void
TaskDefaultsConfigPanel::Prepare(ContainerWindow &parent, const PixelRect &rc)
{
WndProperty *wp;
const ComputerSettings &settings_computer = XCSoarInterface::GetComputerSettings();
const TaskBehaviour &task_behaviour = settings_computer.task;
OrderedTask temptask(task_behaviour);
temptask.SetFactory(TaskFactoryType::RACING);
RowFormWidget::Prepare(parent, rc);
wp = AddEnum(_("Start point"),
_("Default start type for new tasks you create."),
this);
if (wp) {
const auto point_types = temptask.GetFactory().GetValidStartTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (auto i = point_types.begin(), end = point_types.end();
i != end; ++i) {
const AbstractTaskFactory::LegalPointType type = *i;
dfe->addEnumText(OrderedTaskPointName(type), (unsigned)type,
OrderedTaskPointDescription(type));
if (type == task_behaviour.sector_defaults.start_type)
dfe->Set((unsigned)type);
}
wp->RefreshDisplay();
}
AddFloat(Caption_GateWidth, _("Default radius or gate width of the start zone for new tasks."),
_T("%.1f %s"), _T("%.1f"), fixed(0.1), fixed(100), fixed(1.0), true, UnitGroup::DISTANCE,
task_behaviour.sector_defaults.start_radius);
AddSpacer();
wp = AddEnum(_("Finish point"),
_("Default finish type for new tasks you create."),
this);
if (wp) {
const auto point_types = temptask.GetFactory().GetValidFinishTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (auto i = point_types.begin(), end = point_types.end();
i != end; ++i) {
const AbstractTaskFactory::LegalPointType type = *i;
dfe->addEnumText(OrderedTaskPointName(type), (unsigned)type,
OrderedTaskPointDescription(type));
if (type == task_behaviour.sector_defaults.finish_type)
dfe->Set((unsigned)type);
}
wp->RefreshDisplay();
}
AddFloat(Caption_GateWidth, _("Default radius or gate width of the finish zone in new tasks."),
_T("%.1f %s"), _T("%.1f"), fixed(0.1), fixed(100), fixed(1.0), true, UnitGroup::DISTANCE,
task_behaviour.sector_defaults.finish_radius);
AddSpacer();
wp = AddEnum(_("Turn point"), _("Default turn point type for new tasks you create."));
if (wp) {
const auto point_types = temptask.GetFactory().GetValidIntermediateTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (auto i = point_types.begin(), end = point_types.end();
i != end; ++i) {
const AbstractTaskFactory::LegalPointType type = *i;
dfe->addEnumText(OrderedTaskPointName(type), (unsigned)type,
OrderedTaskPointDescription(type));
if (type == task_behaviour.sector_defaults.turnpoint_type) {
dfe->Set((unsigned)type);
}
}
wp->RefreshDisplay();
}
AddFloat(Caption_Radius, _("Default radius of turnpoint cylinders and sectors in new tasks."),
_T("%.1f %s"), _T("%.1f"), fixed(0.1), fixed(100), fixed(1.0), true, UnitGroup::DISTANCE,
task_behaviour.sector_defaults.turnpoint_radius);
AddSpacer();
wp = AddEnum(_("Task"), _("Default task type for new tasks you create."));
if (wp) {
const std::vector<TaskFactoryType> factory_types =
temptask.GetFactoryTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (unsigned i = 0; i < factory_types.size(); i++) {
dfe->addEnumText(OrderedTaskFactoryName(factory_types[i]),
(unsigned)factory_types[i], OrderedTaskFactoryDescription(
factory_types[i]));
if (factory_types[i] == task_behaviour.task_type_default)
dfe->Set((unsigned)factory_types[i]);
}
wp->RefreshDisplay();
}
AddTime(_("AAT min. time"), _("Default AAT min. time for new AAT tasks."),
60, 10 * 60 * 60, 60, (unsigned)task_behaviour.ordered_defaults.aat_min_time);
AddTime(_("Optimisation margin"),
_("Safety margin for AAT task optimisation. Optimisation "
"seeks to complete the task at the minimum time plus this margin time."),
0, 30 * 60, 60, (unsigned)task_behaviour.optimise_targets_margin);
SetExpertRow(AATTimeMargin);
SetStartLabel();
SetFinishLabel();
}
static void
RefreshCalculator(void)
{
WndProperty* wp;
// update outputs
wp = (WndProperty*)wf->FindByName(_T("prpAATEst"));
if (wp) {
wp->GetDataField()->SetAsFloat((
XCSoarInterface::Calculated().common_stats.task_time_remaining +
XCSoarInterface::Calculated().common_stats.task_time_elapsed) / 60);
wp->RefreshDisplay();
}
// update outputs
wp = (WndProperty*)wf->FindByName(_T("prpAATTime"));
if (wp) {
if (XCSoarInterface::Calculated().task_stats.has_targets) {
wp->GetDataField()->SetAsFloat(
protected_task_manager.get_ordered_task_behaviour().aat_min_time / 60);
wp->RefreshDisplay();
} else {
wp->hide();
}
}
wp = (WndProperty*)wf->FindByName(_T("prpDistance"));
if (wp) {
wp->GetDataField()->SetAsFloat(Units::ToUserDistance(
XCSoarInterface::Calculated().task_stats.total.solution_planned.Vector.Distance));
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpMacCready"));
if (wp) {
wp->GetDataField()->SetUnits(Units::GetVerticalSpeedName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpEffectiveMacCready"));
if (wp) {
wp->GetDataField()->SetUnits(Units::GetVerticalSpeedName());
wp->GetDataField()->SetAsFloat(Units::ToUserVSpeed(emc));
wp->RefreshDisplay();
}
/*
wp = (WndProperty*)wf->FindByName(_T("prpRange"));
if (wp) {
wp->RefreshDisplay();
wp->set_visible(task.getSettings().AATEnabled &&
task.ValidTaskPoint(task.getActiveIndex() + 1));
wp->GetDataField()->SetAsFloat(Range*100.0);
wp->RefreshDisplay();
}
fixed v1;
if (XCSoarInterface::Calculated().TaskTimeToGo>0) {
v1 = XCSoarInterface::Calculated().TaskDistanceToGo/
XCSoarInterface::Calculated().TaskTimeToGo;
} else {
v1 = 0;
}
*/
wp = (WndProperty*)wf->FindByName(_T("prpSpeedRemaining"));
if (wp) {
wp->GetDataField()->SetAsFloat(Units::ToUserTaskSpeed(
XCSoarInterface::Calculated().task_stats.total.remaining_effective.get_speed()));
wp->GetDataField()->SetUnits(Units::GetTaskSpeedName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpSpeedAchieved"));
if (wp) {
wp->GetDataField()->SetAsFloat(Units::ToUserTaskSpeed(
XCSoarInterface::Calculated().task_stats.total.travelled.get_speed()));
wp->GetDataField()->SetUnits(Units::GetTaskSpeedName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpCruiseEfficiency"));
if (wp) {
wp->GetDataField()->SetAsFloat(cruise_efficiency * 100);
wp->RefreshDisplay();
}
}
static void UpdateValuesSystem() {
static unsigned extGPSCONNECT_last = XCSoarInterface::Basic().Connected;
static int NAVWarning_last = XCSoarInterface::Basic().NAVWarning;
static int SatellitesUsed_last = XCSoarInterface::Basic().SatellitesUsed;
static int VarioAvailable_last = XCSoarInterface::Basic().VarioAvailable;
static int FLARM_Available_last = XCSoarInterface::Basic().FLARM_Available;
static bool LoggerActive_last = logger.isLoggerActive();
static bool DeclaredToDevice_last = logger.isTaskDeclared();
static double SupplyBatteryVoltage_last = XCSoarInterface::Basic().SupplyBatteryVoltage;
static int PDABatteryPercent_last = PDABatteryPercent;
if (first ||
(extGPSCONNECT_last != XCSoarInterface::Basic().Connected) ||
(NAVWarning_last != XCSoarInterface::Basic().NAVWarning) ||
(SatellitesUsed_last != XCSoarInterface::Basic().SatellitesUsed) ||
(VarioAvailable_last != XCSoarInterface::Basic().VarioAvailable) ||
(FLARM_Available_last != XCSoarInterface::Basic().FLARM_Available) ||
(LoggerActive_last != logger.isLoggerActive()) ||
(DeclaredToDevice_last != logger.isTaskDeclared()) ||
(SupplyBatteryVoltage_last != XCSoarInterface::Basic().SupplyBatteryVoltage) ||
(PDABatteryPercent_last != PDABatteryPercent)) {
first = false;
extGPSCONNECT_last = XCSoarInterface::Basic().Connected;
NAVWarning_last = XCSoarInterface::Basic().NAVWarning;
SatellitesUsed_last = XCSoarInterface::Basic().SatellitesUsed;
VarioAvailable_last = XCSoarInterface::Basic().VarioAvailable;
FLARM_Available_last = XCSoarInterface::Basic().FLARM_Available;
LoggerActive_last = logger.isLoggerActive();
DeclaredToDevice_last = logger.isTaskDeclared();
SupplyBatteryVoltage_last = XCSoarInterface::Basic().SupplyBatteryVoltage;
PDABatteryPercent_last = PDABatteryPercent;
} else {
return;
}
TCHAR Temp[80];
TCHAR Temp2[80];
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpGPS"));
if (wp) {
if (XCSoarInterface::Basic().Connected) {
if (XCSoarInterface::Basic().NAVWarning) {
wp->SetText(gettext(TEXT("Fix invalid")));
} else {
if (XCSoarInterface::Basic().SatellitesUsed==0) {
wp->SetText(gettext(TEXT("No fix")));
} else {
wp->SetText(gettext(TEXT("3D fix")));
}
}
wp->RefreshDisplay();
wp = (WndProperty*)wf->FindByName(TEXT("prpNumSat"));
if (wp) {
if (XCSoarInterface::Basic().SatellitesUsed >= 0) { // known numer of sats
_stprintf(Temp,TEXT("%d"),XCSoarInterface::Basic().SatellitesUsed);
} else { // valid but unknown number of sats
_stprintf(Temp,TEXT(">3"));
}
wp->SetText(Temp);
wp->RefreshDisplay();
}
} else {
wp->SetText(gettext(TEXT("Disconnected")));
wp->RefreshDisplay();
}
}
wp = (WndProperty*)wf->FindByName(TEXT("prpVario"));
if (wp) {
if (XCSoarInterface::Basic().VarioAvailable) {
wp->SetText(gettext(TEXT("Connected")));
} else {
wp->SetText(gettext(TEXT("Disconnected")));
}
wp->RefreshDisplay();
}
if (wp) {
wp = (WndProperty*)wf->FindByName(TEXT("prpFLARM"));
if (XCSoarInterface::Basic().FLARM_Available) {
wp->SetText(gettext(TEXT("Connected")));
} else {
wp->SetText(gettext(TEXT("Disconnected")));
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpLogger"));
if (wp) {
logger.LinkGRecordDLL();
if (logger.LoggerGActive()) {
if (logger.isLoggerActive()) {
wp->SetText(gettext(TEXT("ON (G)")));
} else {
wp->SetText(gettext(TEXT("OFF (G)")));
}
}
else { // no G Record
if (logger.isLoggerActive()) {
wp->SetText(gettext(TEXT("ON (no G)")));
} else {
wp->SetText(gettext(TEXT("OFF (no G)")));
}
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpDeclared"));
if (wp) {
if (logger.isTaskDeclared()) {
wp->SetText(gettext(TEXT("YES")));
} else {
wp->SetText(gettext(TEXT("NO")));
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBattery"));
if (wp) {
_stprintf(Temp,TEXT("\0"));
#if !defined(GNAV) && !defined(WINDOWSPC) && !defined(HAVE_POSIX)
_stprintf(Temp2,TEXT("%d%% "), PDABatteryPercent);
_tcscat(Temp, Temp2);
#endif
if (XCSoarInterface::Basic().SupplyBatteryVoltage == 0) {
_stprintf(Temp2,TEXT("\0"));
} else {
_stprintf(Temp2,TEXT("%.1f V"),XCSoarInterface::Basic().SupplyBatteryVoltage);
}
_tcscat(Temp, Temp2);
wp->SetText(Temp);
wp->RefreshDisplay();
}
}
static void OnSaveClicked(WindowControl * Sender, WndListFrame::ListInfo_t *ListInfo){
(void)ListInfo; (void)Sender;
int file_index;
TCHAR task_name[MAX_PATH];
TCHAR file_name[MAX_PATH];
WndProperty* wp;
DataFieldFileReader *dfe;
wp = (WndProperty*)wf->FindByName(TEXT("prpFile"));
if (!wp) return;
dfe = (DataFieldFileReader*)wp->GetDataField();
file_index = dfe->GetAsInteger();
// if (file_index==0) {
if (1) {
// TODO enhancement: suggest a good new name not already in the list
_tcscpy(task_name,TEXT("NEW")); // 091216 era 0
dlgTextEntryShowModal(task_name, 10); // max length
if (_tcslen(task_name)>0) {
_tcscat(task_name, TEXT(LKS_TSK));
#if (!defined(WINDOWSPC) || (WINDOWSPC <=0) )
LocalPath(file_name,TEXT(LKD_TASKS));
_tcscat(file_name,TEXT("\\"));
_tcscat(file_name,task_name); // 091101
#else
SHGetSpecialFolderPath(hWndMainWindow, file_name, CSIDL_PERSONAL, false);
_tcscat(file_name,TEXT("\\"));
_tcscat(file_name,TEXT(XCSDATADIR));
_tcscat(file_name,_T("\\"));
_tcscat(file_name,TEXT(LKD_TASKS)); // 091101
_tcscat(file_name,_T("\\"));
_tcscat(file_name,task_name); // 091101
#endif
dfe->Lookup(file_name);
file_index = dfe->GetAsInteger();
if (file_index==0) {
// good, this file is unique..
dfe->addFile(task_name, file_name);
dfe->Lookup(file_name);
wp->RefreshDisplay();
}
} else {
// TODO code: report error, task not saved since no name was given
return;
}
}
if (file_index>0) {
// file already exists! ask if want to overwrite
_stprintf(file_name, TEXT("%s: '%s'"),
// LKTOKEN _@M696_ = "Task file already exists"
gettext(TEXT("_@M696_")),
dfe->GetAsString());
if(MessageBoxX(hWndMapWindow,
file_name,
// LKTOKEN _@M510_ = "Overwrite?"
gettext(TEXT("_@M510_")),
MB_YESNO|MB_ICONQUESTION) != IDYES) {
return;
}
}
SaveTask(dfe->GetPathFile());
UpdateCaption();
}
static void setVariables(void) {
WndProperty *wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpIP11"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP11);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP12"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP12);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP13"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP13);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP14"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP14);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP15"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP15);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP16"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP16);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP17"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP17);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP21"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP21);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP22"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP22);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP23"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP23);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP24"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP24);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP31"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP31);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP32"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP32);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpIP33"));
if (wp) {
DataFieldBoolean * dfb = (DataFieldBoolean*) wp->GetDataField();
dfb->Set(ConfIP33);
wp->RefreshDisplay();
}
}
static void
FillEnums(void)
{
WndProperty *wp;
wp = (WndProperty*)wf->FindByName(_T("prpBaudRateA"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Auto"));
dfe->addEnumText(_T("4800"));
dfe->addEnumText(_T("9600"));
dfe->addEnumText(_T("19200"));
dfe->addEnumText(_T("38400"));
dfe->addEnumText(_T("57600"));
dfe->addEnumText(_T("115200"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpHasTemperature"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Off"));
dfe->addEnumText(_T("On"));
dfe->addEnumText(_T("AUTO"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneClimbComparisonType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("None"));
dfe->addEnumText(_T("Gross>MacCready"));
dfe->addEnumText(_T("Gross>Average"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneCruiseLiftDetectionType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Disabled"));
dfe->addEnumText(_T("Relative>0"));
dfe->addEnumText(_T("Relative>MacCready/2"));
dfe->addEnumText(_T("Gross>0"));
dfe->addEnumText(_T("Net>MacCready/2"));
dfe->addEnumText(_T("Relative>MacCready"));
dfe->addEnumText(_T("Net>MacCready"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpVarioTimeConstantCircling"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T(" 1.0s"));
dfe->addEnumText(_T(" 1.3s"));
dfe->addEnumText(_T(" 1.8s"));
dfe->addEnumText(_T(" 2.7s"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpVarioTimeConstantCruise"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T(" 1.0s"));
dfe->addEnumText(_T(" 1.3s"));
dfe->addEnumText(_T(" 1.8s"));
dfe->addEnumText(_T(" 2.7s"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneAveragerVarioTimeScale"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T(" 0.0s"));
dfe->addEnumText(_T(" 0.8s"));
dfe->addEnumText(_T(" 1.7s"));
dfe->addEnumText(_T(" 3.5s"));
dfe->addEnumText(_T(" 7.5s"));
dfe->addEnumText(_T("15.0s"));
dfe->addEnumText(_T("30.0s"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneAveragerCruiseTimeScale"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T(" 0.0s"));
dfe->addEnumText(_T(" 0.8s"));
dfe->addEnumText(_T(" 1.7s"));
dfe->addEnumText(_T(" 3.5s"));
dfe->addEnumText(_T(" 7.5s"));
dfe->addEnumText(_T("15.0s"));
dfe->addEnumText(_T("30.0s"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneDeadbandCirclingType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Step"));
dfe->addEnumText(_T("Ramp"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpToneDeadbandCruiseType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Step"));
dfe->addEnumText(_T("Ramp"));
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpFlarmUserInterface"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumTexts(flarm_user_interfaces);
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpFlarmAircraftType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumTexts(flarm_aircraft_types);
dfe->Set(0);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpNeedleGaugeType"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumTexts(needle_gauge_types);
dfe->Set(0);
wp->RefreshDisplay();
}
FillAllAudioEnums();
}
static void SetValues(int indexid) {
//TCHAR *name = 0;
//TCHAR *cn = 0;
WndProperty* wp;
TCHAR buffer[80];
//TCHAR status[10];
//static TCHAR Name[MAXFLARMNAME+1];
//static TCHAR Cn[MAXFLARMCN+1];
int wlen;
if (indexid<0 || indexid>MAXTRAFFIC) {
StartupStore(_T("--- LK setvalues invalid indexid=%d%s"),indexid,NEWLINE);
// DoStatusMessage(_T("ERR-216 INVALID INDEXID"));
return;
}
if ( LKTraffic[indexid].ID <=0 || LKTraffic[indexid].Status <LKT_REAL) {
StartupStore(_T("--- LK setvalues invalid indexid=%d%s"),indexid,NEWLINE);
// DoStatusMessage(_T("ERR-217 INVALID INDEXID"));
return;
}
wp = (WndProperty*)wf->FindByName(TEXT("prpRegName"));
if (wp) {
wlen=wcslen(LKTraffic[indexid].Name);
// a ? probably
if (wlen==1) {
_stprintf(buffer,_T("%06x"),LKTraffic[indexid].ID);
buffer[MAXFLARMNAME]='\0';
} else {
LK_tcsncpy(buffer,LKTraffic[indexid].Name,MAXFLARMNAME);
ConvToUpper(buffer);
}
//name=Name;
wp->SetText(buffer);
wp->RefreshDisplay();
}
#if 0
wp = (WndProperty*)wf->FindByName(TEXT("prpStatus"));
if (wp) {
switch(LKTraffic[indexid].Status) {
case LKT_REAL:
_tcscpy(status,_T("LIVE"));
break;
case LKT_GHOST:
_tcscpy(status,_T("GHOST"));
break;
case LKT_ZOMBIE:
_tcscpy(status,_T("ZOMBIE"));
break;
default:
_tcscpy(status,_T("UNKNOWN"));
break;
}
wp->SetText(status);
wp->RefreshDisplay();
}
#endif
wp = (WndProperty*)wf->FindByName(TEXT("prpCn"));
if (wp) {
if ( _tcslen(LKTraffic[indexid].Cn) == 1 ) {
if (LKTraffic[indexid].Cn[0] == _T('?')) {
_tcscpy(buffer,_T(""));
} else {
LK_tcsncpy(buffer,LKTraffic[indexid].Cn,MAXFLARMCN);
}
} else {
LK_tcsncpy(buffer,LKTraffic[indexid].Cn,MAXFLARMCN);
}
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpDistance"));
if (wp) {
_stprintf(buffer,_T("%.1f %s"),LKTraffic[indexid].Distance*DISTANCEMODIFY, Units::GetDistanceName());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAltitude"));
if (wp) {
_stprintf(buffer,_T("%.0f %s"),LKTraffic[indexid].Altitude*ALTITUDEMODIFY, Units::GetAltitudeName());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAltDiff"));
if (wp) {
// this has to be reverted, because it is a relative altitude to us
_stprintf(buffer,_T("%+.0f %s"),(CALCULATED_INFO.NavAltitude - LKTraffic[indexid].Altitude)*ALTITUDEMODIFY*-1, Units::GetAltitudeName());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpSpeed"));
if (wp) {
_stprintf(buffer,_T("%.0f %s"),LKTraffic[indexid].Speed*SPEEDMODIFY, Units::GetHorizontalSpeedName());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpVario"));
if (wp) {
_stprintf(buffer,_T("%+.1f %s"),LKTraffic[indexid].Average30s*LIFTMODIFY, Units::GetVerticalSpeedName());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBearing"));
if (wp) {
_stprintf(buffer, TEXT(" %d")TEXT(DEG), iround(LKTraffic[indexid].Bearing));
wp->SetText(buffer);
wp->RefreshDisplay();
}
FlarmId* flarmId = file->GetFlarmIdItem(LKTraffic[indexid].ID);
if (flarmId != NULL) {
wp = (WndProperty*)wf->FindByName(TEXT("prpName"));
if (wp) {
_stprintf(buffer,_T("%s"),flarmId->name);
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAirfield"));
if (wp) {
_stprintf(buffer,_T("%s"),flarmId->airfield);
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpType"));
if (wp) {
_stprintf(buffer,_T("%s"),flarmId->type);
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpFreq"));
if (wp) {
_stprintf(buffer,_T("%s"),flarmId->freq);
wp->SetText(buffer);
wp->RefreshDisplay();
}
}
}
static void
Update()
{
WndProperty* wp;
TCHAR Text[100];
Angle teammateBearing = XCSoarInterface::Calculated().TeammateBearing;
double teammateRange = XCSoarInterface::Calculated().TeammateRange;
if (XCSoarInterface::SettingsComputer().TeamCodeRefWaypoint >= 0) {
double Value = (teammateBearing - XCSoarInterface::Basic().TrackBearing).
as_delta().value_degrees();
if (Value > 1)
_stprintf(Text, _T("%2.0f")_T(DEG)_T(">"), Value);
else if (Value < -1)
_stprintf(Text, _T("<%2.0f")_T(DEG), -Value);
else
_tcscpy(Text, _T("<>"));
} else {
_tcscpy(Text, _T("---"));
}
wp = (WndProperty*)wf->FindByName(_T("prpRelBearing"));
if (wp) {
wp->SetText(Text);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpBearing"));
if (wp) {
wp->GetDataField()->SetAsFloat(teammateBearing.value_degrees());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpRange"));
if (wp) {
wp->GetDataField()->SetAsFloat(Units::ToUserDistance(fixed(teammateRange)));
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpOwnCode"));
if (wp) {
_tcsncpy(Text, XCSoarInterface::Calculated().OwnTeamCode, 5);
Text[5] = '\0';
wp->SetText(Text);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpMateCode"));
if (wp) {
wp->SetText(XCSoarInterface::SettingsComputer().TeammateCode);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpFlarmLock"));
if (wp) {
wp->SetText(XCSoarInterface::SettingsComputer().TeamFlarmTracking ?
XCSoarInterface::SettingsComputer().TeamFlarmCNTarget : _T(""));
wp->RefreshDisplay();
}
}
void
InterfaceConfigPanel::Prepare(ContainerWindow &parent, const PixelRect &rc)
{
const UISettings &settings = CommonInterface::GetUISettings();
RowFormWidget::Prepare(parent, rc);
AddInteger(_("Text size"),
nullptr,
_T("%d %%"), _T("%d"), 75, 200, 5,
settings.scale);
AddFile(_("Events"),
_("The Input Events file defines the menu system and how XCSoar responds to "
"button presses and events from external devices."),
ProfileKeys::InputFile, _T("*.xci\0"));
SetExpertRow(InputFile);
#ifndef HAVE_NATIVE_GETTEXT
WndProperty *wp;
wp = AddEnum(_("Language"),
_("The language options selects translations for English texts to other "
"languages. Select English for a native interface or Automatic to localise "
"XCSoar according to the system settings."));
if (wp != nullptr) {
DataFieldEnum &df = *(DataFieldEnum *)wp->GetDataField();
df.addEnumText(_("Automatic"));
df.addEnumText(_T("English"));
#ifdef HAVE_BUILTIN_LANGUAGES
for (const BuiltinLanguage *l = language_table;
l->resource != nullptr; ++l) {
StaticString<100> display_string;
display_string.Format(_T("%s (%s)"), l->name, l->resource);
df.addEnumText(l->resource, display_string);
}
#endif
LanguageFileVisitor lfv(df);
VisitDataFiles(_T("*.mo"), lfv);
df.Sort(2);
auto value_buffer = Profile::GetPath(ProfileKeys::LanguageFile);
Path value = value_buffer;
if (value.IsNull())
value = Path(_T(""));
if (value == Path(_T("none")))
df.Set(1);
else if (!value.IsEmpty() && value != Path(_T("auto"))) {
const Path base = value.GetBase();
if (base != nullptr)
df.Set(base.c_str());
}
wp->RefreshDisplay();
}
#endif /* !HAVE_NATIVE_GETTEXT */
AddTime(_("Menu timeout"),
_("This determines how long menus will appear on screen if the user does not make any button "
"presses or interacts with the computer."),
1, 60, 1, settings.menu_timeout / 2);
SetExpertRow(MenuTimeout);
static constexpr StaticEnumChoice text_input_list[] = {
{ (unsigned)DialogSettings::TextInputStyle::Default, N_("Default") },
{ (unsigned)DialogSettings::TextInputStyle::Keyboard, N_("Keyboard") },
{ (unsigned)DialogSettings::TextInputStyle::HighScore,
N_("HighScore Style") },
{ 0 }
};
AddEnum(_("Text input style"),
_("Determines how the user is prompted for text input (filename, teamcode etc.)"),
text_input_list, (unsigned)settings.dialog.text_input_style);
SetExpertRow(TextInput);
/* on-screen keyboard doesn't work without a pointing device
(mouse or touch screen) */
SetRowVisible(TextInput, HasPointer());
#ifdef HAVE_VIBRATOR
static constexpr StaticEnumChoice haptic_feedback_list[] = {
{ (unsigned)UISettings::HapticFeedback::DEFAULT, N_("OS settings") },
{ (unsigned)UISettings::HapticFeedback::OFF, N_("Off") },
{ (unsigned)UISettings::HapticFeedback::ON, N_("On") },
{ 0 }
};
wp = AddEnum(_("Haptic feedback"),
_("Determines if haptic feedback like vibration is used."),
haptic_feedback_list, (unsigned)settings.haptic_feedback);
SetExpertRow(HapticFeedback);
#endif /* HAVE_VIBRATOR */
}
static void SetValues(bool first=false) {
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFinishLine"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M393_ = "Line"
dfe->addEnumText(gettext(TEXT("_@M393_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
}
dfe->Set(FinishLine);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFinishRadius"));
if (wp) {
wp->GetDataField()->SetAsFloat(lround(FinishRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskStartLine"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M393_ = "Line"
dfe->addEnumText(gettext(TEXT("_@M393_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
}
dfe->SetDetachGUI(true); // disable call to OnAATEnabled
dfe->Set(StartLine);
dfe->SetDetachGUI(false);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskStartRadius"));
if (wp) {
wp->GetDataField()->SetAsFloat(lround(StartRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFAISector"));
if (wp) {
// 110223 CAN ANYONE PLEASE CHECK WHAT THE HACK IS A BOOL FOR BILL GATES? BECAUSE IF FALSE IS -1 THEN
// WE HAVE MANY PROBLEMS! I THINK IT IS TIME TO GO BACK TO bool AND GET RID OF MS BOOLS!!
wp->SetVisible(AATEnabled==0);
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
dfe->addEnumText(gettext(TEXT("DAe 0.5/10")));
}
dfe->SetDetachGUI(true); // disable call to OnAATEnabled
dfe->Set(SectorType);
dfe->SetDetachGUI(false);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskSectorRadius"));
if (wp) {
wp->SetVisible(AATEnabled==0);
wp->GetDataField()->SetAsFloat(lround(SectorRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAutoAdvance"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M418_ = "Manual"
dfe->addEnumText(gettext(TEXT("_@M418_")));
// LKTOKEN _@M897_ "Auto"
dfe->addEnumText(gettext(TEXT("_@M897_")));
// LKTOKEN _@M97_ = "Arm"
dfe->addEnumText(gettext(TEXT("_@M97_")));
// LKTOKEN _@M96_ = "Arm start"
dfe->addEnumText(gettext(TEXT("_@M96_")));
}
dfe->Set(AutoAdvance);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpMinTime"));
if (wp) {
wp->SetVisible(AATEnabled>0 && !ISPARAGLIDER);
wp->GetDataField()->SetAsFloat(AATTaskLength);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpEnableMultipleStartPoints"));
if (wp) {
wp->SetVisible(!ISPARAGLIDER);
wp->GetDataField()->Set(EnableMultipleStartPoints);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAATEnabled"));
if (wp) {
if (ISPARAGLIDER) {
wp->SetVisible(false);
AATEnabled=TRUE;
wp->RefreshDisplay();
} else {
bool aw = (AATEnabled != 0);
wp->GetDataField()->Set(aw);
wp->RefreshDisplay();
}
}
WndButton* wb;
wb = (WndButton *)wf->FindByName(TEXT("EditStartPoints"));
if (wb) {
wb->SetVisible(EnableMultipleStartPoints!=0 && !ISPARAGLIDER);
}
}
void
WindSettingsPanel::Prepare(ContainerWindow &parent, const PixelRect &rc)
{
RowFormWidget::Prepare(parent, rc);
const WindSettings &settings = CommonInterface::GetComputerSettings().wind;
const MapSettings &map_settings = CommonInterface::GetMapSettings();
static constexpr StaticEnumChoice auto_wind_list[] = {
{ AUTOWIND_NONE, N_("Manual"),
N_("When the algorithm is switched off, the pilot is responsible for setting the wind estimate.") },
{ AUTOWIND_CIRCLING, N_("Circling"),
N_("Requires only a GPS source.") },
{ AUTOWIND_ZIGZAG, N_("ZigZag"),
N_("Requires GPS and an intelligent vario with airspeed output.") },
{ AUTOWIND_CIRCLING | AUTOWIND_ZIGZAG, N_("Both"),
N_("Use ZigZag and circling.") },
{ 0 }
};
AddEnum(_("Auto wind"),
_("This allows switching on or off the automatic wind algorithm."),
auto_wind_list, settings.GetLegacyAutoWindMode());
AddBoolean(_("Prefer external wind"),
_("If enabled, then the wind vector received from external devices overrides "
"XCSoar's internal wind calculation."),
settings.use_external_wind,
this);
if (edit_trail_drift)
AddBoolean(_("Trail drift"),
_("Determines whether the snail trail is drifted with the wind "
"when displayed in circling mode. Switched Off, "
"the snail trail stays uncompensated for wind drift."),
map_settings.trail.wind_drift_enabled);
else
AddDummy();
if (edit_manual_wind) {
SpeedVector manual_wind = CommonInterface::Calculated().GetWindOrZero();
AddReadOnly(_("Source"));
WndProperty *wp =
AddFloat(_("Speed"), _("Manual adjustment of wind speed."),
_T("%.0f %s"), _T("%.0f"),
fixed(0),
Units::ToUserWindSpeed(Units::ToSysUnit(fixed(200),
Unit::KILOMETER_PER_HOUR)),
fixed(1), false,
Units::ToUserWindSpeed(manual_wind.norm),
this);
DataFieldFloat &df = *(DataFieldFloat *)wp->GetDataField();
df.SetUnits(Units::GetWindSpeedName());
wp->RefreshDisplay();
wp = AddAngle(_("Direction"), _("Manual adjustment of wind direction."),
manual_wind.bearing, 5u, false,
this);
manual_modified = false;
}
if (clear_manual_button)
AddButton(_("Clear"), *this, CLEAR_MANUAL);
UpdateVector();
}
static void setVariables(void) {
WndProperty *wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyTime"));
if (wp) {
wp->GetDataField()->SetAsFloat(CustomKeyTime);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeLeftUpCorner"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeLeftUpCorner);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeRightUpCorner"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeRightUpCorner);
dfe->Set(CustomKeyModeRightUpCorner);
// if (ISPARAGLIDER) wp->SetReadOnly(true); 2.3q also PGs can use it
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeCenter"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeCenter);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeCenterScreen"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeCenterScreen);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeLeft"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeLeft);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeRight"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeRight);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCustomKeyModeAircraftIcon"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
AddCustomKeyList(dfe);
dfe->Set(CustomKeyModeAircraftIcon);
wp->RefreshDisplay();
}
}
static void
SetValues()
{
LoadFormProperty(*wf, _T("Name"), global_wpt->name.c_str());
LoadFormProperty(*wf, _T("Comment"), global_wpt->comment.c_str());
WndProperty* wp;
bool sign;
unsigned dd,mm,ss;
global_wpt->location.longitude.ToDMS(dd, mm, ss, sign);
wp = (WndProperty*)wf->FindByName(_T("prpLongitudeSign"));
assert(wp != NULL);
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText((_T("W")));
dfe->addEnumText((_T("E")));
dfe->Set(sign);
wp->RefreshDisplay();
LoadFormProperty(*wf, _T("prpLongitudeD"), dd);
switch (CommonInterface::GetUISettings().coordinate_format) {
case CoordinateFormat::DDMMSS: // ("DDMMSS");
case CoordinateFormat::DDMMSS_SS: // ("DDMMSS.ss");
LoadFormProperty(*wf, _T("prpLongitudeM"), mm);
LoadFormProperty(*wf, _T("prpLongitudeS"), ss);
break;
case CoordinateFormat::DDMM_MMM: // ("DDMM.mmm");
LoadFormProperty(*wf, _T("prpLongitudeM"), mm);
LoadFormProperty(*wf, _T("prpLongitudemmm"), 1000 * fixed(ss) / 60);
break;
case CoordinateFormat::DD_DDDD: // ("DD.dddd");
LoadFormProperty(*wf, _T("prpLongitudeDDDD"),
10000 * (fixed)(mm + ss) / 3600);
break;
case CoordinateFormat::UTM:
break;
}
global_wpt->location.latitude.ToDMS(dd, mm, ss, sign);
LoadFormProperty(*wf, _T("prpLatitudeD"), dd);
wp = (WndProperty*)wf->FindByName(_T("prpLatitudeSign"));
assert(wp != NULL);
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText((_T("S")));
dfe->addEnumText((_T("N")));
dfe->Set(sign);
wp->RefreshDisplay();
wp = (WndProperty*)wf->FindByName(_T("prpLatitudeD"));
assert(wp != NULL);
wp->GetDataField()->SetAsInteger(dd);
wp->RefreshDisplay();
switch (CommonInterface::GetUISettings().coordinate_format) {
case CoordinateFormat::DDMMSS: // ("DDMMSS");
case CoordinateFormat::DDMMSS_SS: // ("DDMMSS.ss");
LoadFormProperty(*wf, _T("prpLatitudeM"), mm);
LoadFormProperty(*wf, _T("prpLatitudeS"), ss);
break;
case CoordinateFormat::DDMM_MMM: // ("DDMM.mmm");
LoadFormProperty(*wf, _T("prpLatitudeM"), mm);
LoadFormProperty(*wf, _T("prpLatitudemmm"), 1000 * fixed(ss) / 60);
break;
case CoordinateFormat::DD_DDDD: // ("DD.dddd");
LoadFormProperty(*wf, _T("prpLatitudeDDDD"),
10000 * (fixed)(mm + ss) / 3600);
break;
case CoordinateFormat::UTM:
break;
}
LoadFormProperty(*wf, _T("prpAltitude"), UnitGroup::ALTITUDE, global_wpt->elevation);
wp = (WndProperty*)wf->FindByName(_T("prpFlags"));
assert(wp != NULL);
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Turnpoint"));
dfe->addEnumText(_T("Airport"));
dfe->addEnumText(_T("Landpoint"));
if (global_wpt->IsAirport())
dfe->Set(1u);
else if (global_wpt->IsLandable())
dfe->Set(2u);
else
dfe->Set(0u);
wp->RefreshDisplay();
}
void
TaskDefaultsConfigPanel::Init(WndForm *_wf)
{
assert(_wf != NULL);
wf = _wf;
WndProperty *wp;
const SETTINGS_COMPUTER &settings_computer = XCSoarInterface::SettingsComputer();
OrderedTask* temptask = protected_task_manager->task_blank();
temptask->set_factory(TaskBehaviour::FACTORY_RT);
wp = (WndProperty*)wf->FindByName(_T("prpStartType"));
if (wp) {
const AbstractTaskFactory::LegalPointVector point_types =
temptask->get_factory().getValidStartTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (unsigned i = 0; i < point_types.size(); i++) {
dfe->addEnumText(OrderedTaskPointName(point_types[i]), (unsigned)point_types[i],
OrderedTaskPointDescription(point_types[i]));
if (point_types[i] == settings_computer.sector_defaults.start_type)
dfe->Set((unsigned)point_types[i]);
}
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpStartRadius"), ugDistance,
settings_computer.sector_defaults.start_radius);
wp = (WndProperty*)wf->FindByName(_T("prpFinishType"));
if (wp) {
const AbstractTaskFactory::LegalPointVector point_types =
temptask->get_factory().getValidFinishTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (unsigned i = 0; i < point_types.size(); i++) {
dfe->addEnumText(OrderedTaskPointName(point_types[i]), (unsigned)point_types[i],
OrderedTaskPointDescription(point_types[i]));
if (point_types[i] == settings_computer.sector_defaults.finish_type)
dfe->Set((unsigned)point_types[i]);
}
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpFinishRadius"), ugDistance,
settings_computer.sector_defaults.finish_radius);
wp = (WndProperty*)wf->FindByName(_T("prpTurnpointType"));
if (wp) {
const AbstractTaskFactory::LegalPointVector point_types =
temptask->get_factory().getValidIntermediateTypes();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (unsigned i = 0; i < point_types.size(); i++) {
dfe->addEnumText(OrderedTaskPointName(point_types[i]),
(unsigned)point_types[i],
OrderedTaskPointDescription(point_types[i]));
if (point_types[i] == settings_computer.sector_defaults.turnpoint_type) {
dfe->Set((unsigned)point_types[i]);
}
}
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpTurnpointRadius"), ugDistance,
settings_computer.sector_defaults.turnpoint_radius);
wp = (WndProperty*)wf->FindByName(_T("prpTaskType"));
if (wp) {
const std::vector<TaskBehaviour::Factory_t> factory_types =
temptask->get_factory_types();
DataFieldEnum* dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
for (unsigned i = 0; i < factory_types.size(); i++) {
dfe->addEnumText(OrderedTaskFactoryName(factory_types[i]),
(unsigned)factory_types[i], OrderedTaskFactoryDescription(
factory_types[i]));
if (factory_types[i] == settings_computer.task_type_default)
dfe->Set((unsigned)factory_types[i]);
}
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpAATMinTime"),
(unsigned)(settings_computer.ordered_defaults.aat_min_time / 60));
LoadFormProperty(*wf, _T("prpAATTimeMargin"),
(unsigned)(settings_computer.optimise_targets_margin / 60));
delete temptask;
}
static void SetValues(void) {
WndProperty* wp;
bool sign;
int dd,mm,ss;
Units::LongitudeToDMS(global_wpt->Location.Longitude,
&dd, &mm, &ss, &sign);
wp = (WndProperty*)wf->FindByName(_T("prpLongitudeSign"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText((_T("W")));
dfe->addEnumText((_T("E")));
dfe->Set(sign);
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpLongitudeD"), dd);
switch (Units::GetCoordinateFormat()) {
case 0: // ("DDMMSS");
case 1: // ("DDMMSS.ss");
LoadFormProperty(*wf, _T("prpLongitudeM"), mm);
LoadFormProperty(*wf, _T("prpLongitudeS"), ss);
break;
case 2: // ("DDMM.mmm");
LoadFormProperty(*wf, _T("prpLongitudeM"), mm);
LoadFormProperty(*wf, _T("prpLongitudemmm"), 1000 * fixed(ss) / 60);
break;
case 3: // ("DD.dddd");
LoadFormProperty(*wf, _T("prpLongitudeDDDD"),
10000 * (fixed)(mm + ss) / 3600);
break;
}
Units::LatitudeToDMS(global_wpt->Location.Latitude,
&dd, &mm, &ss, &sign);
LoadFormProperty(*wf, _T("prpLatitudeD"), dd);
wp = (WndProperty*)wf->FindByName(_T("prpLatitudeSign"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText((_T("S")));
dfe->addEnumText((_T("N")));
dfe->Set(sign);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpLatitudeD"));
if (wp) {
wp->GetDataField()->SetAsInteger(dd);
wp->RefreshDisplay();
}
switch (Units::GetCoordinateFormat()) {
case 0: // ("DDMMSS");
case 1: // ("DDMMSS.ss");
LoadFormProperty(*wf, _T("prpLatitudeM"), mm);
LoadFormProperty(*wf, _T("prpLatitudeS"), ss);
break;
case 2: // ("DDMM.mmm");
LoadFormProperty(*wf, _T("prpLatitudeM"), mm);
LoadFormProperty(*wf, _T("prpLatitudemmm"), 1000 * fixed(ss) / 60);
break;
case 3: // ("DD.dddd");
LoadFormProperty(*wf, _T("prpLatitudeDDDD"),
10000 * (fixed)(mm + ss) / 3600);
break;
}
wp = (WndProperty*)wf->FindByName(_T("prpAltitude"));
if (wp) {
wp->GetDataField()->SetAsInteger(iround(
Units::ToUserUnit(global_wpt->Altitude, Units::AltitudeUnit)));
wp->GetDataField()->SetUnits(Units::GetAltitudeName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpFlags"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_T("Turnpoint"));
dfe->addEnumText(_T("Airport"));
dfe->addEnumText(_T("Landpoint"));
if (global_wpt->Flags.Airport) {
dfe->Set(1);
} else if (global_wpt->Flags.LandPoint) {
dfe->Set(2);
} else {
dfe->Set(0);
}
wp->RefreshDisplay();
}
}
short dlgStartupShowModal(void){
WndProperty* wp;
#if TESTBENCH
StartupStore(TEXT(". Startup dialog, RUN_MODE=%d %s"),RUN_MODE,NEWLINE);
#endif
char filename[MAX_PATH];
strcpy(filename,"");
// FLY SIM PROFILE EXIT
if (RUN_MODE==RUN_WELCOME) {
if (!ScreenLandscape) {
LocalPathS(filename, TEXT("dlgFlySim_L.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_FLYSIM_L"));
} else {
LocalPathS(filename, TEXT("dlgFlySim.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_FLYSIM"));
}
if (!wf) {
return 0;
}
}
// PROFILE AIRCRAFT CLOSE
if (RUN_MODE==RUN_DUALPROF) {
if (!ScreenLandscape) {
LocalPathS(filename, TEXT("dlgDualProfile_L.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_DUALPROFILE_L"));
} else {
LocalPathS(filename, TEXT("dlgDualProfile.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_DUALPROFILE"));
}
if (!wf) return 0;
}
// CHOOSE PROFILE
if (RUN_MODE==RUN_PROFILE || RUN_MODE==RUN_AIRCRAFT || RUN_MODE==RUN_PILOT) {
if (!ScreenLandscape) {
LocalPathS(filename, TEXT("dlgStartup_L.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_STARTUP_L"));
} else {
LocalPathS(filename, TEXT("dlgStartup.xml"));
wf = dlgLoadFromXML(CallBackTable, filename, hWndMainWindow, TEXT("IDR_XML_STARTUP"));
}
if (!wf) return 0;
}
wSplash = (WndOwnerDrawFrame*)wf->FindByName(TEXT("frmSplash"));
wSplash->SetWidth(ScreenSizeX);
int PROFWIDTH=0, PROFACCEPTWIDTH=0, PROFHEIGHT=0, PROFSEPARATOR=0;
if (RUN_MODE==RUN_WELCOME) {
((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetOnClickNotify(OnFLYClicked);
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetOnClickNotify(OnSIMClicked);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetOnClickNotify(OnDUALPROFILEClicked);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetOnClickNotify(OnEXITClicked);
if (ScreenLandscape) {
PROFWIDTH=(ScreenSizeX-IBLSCALE(320))/3;
switch(ScreenSize) {
case ss800x480:
case ss400x240:
((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetWidth(IBLSCALE(110));
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetWidth(IBLSCALE(110));
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetLeft(IBLSCALE(208)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetLeft(IBLSCALE(88)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetWidth(IBLSCALE(92)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetLeft(IBLSCALE(161)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetWidth(IBLSCALE(65)+PROFWIDTH/5);
break;
case ss480x272:
((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetWidth(IBLSCALE(117));
((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetWidth(IBLSCALE(117));
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetLeft(IBLSCALE(201)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetLeft(IBLSCALE(88)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetWidth(IBLSCALE(99)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetLeft(IBLSCALE(161)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetWidth(IBLSCALE(65)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetTop(IBLSCALE(197));
break;
case ss640x480:
case ss320x240:
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetLeft(IBLSCALE(93)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetWidth(IBLSCALE(73)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetLeft(IBLSCALE(166)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetWidth(IBLSCALE(60)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetLeft(IBLSCALE(228)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetWidth(IBLSCALE(88));
break;
default:
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetLeft(IBLSCALE(93)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetWidth(IBLSCALE(73)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetLeft(IBLSCALE(166)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetWidth(IBLSCALE(60)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetLeft(IBLSCALE(228)+PROFWIDTH*3);
break;
}
} else {
PROFWIDTH=IBLSCALE(236);
PROFACCEPTWIDTH=NIBLSCALE(45);
PROFHEIGHT=NIBLSCALE(25);
PROFSEPARATOR=NIBLSCALE(2);
}
}
if (RUN_MODE==RUN_DUALPROF) {
((WndButton *)wf->FindByName(TEXT("cmdAIRCRAFT"))) ->SetOnClickNotify(OnAIRCRAFTClicked);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetOnClickNotify(OnPROFILEClicked);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetOnClickNotify(OnPILOTClicked);
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetOnClickNotify(OnCloseClicked);
//((WndButton *)wf->FindByName(TEXT("cmdFLY"))) ->SetOnClickNotify(OnFLYClicked);
//((WndButton *)wf->FindByName(TEXT("cmdSIM"))) ->SetOnClickNotify(OnSIMClicked);
//((WndButton *)wf->FindByName(TEXT("cmdDUALPROFILE"))) ->SetOnClickNotify(OnDUALPROFILEClicked);
//((WndButton *)wf->FindByName(TEXT("cmdEXIT"))) ->SetOnClickNotify(OnEXITClicked);
if (ScreenLandscape) {
PROFWIDTH=(ScreenSizeX-IBLSCALE(320))/3;
switch(ScreenSize) {
case ss800x480:
case ss400x240:
((WndButton *)wf->FindByName(TEXT("cmdAIRCRAFT"))) ->SetWidth(IBLSCALE(110));
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetWidth(IBLSCALE(110));
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetLeft(IBLSCALE(208)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetLeft(IBLSCALE(88)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetWidth(IBLSCALE(92)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetLeft(IBLSCALE(161)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetWidth(IBLSCALE(65)+PROFWIDTH/5);
break;
case ss480x272:
((WndButton *)wf->FindByName(TEXT("cmdAIRCRAFT"))) ->SetWidth(IBLSCALE(117));
((WndButton *)wf->FindByName(TEXT("cmdAIRCRAFT"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdAIRCRAFT"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetWidth(IBLSCALE(117));
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetLeft(IBLSCALE(201)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetLeft(IBLSCALE(88)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetWidth(IBLSCALE(99)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetTop(IBLSCALE(197));
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetLeft(IBLSCALE(161)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetWidth(IBLSCALE(65)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetHeight(IBLSCALE(38));
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetTop(IBLSCALE(197));
break;
case ss640x480:
case ss320x240:
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetLeft(IBLSCALE(93)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetWidth(IBLSCALE(73)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetLeft(IBLSCALE(166)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetWidth(IBLSCALE(60)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetLeft(IBLSCALE(228)+PROFWIDTH*3);
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetWidth(IBLSCALE(88));
break;
default:
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetLeft(IBLSCALE(93)+PROFWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdPROFILE"))) ->SetWidth(IBLSCALE(73)+PROFWIDTH/6);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetLeft(IBLSCALE(166)+PROFWIDTH*2);
((WndButton *)wf->FindByName(TEXT("cmdPILOT"))) ->SetWidth(IBLSCALE(60)+PROFWIDTH/5);
((WndButton *)wf->FindByName(TEXT("cmdCLOSE"))) ->SetLeft(IBLSCALE(228)+PROFWIDTH*3);
break;
}
} else {
PROFWIDTH=IBLSCALE(236);
PROFACCEPTWIDTH=NIBLSCALE(45);
PROFHEIGHT=NIBLSCALE(25);
PROFSEPARATOR=NIBLSCALE(2);
}
}
if (RUN_MODE==RUN_PROFILE || RUN_MODE==RUN_AIRCRAFT || RUN_MODE==RUN_PILOT) {
((WndButton *)wf->FindByName(TEXT("cmdClose"))) ->SetOnClickNotify(OnCloseClicked);
if (ScreenLandscape) {
PROFWIDTH=IBLSCALE(256);
PROFACCEPTWIDTH=NIBLSCALE(60);
PROFHEIGHT=NIBLSCALE(30);
PROFSEPARATOR=NIBLSCALE(4);
((WndButton *)wf->FindByName(TEXT("cmdClose"))) ->SetWidth(PROFACCEPTWIDTH);
((WndButton *)wf->FindByName(TEXT("cmdClose"))) ->
SetLeft((((ScreenSizeX-PROFWIDTH-PROFSEPARATOR-PROFACCEPTWIDTH)/2)+PROFSEPARATOR+PROFWIDTH)-NIBLSCALE(2));
((WndButton *)wf->FindByName(TEXT("cmdClose"))) ->SetHeight(PROFHEIGHT-NIBLSCALE(4));
} else {
PROFWIDTH=IBLSCALE(236);
PROFACCEPTWIDTH=NIBLSCALE(45);
PROFHEIGHT=NIBLSCALE(25);
PROFSEPARATOR=NIBLSCALE(2);
((WndButton *)wf->FindByName(TEXT("cmdClose"))) ->SetWidth(ScreenSizeX-NIBLSCALE(6));
((WndButton *)wf->FindByName(TEXT("cmdClose"))) -> SetLeft(NIBLSCALE(2));
}
}
TCHAR temp[MAX_PATH];
wf->SetHeight(ScreenSizeY);
wf->SetWidth(ScreenSizeX);
wp = ((WndProperty *)wf->FindByName(TEXT("prpProfile")));
if (wp) {
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
if (RUN_MODE==RUN_PROFILE) {
_stprintf(temp,_T("*%S"),LKS_PRF);
dfe->ScanDirectoryTop(_T(LKD_CONF),temp);
dfe->addFile(gettext(_T("_@M1741_")),_T("PROFILE_RESET"));
dfe->Lookup(startProfileFile);
}
if (RUN_MODE==RUN_AIRCRAFT) {
_stprintf(temp,_T("*%S"),LKS_AIRCRAFT);
dfe->ScanDirectoryTop(_T(LKD_CONF),temp);
dfe->Lookup(startAircraftFile);
}
if (RUN_MODE==RUN_PILOT) {
_stprintf(temp,_T("*%S"),LKS_PILOT);
dfe->ScanDirectoryTop(_T(LKD_CONF),temp);
dfe->Lookup(startPilotFile);
}
wp->SetHeight(PROFHEIGHT);
wp->SetWidth(PROFWIDTH);
if (ScreenLandscape)
wp->SetLeft(((ScreenSizeX-PROFWIDTH-PROFSEPARATOR-PROFACCEPTWIDTH)/2)-NIBLSCALE(2));
else
wp->SetLeft(0);
wp->RefreshDisplay();
}
if (!CheckRootDir()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
LocalPath(mydir,_T(""));
_stprintf(mes,_T("%s"),mydir);
MessageBoxX(hWndMainWindow, _T("NO LK8000 DIRECTORY\nCheck Installation!"), _T("FATAL ERROR 000"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("NO LK8000 DIRECTORY"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckDataDir()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
LocalPath(mydir,_T(LKD_SYSTEM));
_stprintf(mes,_T("%s"),mydir);
MessageBoxX(hWndMainWindow, _T("NO SYSTEM DIRECTORY\nCheck Installation!"), _T("FATAL ERROR 001"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("NO SYSTEM DIRECTORY"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckLanguageDir()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
StartupStore(_T("... CHECK LANGUAGE DIRECTORY FAILED!%s"),NEWLINE);
LocalPath(mydir,_T(LKD_LANGUAGE));
_stprintf(mes,_T("%s"),mydir);
MessageBoxX(hWndMainWindow, _T("LANGUAGE DIRECTORY CHECK FAIL\nCheck Language Install"), _T("FATAL ERROR 002"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("NO LANGUAGE DIRECTORY"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckLanguageEngMsg()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
StartupStore(_T("... CHECK LANGUAGE ENG_MSG FAILED!%s"),NEWLINE);
LocalPath(mydir,_T(LKD_LANGUAGE));
_stprintf(mes,_T("%s/ENG_MSG.TXT"),mydir);
MessageBoxX(hWndMainWindow, _T("ENG_MSG.TXT MISSING in LANGUAGE\nCheck Language Install"), _T("FATAL ERROR 012"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("MISSING FILE!"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckSystemDefaultMenu()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
StartupStore(_T("... CHECK SYSTEM DEFAULT_MENU.TXT FAILED!%s"),NEWLINE);
LocalPath(mydir,_T(LKD_SYSTEM));
_stprintf(mes,_T("%s/DEFAULT_MENU.TXT"),mydir);
MessageBoxX(hWndMainWindow, _T("DEFAULT_MENU.TXT MISSING in SYSTEM\nCheck System Install"), _T("FATAL ERROR 022"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("MISSING FILE!"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckSystemBitmaps()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
StartupStore(_T("... CHECK SYSTEM _BITMAPSH FAILED!%s"),NEWLINE);
LocalPath(mydir,_T(LKD_BITMAPS));
_stprintf(mes,_T("%s/_BITMAPSH"),mydir);
MessageBoxX(hWndMainWindow, _T("_BITMAPSH MISSING in SYSTEM Bitmaps\nCheck System Install"), _T("FATAL ERROR 032"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("MISSING FILE!"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
if (!CheckPolarsDir()) {
TCHAR mydir[MAX_PATH];
TCHAR mes[MAX_PATH];
StartupStore(_T("... CHECK POLARS DIRECTORY FAILED!%s"),NEWLINE);
LocalPath(mydir,_T(LKD_POLARS));
_stprintf(mes,_T("%s"),mydir);
MessageBoxX(hWndMainWindow, _T("NO POLARS DIRECTORY\nCheck Install"), _T("FATAL ERROR 003"), MB_OK|MB_ICONQUESTION);
MessageBoxX(hWndMainWindow, mes, _T("NO POLARS DIRECTORY"), MB_OK|MB_ICONQUESTION, true);
RUN_MODE=RUN_EXIT;
Shutdown();
goto _exit;
}
// Standby for a system request to close the application during this phase.
wf->SetTimerNotify(OnTimerNotify);
#if 0
srand(GetTickCount());
#endif
wf->ShowModal();
if (RUN_MODE==RUN_SHUTDOWN) goto _exit;
wp = (WndProperty*)wf->FindByName(TEXT("prpProfile"));
if (wp) {
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
if (RUN_MODE==RUN_PROFILE) {
if (_tcslen(dfe->GetPathFile())>0) {
if (_tcscmp(dfe->GetPathFile(),startProfileFile) ) { // if they are not the same
_tcscpy(startProfileFile,dfe->GetPathFile());
if (_tcscmp(startProfileFile,_T("PROFILE_RESET"))==0) {
#if TESTBENCH
StartupStore(_T("... Selected FULL RESET virtual profile\n"));
#endif
if (MessageBoxX(NULL, gettext(TEXT("_@M1758_")),
gettext(TEXT("_@M1757_")), MB_OK|MB_ICONQUESTION));
fullresetasked=true;
} else {
#if TESTBENCH
StartupStore(_T("... Selected new profile, preloading..\n"));
#endif
LKProfileLoad(startProfileFile);
fullresetasked=false;
}
}
}
}
if (RUN_MODE==RUN_AIRCRAFT) {
if (_tcslen(dfe->GetPathFile())>0) {
if (_tcscmp(dfe->GetPathFile(),startAircraftFile) ) { // if they are not the same
_tcscpy(startAircraftFile,dfe->GetPathFile());
#if TESTBENCH
StartupStore(_T("... Selected new aircraft, preloading..\n"));
#endif
LKProfileLoad(startAircraftFile);
}
}
}
if (RUN_MODE==RUN_PILOT) {
if (_tcslen(dfe->GetPathFile())>0) {
if (_tcscmp(dfe->GetPathFile(),startPilotFile) ) { // if they are not the same
_tcscpy(startPilotFile,dfe->GetPathFile());
#if TESTBENCH
StartupStore(_T("... Selected new pilot, preloading..\n"));
#endif
LKProfileLoad(startPilotFile);
}
}
}
RUN_MODE=RUN_DUALPROF;
}
if (RUN_MODE==RUN_EXIT) {
if (EnableSoundModes) LKSound(_T("LK_SLIDE.WAV"));
if (MessageBoxX(hWndMainWindow,
// LKTOKEN _@M198_ = "Confirm Exit?"
gettext(TEXT("_@M198_")),
TEXT("LK8000"), MB_YESNO|MB_ICONQUESTION) == IDYES) {
Shutdown();
} else
RUN_MODE=RUN_WELCOME;
}
_exit:
if (wf!=NULL) {
delete wf;
wf = NULL;
}
if (RUN_MODE==RUN_FLY || RUN_MODE==RUN_SIM) {
if (EnableSoundModes) LKSound(_T("LK_SLIDE.WAV"));
return 0; // do not repeat dialog
}
if (RUN_MODE==RUN_EXIT || RUN_MODE==RUN_SHUTDOWN)
return -1; // terminate
else
return 1; // repeat dialog
}
void dlgWeatherShowModal(void){
if (!InfoBoxLayout::landscape) {
char filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgWeather_L.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
hWndMainWindow,
TEXT("IDR_XML_WEATHER_L"));
} else {
char filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgWeather.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
hWndMainWindow,
TEXT("IDR_XML_WEATHER"));
}
WndProperty* wp;
if (wf) {
wp = (WndProperty*)wf->FindByName(TEXT("prpTime"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(TEXT("Now"));
for (int i=1; i<MAX_WEATHER_TIMES; i++) {
if (RASP.weather_available[i]) {
TCHAR timetext[10];
_stprintf(timetext,TEXT("%04d"), RASP.IndexToTime(i));
dfe->addEnumText(timetext);
}
}
RASPGetTime(dfe);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpDisplayItem"));
DataFieldEnum* dfe;
if (wp) {
dfe = (DataFieldEnum*)wp->GetDataField();
// LKTOKEN _@M708_ = "Terrain"
dfe->addEnumText(gettext(TEXT("_@M708_")));
TCHAR Buffer[20];
for (int i=1; i<=15; i++) {
RASP.ItemLabel(i, Buffer);
if (_tcslen(Buffer)) {
dfe->addEnumText(Buffer);
}
}
dfe->Set(RasterTerrain::render_weather);
wp->RefreshDisplay();
}
wf->ShowModal();
wp = (WndProperty*)wf->FindByName(TEXT("prpTime"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
RASPSetTime(dfe);
}
wp = (WndProperty*)wf->FindByName(TEXT("prpDisplayItem"));
if (wp) {
RasterTerrain::render_weather =
wp->GetDataField()->GetAsInteger();
}
delete wf;
}
wf = NULL;
}
static void SetValues(bool first=false) {
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFinishLine"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M393_ = "Line"
dfe->addEnumText(gettext(TEXT("_@M393_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
}
dfe->Set(FinishLine);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFinishRadius"));
if (wp) {
wp->GetDataField()->SetAsFloat(lround(FinishRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskStartLine"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M393_ = "Line"
dfe->addEnumText(gettext(TEXT("_@M393_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
}
dfe->SetDetachGUI(true); // disable call to OnAATEnabled
dfe->Set(StartLine);
dfe->SetDetachGUI(false);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskStartRadius"));
if (wp) {
wp->GetDataField()->SetAsFloat(lround(StartRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskFAISector"));
if (wp) {
wp->SetVisible(AATEnabled==0);
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M210_ = "Cylinder"
dfe->addEnumText(gettext(TEXT("_@M210_")));
// LKTOKEN _@M274_ = "FAI Sector"
dfe->addEnumText(gettext(TEXT("_@M274_")));
dfe->addEnumText(gettext(TEXT("DAe 0.5/10")));
}
dfe->SetDetachGUI(true); // disable call to OnAATEnabled
dfe->Set(SectorType);
dfe->SetDetachGUI(false);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTaskSectorRadius"));
if (wp) {
wp->SetVisible(AATEnabled==0);
wp->GetDataField()->SetAsFloat(lround(SectorRadius*DISTANCEMODIFY*DISTANCE_ROUNDING)/DISTANCE_ROUNDING);
wp->GetDataField()->SetUnits(Units::GetDistanceName());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAutoAdvance"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
if (first) {
// LKTOKEN _@M418_ = "Manual"
dfe->addEnumText(gettext(TEXT("_@M418_")));
// LKTOKEN _@M897_ "Auto"
dfe->addEnumText(gettext(TEXT("_@M897_")));
// LKTOKEN _@M97_ = "Arm"
dfe->addEnumText(gettext(TEXT("_@M97_")));
// LKTOKEN _@M96_ = "Arm start"
dfe->addEnumText(gettext(TEXT("_@M96_")));
}
dfe->Set(AutoAdvance);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpMinTime"));
if (wp) {
wp->SetVisible(AATEnabled>0);
wp->GetDataField()->SetAsFloat(AATTaskLength);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpEnableMultipleStartPoints"));
if (wp) {
wp->GetDataField()->Set(EnableMultipleStartPoints);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAATEnabled"));
if (wp) {
bool aw = (AATEnabled != 0);
wp->GetDataField()->Set(aw);
wp->RefreshDisplay();
}
WndButton* wb;
wb = (WndButton *)wf->FindByName(TEXT("EditStartPoints"));
if (wb) {
wb->SetVisible(EnableMultipleStartPoints!=0);
}
}
void
dlgBasicSettingsShowModal()
{
const ComputerSettings &settings = CommonInterface::GetComputerSettings();
glide_polar = settings.glide_polar_task;
wf = LoadDialog(CallBackTable, XCSoarInterface::main_window,
_T("IDR_XML_BASICSETTINGS"));
if (wf == NULL)
return;
changed = false;
wf->SetTimerNotify(OnTimerNotify);
OnTimerNotify(*wf);
SetButtons();
SetBallast();
LoadFormProperty(*wf, _T("prpBugs"), (fixed_one - glide_polar.GetBugs()) * 100);
LoadFormProperty(*wf, _T("prpQNH"), Units::ToUserPressure(settings.pressure.GetHectoPascal()));
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(_T("prpQNH"));
if (wp) {
DataFieldFloat &df = *(DataFieldFloat *)wp->GetDataField();
df.SetMin(Units::ToUserPressure(Units::ToSysUnit(fixed(850), unHectoPascal)));
df.SetMax(Units::ToUserPressure(Units::ToSysUnit(fixed(1300), unHectoPascal)));
df.SetStep(Units::ToUserPressure(Units::ToSysUnit(fixed_one, unHectoPascal)));
df.SetUnits(Units::GetPressureName());
df.SetStep(Units::PressureStep());
df.SetFormat( Units::GetFormatUserPressure());
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpTemperature"));
if (wp) {
DataFieldFloat &df = *(DataFieldFloat *)wp->GetDataField();
df.SetMin(Units::ToUserTemperature(Units::ToSysUnit(fixed(-50), unGradCelcius)));
df.SetMax(Units::ToUserTemperature(Units::ToSysUnit(fixed(60), unGradCelcius)));
df.SetUnits(Units::GetTemperatureName());
df.Set(Units::ToUserTemperature(settings.forecast_temperature));
wp->RefreshDisplay();
}
if (wf->ShowModal() == mrOK) {
ComputerSettings &settings = CommonInterface::SetComputerSettings();
if (changed) {
settings.glide_polar_task = glide_polar;
if (protected_task_manager != NULL)
protected_task_manager->SetGlidePolar(glide_polar);
}
SaveFormProperty(*wf, _T("prpTemperature"),
ugTemperature, settings.forecast_temperature);
}
delete wf;
}
static bool
VegaConfigurationUpdated(const TCHAR *name, bool first, bool setvalue = false,
long ext_setvalue = 0)
{
TCHAR updatename[100];
TCHAR fullname[100];
TCHAR propname[100];
TCHAR requesttext[100];
unsigned updated = 0;
unsigned lvalue = 0;
WndProperty* wp;
#ifdef _WIN32_WCE
if (first)
ProgressGlue::Step();
#endif
_stprintf(updatename, _T("Vega%sUpdated"), name);
_stprintf(fullname, _T("Vega%s"), name);
_stprintf(propname, _T("prp%s"), name);
if (first) {
Profile::Set(updatename, 0);
// we are not ready, haven't received value from vario
// (do request here)
_stprintf(requesttext, _T("PDVSC,R,%s"), name);
VarioWriteNMEA(requesttext);
if (!is_simulator())
Sleep(250);
}
if (setvalue) {
wp = (WndProperty*)wf->FindByName(propname);
if (wp) {
wp->GetDataField()->SetAsInteger((int)ext_setvalue);
wp->RefreshDisplay();
}
_stprintf(requesttext, _T("PDVSC,S,%s,%ld"), name, ext_setvalue);
VarioWriteNMEA(requesttext);
if (!is_simulator())
Sleep(250);
return true;
}
if (!Profile::Get(fullname, lvalue)) {
// vario hasn't set the value in the registry yet,
// so no sensible defaults
return false;
} else {
// hack, fix the -1 (plug and play settings)
if (_tcscmp(name, _T("HasTemperature")) == 0) {
if (lvalue >= 255)
lvalue = 2;
}
if (first) {
// at start, set from last known registry value, this
// helps if variables haven't been modified.
wp = (WndProperty*)wf->FindByName(propname);
if (wp) {
wp->GetDataField()->SetAsInteger(lvalue);
wp->RefreshDisplay();
}
}
}
if (Profile::Get(updatename, updated)) {
if (updated == 1) {
// value is updated externally, so set the property and can proceed
// to editing values
Profile::Set(updatename, 2);
wp = (WndProperty*)wf->FindByName(propname);
if (wp) {
wp->GetDataField()->SetAsInteger(lvalue);
wp->RefreshDisplay();
}
} else if (updated == 2) {
wp = (WndProperty*)wf->FindByName(propname);
if (wp) {
unsigned newval = (wp->GetDataField()->GetAsInteger());
if (newval != lvalue) {
// value has changed
Profile::Set(updatename, 2);
Profile::Set(fullname, lvalue);
changed = true;
// maybe represent all as text?
// note that this code currently won't work for longs
// hack, fix the -1 (plug and play settings)
if (_tcscmp(name, _T("HasTemperature")) == 0) {
if (newval == 2)
newval = 255;
}
_stprintf(requesttext, _T("PDVSC,S,%s,%d"), name, newval);
VarioWriteNMEA(requesttext);
if (!is_simulator())
Sleep(250);
return true;
}
}
}
}
return false;
}
static WndForm* InitStartup(BYTE mode) {
WndForm * pWndForm = dlgLoadFromXML(CallBackTable, ScreenLandscape ? IDR_XML_STARTUP_L : IDR_XML_STARTUP_P);
if(pWndForm) {
WindowControl * pWndClose = pWndForm->FindByName(TEXT("cmdClose"));
WndProperty* pWndProfile = static_cast<WndProperty*>(pWndForm->FindByName(TEXT("prpProfile")));
if (ScreenLandscape) {
const int PROFWIDTH = IBLSCALE(256);
const int PROFACCEPTWIDTH = NIBLSCALE(60);
const int PROFHEIGHT = NIBLSCALE(30);
const int PROFSEPARATOR = NIBLSCALE(4);
if(pWndClose) {
pWndClose->SetWidth(PROFACCEPTWIDTH);
pWndClose->SetLeft((((ScreenSizeX - PROFWIDTH - PROFSEPARATOR - PROFACCEPTWIDTH) / 2) + PROFSEPARATOR + PROFWIDTH) - NIBLSCALE(2));
pWndClose->SetHeight(PROFHEIGHT - NIBLSCALE(4));
}
if(pWndProfile) {
pWndProfile->SetLeft(((ScreenSizeX - PROFWIDTH - PROFSEPARATOR - PROFACCEPTWIDTH) / 2) - NIBLSCALE(2));
pWndProfile->SetHeight(PROFHEIGHT);
pWndProfile->SetWidth(PROFWIDTH);
}
} else {
const int PROFWIDTH = IBLSCALE(236);
const int PROFHEIGHT = NIBLSCALE(25);
int h = ScreenSizeY - IBLSCALE(65); //
if(pWndClose) {
pWndClose->SetWidth(ScreenSizeX - NIBLSCALE(6));
pWndClose->SetLeft(NIBLSCALE(2));
pWndClose->SetTop(h);
}
if(pWndProfile) {
pWndProfile->SetTop(h + IBLSCALE(35));
pWndProfile->SetLeft(0);
pWndProfile->SetHeight(PROFHEIGHT);
pWndProfile->SetWidth(PROFWIDTH);
}
}
//
// File selection shared by PROFILEs choices
//
if (pWndProfile) {
DataFieldFileReader* dfe = static_cast<DataFieldFileReader*>(pWndProfile->GetDataField());
if(dfe) {
if (mode == RUN_PROFILE) {
dfe->ScanDirectoryTop(_T(LKD_CONF), _T("*" LKS_PRF));
dfe->addFile(MsgToken(1741), _T("PROFILE_RESET"));
dfe->Lookup(startProfileFile);
} else if (mode == RUN_AIRCRAFT) {
dfe->ScanDirectoryTop(_T(LKD_CONF), _T("*" LKS_AIRCRAFT));
dfe->Lookup(startAircraftFile);
} else if (mode == RUN_DEVICE) {
dfe->ScanDirectoryTop(_T(LKD_CONF), _T("*" LKS_DEVICE));
dfe->Lookup(startDeviceFile);
} else if (mode == RUN_PILOT) {
dfe->ScanDirectoryTop(_T(LKD_CONF), _T("*" LKS_PILOT));
dfe->Lookup(startPilotFile);
}
}
pWndProfile->RefreshDisplay();
}
}
return pWndForm;
}
static void UpdateValuesSystem() {
static int extGPSCONNECT_last = extGPSCONNECT;
static bool NAVWarning_last = GPS_INFO.NAVWarning;
static int SatellitesUsed_last = GPS_INFO.SatellitesUsed;
static int VarioAvailable_last = GPS_INFO.VarioAvailable;
static int FLARM_Available_last = GPS_INFO.FLARM_Available;
static bool LoggerActive_last = LoggerActive;
static bool DeclaredToDevice_last = DeclaredToDevice;
static double SupplyBatteryVoltage_last = GPS_INFO.SupplyBatteryVoltage;
static int PDABatteryPercent_last = PDABatteryPercent;
static int batterybank_last = GPS_INFO.ExtBatt_Bank;
static double extbatt1_voltage = GPS_INFO.ExtBatt1_Voltage;
static double extbatt2_voltage = GPS_INFO.ExtBatt2_Voltage;
if (first ||
(extGPSCONNECT_last != extGPSCONNECT) ||
(NAVWarning_last != GPS_INFO.NAVWarning) ||
(SatellitesUsed_last != GPS_INFO.SatellitesUsed) ||
(VarioAvailable_last != GPS_INFO.VarioAvailable) ||
(FLARM_Available_last != GPS_INFO.FLARM_Available) ||
(LoggerActive_last != LoggerActive) ||
(DeclaredToDevice_last != DeclaredToDevice) ||
(SupplyBatteryVoltage_last != GPS_INFO.SupplyBatteryVoltage) ||
(batterybank_last != GPS_INFO.ExtBatt_Bank) ||
(extbatt1_voltage != GPS_INFO.ExtBatt1_Voltage) ||
(extbatt2_voltage != GPS_INFO.ExtBatt2_Voltage) ||
(PDABatteryPercent_last != PDABatteryPercent)) {
first = false;
extGPSCONNECT_last = extGPSCONNECT;
NAVWarning_last = GPS_INFO.NAVWarning;
SatellitesUsed_last = GPS_INFO.SatellitesUsed;
VarioAvailable_last = GPS_INFO.VarioAvailable;
FLARM_Available_last = GPS_INFO.FLARM_Available;
LoggerActive_last = LoggerActive;
DeclaredToDevice_last = DeclaredToDevice;
SupplyBatteryVoltage_last = GPS_INFO.SupplyBatteryVoltage;
PDABatteryPercent_last = PDABatteryPercent;
batterybank_last = GPS_INFO.ExtBatt_Bank;
extbatt1_voltage = GPS_INFO.ExtBatt1_Voltage;
extbatt2_voltage = GPS_INFO.ExtBatt2_Voltage;
} else {
return;
}
TCHAR Temp[80];
TCHAR Temp2[80];
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpGPS"));
if (wp) {
if (extGPSCONNECT) {
if (GPS_INFO.NAVWarning) {
// LKTOKEN _@M303_ = "Fix invalid"
wp->SetText(gettext(TEXT("_@M303_")));
} else {
if (GPS_INFO.SatellitesUsed==0) {
// LKTOKEN _@M471_ = "No fix"
wp->SetText(gettext(TEXT("_@M471_")));
} else {
// LKTOKEN _@M31_ = "3D fix"
wp->SetText(gettext(TEXT("_@M31_")));
}
}
wp->RefreshDisplay();
wp = (WndProperty*)wf->FindByName(TEXT("prpNumSat"));
if (wp) {
if (GPS_INFO.SatellitesUsed >= 0) { // known numer of sats
_stprintf(Temp,TEXT("%d"),GPS_INFO.SatellitesUsed);
} else { // valid but unknown number of sats
_stprintf(Temp,TEXT(">3"));
}
if (nmeaParser1.activeGPS==true)
_tcscat(Temp,_T(" (Dev:A)"));
else
_tcscat(Temp,_T(" (Dev:B)"));
wp->SetText(Temp);
wp->RefreshDisplay();
}
} else {
// LKTOKEN _@M240_ = "Disconnected"
wp->SetText(gettext(TEXT("_@M240_")));
wp->RefreshDisplay();
}
}
wp = (WndProperty*)wf->FindByName(TEXT("prpVario"));
if (wp) {
if (GPS_INFO.VarioAvailable) {
// LKTOKEN _@M199_ = "Connected"
wp->SetText(gettext(TEXT("_@M199_")));
} else {
// LKTOKEN _@M240_ = "Disconnected"
wp->SetText(gettext(TEXT("_@M240_")));
}
wp->RefreshDisplay();
}
if (wp) {
wp = (WndProperty*)wf->FindByName(TEXT("prpFLARM"));
if (GPS_INFO.FLARM_Available) {
// LKTOKEN _@M199_ = "Connected"
wp->SetText(gettext(TEXT("_@M199_")));
} else {
// LKTOKEN _@M240_ = "Disconnected"
wp->SetText(gettext(TEXT("_@M240_")));
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpLogger"));
if (wp) {
if (LoggerGActive()) {
if (LoggerActive) {
// LKTOKEN _@M494_ = "ON (G)"
wp->SetText(gettext(TEXT("_@M494_")));
} else {
// LKTOKEN _@M489_ = "OFF (G)"
wp->SetText(gettext(TEXT("_@M489_")));
}
}
else { // no G Record
if (LoggerActive) {
// LKTOKEN _@M495_ = "ON (no G)"
wp->SetText(gettext(TEXT("_@M495_")));
} else {
// LKTOKEN _@M490_ = "OFF (no G)"
wp->SetText(gettext(TEXT("_@M490_")));
}
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpDeclared"));
if (wp) {
if (DeclaredToDevice) {
// LKTOKEN _@M827_ = "Yes"
wp->SetText(gettext(TEXT("_@M827_")));
} else {
wp->SetText(gettext(TEXT("_@M890_"))); // No
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpVersion"));
if (wp) {
TCHAR softversion[100];
#ifndef LKCOMPETITION
wsprintf(softversion,_T("%s.%s"),_T(LKVERSION), _T(LKRELEASE));
#else
wsprintf(softversion,_T("%s.%s Competition"),_T(LKVERSION), _T(LKRELEASE));
#endif
wp->SetText(softversion);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBattBank"));
if (wp) {
_stprintf(Temp,TEXT("%d"),GPS_INFO.ExtBatt_Bank);
wp->SetText(Temp);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBatt1Volt"));
if (wp) {
if (GPS_INFO.ExtBatt1_Voltage>=1000)
_stprintf(Temp,TEXT("%.0f%%"),GPS_INFO.ExtBatt1_Voltage-1000);
else
_stprintf(Temp,TEXT("%.2f V"),GPS_INFO.ExtBatt1_Voltage);
wp->SetText(Temp);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBatt2Volt"));
if (wp) {
if (GPS_INFO.ExtBatt1_Voltage>=1000)
_stprintf(Temp,TEXT("%.0f%%"),GPS_INFO.ExtBatt2_Voltage-1000);
else
_stprintf(Temp,TEXT("%.2f V"),GPS_INFO.ExtBatt2_Voltage);
wp->SetText(Temp);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBattery"));
if (wp) {
_stprintf(Temp,TEXT("\0"));
#if (WINDOWSPC<1)
_stprintf(Temp2,TEXT("%d%% "), PDABatteryPercent);
_tcscat(Temp, Temp2);
#endif
if (GPS_INFO.SupplyBatteryVoltage == 0) {
_stprintf(Temp2,TEXT("\0"));
} else {
_stprintf(Temp2,TEXT("%.1f V"),GPS_INFO.SupplyBatteryVoltage);
}
_tcscat(Temp, Temp2);
wp->SetText(Temp);
wp->RefreshDisplay();
}
}
void
WaypointDisplayConfigPanel::Init(WndForm *_wf)
{
assert(_wf != NULL);
wf = _wf;
WndProperty *wp;
const WaypointRendererSettings &settings =
CommonInterface::SettingsMap().waypoint;
wp = (WndProperty*)wf->FindByName(_T("prpWaypointLabels"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
dfe->addEnumText(_("Full name"), DISPLAYNAME, _("The full name of each waypoint is displayed."));
dfe->addEnumText(_("First word of name"), DISPLAYUNTILSPACE, _("The first word of the waypoint name is displayed."));
dfe->addEnumText(_("First 3 letters"), DISPLAYFIRSTTHREE, _("The first 3 letters of the waypoint name are displayed."));
dfe->addEnumText(_("First 5 letters"), DISPLAYFIRSTFIVE, _("The first 5 letters of the waypoint name are displayed."));
dfe->addEnumText(_("None"), DISPLAYNONE, _("No waypoint name is displayed."));
dfe->Set(settings.display_text_type);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpWaypointArrivalHeightDisplay"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
dfe->addEnumText(_("None"), WP_ARRIVAL_HEIGHT_NONE, _("No arrival height is displayed."));
dfe->addEnumText(_("Straight glide"), WP_ARRIVAL_HEIGHT_GLIDE, _("Straight glide arrival height (no terrain is considered)."));
dfe->addEnumText(_("Terrain avoidance glide"), WP_ARRIVAL_HEIGHT_TERRAIN, _("Arrival height considering terrain avoidance"));
dfe->addEnumText(_("Straight & terrain glide"), WP_ARRIVAL_HEIGHT_GLIDE_AND_TERRAIN, _("Both arrival heights are displayed."));
dfe->Set(settings.arrival_height_display);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpWaypointLabelStyle"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->addEnumText(_("Rounded rectangle"), RoundedBlack);
dfe->addEnumText(_("Outlined"), OutlinedInverted);
dfe->Set(settings.landable_render_mode);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpWaypointLabelSelection"));
if (wp) {
//Determines what waypoint labels are displayed for each waypoint (space permitting):
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
dfe->addEnumText(_("All"), wlsAllWaypoints,
_("All waypoint labels will be displayed."));
dfe->addEnumText(_("Task waypoints & landables"),
wlsTaskAndLandableWaypoints,
_("All waypoints part of a task and all landables will be displayed."));
dfe->addEnumText(_("Task waypoints"), wlsTaskWaypoints,
_("All waypoints part of a task will be displayed."));
dfe->addEnumText(_("None"), wlsNoWaypoints,
_("No waypoint labels will be displayed."));
dfe->Set(settings.label_selection);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(_T("prpAppIndLandable"));
if (wp) {
DataFieldEnum* dfe;
dfe = (DataFieldEnum*)wp->GetDataField();
dfe->EnableItemHelp(true);
dfe->addEnumText(_("Purple circle"), wpLandableWinPilot,
_("Airports and outlanding fields are displayed as purple circles. If the waypoint is reachable a bigger green circle is added behind the purple one. If the waypoint is blocked by a mountain the green circle will be red instead."));
dfe->addEnumText(_("B/W"), wpLandableAltA,
_("Airports and outlanding fields are displayed in white/grey. If the waypoint is reachable the color is changed to green. If the waypoint is blocked by a mountain the color is changed to red instead."));
dfe->addEnumText(_("Traffic lights"), wpLandableAltB,
_("Airports and outlanding fields are displayed in the colors of a traffic light. Green if reachable, Orange if blocked by mountain and red if not reachable at all."));
dfe->Set(settings.landable_style);
wp->RefreshDisplay();
}
LoadFormProperty(*wf, _T("prpAppUseSWLandablesRendering"),
settings.vector_landable_rendering);
LoadFormProperty(*wf, _T("prpAppLandableRenderingScale"),
settings.landable_rendering_scale);
LoadFormProperty(*wf, _T("prpAppScaleRunwayLength"),
settings.scale_runway_length);
UpdateVisibilities();
}
/**
* Refreshes UI based on location of target and current task stats
*/
static void
RefreshCalculator()
{
WndProperty* wp = NULL;
bool nodisplay = false;
bool bAAT;
fixed aatTime;
{
ProtectedTaskManager::Lease lease(*protected_task_manager);
bAAT = lease->HasTarget(target_point);
if (!bAAT) {
nodisplay = true;
IsLocked = false;
} else {
lease->GetTargetRangeRadial(target_point, Range, Radial);
IsLocked = lease->TargetIsLocked(target_point);
}
aatTime = lease->GetOrderedTaskBehaviour().aat_min_time;
}
if (chkbOptimized) {
chkbOptimized->set_visible(bAAT);
chkbOptimized->SetState(!IsLocked);
}
LockCalculatorUI();
wp = (WndProperty*)wf->FindByName(_T("prpRange"));
if (wp) {
DataFieldFloat *df = (DataFieldFloat *)wp->GetDataField();
df->Set(Range * fixed(100));
wp->RefreshDisplay();
wp->set_visible(!nodisplay);
}
wp = (WndProperty*)wf->FindByName(_T("prpRadial"));
if (wp) {
fixed rTemp = Radial;
if (rTemp < fixed(-90))
rTemp += fixed(180);
else if (rTemp > fixed(90))
rTemp -= fixed(180);
DataFieldFloat *df = (DataFieldFloat *)wp->GetDataField();
df->Set(rTemp);
wp->RefreshDisplay();
wp->set_visible(!nodisplay);
}
// update outputs
fixed aattimeEst = XCSoarInterface::Calculated().common_stats.task_time_remaining +
XCSoarInterface::Calculated().common_stats.task_time_elapsed;
ShowOptionalFormControl(*wf, _T("prpAATEst"), !nodisplay);
ShowFormControl(*wf, _T("prpAATDelta"), !nodisplay);
if (!nodisplay) {
LoadOptionalFormProperty(*wf, _T("prpAATEst"), aattimeEst / fixed(60));
LoadFormProperty(*wf, _T("prpAATDelta"), (aattimeEst - aatTime) / 60);
}
const ElementStat &total = CommonInterface::Calculated().task_stats.total;
if (total.remaining_effective.IsDefined())
LoadFormProperty(*wf, _T("prpSpeedRemaining"), UnitGroup::TASK_SPEED,
total.remaining_effective.get_speed());
if (total.travelled.IsDefined())
LoadOptionalFormProperty(*wf, _T("prpSpeedAchieved"), UnitGroup::TASK_SPEED,
total.travelled.get_speed());
}
void dlgTaskOverviewShowModal(int Idx){
UpLimit = 0;
LowLimit = 0;
ItemIndex = Idx; //-1;
showAdvanced = false;
wf = NULL;
if (!ScreenLandscape) {
TCHAR filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgTaskOverview_L.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
TEXT("IDR_XML_TASKOVERVIEW_L"));
} else {
TCHAR filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgTaskOverview.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
TEXT("IDR_XML_TASKOVERVIEW"));
}
if (!wf) return;
WndButton *wb = (WndButton*)wf->FindByName(TEXT("cmdTimegates"));
if (wb) wb->SetVisible(false);
if (ISPARAGLIDER) {
if (PGOptimizeRoute) AATEnabled=true; // force it on
EnableMultipleStartPoints=false;
if (wb) wb->SetVisible(true);
wb = (WndButton*)wf->FindByName(TEXT("cmdDelete"));
if (wb) wb->SetVisible(false);
}
UpdateCaption();
wfAdvanced = ((WndFrame *)wf->FindByName(TEXT("frmAdvanced")));
wTaskList = (WndListFrame*)wf->FindByName(TEXT("frmTaskList"));
wTaskList->SetBorderKind(BORDERLEFT);
wTaskList->SetEnterCallback(OnTaskListEnter);
wTaskList->SetWidth(wf->GetWidth() - wTaskList->GetLeft()-2);
wTaskListEntry = (WndOwnerDrawFrame*)wf->FindByName(TEXT("frmTaskListEntry"));
// ScrollbarWidth is initialised from DrawScrollBar in WindowControls, so it might not be ready here
if ( wTaskList->ScrollbarWidth == -1) {
#if defined (PNA)
#define SHRINKSBFACTOR 1.0 // shrink width factor. Range .1 to 1 where 1 is very "fat"
#else
#define SHRINKSBFACTOR 0.75 // shrink width factor. Range .1 to 1 where 1 is very "fat"
#endif
wTaskList->ScrollbarWidth = (int) (SCROLLBARWIDTH_INITIAL * ScreenDScale * SHRINKSBFACTOR);
}
wTaskListEntry->SetWidth(wTaskList->GetWidth() - wTaskList->ScrollbarWidth - 5);
wTaskListEntry = (WndOwnerDrawFrame*)wf-> FindByName(TEXT("frmTaskListEntry"));
wTaskListEntry->SetCanFocus(true);
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpFile"));
if (wp) {
wp->SetVisible(false);
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
TCHAR suff[10];
_stprintf(suff,_T("*%s"),_T(LKS_TSK));
dfe->ScanDirectoryTop(_T(LKD_TASKS),suff);
#ifdef OLDTASK_COMPAT
_stprintf(suff,_T("*%s"),_T(LKS_OLD_TSK));
dfe->ScanDirectoryTop(_T(LKD_TASKS),suff);
#endif
_stprintf(suff,_T("*%s"),_T(LKS_WP_CUP));
dfe->ScanDirectoryTop(_T(LKD_TASKS),suff);
_stprintf(suff,_T("*%s"),_T(LKS_WP_GPX));
dfe->ScanDirectoryTop(_T(LKD_TASKS),suff);
wp->RefreshDisplay();
}
UpdateFilePointer();
// initialise and turn on the display
OverviewRefreshTask();
UpdateAdvanced();
wTaskList->SetItemIndexPos(Idx);
wTaskList->Redraw();
wTaskListEntry->SetFocus();
wf->ShowModal();
// now retrieve back the properties...
RefreshTask();
delete wf;
wf = NULL;
}
void dlgTaskOverviewShowModal(void){
UpLimit = 0;
LowLimit = 0;
ItemIndex = -1;
showAdvanced = false;
wf = NULL;
if (!InfoBoxLayout::landscape) {
char filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgTaskOverview_L.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
hWndMainWindow,
TEXT("IDR_XML_TASKOVERVIEW_L"));
} else {
char filename[MAX_PATH];
LocalPathS(filename, TEXT("dlgTaskOverview.xml"));
wf = dlgLoadFromXML(CallBackTable,
filename,
hWndMainWindow,
TEXT("IDR_XML_TASKOVERVIEW"));
}
if (!wf) return;
ASSERT(wf!=NULL);
if (ISPARAGLIDER) {
AATEnabled=TRUE;
EnableMultipleStartPoints=false;
}
UpdateCaption();
wfAdvanced = ((WndFrame *)wf->FindByName(TEXT("frmAdvanced")));
ASSERT(wfAdvanced!=NULL);
wTaskList = (WndListFrame*)wf->FindByName(TEXT("frmTaskList"));
ASSERT(wTaskList!=NULL);
wTaskList->SetBorderKind(BORDERLEFT);
wTaskList->SetEnterCallback(OnTaskListEnter);
wTaskListEntry = (WndOwnerDrawFrame*)wf->
FindByName(TEXT("frmTaskListEntry"));
ASSERT(wTaskListEntry!=NULL);
wTaskListEntry->SetCanFocus(true);
// wTaskListEntry->SetWidth(wTaskList->GetWidth() - wTaskList->GetScrollbarWidth() - 5); // patch 091126
WndProperty* wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpFile"));
if (wp) {
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
TCHAR suff[10];
_stprintf(suff,_T("*%S"),LKS_TSK);
dfe->ScanDirectoryTop(_T(LKD_TASKS),suff); // TESTFIX 091101
wp->RefreshDisplay();
}
UpdateFilePointer();
// CALCULATED_INFO.AATTimeToGo
//
// initialise and turn on the display
OverviewRefreshTask();
UpdateAdvanced();
wf->ShowModal();
// now retrieve back the properties...
RefreshTask();
delete wf;
wf = NULL;
}
void dlgStartupShowModal(void){
WndProperty* wp;
StartupStore(TEXT("Startup dialog\n"));
if (!InfoBoxLayout::landscape) {
wf = dlgLoadFromXML(CallBackTable,
TEXT("dlgStartup_L.xml"),
XCSoarInterface::main_window,
TEXT("IDR_XML_STARTUP_L"));
} else {
wf = dlgLoadFromXML(CallBackTable,
TEXT("dlgStartup.xml"),
XCSoarInterface::main_window,
TEXT("IDR_XML_STARTUP"));
}
if (!wf) return;
wSplash = (WndOwnerDrawFrame*)wf->FindByName(TEXT("frmSplash"));
((WndButton *)wf->FindByName(TEXT("cmdClose")))
->SetOnClickNotify(OnCloseClicked);
TCHAR temp[MAX_PATH];
_stprintf(temp,TEXT("XCSoar: Version %s"), XCSoar_Version);
wf->SetCaption(temp);
wp = ((WndProperty *)wf->FindByName(TEXT("prpDisclaimer")));
if (wp)
wp->SetText(TEXT("Pilot assumes complete\r\nresponsibility to operate\r\nthe aircraft safely.\r\nMaintain effective lookout.\r\n"));
wp = ((WndProperty *)wf->FindByName(TEXT("prpProfile")));
if (wp) {
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
if (is_altair())
dfe->ScanDirectoryTop(TEXT("config/*.prf"));
else
dfe->ScanDirectoryTop(TEXT("*.prf"));
dfe->Lookup(startProfileFile);
wp->RefreshDisplay();
if (dfe->GetNumFiles()<=2) {
delete wf;
wf = NULL;
return;
}
}
wf->ShowModal();
wp = (WndProperty*)wf->FindByName(TEXT("prpProfile"));
if (wp) {
DataFieldFileReader* dfe;
dfe = (DataFieldFileReader*)wp->GetDataField();
if (_tcslen(dfe->GetPathFile())>0) {
_tcscpy(startProfileFile,dfe->GetPathFile());
}
}
delete wf;
wf = NULL;
}
static void SetValues(void) {
WndProperty* wp;
WndButton *wb;
TCHAR buffer[80];
TCHAR buffer2[160]; // must contain buffer
int bearing;
int hdist;
int vdist;
bool inside = false;
{
CCriticalSection::CGuard guard(CAirspaceManager::Instance().MutexRef());
CAirspace* airspace = CAirspaceManager::Instance().GetAirspacesForDetails();
if(airspace) {
// Get an object instance copy with actual values
airspace_copy = CAirspaceManager::Instance().GetAirspaceCopy(airspace);
inside = CAirspaceManager::Instance().AirspaceCalculateDistance( airspace, &hdist, &bearing, &vdist);
} else {
// error : CAirspaceManager are closed ?
return;
}
}
if (wf!=NULL) {
TCHAR capbuffer[250];
_stprintf(capbuffer,_T("%s ("),airspace_copy.Name());
if (airspace_copy.Enabled()) {
_tcscat(capbuffer,gettext(TEXT("_@M1643_"))); // ENABLED
} else {
_tcscat(capbuffer,gettext(TEXT("_@M1600_"))); // DISABLED
}
_tcscat(capbuffer,_T(")")); // DISABLED
wf->SetCaption(capbuffer);
}
wp = (WndProperty*)wf->FindByName(TEXT("prpType"));
if (wp) {
if (airspace_copy.Flyzone()) {
_stprintf(buffer,TEXT("%s %s"), CAirspaceManager::Instance().GetAirspaceTypeText(airspace_copy.Type()), gettext(TEXT("FLY")));
/*
if( _tcsnicmp( airspace_copy.Name(), airspace_copy.TypeName() ,_tcslen(airspace_copy.TypeName())) == 0)
_stprintf(buffer,TEXT("%s"),airspace_copy.Name());
else
_stprintf(buffer,TEXT("%s %s"),airspace_copy.TypeName() // fixed strings max. 20
,airspace_copy.Name()); // NAME_SIZE 30 => max. 30 char
*/
} else {
_stprintf(buffer,TEXT("%s %s"), gettext(TEXT("NOFLY")), CAirspaceManager::Instance().GetAirspaceTypeText(airspace_copy.Type()));
}
wp->SetText( buffer );
// wp->SetBackColor( airspace_copy.TypeColor());
// wp->SetForeColor( ContrastTextColor(airspace_copy.TypeColor()));
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpTop"));
if (wp) {
CAirspaceManager::Instance().GetAirspaceAltText(buffer, sizeof(buffer)/sizeof(buffer[0]), airspace_copy.Top());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpBase"));
if (wp) {
CAirspaceManager::Instance().GetAirspaceAltText(buffer, sizeof(buffer)/sizeof(buffer[0]), airspace_copy.Base());
wp->SetText(buffer);
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpRange"));
if (wp) {
Units::FormatUserDistance(abs(hdist), buffer, 20);
if (inside) {
// LKTOKEN _@M359_ = "Inside"
wp->SetCaption(gettext(TEXT("_@M359_")));
}
if (hdist < 0) {
// LKTOKEN _@M1257_ "to leave"
_stprintf(buffer2, TEXT("%s %d%s %s"), buffer, iround(bearing), gettext(_T("_@M2179_")), gettext(TEXT("_@M1257_")));
} else {
// LKTOKEN _@M1258_ "to enter"
_stprintf(buffer2, TEXT("%s %d%s %s"), buffer, iround(bearing), gettext(_T("_@M2179_")), gettext(TEXT("_@M1258_")));
}
wp->SetText(buffer2);
wp->RefreshDisplay();
}
// ONLY for DIAGNOSTICS- ENABLE ALSO XML
#if 0
wp = (WndProperty*)wf->FindByName(TEXT("prpWarnLevel"));
if (wp) {
switch (airspace_copy.WarningLevel()) {
default:
// LKTOKEN _@M765_ "Unknown"
wp->SetText(gettext(TEXT("_@M765_")));
break;
case awNone:
// LKTOKEN _@M479_ "None"
wp->SetText(gettext(TEXT("_@M479_")));
break;
case awYellow:
// LKTOKEN _@M1255_ "YELLOW WARNING"
wp->SetText(gettext(TEXT("_@M1255_")));
break;
case awRed:
// LKTOKEN _@M1256_ "RED WARNING"
wp->SetText(gettext(TEXT("_@M1256_")));
break;
}//sw
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpAckLevel"));
if (wp) {
if (airspace_copy.Enabled()) {
switch (airspace_copy.WarningAckLevel()) {
default:
// LKTOKEN _@M765_ "Unknown"
wp->SetText(gettext(TEXT("_@M765_")));
break;
case awNone:
// LKTOKEN _@M479_ "None"
wp->SetText(gettext(TEXT("_@M479_")));
break;
case awYellow:
// LKTOKEN _@M1267_ "Yellow acknowledged"
wp->SetText(gettext(TEXT("_@M1267_")));
break;
case awRed:
// LKTOKEN _@M1268_ "Red acknowledged"
wp->SetText(gettext(TEXT("_@M1268_")));
break;
}//sw
} else {
// LKTOKEN _@M1269_ "Disabled"
wp->SetText(gettext(TEXT("_@M1269_")));
}
wp->RefreshDisplay();
}
#endif
wb = (WndButton*)wf->FindByName(TEXT("cmdFly"));
if (wb) {
if (airspace_copy.Flyzone()) {
// LKTOKEN _@M1271_ "NOFLY"
wb->SetCaption(gettext(TEXT("_@M1271_")));
} else {
// LKTOKEN _@M1270_ "FLY"
wb->SetCaption(gettext(TEXT("_@M1270_")));
}
wb->Redraw();
}
wb = (WndButton*)wf->FindByName(TEXT("cmdSelect"));
if (wb) {
if (airspace_copy.Selected()) {
wb->SetCaption(gettext(TEXT("_@M1656_"))); // SELECTED!
} else {
wb->SetCaption(gettext(TEXT("_@M1654_"))); // SELECT
}
wb->Redraw();
}
wb = (WndButton*)wf->FindByName(TEXT("cmdAcknowledge"));
if (wb) {
if (airspace_copy.Enabled()) {
// LKTOKEN _@M1283_ "Disable"
wb->SetCaption(gettext(TEXT("_@M1283_")));
} else {
// LKTOKEN _@M1282_ "Enable"
wb->SetCaption(gettext(TEXT("_@M1282_")));
}
wb->Redraw();
}
}
static void setVariables(void) {
WndProperty *wp;
wp = (WndProperty*)wf->FindByName(TEXT("prpCat10"));
if (wp) {
if (HaveZoomTopology(10)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(10));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat20"));
if (wp) {
if (HaveZoomTopology(20)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(20));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat30"));
if (wp) {
if (HaveZoomTopology(30)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(30));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat40"));
if (wp) {
if (HaveZoomTopology(40)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(40));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat50"));
if (wp) {
if (HaveZoomTopology(50)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(50));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat60"));
if (wp) {
if (HaveZoomTopology(60)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(60));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat70"));
if (wp) {
if (HaveZoomTopology(70)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(70));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat80"));
if (wp) {
if (HaveZoomTopology(80)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(80));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat90"));
if (wp) {
if (HaveZoomTopology(90)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(90));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat100"));
if (wp) {
if (HaveZoomTopology(100)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(100));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
wp = (WndProperty*)wf->FindByName(TEXT("prpCat110"));
if (wp) {
if (HaveZoomTopology(110)) {
wp->GetDataField()->SetAsFloat( ReadZoomTopology(110));
} else {
wp->GetDataField()->SetAsFloat( 0 );
wp->SetReadOnly(true);
}
wp->RefreshDisplay();
}
}