void
PeerServer::sync_new_member(set<Member>::iterator nit)
{
UpdateRequest request;
for (set<Member>::iterator it = members.begin();
it != members.end(); it++) {
if (it != nit) {
request.members.push_back(*it);
}
}
if (nit == members.end()) {
cerr << __func__ << ": Internal error" << endl;
exit(EXIT_FAILURE);
}
RemoteConnection connection(*nit);
if (!connection.open) {
cerr << __func__ << ": connection failed" << endl;
return;
}
request.serialize(connection);
connection.close();
}
UpdateResult update(OperationContext* txn,
Database* db,
const UpdateRequest& request,
OpDebug* opDebug) {
invariant(db);
// Explain should never use this helper.
invariant(!request.isExplain());
const NamespaceString& nsString = request.getNamespaceString();
Collection* collection = db->getCollection(nsString.ns());
// The update stage does not create its own collection. As such, if the update is
// an upsert, create the collection that the update stage inserts into beforehand.
if (!collection && request.isUpsert()) {
// We have to have an exclusive lock on the db to be allowed to create the collection.
// Callers should either get an X or create the collection.
const Locker* locker = txn->lockState();
invariant(locker->isW() ||
locker->isLockHeldForMode(ResourceId(RESOURCE_DATABASE, nsString.db()),
MODE_X));
ScopedTransaction transaction(txn, MODE_IX);
Lock::DBLock lk(txn->lockState(), nsString.db(), MODE_X);
bool userInitiatedWritesAndNotPrimary = txn->writesAreReplicated() &&
!repl::getGlobalReplicationCoordinator()->canAcceptWritesForDatabase(nsString.db());
if (userInitiatedWritesAndNotPrimary) {
uassertStatusOK(Status(ErrorCodes::NotMaster, str::stream()
<< "Not primary while creating collection " << nsString.ns()
<< " during upsert"));
}
WriteUnitOfWork wuow(txn);
collection = db->createCollection(txn, nsString.ns(), CollectionOptions());
invariant(collection);
wuow.commit();
}
// Parse the update, get an executor for it, run the executor, get stats out.
ParsedUpdate parsedUpdate(txn, &request);
uassertStatusOK(parsedUpdate.parseRequest());
PlanExecutor* rawExec;
uassertStatusOK(getExecutorUpdate(txn, collection, &parsedUpdate, opDebug, &rawExec));
boost::scoped_ptr<PlanExecutor> exec(rawExec);
uassertStatusOK(exec->executePlan());
return UpdateStage::makeUpdateResult(exec.get(), opDebug);
}
UpdateResult update(OperationContext* txn,
Database* db,
const UpdateRequest& request,
OpDebug* opDebug) {
invariant(db);
// Explain should never use this helper.
invariant(!request.isExplain());
const NamespaceString& nsString = request.getNamespaceString();
Collection* collection = db->getCollection(txn, nsString.ns());
// The update stage does not create its own collection. As such, if the update is
// an upsert, create the collection that the update stage inserts into beforehand.
if (!collection && request.isUpsert()) {
// We have to have an exclusive lock on the db to be allowed to create the collection.
// Callers should either get an X or create the collection.
const Locker* locker = txn->lockState();
invariant(locker->isW() ||
locker->isLockHeldForMode(ResourceId(RESOURCE_DATABASE, nsString.db()),
MODE_X));
ScopedTransaction transaction(txn, MODE_IX);
Lock::DBLock lk(txn->lockState(), nsString.db(), MODE_X);
WriteUnitOfWork wuow(txn);
collection = db->createCollection(txn, nsString.ns());
invariant(collection);
if (!request.isFromReplication()) {
repl::logOp(txn,
"c",
(db->name() + ".$cmd").c_str(),
BSON("create" << (nsString.coll())));
}
wuow.commit();
}
// Parse the update, get an executor for it, run the executor, get stats out.
ParsedUpdate parsedUpdate(txn, &request);
uassertStatusOK(parsedUpdate.parseRequest());
PlanExecutor* rawExec;
uassertStatusOK(getExecutorUpdate(txn, collection, &parsedUpdate, opDebug, &rawExec));
boost::scoped_ptr<PlanExecutor> exec(rawExec);
uassertStatusOK(exec->executePlan());
return UpdateStage::makeUpdateResult(exec.get(), opDebug);
}
UpdateResult update(const UpdateRequest& request, OpDebug* opDebug) {
// Should the modifiers validate their embedded docs via okForStorage
// Only user updates should be checked. Any system or replication stuff should pass through.
// Config db docs shouldn't get checked for valid field names since the shard key can have
// a dot (".") in it.
bool shouldValidate = !(request.isFromReplication() ||
request.getNamespaceString().isConfigDB());
// TODO: Consider some sort of unification between the UpdateDriver, ModifierInterface
// and UpdateRequest structures.
UpdateDriver::Options opts;
opts.multi = request.isMulti();
opts.upsert = request.isUpsert();
opts.logOp = request.shouldUpdateOpLog();
opts.modOptions = ModifierInterface::Options( request.isFromReplication(), shouldValidate );
UpdateDriver driver( opts );
Status status = driver.parse( request.getUpdates() );
if ( !status.isOK() ) {
uasserted( 16840, status.reason() );
}
return update(request, opDebug, &driver);
}
void
PeerServer::notify_old_members_del(const Member& member)
{
for (set<Member>::iterator it = members.begin();
it != members.end(); it++) {
UpdateRequest request;
RemoteConnection connection(*it);
if (!connection.open) {
cerr << __func__ << ": connection failed" << endl;
continue;
}
request.add = false;
request.members.push_back(member);
request.serialize(connection);
connection.close();
}
}
UpdateResult update(const UpdateRequest& request, OpDebug* opDebug, UpdateDriver* driver) {
LOG(3) << "processing update : " << request;
const NamespaceString& nsString = request.getNamespaceString();
validateUpdate( nsString.ns().c_str(), request.getUpdates(), request.getQuery() );
NamespaceDetails* nsDetails = nsdetails( nsString.ns() );
NamespaceDetailsTransient* nsDetailsTransient =
&NamespaceDetailsTransient::get( nsString.ns().c_str() );
// TODO: This seems a bit circuitious.
opDebug->updateobj = request.getUpdates();
driver->refreshIndexKeys( nsDetailsTransient->indexKeys() );
shared_ptr<Cursor> cursor = getOptimizedCursor(
nsString.ns(), request.getQuery(), BSONObj(), request.getQueryPlanSelectionPolicy() );
// If the update was marked with '$isolated' (a.k.a '$atomic'), we are not allowed to
// yield while evaluating the update loop below.
//
// TODO: Old code checks this repeatedly within the update loop. Is that necessary? It seems
// that once atomic should be always atomic.
const bool isolated =
cursor->ok() &&
cursor->matcher() &&
cursor->matcher()->docMatcher().atomic();
// The 'cursor' the optimizer gave us may contain query plans that generate duplicate
// diskloc's. We set up here the mechanims that will prevent us from processing those
// twice if we see them. We also set up a 'ClientCursor' so that we can support
// yielding.
//
// TODO: Is it valid to call this on a non-ok cursor?
const bool dedupHere = cursor->autoDedup();
//
// We'll start assuming we have one or more documents for this update. (Othwerwise,
// we'll fallback to upserting.)
//
// We record that this will not be an upsert, in case a mod doesn't want to be applied
// when in strict update mode.
driver->setContext( ModifierInterface::ExecInfo::UPDATE_CONTEXT );
// Let's fetch each of them and pipe them through the update expression, making sure to
// keep track of the necessary stats. Recall that we'll be pulling documents out of
// cursors and some of them do not deduplicate the entries they generate. We have
// deduping logic in here, too -- for now.
unordered_set<DiskLoc, DiskLoc::Hasher> seenLocs;
int numMatched = 0;
// Reset these counters on each call. We might re-enter this function to retry this
// update if we throw a page fault exception below, and we rely on these counters
// reflecting only the actions taken locally. In particlar, we must have the no-op
// counter reset so that we can meaningfully comapre it with numMatched above.
opDebug->nscanned = 0;
opDebug->nupdateNoops = 0;
Client& client = cc();
mutablebson::Document doc;
mutablebson::DamageVector damages;
// If we are going to be yielding, we will need a ClientCursor scoped to this loop. We
// only loop as long as the underlying cursor is OK.
for ( auto_ptr<ClientCursor> clientCursor; cursor->ok(); ) {
// If we haven't constructed a ClientCursor, and if the client allows us to throw
// page faults, and if we are referring to a location that is likely not in
// physical memory, then throw a PageFaultException. The entire operation will be
// restarted.
if ( clientCursor.get() == NULL &&
client.allowedToThrowPageFaultException() &&
!cursor->currLoc().isNull() &&
!cursor->currLoc().rec()->likelyInPhysicalMemory() ) {
// We should never throw a PFE if we have already updated items. The numMatched
// variable includes no-ops, which do not prevent us from raising a PFE, so if
// numMatched is non-zero, we are still OK to throw as long all matched items
// resulted in a no-op.
dassert((numMatched == 0) || (numMatched == opDebug->nupdateNoops));
throw PageFaultException( cursor->currLoc().rec() );
}
if ( !isolated && opDebug->nscanned != 0 ) {
// We are permitted to yield. To do so we need a ClientCursor, so create one
// now if we have not yet done so.
if ( !clientCursor.get() )
clientCursor.reset(
new ClientCursor( QueryOption_NoCursorTimeout, cursor, nsString.ns() ) );
// Ask the client cursor to yield. We get two bits of state back: whether or not
// we yielded, and whether or not we correctly recovered from yielding.
bool yielded = false;
const bool recovered = clientCursor->yieldSometimes(
ClientCursor::WillNeed, &yielded );
if ( !recovered ) {
// If we failed to recover from the yield, then the ClientCursor is already
// gone. Release it so we don't destroy it a second time.
clientCursor.release();
break;
}
if ( !cursor->ok() ) {
// If the cursor died while we were yielded, just get out of the update loop.
break;
}
if ( yielded ) {
// We yielded and recovered OK, and our cursor is still good. Details about
// our namespace may have changed while we were yielded, so we re-acquire
// them here. If we can't do so, escape the update loop. Otherwise, refresh
// the driver so that it knows about what is currently indexed.
nsDetails = nsdetails( nsString.ns() );
if ( !nsDetails )
break;
nsDetailsTransient = &NamespaceDetailsTransient::get( nsString.ns().c_str() );
// TODO: This copies the index keys, but it may not need to do so.
driver->refreshIndexKeys( nsDetailsTransient->indexKeys() );
}
}
// Let's fetch the next candidate object for this update.
Record* record = cursor->_current();
DiskLoc loc = cursor->currLoc();
const BSONObj oldObj = loc.obj();
// We count how many documents we scanned even though we may skip those that are
// deemed duplicated. The final 'numUpdated' and 'nscanned' numbers may differ for
// that reason.
opDebug->nscanned++;
// Skips this document if it:
// a) doesn't match the query portion of the update
// b) was deemed duplicate by the underlying cursor machinery
//
// Now, if we are going to update the document,
// c) we don't want to do so while the cursor is at it, as that may invalidate
// the cursor. So, we advance to next document, before issuing the update.
MatchDetails matchDetails;
matchDetails.requestElemMatchKey();
if ( !cursor->currentMatches( &matchDetails ) ) {
// a)
cursor->advance();
continue;
}
else if ( cursor->getsetdup( loc ) && dedupHere ) {
// b)
cursor->advance();
continue;
}
else if (!driver->isDocReplacement() && request.isMulti()) {
// c)
cursor->advance();
if ( dedupHere ) {
if ( seenLocs.count( loc ) ) {
continue;
}
}
// There are certain kind of cursors that hold multiple pointers to data
// underneath. $or cursors is one example. In a $or cursor, it may be the case
// that when we did the last advance(), we finished consuming documents from
// one of $or child and started consuming the next one. In that case, it is
// possible that the last document of the previous child is the same as the
// first document of the next (see SERVER-5198 and jstests/orp.js).
//
// So we advance the cursor here until we see a new diskloc.
//
// Note that we won't be yielding, and we may not do so for a while if we find
// a particularly duplicated sequence of loc's. That is highly unlikely,
// though. (See SERVER-5725, if curious, but "stage" based $or will make that
// ticket moot).
while( cursor->ok() && loc == cursor->currLoc() ) {
cursor->advance();
}
}
// For some (unfortunate) historical reasons, not all cursors would be valid after
// a write simply because we advanced them to a document not affected by the write.
// To protect in those cases, not only we engaged in the advance() logic above, but
// we also tell the cursor we're about to write a document that we've just seen.
// prepareToTouchEarlierIterate() requires calling later
// recoverFromTouchingEarlierIterate(), so we make a note here to do so.
bool touchPreviousDoc = request.isMulti() && cursor->ok();
if ( touchPreviousDoc ) {
if ( clientCursor.get() )
clientCursor->setDoingDeletes( true );
cursor->prepareToTouchEarlierIterate();
}
// Found a matching document
numMatched++;
// Ask the driver to apply the mods. It may be that the driver can apply those "in
// place", that is, some values of the old document just get adjusted without any
// change to the binary layout on the bson layer. It may be that a whole new
// document is needed to accomodate the new bson layout of the resulting document.
doc.reset( oldObj, mutablebson::Document::kInPlaceEnabled );
BSONObj logObj;
// If there was a matched field, obtain it.
string matchedField;
if (matchDetails.hasElemMatchKey())
matchedField = matchDetails.elemMatchKey();
Status status = driver->update( matchedField, &doc, &logObj );
if ( !status.isOK() ) {
uasserted( 16837, status.reason() );
}
// If the driver applied the mods in place, we can ask the mutable for what
// changed. We call those changes "damages". :) We use the damages to inform the
// journal what was changed, and then apply them to the original document
// ourselves. If, however, the driver applied the mods out of place, we ask it to
// generate a new, modified document for us. In that case, the file manager will
// take care of the journaling details for us.
//
// This code flow is admittedly odd. But, right now, journaling is baked in the file
// manager. And if we aren't using the file manager, we have to do jounaling
// ourselves.
bool objectWasChanged = false;
BSONObj newObj;
const char* source = NULL;
bool inPlace = doc.getInPlaceUpdates(&damages, &source);
if ( inPlace && !driver->modsAffectIndices() ) {
// If a set of modifiers were all no-ops, we are still 'in place', but there is
// no work to do, in which case we want to consider the object unchanged.
if (!damages.empty() ) {
nsDetails->paddingFits();
// All updates were in place. Apply them via durability and writing pointer.
mutablebson::DamageVector::const_iterator where = damages.begin();
const mutablebson::DamageVector::const_iterator end = damages.end();
for( ; where != end; ++where ) {
const char* sourcePtr = source + where->sourceOffset;
void* targetPtr = getDur().writingPtr(
const_cast<char*>(oldObj.objdata()) + where->targetOffset,
where->size);
std::memcpy(targetPtr, sourcePtr, where->size);
}
objectWasChanged = true;
opDebug->fastmod = true;
}
newObj = oldObj;
}
else {
// The updates were not in place. Apply them through the file manager.
newObj = doc.getObject();
DiskLoc newLoc = theDataFileMgr.updateRecord(nsString.ns().c_str(),
nsDetails,
nsDetailsTransient,
record,
loc,
newObj.objdata(),
newObj.objsize(),
*opDebug);
// If we've moved this object to a new location, make sure we don't apply
// that update again if our traversal picks the objecta again.
//
// We also take note that the diskloc if the updates are affecting indices.
// Chances are that we're traversing one of them and they may be multi key and
// therefore duplicate disklocs.
if ( newLoc != loc || driver->modsAffectIndices() ) {
seenLocs.insert( newLoc );
}
objectWasChanged = true;
}
// Log Obj
if ( request.shouldUpdateOpLog() ) {
if ( driver->isDocReplacement() || !logObj.isEmpty() ) {
BSONObj idQuery = driver->makeOplogEntryQuery(newObj, request.isMulti());
logOp("u", nsString.ns().c_str(), logObj , &idQuery,
NULL, request.isFromMigration(), &newObj);
}
}
// If it was noop since the document didn't change, record that.
if (!objectWasChanged)
opDebug->nupdateNoops++;
if (!request.isMulti()) {
break;
}
// If we used the cursor mechanism that prepares an earlier seen document for a
// write we need to tell such mechanisms that the write is over.
if ( touchPreviousDoc ) {
cursor->recoverFromTouchingEarlierIterate();
}
getDur().commitIfNeeded();
}
// TODO: Can this be simplified?
if ((numMatched > 0) || (numMatched == 0 && !request.isUpsert()) ) {
opDebug->nupdated = numMatched;
return UpdateResult( numMatched > 0 /* updated existing object(s) */,
!driver->isDocReplacement() /* $mod or obj replacement */,
numMatched /* # of docments update, even no-ops */,
BSONObj() );
}
//
// We haven't found any existing document so an insert is done
// (upsert is true).
//
opDebug->upsert = true;
// Since this is an insert (no docs found and upsert:true), we will be logging it
// as an insert in the oplog. We don't need the driver's help to build the
// oplog record, then. We also set the context of the update driver to the INSERT_CONTEXT.
// Some mods may only work in that context (e.g. $setOnInsert).
driver->setLogOp( false );
driver->setContext( ModifierInterface::ExecInfo::INSERT_CONTEXT );
BSONObj baseObj;
// Reset the document we will be writing to
doc.reset( baseObj, mutablebson::Document::kInPlaceDisabled );
if ( request.getQuery().hasElement("_id") ) {
uassertStatusOK(doc.root().appendElement(request.getQuery().getField("_id")));
}
// If this is a $mod base update, we need to generate a document by examining the
// query and the mods. Otherwise, we can use the object replacement sent by the user
// update command that was parsed by the driver before.
// In the following block we handle the query part, and then do the regular mods after.
if ( *request.getUpdates().firstElementFieldName() == '$' ) {
uassertStatusOK(UpdateDriver::createFromQuery(request.getQuery(), doc));
opDebug->fastmodinsert = true;
}
// Apply the update modifications and then log the update as an insert manually.
Status status = driver->update( StringData(), &doc, NULL /* no oplog record */);
if ( !status.isOK() ) {
uasserted( 16836, status.reason() );
}
BSONObj newObj = doc.getObject();
theDataFileMgr.insertWithObjMod( nsString.ns().c_str(), newObj, false, request.isGod() );
if ( request.shouldUpdateOpLog() ) {
logOp( "i", nsString.ns().c_str(), newObj,
NULL, NULL, request.isFromMigration(), &newObj );
}
opDebug->nupdated = 1;
return UpdateResult( false /* updated a non existing document */,
!driver->isDocReplacement() /* $mod or obj replacement? */,
1 /* count of updated documents */,
newObj /* object that was upserted */ );
}
UpdateResult update(
OperationContext* txn,
Database* db,
const UpdateRequest& request,
OpDebug* opDebug,
UpdateDriver* driver,
CanonicalQuery* cq) {
LOG(3) << "processing update : " << request;
std::auto_ptr<CanonicalQuery> cqHolder(cq);
const NamespaceString& nsString = request.getNamespaceString();
UpdateLifecycle* lifecycle = request.getLifecycle();
Collection* collection = db->getCollection(txn, nsString.ns());
validateUpdate(nsString.ns().c_str(), request.getUpdates(), request.getQuery());
// TODO: This seems a bit circuitious.
opDebug->updateobj = request.getUpdates();
if (lifecycle) {
lifecycle->setCollection(collection);
driver->refreshIndexKeys(lifecycle->getIndexKeys());
}
Runner* rawRunner;
Status status = cq ?
getRunner(collection, cqHolder.release(), &rawRunner) :
getRunner(collection, nsString.ns(), request.getQuery(), &rawRunner, &cq);
uassert(17243,
"could not get runner " + request.getQuery().toString() + "; " + causedBy(status),
status.isOK());
// Create the runner and setup all deps.
auto_ptr<Runner> runner(rawRunner);
// Register Runner with ClientCursor
const ScopedRunnerRegistration safety(runner.get());
//
// We'll start assuming we have one or more documents for this update. (Otherwise,
// we'll fall-back to insert case (if upsert is true).)
//
// We are an update until we fall into the insert case below.
driver->setContext(ModifierInterface::ExecInfo::UPDATE_CONTEXT);
int numMatched = 0;
// If the update was in-place, we may see it again. This only matters if we're doing
// a multi-update; if we're not doing a multi-update we stop after one update and we
// won't see any more docs.
//
// For example: If we're scanning an index {x:1} and performing {$inc:{x:5}}, we'll keep
// moving the document forward and it will continue to reappear in our index scan.
// Unless the index is multikey, the underlying query machinery won't de-dup.
//
// If the update wasn't in-place we may see it again. Our query may return the new
// document and we wouldn't want to update that.
//
// So, no matter what, we keep track of where the doc wound up.
typedef unordered_set<DiskLoc, DiskLoc::Hasher> DiskLocSet;
const scoped_ptr<DiskLocSet> updatedLocs(request.isMulti() ? new DiskLocSet : NULL);
// Reset these counters on each call. We might re-enter this function to retry this
// update if we throw a page fault exception below, and we rely on these counters
// reflecting only the actions taken locally. In particlar, we must have the no-op
// counter reset so that we can meaningfully comapre it with numMatched above.
opDebug->nscanned = 0;
opDebug->nscannedObjects = 0;
opDebug->nModified = 0;
// Get the cached document from the update driver.
mutablebson::Document& doc = driver->getDocument();
mutablebson::DamageVector damages;
// Used during iteration of docs
BSONObj oldObj;
// Get first doc, and location
Runner::RunnerState state = Runner::RUNNER_ADVANCED;
uassert(ErrorCodes::NotMaster,
mongoutils::str::stream() << "Not primary while updating " << nsString.ns(),
!request.shouldCallLogOp()
|| repl::getGlobalReplicationCoordinator()->canAcceptWritesForDatabase(
nsString.db()));
while (true) {
// Get next doc, and location
DiskLoc loc;
state = runner->getNext(&oldObj, &loc);
if (state != Runner::RUNNER_ADVANCED) {
if (state == Runner::RUNNER_EOF) {
// We have reached the logical end of the loop, so do yielding recovery
break;
}
else {
uassertStatusOK(Status(ErrorCodes::InternalError,
str::stream() << " Update query failed -- "
<< Runner::statestr(state)));
}
}
// We fill this with the new locs of moved doc so we don't double-update.
if (updatedLocs && updatedLocs->count(loc) > 0) {
continue;
}
// We count how many documents we scanned even though we may skip those that are
// deemed duplicated. The final 'numMatched' and 'nscanned' numbers may differ for
// that reason.
// TODO: Do we want to pull this out of the underlying query plan?
opDebug->nscanned++;
// Found a matching document
opDebug->nscannedObjects++;
numMatched++;
// Ask the driver to apply the mods. It may be that the driver can apply those "in
// place", that is, some values of the old document just get adjusted without any
// change to the binary layout on the bson layer. It may be that a whole new
// document is needed to accomodate the new bson layout of the resulting document.
doc.reset(oldObj, mutablebson::Document::kInPlaceEnabled);
BSONObj logObj;
FieldRefSet updatedFields;
Status status = Status::OK();
if (!driver->needMatchDetails()) {
// If we don't need match details, avoid doing the rematch
status = driver->update(StringData(), &doc, &logObj, &updatedFields);
}
else {
// If there was a matched field, obtain it.
MatchDetails matchDetails;
matchDetails.requestElemMatchKey();
dassert(cq);
verify(cq->root()->matchesBSON(oldObj, &matchDetails));
string matchedField;
if (matchDetails.hasElemMatchKey())
matchedField = matchDetails.elemMatchKey();
// TODO: Right now, each mod checks in 'prepare' that if it needs positional
// data, that a non-empty StringData() was provided. In principle, we could do
// that check here in an else clause to the above conditional and remove the
// checks from the mods.
status = driver->update(matchedField, &doc, &logObj, &updatedFields);
}
if (!status.isOK()) {
uasserted(16837, status.reason());
}
// Ensure _id exists and is first
uassertStatusOK(ensureIdAndFirst(doc));
// If the driver applied the mods in place, we can ask the mutable for what
// changed. We call those changes "damages". :) We use the damages to inform the
// journal what was changed, and then apply them to the original document
// ourselves. If, however, the driver applied the mods out of place, we ask it to
// generate a new, modified document for us. In that case, the file manager will
// take care of the journaling details for us.
//
// This code flow is admittedly odd. But, right now, journaling is baked in the file
// manager. And if we aren't using the file manager, we have to do jounaling
// ourselves.
bool docWasModified = false;
BSONObj newObj;
const char* source = NULL;
bool inPlace = doc.getInPlaceUpdates(&damages, &source);
// If something changed in the document, verify that no immutable fields were changed
// and data is valid for storage.
if ((!inPlace || !damages.empty()) ) {
if (!(request.isFromReplication() || request.isFromMigration())) {
const std::vector<FieldRef*>* immutableFields = NULL;
if (lifecycle)
immutableFields = lifecycle->getImmutableFields();
uassertStatusOK(validate(oldObj,
updatedFields,
doc,
immutableFields,
driver->modOptions()) );
}
}
// Save state before making changes
runner->saveState();
if (inPlace && !driver->modsAffectIndices()) {
// If a set of modifiers were all no-ops, we are still 'in place', but there is
// no work to do, in which case we want to consider the object unchanged.
if (!damages.empty() ) {
collection->updateDocumentWithDamages( txn, loc, source, damages );
docWasModified = true;
opDebug->fastmod = true;
}
newObj = oldObj;
}
else {
// The updates were not in place. Apply them through the file manager.
// XXX: With experimental document-level locking, we do not hold the sufficient
// locks, so this would cause corruption.
fassert(18516, !useExperimentalDocLocking);
newObj = doc.getObject();
uassert(17419,
str::stream() << "Resulting document after update is larger than "
<< BSONObjMaxUserSize,
newObj.objsize() <= BSONObjMaxUserSize);
StatusWith<DiskLoc> res = collection->updateDocument(txn,
loc,
newObj,
true,
opDebug);
uassertStatusOK(res.getStatus());
DiskLoc newLoc = res.getValue();
docWasModified = true;
// If the document moved, we might see it again in a collection scan (maybe it's
// a document after our current document).
//
// If the document is indexed and the mod changes an indexed value, we might see it
// again. For an example, see the comment above near declaration of updatedLocs.
if (updatedLocs && (newLoc != loc || driver->modsAffectIndices())) {
updatedLocs->insert(newLoc);
}
}
// Restore state after modification
uassert(17278,
"Update could not restore runner state after updating a document.",
runner->restoreState(txn));
// Call logOp if requested.
if (request.shouldCallLogOp() && !logObj.isEmpty()) {
BSONObj idQuery = driver->makeOplogEntryQuery(newObj, request.isMulti());
repl::logOp(txn, "u", nsString.ns().c_str(), logObj , &idQuery,
NULL, request.isFromMigration());
}
// Only record doc modifications if they wrote (exclude no-ops)
if (docWasModified)
opDebug->nModified++;
if (!request.isMulti()) {
break;
}
// Opportunity for journaling to write during the update.
txn->recoveryUnit()->commitIfNeeded();
}
// TODO: Can this be simplified?
if ((numMatched > 0) || (numMatched == 0 && !request.isUpsert()) ) {
opDebug->nMatched = numMatched;
return UpdateResult(numMatched > 0 /* updated existing object(s) */,
!driver->isDocReplacement() /* $mod or obj replacement */,
opDebug->nModified /* number of modified docs, no no-ops */,
numMatched /* # of docs matched/updated, even no-ops */,
BSONObj());
}
//
// We haven't found any existing document so an insert is done
// (upsert is true).
//
opDebug->upsert = true;
// Since this is an insert (no docs found and upsert:true), we will be logging it
// as an insert in the oplog. We don't need the driver's help to build the
// oplog record, then. We also set the context of the update driver to the INSERT_CONTEXT.
// Some mods may only work in that context (e.g. $setOnInsert).
driver->setLogOp(false);
driver->setContext(ModifierInterface::ExecInfo::INSERT_CONTEXT);
// Reset the document we will be writing to
doc.reset();
// This remains the empty object in the case of an object replacement, but in the case
// of an upsert where we are creating a base object from the query and applying mods,
// we capture the query as the original so that we can detect immutable field mutations.
BSONObj original = BSONObj();
// Calling createFromQuery will populate the 'doc' with fields from the query which
// creates the base of the update for the inserterd doc (because upsert was true)
if (cq) {
uassertStatusOK(driver->populateDocumentWithQueryFields(cq, doc));
// Validate the base doc, as taken from the query -- no fields means validate all.
FieldRefSet noFields;
uassertStatusOK(validate(BSONObj(), noFields, doc, NULL, driver->modOptions()));
if (!driver->isDocReplacement()) {
opDebug->fastmodinsert = true;
// We need all the fields from the query to compare against for validation below.
original = doc.getObject();
}
else {
original = request.getQuery();
}
}
else {
fassert(17354, CanonicalQuery::isSimpleIdQuery(request.getQuery()));
BSONElement idElt = request.getQuery()["_id"];
original = idElt.wrap();
fassert(17352, doc.root().appendElement(idElt));
}
// Apply the update modifications and then log the update as an insert manually.
FieldRefSet updatedFields;
status = driver->update(StringData(), &doc, NULL, &updatedFields);
if (!status.isOK()) {
uasserted(16836, status.reason());
}
// Ensure _id exists and is first
uassertStatusOK(ensureIdAndFirst(doc));
// Validate that the object replacement or modifiers resulted in a document
// that contains all the immutable keys and can be stored.
if (!(request.isFromReplication() || request.isFromMigration())){
const std::vector<FieldRef*>* immutableFields = NULL;
if (lifecycle)
immutableFields = lifecycle->getImmutableFields();
// This will only validate the modified fields if not a replacement.
uassertStatusOK(validate(original,
updatedFields,
doc,
immutableFields,
driver->modOptions()) );
}
// Only create the collection if the doc will be inserted.
if (!collection) {
collection = db->getCollection(txn, request.getNamespaceString().ns());
if (!collection) {
collection = db->createCollection(txn, request.getNamespaceString().ns());
}
}
// Insert the doc
BSONObj newObj = doc.getObject();
uassert(17420,
str::stream() << "Document to upsert is larger than " << BSONObjMaxUserSize,
newObj.objsize() <= BSONObjMaxUserSize);
StatusWith<DiskLoc> newLoc = collection->insertDocument(txn,
newObj,
!request.isGod() /*enforceQuota*/);
uassertStatusOK(newLoc.getStatus());
if (request.shouldCallLogOp()) {
repl::logOp(txn, "i", nsString.ns().c_str(), newObj,
NULL, NULL, request.isFromMigration());
}
opDebug->nMatched = 1;
return UpdateResult(false /* updated a non existing document */,
!driver->isDocReplacement() /* $mod or obj replacement? */,
1 /* docs written*/,
1 /* count of updated documents */,
newObj /* object that was upserted */ );
}
int
PeerServer::process_request(RemoteConnection& connection)
{
uint8_t opcode;
#if (DBG >= DBG_LOT)
cout << "Request received from : " << connection.remote.to_string() << endl;
#endif
connection.deserialize(opcode);
if (opcode == JOIN) {
string content = "OK";
JoinRequest request;
set<Member>::iterator ret;
/* Process the join request. */
request.deserialize(connection);
cout << "JOIN-REQUEST(" << request.ip << "," << request.port
<< ")" << endl;
Member member(Remote(request.ip, request.port));
ret = add_member(member);
if (ret == members.end()) {
content = "Already joined";
}
Response(content).serialize(connection);
sync_new_member(ret);
notify_old_members_add(ret);
} else if (opcode == LEAVE) {
string content = "OK";
LeaveRequest request;
int ret;
request.deserialize(connection);
cout << "LEAVE-REQUEST(" << request.ip << "," << request.port
<< ")" << endl;
Member member(Remote(request.ip, request.port));
ret = del_member(member);
if (ret) {
content = "No previous join";
}
Response(content).serialize(connection);
notify_old_members_del(member);
} else if (opcode == UPDATE) {
UpdateRequest request;
request.deserialize(connection);
cout << "UPDATE-REQUEST-" << request.add << "-(" <<
request.members.size() << ")" << endl;
for (unsigned int i = 0; i < request.members.size(); i++) {
const Member& m = request.members[i];
cout << " Member " << m.to_string() << endl;
if (request.add) {
add_member(m);
} else {
del_member(m);
}
}
} else {
/* Forward the request to the derived class. */
process_message(opcode, connection);
}
return 0;
}
void updateSessionEntry(OperationContext* opCtx, const UpdateRequest& updateRequest) {
// Current code only supports replacement update.
dassert(UpdateDriver::isDocReplacement(updateRequest.getUpdates()));
AutoGetCollection autoColl(opCtx, NamespaceString::kSessionTransactionsTableNamespace, MODE_IX);
uassert(40527,
str::stream() << "Unable to persist transaction state because the session transaction "
"collection is missing. This indicates that the "
<< NamespaceString::kSessionTransactionsTableNamespace.ns()
<< " collection has been manually deleted.",
autoColl.getCollection());
WriteUnitOfWork wuow(opCtx);
auto collection = autoColl.getCollection();
auto idIndex = collection->getIndexCatalog()->findIdIndex(opCtx);
uassert(40672,
str::stream() << "Failed to fetch _id index for "
<< NamespaceString::kSessionTransactionsTableNamespace.ns(),
idIndex);
auto indexAccess = collection->getIndexCatalog()->getIndex(idIndex);
// Since we are looking up a key inside the _id index, create a key object consisting of only
// the _id field.
auto idToFetch = updateRequest.getQuery().firstElement();
auto toUpdateIdDoc = idToFetch.wrap();
dassert(idToFetch.fieldNameStringData() == "_id"_sd);
auto recordId = indexAccess->findSingle(opCtx, toUpdateIdDoc);
auto startingSnapshotId = opCtx->recoveryUnit()->getSnapshotId();
if (recordId.isNull()) {
// Upsert case.
auto status = collection->insertDocument(
opCtx, InsertStatement(updateRequest.getUpdates()), nullptr, true, false);
if (status == ErrorCodes::DuplicateKey) {
throw WriteConflictException();
}
uassertStatusOK(status);
wuow.commit();
return;
}
auto originalRecordData = collection->getRecordStore()->dataFor(opCtx, recordId);
auto originalDoc = originalRecordData.toBson();
invariant(collection->getDefaultCollator() == nullptr);
boost::intrusive_ptr<ExpressionContext> expCtx(new ExpressionContext(opCtx, nullptr));
auto matcher = fassertStatusOK(
40673, MatchExpressionParser::parse(updateRequest.getQuery(), std::move(expCtx)));
if (!matcher->matchesBSON(originalDoc)) {
// Document no longer match what we expect so throw WCE to make the caller re-examine.
throw WriteConflictException();
}
OplogUpdateEntryArgs args;
args.nss = NamespaceString::kSessionTransactionsTableNamespace;
args.uuid = collection->uuid();
args.update = updateRequest.getUpdates();
args.criteria = toUpdateIdDoc;
args.fromMigrate = false;
collection->updateDocument(opCtx,
recordId,
Snapshotted<BSONObj>(startingSnapshotId, originalDoc),
updateRequest.getUpdates(),
true, // enforceQuota
false, // indexesAffected = false because _id is the only index
nullptr,
&args);
wuow.commit();
}
void WorldModel::update(const UpdateRequest& req)
{
if (req.empty())
return;
// Increase revision number
++revision_;
std::map<UUID, EntityPtr> new_entities;
// Update poses
for(std::map<UUID, geo::Pose3D>::const_iterator it = req.poses.begin(); it != req.poses.end(); ++it)
{
EntityPtr e = getOrAddEntity(it->first, new_entities);
e->setPose(it->second);
}
// Update shapes
for(std::map<UUID, geo::ShapeConstPtr>::const_iterator it = req.shapes.begin(); it != req.shapes.end(); ++it)
{
EntityPtr e = getOrAddEntity(it->first, new_entities);
e->setShape(it->second);
}
// Update types
for(std::map<UUID, std::string>::const_iterator it = req.types.begin(); it != req.types.end(); ++it)
{
EntityPtr e = getOrAddEntity(it->first, new_entities);
e->setType(it->second);
}
// Update relations
for(std::map<UUID, std::map<UUID, RelationConstPtr> >::const_iterator it = req.relations.begin(); it != req.relations.end(); ++it)
{
Idx idx1;
if (findEntityIdx(it->first, idx1))
{
const std::map<UUID, RelationConstPtr>& rels = it->second;
for(std::map<UUID, RelationConstPtr>::const_iterator it2 = rels.begin(); it2 != rels.end(); ++it2)
{
Idx idx2;
if (findEntityIdx(it2->first, idx2))
setRelation(idx1, idx2, it2->second);
else
std::cout << "WorldModel::update (relation): unknown entity: '" << it2->first << "'." << std::endl;
}
}
else
std::cout << "WorldModel::update (relation): unknown entity: '" << it->first << "'." << std::endl;
}
// Update additional info (data)
for(std::map<UUID, tue::config::DataConstPointer>::const_iterator it = req.datas.begin(); it != req.datas.end(); ++it)
{
EntityPtr e = getOrAddEntity(it->first, new_entities);
tue::config::DataPointer params;
params.add(e->data());
params.add(it->second);
tue::config::Reader r(params);
std::string type;
if (r.value("type", type, tue::config::OPTIONAL))
e->setType(type);
e->setData(params);
}
// Remove entities
for(std::set<UUID>::const_iterator it = req.removed_entities.begin(); it != req.removed_entities.end(); ++it)
{
removeEntity(*it);
}
}
