Esempio n. 1
0
void Group::MenuGroup(int id) {
    Group g;
    ZERO(&g);
    g.visible = true;
    g.color = RGBi(100, 100, 100);
    g.scale = 1;

    if(id >= RECENT_IMPORT && id < (RECENT_IMPORT + MAX_RECENT)) {
        strcpy(g.impFile, RecentFile[id-RECENT_IMPORT]);
        id = GraphicsWindow::MNU_GROUP_IMPORT;
    }

    SS.GW.GroupSelection();

    switch(id) {
        case GraphicsWindow::MNU_GROUP_3D:
            g.type = DRAWING_3D;
            g.name.strcpy("sketch-in-3d");
            break;

        case GraphicsWindow::MNU_GROUP_WRKPL:
            g.type = DRAWING_WORKPLANE;
            g.name.strcpy("sketch-in-plane");
            if(gs.points == 1 && gs.n == 1) {
                g.subtype = WORKPLANE_BY_POINT_ORTHO;

                Vector u = SS.GW.projRight, v = SS.GW.projUp;
                u = u.ClosestOrtho();
                v = v.Minus(u.ScaledBy(v.Dot(u)));
                v = v.ClosestOrtho();

                g.predef.q = Quaternion::From(u, v);
                g.predef.origin = gs.point[0];
            } else if(gs.points == 1 && gs.lineSegments == 2 && gs.n == 3) {
                g.subtype = WORKPLANE_BY_LINE_SEGMENTS;

                g.predef.origin = gs.point[0];
                g.predef.entityB = gs.entity[0];
                g.predef.entityC = gs.entity[1];

                Vector ut = SK.GetEntity(g.predef.entityB)->VectorGetNum();
                Vector vt = SK.GetEntity(g.predef.entityC)->VectorGetNum();
                ut = ut.WithMagnitude(1);
                vt = vt.WithMagnitude(1);

                if(fabs(SS.GW.projUp.Dot(vt)) < fabs(SS.GW.projUp.Dot(ut))) {
                    SWAP(Vector, ut, vt);
                    g.predef.swapUV = true;
                }
                if(SS.GW.projRight.Dot(ut) < 0) g.predef.negateU = true;
                if(SS.GW.projUp.   Dot(vt) < 0) g.predef.negateV = true;
            } else {
                Error("Bad selection for new sketch in workplane. This "
                      "group can be created with:\n\n"
                      "    * a point (orthogonal to coordinate axes, "
                             "through the point)\n"
                      "    * a point and two line segments (parallel to the "
                             "lines, through the point)\n");
                return;
            }
            break;

        case GraphicsWindow::MNU_GROUP_EXTRUDE:
            if(!SS.GW.LockedInWorkplane()) {
                Error("Select a workplane (Sketch -> In Workplane) before "
                      "extruding. The sketch will be extruded normal to the "
                      "workplane.");
                return;
            }
            g.type = EXTRUDE;
            g.opA = SS.GW.activeGroup;
            g.predef.entityB = SS.GW.ActiveWorkplane();
            g.subtype = ONE_SIDED;
            g.name.strcpy("extrude");
            break;

        case GraphicsWindow::MNU_GROUP_LATHE:
            if(gs.points == 1 && gs.vectors == 1 && gs.n == 2) {
                g.predef.origin = gs.point[0];
                g.predef.entityB = gs.vector[0];
            } else if(gs.lineSegments == 1 && gs.n == 1) {
                g.predef.origin = SK.GetEntity(gs.entity[0])->point[0];
                g.predef.entityB = gs.entity[0];
                // since a line segment is a vector
            } else {
                Error("Bad selection for new lathe group. This group can "
                      "be created with:\n\n"
                      "    * a point and a line segment or normal "
                               "(revolved about an axis parallel to line / "
                               "normal, through point)\n"
                      "    * a line segment (revolved about line segment)\n");
                return;
            }
            g.type = LATHE;
            g.opA = SS.GW.activeGroup;
            g.name.strcpy("lathe");
            break;

        case GraphicsWindow::MNU_GROUP_ROT: {
            if(gs.points == 1 && gs.n == 1 && SS.GW.LockedInWorkplane()) {
                g.predef.origin = gs.point[0];
                Entity *w = SK.GetEntity(SS.GW.ActiveWorkplane());
                g.predef.entityB = w->Normal()->h;
                g.activeWorkplane = w->h;
            } else if(gs.points == 1 && gs.vectors == 1 && gs.n == 2) {
                g.predef.origin = gs.point[0];
                g.predef.entityB = gs.vector[0];
            } else {
                Error("Bad selection for new rotation. This group can "
                      "be created with:\n\n"
                      "    * a point, while locked in workplane (rotate "
                            "in plane, about that point)\n"
                      "    * a point and a line or a normal (rotate about "
                            "an axis through the point, and parallel to "
                            "line / normal)\n");
                return;
            }
            g.type = ROTATE;
            g.opA = SS.GW.activeGroup;
            g.valA = 3;
            g.subtype = ONE_SIDED;
            g.name.strcpy("rotate");
            break;
        }

        case GraphicsWindow::MNU_GROUP_TRANS:
            g.type = TRANSLATE;
            g.opA = SS.GW.activeGroup;
            g.valA = 3;
            g.subtype = ONE_SIDED;
            g.predef.entityB = SS.GW.ActiveWorkplane();
            g.activeWorkplane = SS.GW.ActiveWorkplane();
            g.name.strcpy("translate");
            break;

        case GraphicsWindow::MNU_GROUP_IMPORT: {
            g.type = IMPORTED;
            g.opA = SS.GW.activeGroup;
            if(strlen(g.impFile) == 0) {
                if(!GetOpenFile(g.impFile, SLVS_EXT, SLVS_PATTERN)) return;
            }

            // Assign the default name of the group based on the name of
            // the imported file.
            char groupName[MAX_PATH];
            strcpy(groupName, g.impFile);
            char *dot = strrchr(groupName, '.');
            if(dot) *dot = '\0';

            char *s, *start = groupName;
            for(s = groupName; *s; s++) {
                if(*s == '/' || *s == '\\') {
                    start = s + 1;
                } else if(isalnum(*s)) {
                    // do nothing, valid character
                } else {
                    // convert invalid characters (like spaces) to dashes
                    *s = '-';
                }
            }
            if(strlen(start) > 0) {
                g.name.strcpy(start);
            } else {
                g.name.strcpy("import");
            }

            g.meshCombine = COMBINE_AS_ASSEMBLE;
            break;
        }

        default: oops();
    }
    SS.GW.ClearSelection();
    SS.UndoRemember();

    SK.group.AddAndAssignId(&g);
    Group *gg = SK.GetGroup(g.h);

    if(gg->type == IMPORTED) {
        SS.ReloadAllImported();
    }
    gg->clean = false;
    SS.GW.activeGroup = gg->h;
    SS.GenerateAll();
    if(gg->type == DRAWING_WORKPLANE) {
        // Can't set the active workplane for this one until after we've
        // regenerated, because the workplane doesn't exist until then.
        gg->activeWorkplane = gg->h.entity(0);
    }
    gg->Activate();
    SS.GW.AnimateOntoWorkplane();
    TextWindow::ScreenSelectGroup(0, gg->h.v);
    SS.later.showTW = true;
}
Esempio n. 2
0
void GraphicsWindow::MenuEdit(int id) {
    switch(id) {
        case MNU_UNSELECT_ALL:
            SS.GW.GroupSelection();
            // If there's nothing selected to de-select, and no operation
            // to cancel, then perhaps they want to return to the home
            // screen in the text window.
            if(SS.GW.gs.n               == 0 &&
               SS.GW.gs.constraints     == 0 &&
               SS.GW.pending.operation  == 0)
            {
                if(!(TextEditControlIsVisible() ||
                     GraphicsEditControlIsVisible()))
                {
                    if(SS.TW.shown.screen == TextWindow::SCREEN_STYLE_INFO) {
                        SS.TW.GoToScreen(TextWindow::SCREEN_LIST_OF_STYLES);
                    } else {
                        SS.TW.ClearSuper();
                    }
                }
            }
            SS.GW.ClearSuper();
            SS.TW.HideEditControl();
            SS.nakedEdges.Clear();
            SS.justExportedInfo.draw = false;
            // This clears the marks drawn to indicate which points are
            // still free to drag.
            Param *p;
            for(p = SK.param.First(); p; p = SK.param.NextAfter(p)) {
                p->free = false;
            }
            if(SS.exportMode) {
                SS.exportMode = false;
                SS.GenerateAll(SolveSpaceUI::GENERATE_ALL);
            }
            break;

        case MNU_SELECT_ALL: {
            Entity *e;
            for(e = SK.entity.First(); e; e = SK.entity.NextAfter(e)) {
                if(e->group.v != SS.GW.activeGroup.v) continue;
                if(e->IsFace() || e->IsDistance()) continue;
                if(!e->IsVisible()) continue;

                SS.GW.MakeSelected(e->h);
            }
            InvalidateGraphics();
            SS.ScheduleShowTW();
            break;
        }

        case MNU_SELECT_CHAIN: {
            Entity *e;
            int newlySelected = 0;
            bool didSomething;
            do {
                didSomething = false;
                for(e = SK.entity.First(); e; e = SK.entity.NextAfter(e)) {
                    if(e->group.v != SS.GW.activeGroup.v) continue;
                    if(!e->HasEndpoints()) continue;
                    if(!e->IsVisible()) continue;

                    Vector st = e->EndpointStart(),
                           fi = e->EndpointFinish();

                    bool onChain = false, alreadySelected = false;
                    List<Selection> *ls = &(SS.GW.selection);
                    for(Selection *s = ls->First(); s; s = ls->NextAfter(s)) {
                        if(!s->entity.v) continue;
                        if(s->entity.v == e->h.v) {
                            alreadySelected = true;
                            continue;
                        }
                        Entity *se = SK.GetEntity(s->entity);
                        if(!se->HasEndpoints()) continue;

                        Vector sst = se->EndpointStart(),
                               sfi = se->EndpointFinish();

                        if(sst.Equals(st) || sst.Equals(fi) ||
                           sfi.Equals(st) || sfi.Equals(fi))
                        {
                            onChain = true;
                        }
                    }
                    if(onChain && !alreadySelected) {
                        SS.GW.MakeSelected(e->h);
                        newlySelected++;
                        didSomething = true;
                    }
                }
            } while(didSomething);
            if(newlySelected == 0) {
                Error("No additional entities share endpoints with the "
                      "selected entities.");
            }
            InvalidateGraphics();
            SS.ScheduleShowTW();
            break;
        }

        case MNU_ROTATE_90: {
            SS.GW.GroupSelection();
            Entity *e = NULL;
            if(SS.GW.gs.n == 1 && SS.GW.gs.points == 1) {
                e = SK.GetEntity(SS.GW.gs.point[0]);
            } else if(SS.GW.gs.n == 1 && SS.GW.gs.entities == 1) {
                e = SK.GetEntity(SS.GW.gs.entity[0]);
            }
            SS.GW.ClearSelection();

            hGroup hg = e ? e->group : SS.GW.activeGroup;
            Group *g = SK.GetGroup(hg);
            if(g->type != Group::IMPORTED) {
                Error("To use this command, select a point or other "
                      "entity from an imported part, or make an import "
                      "group the active group.");
                break;
            }


            SS.UndoRemember();
            // Rotate by ninety degrees about the coordinate axis closest
            // to the screen normal.
            Vector norm = SS.GW.projRight.Cross(SS.GW.projUp);
            norm = norm.ClosestOrtho();
            norm = norm.WithMagnitude(1);
            Quaternion qaa = Quaternion::From(norm, PI/2);

            g->TransformImportedBy(Vector::From(0, 0, 0), qaa);

            // and regenerate as necessary.
            SS.MarkGroupDirty(hg);
            SS.GenerateAll();
            break;
        }

        case MNU_SNAP_TO_GRID: {
            if(!SS.GW.LockedInWorkplane()) {
                Error("No workplane is active. Select a workplane to define "
                      "the plane for the snap grid.");
                break;
            }
            SS.GW.GroupSelection();
            if(SS.GW.gs.points == 0 && SS.GW.gs.constraintLabels == 0) {
                Error("Can't snap these items to grid; select points, "
                      "text comments, or constraints with a label. "
                      "To snap a line, select its endpoints.");
                break;
            }
            SS.UndoRemember();

            List<Selection> *ls = &(SS.GW.selection);
            for(Selection *s = ls->First(); s; s = ls->NextAfter(s)) {
                if(s->entity.v) {
                    hEntity hp = s->entity;
                    Entity *ep = SK.GetEntity(hp);
                    if(!ep->IsPoint()) continue;

                    Vector p = ep->PointGetNum();
                    ep->PointForceTo(SS.GW.SnapToGrid(p));
                    SS.GW.pending.points.Add(&hp);
                    SS.MarkGroupDirty(ep->group);
                } else if(s->constraint.v) {
                    Constraint *c = SK.GetConstraint(s->constraint);
                    c->disp.offset = SS.GW.SnapToGrid(c->disp.offset);
                }
            }
            // Regenerate, with these points marked as dragged so that they
            // get placed as close as possible to our snap grid.
            SS.GenerateAll();
            SS.GW.ClearPending();

            SS.GW.ClearSelection();
            InvalidateGraphics();
            break;
        }

        case MNU_UNDO:
            SS.UndoUndo();
            break;

        case MNU_REDO:
            SS.UndoRedo();
            break;

        case MNU_REGEN_ALL:
            SS.ReloadAllImported();
            SS.GenerateAll(SolveSpaceUI::GENERATE_UNTIL_ACTIVE);
            SS.ScheduleShowTW();
            break;

        default: oops();
    }
}