(nextTimeStepIdx);
eclipse_state_->applyModifierDeck(miniDeck);
geo_.update(grid_, props_, eclipse_state_, gravity_);
}
// take time that was used to solve system for this reportStep
solver_timer.stop();
// accumulate the number of nonlinear and linear Iterations
totalNonlinearIterations += solver->nonlinearIterations();
totalLinearIterations += solver->linearIterations();
// Report timing.
const double st = solver_timer.secsSinceStart();
// accumulate total time
stime += st;
if ( terminal_output_ )
{
std::cout << "Fully implicit solver took: " << st << " seconds. Total solver time taken: " << stime << " seconds." << std::endl;
}
if ( output_writer_.output() ) {
SimulatorReport step_report;
step_report.pressure_time = st;
step_report.total_time = step_timer.secsSinceStart();
step_report.reportParam(tstep_os);
}
// Increment timer, remember well state.
++timer;
prev_well_state = well_state;
// The well potentials are only computed if they are needed
// For now thay are only used to determine default guide rates for group controlled wells
if ( is_well_potentials_computed ) {
asImpl().computeWellPotentials(wells, well_state, well_potentials);
}
}
// Write final simulation state.
output_writer_.writeTimeStep( timer, state, prev_well_state );
// Stop timer and create timing report
total_timer.stop();
SimulatorReport report;
report.pressure_time = stime;
report.transport_time = 0.0;
report.total_time = total_timer.secsSinceStart();
report.total_newton_iterations = totalNonlinearIterations;
report.total_linear_iterations = totalLinearIterations;
return report;
}
// ----------------- Main program -----------------
int
main(int argc, char** argv)
try
{
using namespace Opm;
std::cout << "\n================ Test program for fully implicit three-phase black-oil flow ===============\n\n";
parameter::ParameterGroup param(argc, argv, false);
std::cout << "--------------- Reading parameters ---------------" << std::endl;
// If we have a "deck_filename", grid and props will be read from that.
bool use_deck = param.has("deck_filename");
if (!use_deck) {
OPM_THROW(std::runtime_error, "This program must be run with an input deck. "
"Specify the deck with deck_filename=deckname.data (for example).");
}
boost::scoped_ptr<EclipseGridParser> deck;
boost::scoped_ptr<GridManager> grid;
boost::scoped_ptr<BlackoilPropertiesInterface> props;
boost::scoped_ptr<BlackoilPropsAdInterface> new_props;
boost::scoped_ptr<RockCompressibility> rock_comp;
BlackoilState state;
// bool check_well_controls = false;
// int max_well_control_iterations = 0;
double gravity[3] = { 0.0 };
std::string deck_filename = param.get<std::string>("deck_filename");
deck.reset(new EclipseGridParser(deck_filename));
// Grid init
grid.reset(new GridManager(*deck));
// use the capitalized part of the deck's filename between the
// last '/' and the last '.' character as base name.
std::string baseName = deck_filename;
auto charPos = baseName.rfind('/');
if (charPos != std::string::npos)
baseName = baseName.substr(charPos + 1);
charPos = baseName.rfind('.');
if (charPos != std::string::npos)
baseName = baseName.substr(0, charPos);
baseName = boost::to_upper_copy(baseName);
Opm::EclipseWriter outputWriter(param, share_obj(*deck), share_obj(*grid->c_grid()));
// Rock and fluid init
props.reset(new BlackoilPropertiesFromDeck(*deck, *grid->c_grid(), param));
new_props.reset(new BlackoilPropsAdFromDeck(*deck, *grid->c_grid()));
// check_well_controls = param.getDefault("check_well_controls", false);
// max_well_control_iterations = param.getDefault("max_well_control_iterations", 10);
// Rock compressibility.
rock_comp.reset(new RockCompressibility(*deck));
// Gravity.
gravity[2] = deck->hasField("NOGRAV") ? 0.0 : unit::gravity;
// Init state variables (saturation and pressure).
if (param.has("init_saturation")) {
initStateBasic(*grid->c_grid(), *props, param, gravity[2], state);
initBlackoilSurfvol(*grid->c_grid(), *props, state);
enum { Oil = BlackoilPhases::Liquid, Gas = BlackoilPhases::Vapour };
const PhaseUsage pu = props->phaseUsage();
if (pu.phase_used[Oil] && pu.phase_used[Gas]) {
const int np = props->numPhases();
const int nc = grid->c_grid()->number_of_cells;
for (int c = 0; c < nc; ++c) {
state.gasoilratio()[c] = state.surfacevol()[c*np + pu.phase_pos[Gas]]
/ state.surfacevol()[c*np + pu.phase_pos[Oil]];
}
}
} else {
initBlackoilStateFromDeck(*grid->c_grid(), *props, *deck, gravity[2], state);
}
bool use_gravity = (gravity[0] != 0.0 || gravity[1] != 0.0 || gravity[2] != 0.0);
const double *grav = use_gravity ? &gravity[0] : 0;
// Linear solver.
LinearSolverFactory linsolver(param);
// Write parameters used for later reference.
bool output = param.getDefault("output", true);
std::ofstream epoch_os;
std::string output_dir;
if (output) {
output_dir =
param.getDefault("output_dir", std::string("output"));
boost::filesystem::path fpath(output_dir);
try {
create_directories(fpath);
}
catch (...) {
OPM_THROW(std::runtime_error, "Creating directories failed: " << fpath);
}
std::string filename = output_dir + "/epoch_timing.param";
epoch_os.open(filename.c_str(), std::fstream::trunc | std::fstream::out);
// open file to clean it. The file is appended to in SimulatorTwophase
filename = output_dir + "/step_timing.param";
std::fstream step_os(filename.c_str(), std::fstream::trunc | std::fstream::out);
step_os.close();
param.writeParam(output_dir + "/simulation.param");
}
std::cout << "\n\n================ Starting main simulation loop ===============\n"
<< " (number of epochs: "
<< (deck->numberOfEpochs()) << ")\n\n" << std::flush;
SimulatorReport rep;
// With a deck, we may have more epochs etc.
WellState well_state;
int step = 0;
SimulatorTimer simtimer;
// Use timer for last epoch to obtain total time.
deck->setCurrentEpoch(deck->numberOfEpochs() - 1);
simtimer.init(*deck);
const double total_time = simtimer.totalTime();
for (int epoch = 0; epoch < deck->numberOfEpochs(); ++epoch) {
// Set epoch index.
deck->setCurrentEpoch(epoch);
// Update the timer.
if (deck->hasField("TSTEP")) {
simtimer.init(*deck);
} else {
if (epoch != 0) {
OPM_THROW(std::runtime_error, "No TSTEP in deck for epoch " << epoch);
}
simtimer.init(param);
}
simtimer.setCurrentStepNum(step);
simtimer.setTotalTime(total_time);
// Report on start of epoch.
std::cout << "\n\n-------------- Starting epoch " << epoch << " --------------"
<< "\n (number of steps: "
<< simtimer.numSteps() - step << ")\n\n" << std::flush;
// Create new wells, well_state
WellsManager wells(*deck, *grid->c_grid(), props->permeability());
// @@@ HACK: we should really make a new well state and
// properly transfer old well state to it every epoch,
// since number of wells may change etc.
if (epoch == 0) {
well_state.init(wells.c_wells(), state);
}
// Create and run simulator.
SimulatorFullyImplicitBlackoil simulator(param,
*grid->c_grid(),
*new_props,
rock_comp->isActive() ? rock_comp.get() : 0,
wells,
linsolver,
grav,
outputWriter);
if (epoch == 0) {
warnIfUnusedParams(param);
}
SimulatorReport epoch_rep = simulator.run(simtimer, state, well_state);
if (output) {
epoch_rep.reportParam(epoch_os);
}
// Update total timing report and remember step number.
rep += epoch_rep;
step = simtimer.currentStepNum();
}
std::cout << "\n\n================ End of simulation ===============\n\n";
rep.report(std::cout);
if (output) {
std::string filename = output_dir + "/walltime.param";
std::fstream tot_os(filename.c_str(),std::fstream::trunc | std::fstream::out);
rep.reportParam(tot_os);
}
}
catch (const std::exception &e) {
std::cerr << "Program threw an exception: " << e.what() << "\n";
throw;
}
