/*
* Computes the total distance to be travelled by a paced animation.
*
* Returns the total distance, or returns COMPUTE_DISTANCE_ERROR if
* our values don't support distance computation.
*/
double
nsSMILAnimationFunction::ComputePacedTotalDistance(
const nsSMILValueArray& aValues) const
{
NS_ASSERTION(GetCalcMode() == CALC_PACED,
"Calling paced-specific function, but not in paced mode");
double totalDistance = 0.0;
for (PRUint32 i = 0; i < aValues.Length() - 1; i++) {
double tmpDist;
nsresult rv = aValues[i].ComputeDistance(aValues[i+1], tmpDist);
if (NS_FAILED(rv)) {
return COMPUTE_DISTANCE_ERROR;
}
// Clamp distance value to 0, just in case we have an evil ComputeDistance
// implementation somewhere
NS_ABORT_IF_FALSE(tmpDist >= 0.0f, "distance values must be non-negative");
tmpDist = NS_MAX(tmpDist, 0.0);
totalDistance += tmpDist;
}
return totalDistance;
}
nsresult
nsSMILAnimationFunction::AccumulateResult(const nsSMILValueArray& aValues,
nsSMILValue& aResult)
{
if (!IsToAnimation() && GetAccumulate() && mRepeatIteration) {
const nsSMILValue& lastValue = aValues[aValues.Length() - 1];
// If the target attribute type doesn't support addition, Add will
// fail and we leave aResult untouched.
aResult.Add(lastValue, mRepeatIteration);
}
return NS_OK;
}
bool
SVGMotionSMILAnimationFunction::
GenerateValuesForPathAndPoints(Path* aPath,
bool aIsKeyPoints,
FallibleTArray<double>& aPointDistances,
nsSMILValueArray& aResult)
{
MOZ_ASSERT(aResult.IsEmpty(), "outparam is non-empty");
// If we're using "keyPoints" as our list of input distances, then we need
// to de-normalize from the [0, 1] scale to the [0, totalPathLen] scale.
double distanceMultiplier = aIsKeyPoints ? aPath->ComputeLength() : 1.0;
const uint32_t numPoints = aPointDistances.Length();
for (uint32_t i = 0; i < numPoints; ++i) {
double curDist = aPointDistances[i] * distanceMultiplier;
if (!aResult.AppendElement(
SVGMotionSMILType::ConstructSMILValue(aPath, curDist,
mRotateType, mRotateAngle))) {
return false;
}
}
return true;
}
/*
* Given the simple progress for a paced animation, this method:
* - determines which two elements of the values array we're in between
* (returned as aFrom and aTo)
* - determines where we are between them
* (returned as aIntervalProgress)
*
* Returns NS_OK, or NS_ERROR_FAILURE if our values don't support distance
* computation.
*/
nsresult
nsSMILAnimationFunction::ComputePacedPosition(const nsSMILValueArray& aValues,
double aSimpleProgress,
double& aIntervalProgress,
const nsSMILValue*& aFrom,
const nsSMILValue*& aTo)
{
NS_ASSERTION(0.0f <= aSimpleProgress && aSimpleProgress < 1.0f,
"aSimpleProgress is out of bounds");
NS_ASSERTION(GetCalcMode() == CALC_PACED,
"Calling paced-specific function, but not in paced mode");
NS_ABORT_IF_FALSE(aValues.Length() >= 2, "Unexpected number of values");
// Trivial case: If we have just 2 values, then there's only one interval
// for us to traverse, and our progress across that interval is the exact
// same as our overall progress.
if (aValues.Length() == 2) {
aIntervalProgress = aSimpleProgress;
aFrom = &aValues[0];
aTo = &aValues[1];
return NS_OK;
}
double totalDistance = ComputePacedTotalDistance(aValues);
if (totalDistance == COMPUTE_DISTANCE_ERROR)
return NS_ERROR_FAILURE;
// total distance we should have moved at this point in time.
// (called 'remainingDist' due to how it's used in loop below)
double remainingDist = aSimpleProgress * totalDistance;
// Must be satisfied, because totalDistance is a sum of (non-negative)
// distances, and aSimpleProgress is non-negative
NS_ASSERTION(remainingDist >= 0, "distance values must be non-negative");
// Find where remainingDist puts us in the list of values
// Note: We could optimize this next loop by caching the
// interval-distances in an array, but maybe that's excessive.
for (PRUint32 i = 0; i < aValues.Length() - 1; i++) {
// Note: The following assertion is valid because remainingDist should
// start out non-negative, and this loop never shaves off more than its
// current value.
NS_ASSERTION(remainingDist >= 0, "distance values must be non-negative");
double curIntervalDist;
nsresult rv = aValues[i].ComputeDistance(aValues[i+1], curIntervalDist);
NS_ABORT_IF_FALSE(NS_SUCCEEDED(rv),
"If we got through ComputePacedTotalDistance, we should "
"be able to recompute each sub-distance without errors");
NS_ASSERTION(curIntervalDist >= 0, "distance values must be non-negative");
// Clamp distance value at 0, just in case ComputeDistance is evil.
curIntervalDist = NS_MAX(curIntervalDist, 0.0);
if (remainingDist >= curIntervalDist) {
remainingDist -= curIntervalDist;
} else {
// NOTE: If we get here, then curIntervalDist necessarily is not 0. Why?
// Because this clause is only hit when remainingDist < curIntervalDist,
// and if curIntervalDist were 0, that would mean remainingDist would
// have to be < 0. But that can't happen, because remainingDist (as
// a distance) is non-negative by definition.
NS_ASSERTION(curIntervalDist != 0,
"We should never get here with this set to 0...");
// We found the right spot -- an interpolated position between
// values i and i+1.
aFrom = &aValues[i];
aTo = &aValues[i+1];
aIntervalProgress = remainingDist / curIntervalDist;
return NS_OK;
}
}
NS_NOTREACHED("shouldn't complete loop & get here -- if we do, "
"then aSimpleProgress was probably out of bounds");
return NS_ERROR_FAILURE;
}
nsresult
nsSMILAnimationFunction::InterpolateResult(const nsSMILValueArray& aValues,
nsSMILValue& aResult,
nsSMILValue& aBaseValue)
{
nsresult rv = NS_OK;
const nsSMILTime& dur = mSimpleDuration.GetMillis();
// Sanity Checks
NS_ABORT_IF_FALSE(mSampleTime >= 0.0f, "Sample time should not be negative");
NS_ABORT_IF_FALSE(dur >= 0.0f, "Simple duration should not be negative");
if (mSampleTime >= dur || mSampleTime < 0.0f) {
NS_ERROR("Animation sampled outside interval");
return NS_ERROR_FAILURE;
}
if ((!IsToAnimation() && aValues.Length() < 2) ||
(IsToAnimation() && aValues.Length() != 1)) {
NS_ERROR("Unexpected number of values");
return NS_ERROR_FAILURE;
}
// End Sanity Checks
double fTime = double(mSampleTime);
double fDur = double(dur);
// Get the normalised progress through the simple duration
double simpleProgress = (fDur > 0.0) ? fTime / fDur : 0.0;
// Handle bad keytimes (where first != 0 and/or last != 1)
// See http://brian.sol1.net/svg/range-for-keytimes for more info.
if (HasAttr(nsGkAtoms::keyTimes) &&
GetCalcMode() != CALC_PACED) {
double first = mKeyTimes[0];
if (first > 0.0 && simpleProgress < first) {
if (!IsToAnimation())
aResult = aValues[0];
return rv;
}
double last = mKeyTimes[mKeyTimes.Length() - 1];
if (last < 1.0 && simpleProgress >= last) {
if (IsToAnimation())
aResult = aValues[0];
else
aResult = aValues[aValues.Length() - 1];
return rv;
}
}
if (GetCalcMode() != CALC_DISCRETE) {
// Get the normalised progress between adjacent values
const nsSMILValue* from = nsnull;
const nsSMILValue* to = nsnull;
double intervalProgress;
if (IsToAnimation()) {
from = &aBaseValue;
to = &aValues[0];
if (GetCalcMode() == CALC_PACED) {
// Note: key[Times/Splines/Points] are ignored for calcMode="paced"
intervalProgress = simpleProgress;
} else {
ScaleSimpleProgress(simpleProgress);
intervalProgress = simpleProgress;
ScaleIntervalProgress(intervalProgress, 0, 1);
}
} else {
if (GetCalcMode() == CALC_PACED) {
rv = ComputePacedPosition(aValues, simpleProgress,
intervalProgress, from, to);
// Note: If the above call fails, we'll skip the "from->Interpolate"
// call below, and we'll drop into the CALC_DISCRETE section
// instead. (as the spec says we should, because our failure was
// presumably due to the values being non-additive)
} else { // GetCalcMode() == CALC_LINEAR or GetCalcMode() == CALC_SPLINE
ScaleSimpleProgress(simpleProgress);
PRUint32 index = (PRUint32)floor(simpleProgress *
(aValues.Length() - 1));
from = &aValues[index];
to = &aValues[index + 1];
intervalProgress = simpleProgress * (aValues.Length() - 1) - index;
ScaleIntervalProgress(intervalProgress, index, aValues.Length() - 1);
}
}
if (NS_SUCCEEDED(rv)) {
NS_ABORT_IF_FALSE(from, "NULL from-value during interpolation");
NS_ABORT_IF_FALSE(to, "NULL to-value during interpolation");
NS_ABORT_IF_FALSE(0.0f <= intervalProgress && intervalProgress < 1.0f,
"Interval progress should be in the range [0, 1)");
rv = from->Interpolate(*to, intervalProgress, aResult);
}
}
// Discrete-CalcMode case
// Note: If interpolation failed (isn't supported for this type), the SVG
// spec says to force discrete mode.
if (GetCalcMode() == CALC_DISCRETE || NS_FAILED(rv)) {
if (IsToAnimation()) {
// SMIL 3, 12.6.4: Since a to animation has only 1 value, a discrete to
// animation will simply set the to value for the simple duration.
aResult = aValues[0];
} else {
PRUint32 index = (PRUint32) floor(simpleProgress * (aValues.Length()));
aResult = aValues[index];
}
rv = NS_OK;
}
return rv;
}
nsresult
nsSMILAnimationFunction::InterpolateResult(const nsSMILValueArray& aValues,
nsSMILValue& aResult,
nsSMILValue& aBaseValue)
{
// Sanity check animation values
if ((!IsToAnimation() && aValues.Length() < 2) ||
(IsToAnimation() && aValues.Length() != 1)) {
NS_ERROR("Unexpected number of values");
return NS_ERROR_FAILURE;
}
if (IsToAnimation() && aBaseValue.IsNull()) {
return NS_ERROR_FAILURE;
}
// Get the normalised progress through the simple duration.
//
// If we have an indefinite simple duration, just set the progress to be
// 0 which will give us the expected behaviour of the animation being fixed at
// its starting point.
double simpleProgress = 0.0;
if (mSimpleDuration.IsDefinite()) {
nsSMILTime dur = mSimpleDuration.GetMillis();
MOZ_ASSERT(dur >= 0, "Simple duration should not be negative");
MOZ_ASSERT(mSampleTime >= 0, "Sample time should not be negative");
if (mSampleTime >= dur || mSampleTime < 0) {
NS_ERROR("Animation sampled outside interval");
return NS_ERROR_FAILURE;
}
if (dur > 0) {
simpleProgress = (double)mSampleTime / dur;
} // else leave simpleProgress at 0.0 (e.g. if mSampleTime == dur == 0)
}
nsresult rv = NS_OK;
nsSMILCalcMode calcMode = GetCalcMode();
// Force discrete calcMode for visibility since StyleAnimationValue will
// try to interpolate it using the special clamping behavior defined for
// CSS.
if (nsSMILCSSValueType::PropertyFromValue(aValues[0])
== eCSSProperty_visibility) {
calcMode = CALC_DISCRETE;
}
if (calcMode != CALC_DISCRETE) {
// Get the normalised progress between adjacent values
const nsSMILValue* from = nullptr;
const nsSMILValue* to = nullptr;
// Init to -1 to make sure that if we ever forget to set this, the
// MOZ_ASSERT that tests that intervalProgress is in range will fail.
double intervalProgress = -1.f;
if (IsToAnimation()) {
from = &aBaseValue;
to = &aValues[0];
if (calcMode == CALC_PACED) {
// Note: key[Times/Splines/Points] are ignored for calcMode="paced"
intervalProgress = simpleProgress;
} else {
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, calcMode);
intervalProgress = ScaleIntervalProgress(scaledSimpleProgress, 0);
}
} else if (calcMode == CALC_PACED) {
rv = ComputePacedPosition(aValues, simpleProgress,
intervalProgress, from, to);
// Note: If the above call fails, we'll skip the "from->Interpolate"
// call below, and we'll drop into the CALC_DISCRETE section
// instead. (as the spec says we should, because our failure was
// presumably due to the values being non-additive)
} else { // calcMode == CALC_LINEAR or calcMode == CALC_SPLINE
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, calcMode);
uint32_t index = (uint32_t)floor(scaledSimpleProgress *
(aValues.Length() - 1));
from = &aValues[index];
to = &aValues[index + 1];
intervalProgress =
scaledSimpleProgress * (aValues.Length() - 1) - index;
intervalProgress = ScaleIntervalProgress(intervalProgress, index);
}
if (NS_SUCCEEDED(rv)) {
MOZ_ASSERT(from, "NULL from-value during interpolation");
MOZ_ASSERT(to, "NULL to-value during interpolation");
MOZ_ASSERT(0.0f <= intervalProgress && intervalProgress < 1.0f,
"Interval progress should be in the range [0, 1)");
rv = from->Interpolate(*to, intervalProgress, aResult);
}
}
// Discrete-CalcMode case
// Note: If interpolation failed (isn't supported for this type), the SVG
// spec says to force discrete mode.
if (calcMode == CALC_DISCRETE || NS_FAILED(rv)) {
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, CALC_DISCRETE);
// Floating-point errors can mean that, for example, a sample time of 29s in
// a 100s duration animation gives us a simple progress of 0.28999999999
// instead of the 0.29 we'd expect. Normally this isn't a noticeable
// problem, but when we have sudden jumps in animation values (such as is
// the case here with discrete animation) we can get unexpected results.
//
// To counteract this, before we perform a floor() on the animation
// progress, we add a tiny fudge factor to push us into the correct interval
// in cases where floating-point errors might cause us to fall short.
static const double kFloatingPointFudgeFactor = 1.0e-16;
if (scaledSimpleProgress + kFloatingPointFudgeFactor <= 1.0) {
scaledSimpleProgress += kFloatingPointFudgeFactor;
}
if (IsToAnimation()) {
// We don't follow SMIL 3, 12.6.4, where discrete to animations
// are the same as <set> animations. Instead, we treat it as a
// discrete animation with two values (the underlying value and
// the to="" value), and honor keyTimes="" as well.
uint32_t index = (uint32_t)floor(scaledSimpleProgress * 2);
aResult = index == 0 ? aBaseValue : aValues[0];
} else {
uint32_t index = (uint32_t)floor(scaledSimpleProgress * aValues.Length());
aResult = aValues[index];
}
rv = NS_OK;
}
return rv;
}
nsresult
nsSMILAnimationFunction::InterpolateResult(const nsSMILValueArray& aValues,
nsSMILValue& aResult,
nsSMILValue& aBaseValue)
{
// Sanity check animation values
if ((!IsToAnimation() && aValues.Length() < 2) ||
(IsToAnimation() && aValues.Length() != 1)) {
NS_ERROR("Unexpected number of values");
return NS_ERROR_FAILURE;
}
if (IsToAnimation() && aBaseValue.IsNull()) {
return NS_ERROR_FAILURE;
}
// Get the normalised progress through the simple duration.
//
// If we have an indefinite simple duration, just set the progress to be
// 0 which will give us the expected behaviour of the animation being fixed at
// its starting point.
double simpleProgress = 0.0;
if (mSimpleDuration.IsResolved()) {
nsSMILTime dur = mSimpleDuration.GetMillis();
NS_ABORT_IF_FALSE(dur >= 0, "Simple duration should not be negative");
NS_ABORT_IF_FALSE(mSampleTime >= 0, "Sample time should not be negative");
if (mSampleTime >= dur || mSampleTime < 0) {
NS_ERROR("Animation sampled outside interval");
return NS_ERROR_FAILURE;
}
if (dur > 0) {
simpleProgress = (double)mSampleTime / dur;
} // else leave simpleProgress at 0.0 (e.g. if mSampleTime == dur == 0)
}
nsresult rv = NS_OK;
nsSMILCalcMode calcMode = GetCalcMode();
if (calcMode != CALC_DISCRETE) {
// Get the normalised progress between adjacent values
const nsSMILValue* from = nsnull;
const nsSMILValue* to = nsnull;
// Init to -1 to make sure that if we ever forget to set this, the
// NS_ABORT_IF_FALSE that tests that intervalProgress is in range will fail.
double intervalProgress = -1.f;
if (IsToAnimation()) {
from = &aBaseValue;
to = &aValues[0];
if (calcMode == CALC_PACED) {
// Note: key[Times/Splines/Points] are ignored for calcMode="paced"
intervalProgress = simpleProgress;
} else {
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, calcMode);
intervalProgress = ScaleIntervalProgress(scaledSimpleProgress, 0);
}
} else if (calcMode == CALC_PACED) {
rv = ComputePacedPosition(aValues, simpleProgress,
intervalProgress, from, to);
// Note: If the above call fails, we'll skip the "from->Interpolate"
// call below, and we'll drop into the CALC_DISCRETE section
// instead. (as the spec says we should, because our failure was
// presumably due to the values being non-additive)
} else { // calcMode == CALC_LINEAR or calcMode == CALC_SPLINE
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, calcMode);
PRUint32 index = (PRUint32)floor(scaledSimpleProgress *
(aValues.Length() - 1));
from = &aValues[index];
to = &aValues[index + 1];
intervalProgress =
scaledSimpleProgress * (aValues.Length() - 1) - index;
intervalProgress = ScaleIntervalProgress(intervalProgress, index);
}
if (NS_SUCCEEDED(rv)) {
NS_ABORT_IF_FALSE(from, "NULL from-value during interpolation");
NS_ABORT_IF_FALSE(to, "NULL to-value during interpolation");
NS_ABORT_IF_FALSE(0.0f <= intervalProgress && intervalProgress < 1.0f,
"Interval progress should be in the range [0, 1)");
rv = from->Interpolate(*to, intervalProgress, aResult);
}
}
// Discrete-CalcMode case
// Note: If interpolation failed (isn't supported for this type), the SVG
// spec says to force discrete mode.
if (calcMode == CALC_DISCRETE || NS_FAILED(rv)) {
double scaledSimpleProgress =
ScaleSimpleProgress(simpleProgress, CALC_DISCRETE);
if (IsToAnimation()) {
// We don't follow SMIL 3, 12.6.4, where discrete to animations
// are the same as <set> animations. Instead, we treat it as a
// discrete animation with two values (the underlying value and
// the to="" value), and honor keyTimes="" as well.
PRUint32 index = (PRUint32)floor(scaledSimpleProgress * 2);
aResult = index == 0 ? aBaseValue : aValues[0];
} else {
PRUint32 index = (PRUint32)floor(scaledSimpleProgress * aValues.Length());
aResult = aValues[index];
}
rv = NS_OK;
}
return rv;
}