/**
* Draw a single path element of the clip stack into the accumulation bitmap
*/
void GrSWMaskHelper::draw(const SkPath& path, const SkStrokeRec& stroke, SkRegion::Op op,
bool antiAlias, uint8_t alpha) {
SkPaint paint;
if (stroke.isHairlineStyle()) {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(SK_Scalar1);
} else {
if (stroke.isFillStyle()) {
paint.setStyle(SkPaint::kFill_Style);
} else {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeJoin(stroke.getJoin());
paint.setStrokeCap(stroke.getCap());
paint.setStrokeWidth(stroke.getWidth());
}
}
paint.setAntiAlias(antiAlias);
if (SkRegion::kReplace_Op == op && 0xFF == alpha) {
SkASSERT(0xFF == paint.getAlpha());
fDraw.drawPathCoverage(path, paint);
} else {
paint.setXfermodeMode(op_to_mode(op));
paint.setColor(SkColorSetARGB(alpha, alpha, alpha, alpha));
fDraw.drawPath(path, paint);
}
}
/**
* Draw a single path element of the clip stack into the accumulation bitmap
*/
void GrSWMaskHelper::draw(const SkPath& path, const SkStrokeRec& stroke, SkRegion::Op op,
bool antiAlias, uint8_t alpha) {
SkPaint paint;
if (stroke.isHairlineStyle()) {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(SK_Scalar1);
} else {
if (stroke.isFillStyle()) {
paint.setStyle(SkPaint::kFill_Style);
} else {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeJoin(stroke.getJoin());
paint.setStrokeCap(stroke.getCap());
paint.setStrokeWidth(stroke.getWidth());
}
}
SkXfermode* mode = SkXfermode::Create(op_to_mode(op));
paint.setXfermode(mode);
paint.setAntiAlias(antiAlias);
paint.setColor(SkColorSetARGB(alpha, alpha, alpha, alpha));
fDraw.drawPath(path, paint);
SkSafeUnref(mode);
}
uint64_t GrPath::ComputeStrokeKey(const SkStrokeRec& stroke) {
enum {
kStyleBits = 2,
kJoinBits = 2,
kCapBits = 2,
kWidthBits = 29,
kMiterBits = 29,
kJoinShift = kStyleBits,
kCapShift = kJoinShift + kJoinBits,
kWidthShift = kCapShift + kCapBits,
kMiterShift = kWidthShift + kWidthBits,
kBitCount = kMiterShift + kMiterBits
};
SK_COMPILE_ASSERT(SkStrokeRec::kStyleCount <= (1 << kStyleBits), style_shift_will_be_wrong);
SK_COMPILE_ASSERT(SkPaint::kJoinCount <= (1 << kJoinBits), cap_shift_will_be_wrong);
SK_COMPILE_ASSERT(SkPaint::kCapCount <= (1 << kCapBits), miter_shift_will_be_wrong);
SK_COMPILE_ASSERT(kBitCount == 64, wrong_stroke_key_size);
if (!stroke.needToApply()) {
return SkStrokeRec::kFill_Style;
}
uint64_t key = stroke.getStyle();
key |= stroke.getJoin() << kJoinShift;
key |= stroke.getCap() << kCapShift;
key |= get_top_n_float_bits<kWidthBits>(stroke.getWidth()) << kWidthShift;
key |= get_top_n_float_bits<kMiterBits>(stroke.getMiter()) << kMiterShift;
return key;
}
bool GrStrokePathRenderer::canDrawPath(const SkPath& path,
const SkStrokeRec& stroke,
const GrDrawTarget* target,
bool antiAlias) const {
// FIXME : put the proper condition once GrDrawTarget::isOpaque is implemented
const bool isOpaque = true; // target->isOpaque();
// FIXME : remove this requirement once we have AA circles and implement the
// circle joins/caps appropriately in the ::onDrawPath() function.
const bool requiresAACircle = (stroke.getCap() == SkPaint::kRound_Cap) ||
(stroke.getJoin() == SkPaint::kRound_Join);
// Indices being stored in uint16, we don't want to overflow the indices capacity
static const int maxVBSize = 1 << 16;
const int maxNbVerts = (path.countPoints() + 1) * 5;
// Check that the path contains no curved lines, only straight lines
static const uint32_t unsupportedMask = SkPath::kQuad_SegmentMask | SkPath::kCubic_SegmentMask;
// Must not be filled nor hairline nor semi-transparent
// Note : May require a check to path.isConvex() if AA is supported
return ((stroke.getStyle() == SkStrokeRec::kStroke_Style) && (maxNbVerts < maxVBSize) &&
!path.isInverseFillType() && isOpaque && !requiresAACircle && !antiAlias &&
((path.getSegmentMasks() & unsupportedMask) == 0));
}
/**
* Draw a single path element of the clip stack into the accumulation bitmap
*/
void GrSWMaskHelper::draw(const SkPath& path, const SkStrokeRec& stroke, SkRegion::Op op,
bool antiAlias, uint8_t alpha) {
SkPaint paint;
if (stroke.isHairlineStyle()) {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(SK_Scalar1);
} else {
if (stroke.isFillStyle()) {
paint.setStyle(SkPaint::kFill_Style);
} else {
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeJoin(stroke.getJoin());
paint.setStrokeCap(stroke.getCap());
paint.setStrokeWidth(stroke.getWidth());
}
}
paint.setAntiAlias(antiAlias);
SkTBlitterAllocator allocator;
SkBlitter* blitter = nullptr;
if (kBlitter_CompressionMode == fCompressionMode) {
SkASSERT(fCompressedBuffer.get());
blitter = SkTextureCompressor::CreateBlitterForFormat(
fPixels.width(), fPixels.height(), fCompressedBuffer.get(), &allocator,
fCompressedFormat);
}
if (SkRegion::kReplace_Op == op && 0xFF == alpha) {
SkASSERT(0xFF == paint.getAlpha());
fDraw.drawPathCoverage(path, paint, blitter);
} else {
paint.setXfermodeMode(op_to_mode(op));
paint.setColor(SkColorSetARGB(alpha, alpha, alpha, alpha));
fDraw.drawPath(path, paint, blitter);
}
}
// Currently asPoints is more restrictive then it needs to be. In the future
// we need to:
// allow kRound_Cap capping (could allow rotations in the matrix with this)
// allow paths to be returned
bool SkDashPathEffect::asPoints(PointData* results,
const SkPath& src,
const SkStrokeRec& rec,
const SkMatrix& matrix,
const SkRect* cullRect) const {
// width < 0 -> fill && width == 0 -> hairline so requiring width > 0 rules both out
if (fInitialDashLength < 0 || 0 >= rec.getWidth()) {
return false;
}
// TODO: this next test could be eased up. We could allow any number of
// intervals as long as all the ons match and all the offs match.
// Additionally, they do not necessarily need to be integers.
// We cannot allow arbitrary intervals since we want the returned points
// to be uniformly sized.
if (fCount != 2 ||
!SkScalarNearlyEqual(fIntervals[0], fIntervals[1]) ||
!SkScalarIsInt(fIntervals[0]) ||
!SkScalarIsInt(fIntervals[1])) {
return false;
}
SkPoint pts[2];
if (!src.isLine(pts)) {
return false;
}
// TODO: this test could be eased up to allow circles
if (SkPaint::kButt_Cap != rec.getCap()) {
return false;
}
// TODO: this test could be eased up for circles. Rotations could be allowed.
if (!matrix.rectStaysRect()) {
return false;
}
// See if the line can be limited to something plausible.
if (!cull_line(pts, rec, matrix, cullRect, fIntervalLength)) {
return false;
}
SkScalar length = SkPoint::Distance(pts[1], pts[0]);
SkVector tangent = pts[1] - pts[0];
if (tangent.isZero()) {
return false;
}
tangent.scale(SkScalarInvert(length));
// TODO: make this test for horizontal & vertical lines more robust
bool isXAxis = true;
if (SkScalarNearlyEqual(SK_Scalar1, tangent.fX) ||
SkScalarNearlyEqual(-SK_Scalar1, tangent.fX)) {
results->fSize.set(SkScalarHalf(fIntervals[0]), SkScalarHalf(rec.getWidth()));
} else if (SkScalarNearlyEqual(SK_Scalar1, tangent.fY) ||
SkScalarNearlyEqual(-SK_Scalar1, tangent.fY)) {
results->fSize.set(SkScalarHalf(rec.getWidth()), SkScalarHalf(fIntervals[0]));
isXAxis = false;
} else if (SkPaint::kRound_Cap != rec.getCap()) {
// Angled lines don't have axis-aligned boxes.
return false;
}
if (results) {
results->fFlags = 0;
SkScalar clampedInitialDashLength = SkMinScalar(length, fInitialDashLength);
if (SkPaint::kRound_Cap == rec.getCap()) {
results->fFlags |= PointData::kCircles_PointFlag;
}
results->fNumPoints = 0;
SkScalar len2 = length;
if (clampedInitialDashLength > 0 || 0 == fInitialDashIndex) {
SkASSERT(len2 >= clampedInitialDashLength);
if (0 == fInitialDashIndex) {
if (clampedInitialDashLength > 0) {
if (clampedInitialDashLength >= fIntervals[0]) {
++results->fNumPoints; // partial first dash
}
len2 -= clampedInitialDashLength;
}
len2 -= fIntervals[1]; // also skip first space
if (len2 < 0) {
len2 = 0;
}
} else {
len2 -= clampedInitialDashLength; // skip initial partial empty
}
}
int numMidPoints = SkScalarFloorToInt(len2 / fIntervalLength);
results->fNumPoints += numMidPoints;
len2 -= numMidPoints * fIntervalLength;
bool partialLast = false;
if (len2 > 0) {
if (len2 < fIntervals[0]) {
partialLast = true;
} else {
++numMidPoints;
++results->fNumPoints;
}
}
results->fPoints = new SkPoint[results->fNumPoints];
SkScalar distance = 0;
int curPt = 0;
if (clampedInitialDashLength > 0 || 0 == fInitialDashIndex) {
SkASSERT(clampedInitialDashLength <= length);
if (0 == fInitialDashIndex) {
if (clampedInitialDashLength > 0) {
// partial first block
SkASSERT(SkPaint::kRound_Cap != rec.getCap()); // can't handle partial circles
SkScalar x = pts[0].fX + SkScalarMul(tangent.fX, SkScalarHalf(clampedInitialDashLength));
SkScalar y = pts[0].fY + SkScalarMul(tangent.fY, SkScalarHalf(clampedInitialDashLength));
SkScalar halfWidth, halfHeight;
if (isXAxis) {
halfWidth = SkScalarHalf(clampedInitialDashLength);
halfHeight = SkScalarHalf(rec.getWidth());
} else {
halfWidth = SkScalarHalf(rec.getWidth());
halfHeight = SkScalarHalf(clampedInitialDashLength);
}
if (clampedInitialDashLength < fIntervals[0]) {
// This one will not be like the others
results->fFirst.addRect(x - halfWidth, y - halfHeight,
x + halfWidth, y + halfHeight);
} else {
SkASSERT(curPt < results->fNumPoints);
results->fPoints[curPt].set(x, y);
++curPt;
}
distance += clampedInitialDashLength;
}
distance += fIntervals[1]; // skip over the next blank block too
} else {
distance += clampedInitialDashLength;
}
}
if (0 != numMidPoints) {
distance += SkScalarHalf(fIntervals[0]);
for (int i = 0; i < numMidPoints; ++i) {
SkScalar x = pts[0].fX + SkScalarMul(tangent.fX, distance);
SkScalar y = pts[0].fY + SkScalarMul(tangent.fY, distance);
SkASSERT(curPt < results->fNumPoints);
results->fPoints[curPt].set(x, y);
++curPt;
distance += fIntervalLength;
}
distance -= SkScalarHalf(fIntervals[0]);
}
if (partialLast) {
// partial final block
SkASSERT(SkPaint::kRound_Cap != rec.getCap()); // can't handle partial circles
SkScalar temp = length - distance;
SkASSERT(temp < fIntervals[0]);
SkScalar x = pts[0].fX + SkScalarMul(tangent.fX, distance + SkScalarHalf(temp));
SkScalar y = pts[0].fY + SkScalarMul(tangent.fY, distance + SkScalarHalf(temp));
SkScalar halfWidth, halfHeight;
if (isXAxis) {
halfWidth = SkScalarHalf(temp);
halfHeight = SkScalarHalf(rec.getWidth());
} else {
halfWidth = SkScalarHalf(rec.getWidth());
halfHeight = SkScalarHalf(temp);
}
results->fLast.addRect(x - halfWidth, y - halfHeight,
x + halfWidth, y + halfHeight);
}
SkASSERT(curPt == results->fNumPoints);
}
return true;
}
bool GrStrokePathRenderer::onDrawPath(const SkPath& origPath,
const SkStrokeRec& stroke,
GrDrawTarget* target,
bool antiAlias) {
if (origPath.isEmpty()) {
return true;
}
SkScalar width = stroke.getWidth();
if (width <= 0) {
return false;
}
// Get the join type
SkPaint::Join join = stroke.getJoin();
SkScalar miterLimit = stroke.getMiter();
SkScalar sqMiterLimit = SkScalarMul(miterLimit, miterLimit);
if ((join == SkPaint::kMiter_Join) && (miterLimit <= SK_Scalar1)) {
// If the miter limit is small, treat it as a bevel join
join = SkPaint::kBevel_Join;
}
const bool isMiter = (join == SkPaint::kMiter_Join);
const bool isBevel = (join == SkPaint::kBevel_Join);
SkScalar invMiterLimit = isMiter ? SK_Scalar1 / miterLimit : 0;
SkScalar invMiterLimitSq = SkScalarMul(invMiterLimit, invMiterLimit);
// Allocate vertices
const int nbQuads = origPath.countPoints() + 1; // Could be "-1" if path is not closed
const int extraVerts = isMiter || isBevel ? 1 : 0;
const int maxVertexCount = nbQuads * (4 + extraVerts);
const int maxIndexCount = nbQuads * (6 + extraVerts * 3); // Each extra vert adds a triangle
target->drawState()->setDefaultVertexAttribs();
GrDrawTarget::AutoReleaseGeometry arg(target, maxVertexCount, maxIndexCount);
if (!arg.succeeded()) {
return false;
}
SkPoint* verts = reinterpret_cast<SkPoint*>(arg.vertices());
uint16_t* idxs = reinterpret_cast<uint16_t*>(arg.indices());
int vCount = 0, iCount = 0;
// Transform the path into a list of triangles
SkPath::Iter iter(origPath, false);
SkPoint pts[4];
const SkScalar radius = SkScalarMul(width, 0.5f);
SkPoint *firstPt = verts, *lastPt = NULL;
SkVector firstDir, dir;
firstDir.set(0, 0);
dir.set(0, 0);
bool isOpen = true;
for(SkPath::Verb v = iter.next(pts); v != SkPath::kDone_Verb; v = iter.next(pts)) {
switch(v) {
case SkPath::kMove_Verb:
// This will already be handled as pts[0] of the 1st line
break;
case SkPath::kClose_Verb:
isOpen = (lastPt == NULL);
break;
case SkPath::kLine_Verb:
{
SkVector v0 = dir;
dir = pts[1] - pts[0];
if (dir.setLength(radius)) {
SkVector dirT;
dirT.set(dir.fY, -dir.fX); // Get perpendicular direction
SkPoint l1a = pts[0]+dirT, l1b = pts[1]+dirT,
l2a = pts[0]-dirT, l2b = pts[1]-dirT;
SkPoint miterPt[2];
bool useMiterPoint = false;
int idx0(-1), idx1(-1);
if (NULL == lastPt) {
firstDir = dir;
} else {
SkVector v1 = dir;
if (v0.normalize() && v1.normalize()) {
SkScalar dotProd = v0.dot(v1);
// No need for bevel or miter join if the angle
// is either 0 or 180 degrees
if (!SkScalarNearlyZero(dotProd + SK_Scalar1) &&
!SkScalarNearlyZero(dotProd - SK_Scalar1)) {
bool ccw = !is_clockwise(v0, v1);
int offset = ccw ? 1 : 0;
idx0 = vCount-2+offset;
idx1 = vCount+offset;
const SkPoint* pt0 = &(lastPt[offset]);
const SkPoint* pt1 = ccw ? &l2a : &l1a;
switch(join) {
case SkPaint::kMiter_Join:
{
// *Note : Logic is from MiterJoiner
// FIXME : Special case if we have a right angle ?
// if (SkScalarNearlyZero(dotProd)) {...}
SkScalar sinHalfAngleSq =
SkScalarHalf(SK_Scalar1 + dotProd);
if (sinHalfAngleSq >= invMiterLimitSq) {
// Find the miter point (or points if it is further
// than the miter limit)
const SkPoint pt2 = *pt0+v0, pt3 = *pt1+v1;
if (intersection(*pt0, pt2, *pt1, pt3, miterPt[0]) !=
kNone_IntersectionType) {
SkPoint miterPt0 = miterPt[0] - *pt0;
SkPoint miterPt1 = miterPt[0] - *pt1;
SkScalar sqDist0 = miterPt0.dot(miterPt0);
SkScalar sqDist1 = miterPt1.dot(miterPt1);
const SkScalar rSq =
SkScalarDiv(SkScalarMul(radius, radius),
sinHalfAngleSq);
const SkScalar sqRLimit =
SkScalarMul(sqMiterLimit, rSq);
if (sqDist0 > sqRLimit || sqDist1 > sqRLimit) {
if (sqDist1 > sqRLimit) {
v1.setLength(SkScalarSqrt(sqRLimit));
miterPt[1] = *pt1+v1;
} else {
miterPt[1] = miterPt[0];
}
if (sqDist0 > sqRLimit) {
v0.setLength(SkScalarSqrt(sqRLimit));
miterPt[0] = *pt0+v0;
}
} else {
miterPt[1] = miterPt[0];
}
useMiterPoint = true;
}
}
if (useMiterPoint && (miterPt[1] == miterPt[0])) {
break;
}
}
default:
case SkPaint::kBevel_Join:
{
// Note : This currently causes some overdraw where both
// lines initially intersect. We'd need to add
// another line intersection check here if the
// overdraw becomes an issue instead of using the
// current point directly.
// Add center point
*verts++ = pts[0]; // Use current point directly
// This idx is passed the current point so increment it
++idx1;
// Add center triangle
*idxs++ = idx0;
*idxs++ = vCount;
*idxs++ = idx1;
vCount++;
iCount += 3;
}
break;
}
}
}
}
*verts++ = l1a;
*verts++ = l2a;
lastPt = verts;
*verts++ = l1b;
*verts++ = l2b;
if (useMiterPoint && (idx0 >= 0) && (idx1 >= 0)) {
firstPt[idx0] = miterPt[0];
firstPt[idx1] = miterPt[1];
}
// 1st triangle
*idxs++ = vCount+0;
*idxs++ = vCount+2;
*idxs++ = vCount+1;
// 2nd triangle
*idxs++ = vCount+1;
*idxs++ = vCount+2;
*idxs++ = vCount+3;
vCount += 4;
iCount += 6;
}
}
break;
case SkPath::kQuad_Verb:
case SkPath::kCubic_Verb:
SkDEBUGFAIL("Curves not supported!");
default:
// Unhandled cases
SkASSERT(false);
}
}
if (isOpen) {
// Add caps
switch (stroke.getCap()) {
case SkPaint::kSquare_Cap:
firstPt[0] -= firstDir;
firstPt[1] -= firstDir;
lastPt [0] += dir;
lastPt [1] += dir;
break;
case SkPaint::kRound_Cap:
SkDEBUGFAIL("Round caps not supported!");
default: // No cap
break;
}
}
SkASSERT(vCount <= maxVertexCount);
SkASSERT(iCount <= maxIndexCount);
if (vCount > 0) {
target->drawIndexed(kTriangles_GrPrimitiveType,
0, // start vertex
0, // start index
vCount,
iCount);
}
return true;
}
