bool CallAnalyzer::visitSwitchInst(SwitchInst &SI) {
// We model unconditional switches as free, see the comments on handling
// branches.
if (isa<ConstantInt>(SI.getCondition()))
return true;
if (Value *V = SimplifiedValues.lookup(SI.getCondition()))
if (isa<ConstantInt>(V))
return true;
// Otherwise, we need to accumulate a cost proportional to the number of
// distinct successor blocks. This fan-out in the CFG cannot be represented
// for free even if we can represent the core switch as a jumptable that
// takes a single instruction.
//
// NB: We convert large switches which are just used to initialize large phi
// nodes to lookup tables instead in simplify-cfg, so this shouldn't prevent
// inlining those. It will prevent inlining in cases where the optimization
// does not (yet) fire.
SmallPtrSet<BasicBlock *, 8> SuccessorBlocks;
SuccessorBlocks.insert(SI.getDefaultDest());
for (auto I = SI.case_begin(), E = SI.case_end(); I != E; ++I)
SuccessorBlocks.insert(I.getCaseSuccessor());
// Add cost corresponding to the number of distinct destinations. The first
// we model as free because of fallthrough.
Cost += (SuccessorBlocks.size() - 1) * InlineConstants::InstrCost;
return false;
}
void LLVM_General_GetSwitchCases(
LLVMValueRef v,
LLVMValueRef *values,
LLVMBasicBlockRef *dests
) {
SwitchInst *s = unwrap<SwitchInst>(v);
for(SwitchInst::CaseIt i = s->case_begin(); i != s->case_end(); ++i, ++values, ++dests) {
*values = wrap(i.getCaseValue());
*dests = wrap(i.getCaseSuccessor());
}
}
/// expandCaseRange - Expand case range into explicit case values within the
/// range
bool WriteBitcodePass::expandCaseRange(Function &F) {
bool Changed = false;
for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
SwitchInst *SI = dyn_cast<SwitchInst>(BB->getTerminator());
if (SI == NULL) {
continue;
}
for (SwitchInst::CaseIt i = SI->case_begin(), e = SI->case_end();
i != e; ++i) {
IntegersSubset& CaseRanges = i.getCaseValueEx();
// All case ranges are already in single case values
if (CaseRanges.isSingleNumbersOnly()) {
continue;
}
// Create a new case
Type *IntTy = SI->getCondition()->getType();
IntegersSubsetToBB CaseBuilder;
Changed = true;
for (unsigned ri = 0, rn = CaseRanges.getNumItems(); ri != rn; ++ri) {
IntegersSubset::Range r = CaseRanges.getItem(ri);
bool IsSingleNumber = CaseRanges.isSingleNumber(ri);
if (IsSingleNumber) {
CaseBuilder.add(r);
} else {
const APInt &Low = r.getLow();
const APInt &High = r.getHigh();
for (APInt V = Low; V != High; V++) {
assert(r.isInRange(V) && "Unexpected out-of-range case value!");
CaseBuilder.add(IntItem::fromType(IntTy, V));
}
}
IntegersSubset Case = CaseBuilder.getCase();
i.setValueEx(Case);
}
}
}
return Changed;
}
Value* LoopTripCount::insertTripCount(Loop* L, Instruction* InsertPos)
{
// inspired from Loop::getCanonicalInductionVariable
BasicBlock *H = L->getHeader();
BasicBlock* LoopPred = L->getLoopPredecessor();
BasicBlock* startBB = NULL;//which basicblock stores start value
int OneStep = 0;// the extra add or plus step for calc
Assert(LoopPred, "Require Loop has a Pred");
DEBUG(errs()<<"loop depth:"<<L->getLoopDepth()<<"\n");
/** whats difference on use of predecessor and preheader??*/
//RET_ON_FAIL(self->getLoopLatch()&&self->getLoopPreheader());
//assert(self->getLoopLatch() && self->getLoopPreheader() && "need loop simplify form" );
ret_null_fail(L->getLoopLatch(), "need loop simplify form");
BasicBlock* TE = NULL;//True Exit
SmallVector<BasicBlock*,4> Exits;
L->getExitingBlocks(Exits);
if(Exits.size()==1) TE = Exits.front();
else{
if(std::find(Exits.begin(),Exits.end(),L->getLoopLatch())!=Exits.end()) TE = L->getLoopLatch();
else{
SmallVector<llvm::Loop::Edge,4> ExitEdges;
L->getExitEdges(ExitEdges);
//stl 用法,先把所有满足条件的元素(出口的结束符是不可到达)移动到数组的末尾,再统一删除
ExitEdges.erase(std::remove_if(ExitEdges.begin(), ExitEdges.end(),
[](llvm::Loop::Edge& I){
return isa<UnreachableInst>(I.second->getTerminator());
}), ExitEdges.end());
if(ExitEdges.size()==1) TE = const_cast<BasicBlock*>(ExitEdges.front().first);
}
}
//process true exit
ret_null_fail(TE, "need have a true exit");
Instruction* IndOrNext = NULL;
Value* END = NULL;
//终止块的终止指令：分情况讨论branchinst,switchinst;
//跳转指令br bool a1,a2;condition<-->bool
if(isa<BranchInst>(TE->getTerminator())){
const BranchInst* EBR = cast<BranchInst>(TE->getTerminator());
Assert(EBR->isConditional(), "end branch is not conditional");
ICmpInst* EC = dyn_cast<ICmpInst>(EBR->getCondition());
if(EC->getPredicate() == EC->ICMP_SGT){
Assert(!L->contains(EBR->getSuccessor(0)), *EBR<<":abnormal exit with great than");//终止块的终止指令---->跳出执行循环外的指令
OneStep += 1;
} else if(EC->getPredicate() == EC->ICMP_EQ)
Assert(!L->contains(EBR->getSuccessor(0)), *EBR<<":abnormal exit with great than");
else if(EC->getPredicate() == EC->ICMP_SLT) {
ret_null_fail(!L->contains(EBR->getSuccessor(1)), *EBR<<":abnormal exit with less than");
} else {
ret_null_fail(0, *EC<<" unknow combination of end condition");
}
IndOrNext = dyn_cast<Instruction>(castoff(EC->getOperand(0)));//去掉类型转化
END = EC->getOperand(1);
DEBUG(errs()<<"end value:"<<*EC<<"\n");
}else if(isa<SwitchInst>(TE->getTerminator())){
SwitchInst* ESW = const_cast<SwitchInst*>(cast<SwitchInst>(TE->getTerminator()));
IndOrNext = dyn_cast<Instruction>(castoff(ESW->getCondition()));
for(auto I = ESW->case_begin(),E = ESW->case_end();I!=E;++I){
if(!L->contains(I.getCaseSuccessor())){
ret_null_fail(!END,"");
assert(!END && "shouldn't have two ends");
END = I.getCaseValue();
}
}
DEBUG(errs()<<"end value:"<<*ESW<<"\n");
}else{
assert(0 && "unknow terminator type");
}
ret_null_fail(L->isLoopInvariant(END), "end value should be loop invariant");//至此得END值
Value* start = NULL;
Value* ind = NULL;
Instruction* next = NULL;
bool addfirst = false;//add before icmp ed
DISABLE(errs()<<*IndOrNext<<"\n");
if(isa<LoadInst>(IndOrNext)){
//memory depend analysis
Value* PSi = IndOrNext->getOperand(0);//point type Step.i
int SICount[2] = {0};//store in predecessor count,store in loop body count
for( auto I = PSi->use_begin(),E = PSi->use_end();I!=E;++I){
DISABLE(errs()<<**I<<"\n");
StoreInst* SI = dyn_cast<StoreInst>(*I);
if(!SI || SI->getOperand(1) != PSi) continue;
if(!start&&L->isLoopInvariant(SI->getOperand(0))) {
if(SI->getParent() != LoopPred)
if(std::find(pred_begin(LoopPred),pred_end(LoopPred),SI->getParent()) == pred_end(LoopPred)) continue;
start = SI->getOperand(0);
startBB = SI->getParent();
++SICount[0];
}
Instruction* SI0 = dyn_cast<Instruction>(SI->getOperand(0));
if(L->contains(SI) && SI0 && SI0->getOpcode() == Instruction::Add){
next = SI0;
++SICount[1];
}
}
Assert(SICount[0]==1 && SICount[1]==1, "");
ind = IndOrNext;
}else{
if(isa<PHINode>(IndOrNext)){
PHINode* PHI = cast<PHINode>(IndOrNext);
ind = IndOrNext;
if(castoff(PHI->getIncomingValue(0)) == castoff(PHI->getIncomingValue(1)) && PHI->getParent() != H)
ind = castoff(PHI->getIncomingValue(0));
addfirst = false;
}else if(IndOrNext->getOpcode() == Instruction::Add){
next = IndOrNext;
addfirst = true;
}else{
Assert(0 ,"unknow how to analysis");
}
for(auto I = H->begin();isa<PHINode>(I);++I){
PHINode* P = cast<PHINode>(I);
if(ind && P == ind){
//start = P->getIncomingValueForBlock(L->getLoopPredecessor());
start = tryFindStart(P, L, startBB);
next = dyn_cast<Instruction>(P->getIncomingValueForBlock(L->getLoopLatch()));
}else if(next && P->getIncomingValueForBlock(L->getLoopLatch()) == next){
//start = P->getIncomingValueForBlock(L->getLoopPredecessor());
start = tryFindStart(P, L, startBB);
ind = P;
}
}
}
Assert(start ,"couldn't find a start value");
//process complex loops later
//DEBUG(if(L->getLoopDepth()>1 || !L->getSubLoops().empty()) return NULL);
DEBUG(errs()<<"start value:"<<*start<<"\n");
DEBUG(errs()<<"ind value:"<<*ind<<"\n");
DEBUG(errs()<<"next value:"<<*next<<"\n");
//process non add later
unsigned next_phi_idx = 0;
ConstantInt* Step = NULL,*PrevStep = NULL;/*only used if next is phi node*/
ret_null_fail(next, "");
PHINode* next_phi = dyn_cast<PHINode>(next);
do{
if(next_phi) {
next = dyn_cast<Instruction>(next_phi->getIncomingValue(next_phi_idx));
ret_null_fail(next, "");
DEBUG(errs()<<"next phi "<<next_phi_idx<<":"<<*next<<"\n");
if(Step&&PrevStep){
Assert(Step->getSExtValue() == PrevStep->getSExtValue(),"");
}
PrevStep = Step;
}
Assert(next->getOpcode() == Instruction::Add , "why induction increment is not Add");
Assert(next->getOperand(0) == ind ,"why induction increment is not add it self");
Step = dyn_cast<ConstantInt>(next->getOperand(1));
Assert(Step,"");
}while(next_phi && ++next_phi_idx<next_phi->getNumIncomingValues());
//RET_ON_FAIL(Step->equalsInt(1));
//assert(VERBOSE(Step->equalsInt(1),Step) && "why induction increment number is not 1");
Value* RES = NULL;
//if there are no predecessor, we can insert code into start value basicblock
IRBuilder<> Builder(InsertPos);
Assert(start->getType()->isIntegerTy() && END->getType()->isIntegerTy() , " why increment is not integer type");
if(start->getType() != END->getType()){
start = Builder.CreateCast(CastInst::getCastOpcode(start, false,
END->getType(), false),start,END->getType());
}
if(Step->getType() != END->getType()){
//Because Step is a Constant, so it casted is constant
Step = dyn_cast<ConstantInt>(Builder.CreateCast(CastInst::getCastOpcode(Step, false,
END->getType(), false),Step,END->getType()));
AssertRuntime(Step);
}
if(Step->isMinusOne())
RES = Builder.CreateSub(start,END);
else//Step Couldn't be zero
RES = Builder.CreateSub(END, start);
if(addfirst) OneStep -= 1;
if(Step->isMinusOne()) OneStep*=-1;
assert(OneStep<=1 && OneStep>=-1);
RES = (OneStep==1)?Builder.CreateAdd(RES,Step):(OneStep==-1)?Builder.CreateSub(RES, Step):RES;
if(!Step->isMinusOne()&&!Step->isOne())
RES = Builder.CreateSDiv(RES, Step);
RES->setName(H->getName()+".tc");
return RES;
}
