Esempio n. 1
0
	void line_to__(Glib::ustring& d1,Glib::ustring& d2){
		cr_->line_to(s2f__(d1),s2f__(d2));
	}
Esempio n. 2
0
void
Renderer_Ducks::render_vfunc(
	const Glib::RefPtr<Gdk::Drawable>& drawable,
	const Gdk::Rectangle& /*expose_area*/
)
{
	assert(get_work_area());
	if(!get_work_area())
		return;

	const synfig::Point window_start(get_work_area()->get_window_tl());
	const float pw(get_pw()),ph(get_ph());

	const bool solid_lines(get_work_area()->solid_lines);
	bool alternative = get_work_area()->get_alternative_mode();

	const std::list<etl::handle<Duckmatic::Bezier> >& bezier_list(get_work_area()->bezier_list());
	const std::list<handle<Duckmatic::Stroke> >& stroke_list(get_work_area()->stroke_list());
	Glib::RefPtr<Pango::Layout> layout(Pango::Layout::create(get_work_area()->get_pango_context()));

	Cairo::RefPtr<Cairo::Context> cr = drawable->create_cairo_context();

	cr->save();
	cr->set_line_cap(Cairo::LINE_CAP_BUTT);
	cr->set_line_join(Cairo::LINE_JOIN_MITER);

	// Render the strokes
	for(std::list<handle<Duckmatic::Stroke> >::const_iterator iter=stroke_list.begin();iter!=stroke_list.end();++iter)
	{
		cr->save();

		std::list<synfig::Point>::iterator iter2;
		for(iter2=(*iter)->stroke_data->begin();iter2!=(*iter)->stroke_data->end();++iter2)
		{
			cr->line_to(
				((*iter2)[0]-window_start[0])/pw,
				((*iter2)[1]-window_start[1])/ph
				);
		}

		cr->set_line_width(1.0);
		cr->set_source_rgb(
			colorconv_synfig2gdk((*iter)->color).get_red_p(),
			colorconv_synfig2gdk((*iter)->color).get_green_p(),
			colorconv_synfig2gdk((*iter)->color).get_blue_p()
			);
		cr->stroke();

		cr->restore();
	}



	// Render the beziers
	for(std::list<handle<Duckmatic::Bezier> >::const_iterator iter=bezier_list.begin();iter!=bezier_list.end();++iter)
	{
		Point p1((*iter)->p1->get_trans_point()-window_start);
		Point p2((*iter)->p2->get_trans_point()-window_start);
		Point c1((*iter)->c1->get_trans_point()-window_start);
		Point c2((*iter)->c2->get_trans_point()-window_start);
		p1[0]/=pw;p1[1]/=ph;
		p2[0]/=pw;p2[1]/=ph;
		c1[0]/=pw;c1[1]/=ph;
		c2[0]/=pw;c2[1]/=ph;

		cr->save();

		cr->move_to(p1[0], p1[1]);
		cr->curve_to(c1[0], c1[1], c2[0], c2[1], p2[0], p2[1]);

/*
		if (solid_lines)
		{
			cr->set_source_rgb(0,0,0); // DUCK_COLOR_BEZIER_1
			cr->set_line_width(3.0);
			cr->stroke_preserve();

			cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0); //DUCK_COLOR_BEZIER_2
			cr->set_line_width(1.0);
			cr->stroke();
		}
		else
*/
		{
			//Solid line background
			cr->set_line_width(1.0);
			cr->set_source_rgb(0,0,0); // DUCK_COLOR_BEZIER_1
			cr->stroke_preserve();

			//Dashes
			cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0); //DUCK_COLOR_BEZIER_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();
		}
		cr->restore();
	}


	const DuckList duck_list(get_work_area()->get_duck_list());

	std::list<ScreenDuck> screen_duck_list;
	const float radius((abs(pw)+abs(ph))*4);

	etl::handle<Duck> hover_duck(get_work_area()->find_duck(get_work_area()->get_cursor_pos(),radius, get_work_area()->get_type_mask()));

	// Render the ducks
	for(std::list<handle<Duck> >::const_iterator iter=duck_list.begin();iter!=duck_list.end();++iter)
	{

		// If this type of duck has been masked, then skip it
		if(!(*iter)->get_type() || (!(get_work_area()->get_type_mask() & (*iter)->get_type())))
			continue;

		Point sub_trans_point((*iter)->get_sub_trans_point());
		Point sub_trans_origin((*iter)->get_sub_trans_origin());

		if (App::restrict_radius_ducks &&
			(*iter)->is_radius())
		{
			if (sub_trans_point[0] < sub_trans_origin[0])
				sub_trans_point[0] = sub_trans_origin[0];
			if (sub_trans_point[1] < sub_trans_origin[1])
				sub_trans_point[1] = sub_trans_origin[1];
		}

		Point point((*iter)->get_transform_stack().perform(sub_trans_point));
		Point origin((*iter)->get_transform_stack().perform(sub_trans_origin));

		point[0]=(point[0]-window_start[0])/pw;
		point[1]=(point[1]-window_start[1])/ph;

		bool has_connect = (*iter)->get_tangent()
		                || ((*iter)->get_type()&( Duck::TYPE_ANGLE
		                					   | Duck::TYPE_SKEW
		        		                       | Duck::TYPE_SCALE_X
		        		                       | Duck::TYPE_SCALE_Y ));
		if((*iter)->get_connect_duck())
		{
			has_connect=true;
			origin=(*iter)->get_connect_duck()->get_trans_point();
		}

		origin[0]=(origin[0]-window_start[0])/pw;
		origin[1]=(origin[1]-window_start[1])/ph;

		bool selected(get_work_area()->duck_is_selected(*iter));
		bool hover(*iter==hover_duck || (*iter)->get_hover());

		if(get_work_area()->get_selected_value_node())
		{
			synfigapp::ValueDesc value_desc((*iter)->get_value_desc());
			if (value_desc.is_valid() &&
				((value_desc.is_value_node()		&& get_work_area()->get_selected_value_node() == value_desc.get_value_node()) ||
				 (value_desc.parent_is_value_node()	&& get_work_area()->get_selected_value_node() == value_desc.get_parent_value_node())))
			{
				cr->save();

				cr->rectangle(
					round_to_int(point[0]-5),
					round_to_int(point[1]-5),
					10,
					10
					);

				cr->set_line_width(2.0);
				cr->set_source_rgb(1, 0, 0); //DUCK_COLOR_SELECTED
				cr->stroke();

				cr->restore();
			}

		}

		if((*iter)->get_box_duck())
		{
			Point boxpoint((*iter)->get_box_duck()->get_trans_point());
			boxpoint[0]=(boxpoint[0]-window_start[0])/pw;
			boxpoint[1]=(boxpoint[1]-window_start[1])/ph;
			Point tl(min(point[0],boxpoint[0]),min(point[1],boxpoint[1]));

			cr->save();

			cr->rectangle(
				round_to_int(tl[0]),
				round_to_int(tl[1]),
				round_to_int(abs(boxpoint[0]-point[0])),
				round_to_int(abs(boxpoint[1]-point[1]))
				);

			// Solid white box
			cr->set_line_width(1.0);
			cr->set_source_rgb(1,1,1); //DUCK_COLOR_BOX_1
			cr->stroke_preserve();

			// Dashes
			cr->set_source_rgb(0,0,0); //DUCK_COLOR_BOX_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();

			cr->restore();
		}

		if((*iter)->is_axes_tracks())
		{
			Point pos((*iter)->get_point());
			Point points[] = {
				(*iter)->get_sub_trans_origin(),
				(*iter)->get_sub_trans_point(Point(pos[0],0)),
				(*iter)->get_sub_trans_point(),
				(*iter)->get_sub_trans_point(Point(0,pos[1])),
				(*iter)->get_sub_trans_origin()
			};

			cr->save();

			for(int i = 0; i < 5; i++) {
				Point p((*iter)->get_transform_stack().perform(points[i]));
				Real x = (p[0]-window_start[0])/pw;
				Real y = (p[1]-window_start[1])/ph;
				if (i == 0) cr->move_to(x, y); else cr->line_to(x, y);
			}

			// Solid white box
			cr->set_line_width(1.0);
			cr->set_source_rgb(1,1,1); //DUCK_COLOR_BOX_1
			cr->stroke_preserve();

			// Dashes
			cr->set_source_rgb(0,0,0); //DUCK_COLOR_BOX_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();

			cr->restore();
		}

		ScreenDuck screen_duck;
		screen_duck.pos=point;
		screen_duck.selected=selected;
		screen_duck.hover=hover;
		screen_duck.has_alternative=(*iter)->get_alternative_value_desc().is_valid();

		if(!(*iter)->get_editable(alternative))
			screen_duck.color=(DUCK_COLOR_NOT_EDITABLE);
		else if((*iter)->get_tangent())
			if(0){
				// Tangents have different color depending on the split state (disabled for now)
				//
				// Check if we can reach the canvas and set the time to
				// evaluate the split value accordingly
				synfig::Canvas::Handle canvas_h(get_work_area()->get_canvas());
				synfig::Time time(canvas_h?canvas_h->get_time():synfig::Time(0));
				// Retrieve the split value of the bline point.
				const synfigapp::ValueDesc& v_d((*iter)->get_value_desc());
				synfig::LinkableValueNode::Handle parent;
				if(v_d.parent_is_linkable_value_node())
				{
					parent=v_d.get_parent_value_node();
					bool split;
					synfig::ValueNode::Handle child(parent->get_link("split"));
					if(synfig::ValueNode_Animated::Handle::cast_dynamic(child))
					{
						synfig::ValueNode_Animated::Handle animated_child(synfig::ValueNode_Animated::Handle::cast_dynamic(child));
						split=animated_child->new_waypoint_at_time(time).get_value(time).get(split);
					}
					else if(synfig::ValueNode_Const::Handle::cast_dynamic(child))
					{
						synfig::ValueNode_Const::Handle const_child(synfig::ValueNode_Const::Handle::cast_dynamic(child));
						split=(const_child->get_value()).get(split);
					}
					screen_duck.color=(split? DUCK_COLOR_TANGENT_2 : DUCK_COLOR_TANGENT_1);
				}
				else
					screen_duck.color=DUCK_COLOR_TANGENT_1;
			} else {
				// All tangents are the same color
				screen_duck.color=((*iter)->get_scalar()<0 ? DUCK_COLOR_TANGENT_1 : DUCK_COLOR_TANGENT_1);
			}
		else if((*iter)->get_type()&Duck::TYPE_VERTEX)
			screen_duck.color=DUCK_COLOR_VERTEX;
		else if((*iter)->get_type()&Duck::TYPE_RADIUS)
			screen_duck.color=((*iter)->is_linear() ? DUCK_COLOR_LINEAR : DUCK_COLOR_RADIUS);
		else if((*iter)->get_type()&Duck::TYPE_WIDTH)
			screen_duck.color=DUCK_COLOR_WIDTH;
		else if((*iter)->get_type()&Duck::TYPE_ANGLE)
			screen_duck.color=(DUCK_COLOR_ANGLE);
		else if((*iter)->get_type()&Duck::TYPE_WIDTHPOINT_POSITION)
			screen_duck.color=(DUCK_COLOR_WIDTHPOINT_POSITION);
		else
			screen_duck.color=DUCK_COLOR_OTHER;

		screen_duck_list.push_front(screen_duck);

		if(has_connect)
		{
			cr->save();

			cr->move_to(origin[0], origin[1]);
			cr->line_to(point[0], point[1]);

			if(solid_lines)
			{
				// Outside
				cr->set_line_width(3.0);
				cr->set_source_rgb(0,0,0); //DUCK_COLOR_CONNECT_OUTSIDE
				cr->stroke_preserve();

				// Inside
				cr->set_line_width(1.0);
				cr->set_source_rgb(159.0/255,239.0/255,239.0/255); //DUCK_COLOR_CONNECT_INSIDE
				cr->stroke();
			}
			else
			{
				// White background
				cr->set_line_width(1.0);
				cr->set_source_rgb(0,0,0); //DUCK_COLOR_CONNECT_OUTSIDE
				cr->stroke_preserve();

				// Dashes on top of the background
				cr->set_source_rgb(159.0/255,239.0/255,239.0/255); //DUCK_COLOR_CONNECT_INSIDE
				std::valarray<double> dashes(2);
				dashes[0]=5.0;
				dashes[1]=5.0;
				cr->set_dash(dashes, 0);
				cr->stroke();
			}

			cr->restore();
		}

		if((*iter)->is_radius())
		{
			if (!(*iter)->is_linear())
			{
				const Real mag((point-origin).mag());

				cr->save();

				cr->arc(
					origin[0],
					origin[1],
					mag,
					0,
					M_PI*2
					);

				if(solid_lines)
				{
					cr->set_line_width(3.0);
					cr->set_source_rgb(0,0,0);
					cr->stroke_preserve();

					cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0);
				}
				else
				{
					cr->set_source_rgb(1.0,1.0,1.0);

					// Operator difference was added in Cairo 1.9.4
					// It currently isn't supported by Cairomm
	#if CAIRO_VERSION >= 10904
					cairo_set_operator(cr->cobj(), CAIRO_OPERATOR_DIFFERENCE);
	#else
					// Fallback: set color to black
					cr->set_source_rgb(0,0,0);
	#endif

				}

				cr->set_line_width(1.0);
				cr->stroke();

				cr->restore();
			}

			if(hover)
			{
				Real mag;
				if ((*iter)->get_exponential()){
					mag = log((*iter)->get_point().mag());
				}
				else if (App::restrict_radius_ducks)
				{
					Point sub_trans_point((*iter)->get_sub_trans_point());
					Point sub_trans_origin((*iter)->get_sub_trans_origin());

					if (sub_trans_point[0] < sub_trans_origin[0])
						sub_trans_point[0] = sub_trans_origin[0];
					if (sub_trans_point[1] < sub_trans_origin[1])
						sub_trans_point[1] = sub_trans_origin[1];

					Point point((*iter)->get_transform_stack().perform(sub_trans_point));
					Point origin((*iter)->get_transform_stack().perform(sub_trans_origin));

					mag = (point-origin).mag();
				}
				else
					mag = ((*iter)->get_trans_point()-(*iter)->get_trans_origin()).mag();

				Distance real_mag(mag, Distance::SYSTEM_UNITS);
				if (!(*iter)->get_exponential())
					real_mag.convert(App::distance_system,get_work_area()->get_rend_desc());

				cr->save();

				layout->set_text(real_mag.get_string());

				cr->set_source_rgb(0,0,0); // DUCK_COLOR_WIDTH_TEXT_1
				cr->move_to(
					point[0]+1+6,
					point[1]+1-8
					);
				layout->show_in_cairo_context(cr);
				cr->stroke();


				cr->set_source_rgb(1,0,1); // DUCK_COLOR_WIDTH_TEXT_2
				cr->move_to(
					point[0]+6,
					point[1]-8
					);
				layout->show_in_cairo_context(cr);
				cr->stroke();

				cr->restore();
			}

		}

		if((*iter)->get_type()&&Duck::TYPE_WIDTHPOINT_POSITION)
		{
			if(hover)
			{
				synfig::Canvas::Handle canvas_h(get_work_area()->get_canvas());
				synfig::Time time(canvas_h?canvas_h->get_time():synfig::Time(0));
				synfigapp::ValueDesc value_desc((*iter)->get_value_desc());
				synfig::ValueNode_WPList::Handle wplist=NULL;
				ValueNode_Composite::Handle wpoint_composite=NULL;
				Real radius=0.0;
				Real new_value;
				Point p(sub_trans_point-sub_trans_origin);
				if(value_desc.parent_is_value_node())
					wplist=synfig::ValueNode_WPList::Handle::cast_dynamic(value_desc.get_parent_value_node());
				if(wplist)
				{
					bool wplistloop(wplist->get_loop());
					synfig::ValueNode_BLine::Handle bline(synfig::ValueNode_BLine::Handle::cast_dynamic(wplist->get_bline()));
					wpoint_composite=ValueNode_Composite::Handle::cast_dynamic(value_desc.get_value_node());
					if(bline && wpoint_composite)
					{
						bool blineloop(bline->get_loop());
						bool homogeneous=false;
						// Retrieve the homogeneous layer parameter
						std::set<Node*>::iterator iter;
						for(iter=wplist->parent_set.begin();iter!=wplist->parent_set.end();++iter)
							{
								Layer::Handle layer;
								layer=Layer::Handle::cast_dynamic(*iter);
								if(layer && layer->get_name() == "advanced_outline")
								{
									homogeneous=layer->get_param("homogeneous").get(bool());
									break;
								}
							}
						WidthPoint wp((*wpoint_composite)(time).get(WidthPoint()));
						if(wplistloop)
						{
							// The wplist is looped. This may require a position parameter
							// outside the range of 0-1, so make sure that the position doesn't
							// change drastically.
							// First normalise the current position
							Real value_old(wp.get_norm_position(wplistloop));
							Real value_old_b(wp.get_bound_position(wplistloop));
							// If it is homogeneous then convert it to standard
							value_old=homogeneous?hom_to_std((*bline)(time), value_old, wplistloop, blineloop):value_old;
							// grab a new position given by duck's position on the bline
							Real value_new = synfig::find_closest_point((*bline)(time), p , radius, blineloop);
							// calculate the difference between old and new positions
							Real difference = fmod( fmod(value_new - value_old, 1.0) + 1.0 , 1.0);
							//fmod is called twice to avoid negative values
							if (difference > 0.5)
								difference=difference-1.0;
							// calculate a new value for the position
							new_value=value_old+difference;
							// restore the homogeneous value if needed
							new_value = homogeneous?std_to_hom((*bline)(time), new_value, wplistloop, blineloop):new_value;
							// this is the difference between the new value and the old value inside the boundaries
							Real bound_diff((wp.get_lower_bound() + new_value*(wp.get_upper_bound()-wp.get_lower_bound()))-value_old_b);
							// add the new diff to the current value
							new_value = wp.get_position() + bound_diff;
						}
						else
						{
							// grab a new position given by duck's position on the bline
							new_value = synfig::find_closest_point((*bline)(time), p , radius, blineloop);
							// if it is homogeneous then convert to it
							new_value=homogeneous?std_to_hom((*bline)(time), new_value, wplistloop, blineloop):new_value;
							// convert the value inside the boundaries
							new_value = wp.get_lower_bound()+new_value*(wp.get_upper_bound()-wp.get_lower_bound());
						}
						cr->save();
						layout->set_text(strprintf("%2.3f", new_value));

						cr->set_source_rgb(0,0,0); // DUCK_COLOR_WIDTH_TEXT_1
						cr->move_to(
							point[0]+1+6,
							point[1]+1-18
							);
						layout->show_in_cairo_context(cr);
						cr->stroke();


						cr->set_source_rgb(1,0,1); // DUCK_COLOR_WIDTH_TEXT_2
						cr->move_to(
							point[0]+6,
							point[1]-18
							);
						layout->show_in_cairo_context(cr);
						cr->stroke();

						cr->restore();
					}
				}
			}
		}

	}

	for(;screen_duck_list.size();screen_duck_list.pop_front())
	{
		Gdk::Color color(screen_duck_list.front().color);
		double radius = 4;
		double outline = 1;
		bool duck_alternative = alternative && screen_duck_list.front().has_alternative;

		// Draw the hovered duck last (on top of everything)
		if(screen_duck_list.front().hover && !screen_duck_list.back().hover && screen_duck_list.size()>1)
		{
			screen_duck_list.push_back(screen_duck_list.front());
			continue;
		}

		cr->save();

		if(!screen_duck_list.front().selected)
		{
			color.set_red(color.get_red()*2/3);
			color.set_green(color.get_green()*2/3);
			color.set_blue(color.get_blue()*2/3);
		}

		if(screen_duck_list.front().hover)
		{
			radius += 1;
			outline += 1;
		}

		cr->arc(
			screen_duck_list.front().pos[0],
			screen_duck_list.front().pos[1],
			radius,
			0,
			M_PI*2
			);

		cr->set_source_rgba(
			color.get_red_p(),
			color.get_green_p(),
			color.get_blue_p(),
			duck_alternative ? 0.5 : 1.0
			);
		cr->fill_preserve();

		cr->set_line_width(outline);
		cr->set_source_rgba(0,0,0,1); //DUCK_COLOR_OUTLINE
		cr->stroke();

		cr->restore();
	}
}
Esempio n. 3
0
static void
draw_text (Cairo::RefPtr<Cairo::Context> cr, int wdh, int hgt)
{
    RefPtr<Pango::Layout> layout = Pango::Layout::create(cr);
    //layout->set_single_paragraph_mode(true);
    layout->set_text("MTextTextM\nAbc\nff");


    Pango::FontDescription dsc(FONT);
    layout->set_font_description(dsc);

    int t_wdh, t_hgt;
    layout->get_size(t_wdh, t_hgt);

    double t_sz = (double)dsc.get_size()/t_wdh;
    double new_sz = wdh * t_sz ;

    io::cout << "new_sz " << new_sz << io::endl;
    io::cout << "wdh " << wdh << io::endl;

    dsc.set_size( int(new_sz*PANGO_SCALE) );
    layout->set_font_description(dsc);

    layout->get_size(t_wdh, t_hgt);
    io::cout << "t_wdh " << t_wdh/(double)PANGO_SCALE << io::endl;

    // для наглядности
    cr->set_line_width(1.0);
    cr->rectangle(0, 0, wdh, hgt);
    cr->stroke();


    cr->save();

    cr->move_to(0, 0);
    cr->scale( 1.0, hgt / ((double)t_hgt/PANGO_SCALE) );
    //cr->scale( wdh / ((double)t_wdh/PANGO_SCALE), hgt / ((double)t_hgt/PANGO_SCALE) );

    layout->update_from_cairo_context(cr);

    pango_cairo_show_layout(cr->cobj(), layout->gobj());

    {
        Pango::Rectangle w_rct, s_rct;
        int cur_pos;

        cur_pos = 1;
        layout->get_cursor_pos(cur_pos, w_rct, s_rct);
        pango_extents_to_pixels(0, w_rct.gobj());

        io::cout << "curs - x, y, hgt " << w_rct.get_x() << " " << w_rct.get_y() << " " << w_rct.get_height() << io::endl;
        cr->move_to(w_rct.get_x()+5, w_rct.get_y());
        cr->line_to(w_rct.get_x()+5, w_rct.get_y()+w_rct.get_height());
        cr->stroke();


        cur_pos = 11;
        layout->get_cursor_pos(cur_pos, w_rct, s_rct);
        pango_extents_to_pixels(0, w_rct.gobj());

        io::cout << "curs - x, y, hgt " << w_rct.get_x() << " " << w_rct.get_y() << " " << w_rct.get_height() << io::endl;
        cr->move_to(w_rct.get_x()+5, w_rct.get_y());
        cr->line_to(w_rct.get_x()+5, w_rct.get_y()+w_rct.get_height());
        cr->stroke();

    }


    cr->restore();
}
Esempio n. 4
0
void area___::test__(){
	int width, height;
	width=da_->get_allocation().get_width();
	height=da_->get_allocation().get_height();

	double m_radius=0.42;
	double m_line_width=0.05;

	// scale to unit square and translate (0, 0) to be (0.5, 0.5), i.e.
	// the center of the window
	cr_->scale(width, height);
	cr_->translate(0.5, 0.5);
	cr_->set_line_width(m_line_width);

	cr_->save();
	cr_->set_source_rgba(0.337, 0.612, 0.117, 0.9);   // green
	cr_->paint();
	cr_->restore();
	cr_->arc(0, 0, m_radius, 0, 2 * M_PI);
	cr_->save();
	cr_->set_source_rgba(1.0, 1.0, 1.0, 0.8);
	cr_->fill_preserve();
	cr_->restore();
	cr_->stroke_preserve();
	cr_->clip();

	//clock ticks
	for (int i = 0; i < 12; i++)
	{
		double inset = 0.05;

		cr_->save();
		cr_->set_line_cap(Cairo::LINE_CAP_ROUND);

		if(i % 3 != 0)
		{
			inset *= 0.8;
			cr_->set_line_width(0.03);
		}

		cr_->move_to(
				(m_radius - inset) * cos (i * M_PI / 6),
				(m_radius - inset) * sin (i * M_PI / 6));
		cr_->line_to (
				m_radius * cos (i * M_PI / 6),
				m_radius * sin (i * M_PI / 6));
		cr_->stroke();
		cr_->restore(); // stack-pen-size
	}

	// store the current time
	time_t rawtime;
	time(&rawtime);
	struct tm * timeinfo = localtime (&rawtime);

	// compute the angles of the indicators of our clock
	double minutes = timeinfo->tm_min * M_PI / 30;
	double hours = timeinfo->tm_hour * M_PI / 6;
	double seconds= timeinfo->tm_sec * M_PI / 30;
	cout<<timeinfo->tm_min<<","<<timeinfo->tm_hour<<","<<timeinfo->tm_sec<<endl;

	cr_->save();
	cr_->set_line_cap(Cairo::LINE_CAP_ROUND);

	// draw the seconds hand
	cr_->save();
	cr_->set_line_width(m_line_width / 3);
	cr_->set_source_rgba(0.7, 0.7, 0.7, 0.8); // gray
	cr_->move_to(0, 0);
	cr_->line_to(sin(seconds) * (m_radius * 0.9),
			-cos(seconds) * (m_radius * 0.9));
	cr_->stroke();
	cr_->restore();

	// draw the minutes hand
	cr_->set_source_rgba(0.117, 0.337, 0.612, 0.9);   // blue
	cr_->move_to(0, 0);
	cr_->line_to(sin(minutes + seconds / 60) * (m_radius * 0.8),
			-cos(minutes + seconds / 60) * (m_radius * 0.8));
	cr_->stroke();

	// draw the hours hand
	cr_->set_source_rgba(0.337, 0.612, 0.117, 0.9);   // green
	cr_->move_to(0, 0);
	cr_->line_to(sin(hours + minutes / 12.0) * (m_radius * 0.5),
			-cos(hours + minutes / 12.0) * (m_radius * 0.5));
	cr_->stroke();
	cr_->restore();

	// draw a little dot in the middle
	cr_->arc(0, 0, m_line_width / 3.0, 0, 2 * M_PI);
	cr_->fill();
}
Esempio n. 5
0
int render_png(Graph* graph)
{
	int i_side = (graph->side_length - 1) * SPACING + PADDING;

	//Cairo ImageSurface. This one will be saved afterwards as a png file
	Cairo::RefPtr<Cairo::ImageSurface> surface = Cairo::ImageSurface::create(Cairo::FORMAT_ARGB32, i_side + PADDING * 2, i_side + PADDING * 2);
	//Cairo Context.
	Cairo::RefPtr<Cairo::Context> cr = Cairo::Context::create(surface);

	cr->save(); // save the state of the context
	cr->set_source_rgb(1.0, 1.0, 1.0);
	cr->paint(); // fill image with the color
	cr->restore(); // color is back to black now

	//Storing state to start drawing
	cr->save();

	//setting brush color to black
	cr->set_source_rgb(0.0, 0.0, 0.0);

	cr->set_line_width(1.0);

	//drawing lines
	for (int i = 0; i < graph->side_length; i++) {
		for (int j = 0; j < graph->side_length; j++) {
			//for a current node
			Node* current = graph->matrix.at(i).at(j);
			//find all friends
			for (int k = 0; k < current->friends.size(); k++) {
				pair<int, int> current_friend = *std::next(current->friends.begin(), k);
				//Move brush to current node
				cr->move_to(current->coors.first * SPACING + PADDING, current->coors.second * SPACING + PADDING);
				//Draw a line to current friend
				cr->line_to(current_friend.first * SPACING + PADDING, current_friend.second * SPACING + PADDING);
				cr->stroke();
			}
		}
	}

	//setting brush color to red
	cr->set_source_rgb(1.0, 0.0, 0.0);

	//drawing vertices after lines are drawn
	for (int i = 0; i < graph->side_length; i++) {
		for (int j = 0; j < graph->side_length; j++) {
			Node* current = graph->matrix.at(i).at(j);
			cr->arc(current->coors.first * SPACING + PADDING, current->coors.second * SPACING + PADDING, 1.0, 0.0, 2.0 * M_PI);
			cr->stroke();
		}
	}

	cr->restore();

#ifdef CAIRO_HAS_PNG_FUNCTIONS

	std::string filename = build_name("result");
	surface->write_to_png(filename);

	std::cout << "Wrote png file \"" << filename << "\"" << std::endl;

#else

	std::cout << "You must compile cairo with PNG support for this example to work."
	          << std::endl;

#endif
}
bool SamplerWidget::on_expose_event(GdkEventExpose* event)
{
	// This is where we draw on the window
	Glib::RefPtr<Gdk::Window> window = get_window();
	
	if(window)    // Only run if Window does exist
	{
		allocation = get_allocation();
		int width = allocation.get_width();
		int height = allocation.get_height();
		
		//std::cout << "Width: " << width << std::endl;
		//std::cout << "Height: " << height << std::endl;
		//std::cout << "Height / 12: " << height /12.0 << std::endl;
		
		// coordinates for the center of the window
		int xc, yc;
		xc = width / 2;
		yc = height / 2;
		
		Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
		
		// clip to the area indicated by the expose event so that we only redraw
		// the portion of the window that needs to be redrawn
		//cr -> set_source_rgba(0 , 0, 0 , 1);
		cr->rectangle(event->area.x, event->area.y,
		        event->area.width, event->area.height);
		//cr->rectangle(0,0,event->area.x,event->area.y);
		//cr->stroke_preserve();
		cr->clip();
		
		cr -> set_line_join (Cairo::LINE_JOIN_ROUND);
		
		cr -> move_to( 7, 7);
		cr -> line_to( width-7, 7);
		cr -> line_to( width-7, height-7);
		cr -> line_to( 7, height-7);
		cr -> close_path();
		
		// Draw outline shape
		cr -> set_source_rgb (0.1,0.1,0.1);
		cr -> fill_preserve();
		
		if (!padOnBool)
		{
			cr->set_source_rgba( 0.6, 0.6, 0.6, 0.5);
			cr->set_line_width ( 10.0);
			cr->stroke();
		}
		else
		{
			cr->set_source_rgba( 1.0,0.4,0.0, 0.8);
			cr->set_line_width ( 10.4);
			cr->stroke();
		}
		
		/* Pan functionality Not yet implemented in sampler.
		
		// Draw Pan line: pixel pan = width * pan
		cr -> set_line_cap (Cairo::LINE_CAP_ROUND);
		cr -> set_line_width ( 4.8);
		cr -> set_source_rgba( 1.0,0.8,0.8,0.8);
		cr -> move_to ( width/2 + ((width*pan)/2) , height - (height*volume) + 20);
		cr -> line_to ( width/2 + ((width*pan)/2) , height - (height*volume) - 20);
		cr -> stroke();
		*/
		
		// Draw Volume line: pixel vol = height * volume
		cr -> set_line_width ( 5.1);
		cr -> set_source_rgb( 0.2,0.2,0.2);
		cr -> move_to ( 10      , (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, height-10);
		cr -> line_to ( 10, height-10);
		cr -> close_path();
		cr -> fill();
		
		// Draw Mode: Loop/Hit
		
		if ( !loopSampleBool)
		{
			cr->set_line_width ( 2.2);
			cr->set_source_rgb(0.2,0.2,0.2);
			cr->move_to(width/5,(height/5)*2);
			cr->line_to((width/5)*3,(height/5)*2);
			cr->line_to((width/5)*3,(height/5)*1);
			cr->line_to((width/5)*4,height/2);		// point of arrow
			cr->line_to((width/5)*3,(height/5)*4);
			cr->line_to((width/5)*3,(height/5)*3);
			cr->line_to(width/5,(height/5)*3);
			cr->close_path();
			cr->fill_preserve();
			
			cr->set_source_rgb(0.0,0.9,0.0);
			cr->stroke();
		}
		else // Loop Sample
		{
			cr -> set_source_rgb(0.2,0.2,0.2);
			cr -> arc_negative	(width/2, height/2, ((height  + width)/8)-5 , 6.0, 0.6); 	// inner curve
			cr -> arc			(width/2, height/2, ((height  + width)/6)-5 , 0.5, 6.1); 	// outer curve
			
			cr -> line_to		((width-width/3.5) + width/8  ,	height/2 - height/18 ); 	// right point of arrow
			cr -> line_to		( width-width/3.5,				height/2 + height/18 ); 	// point of arrow
			cr -> line_to		((width-width/3.5) - width/8  ,	height/2 - height/18 ); 	// left point of arrow
			cr -> close_path();
			cr -> fill_preserve();
			cr -> set_line_width(1.9);
			cr -> set_source_rgb(0.0,0.9,0.0);
			cr -> stroke();
		}
		
		// Impose orange volume line (over SampleLoop/Play)
		cr -> move_to ( 10      , (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, (height - ((height-20)*volume))-8 );
		cr -> set_source_rgb(1.0,0.4,0.0);
		cr -> stroke();
		
		// Draw Text in center. Audio Clip name.
		cr -> set_source_rgb( 1.0,0.4,0.0);
		cr -> select_font_face ("Impact" , Cairo::FONT_SLANT_NORMAL,Cairo::FONT_WEIGHT_NORMAL);
		cr -> set_font_size ( 3 + xc/4 );
		Cairo::TextExtents extents;
		std::transform(sampleName.begin(), sampleName.end(), sampleName.begin(), toupper);
		cr -> get_text_extents(sampleName, extents);
		cr -> move_to ( xc - extents.width/2 , height/2+height/18);
		cr -> show_text (sampleName); // sampleName defined in hpp as std::string
	} 
	return true;
}
Esempio n. 7
0
bool
Widget_Curves::on_draw(const Cairo::RefPtr<Cairo::Context> &cr)
{
	const int h(get_height());
	const int w(get_width());

	get_style_context()->render_background(cr, 0, 0, w, h);

	if(!time_adjustment_ || !range_adjustment_ || !h || !w)
		return false;

	if(!curve_list_.size())
		return false;

	const Real t_begin(time_adjustment_->get_lower());
	const Real t_end(time_adjustment_->get_upper());
	const Real dt((t_end-t_begin)/w);

	const Real r_bottom(range_adjustment_->get_value());
	const Real r_top(r_bottom+range_adjustment_->get_page_size());
	const Real dr((r_top-r_bottom)/h);
	Real r_max(-100000000);
	Real r_min(100000000);

	std::list<CurveStruct>::iterator curve_iter;
	//Figure out maximum number of channels
	for(curve_iter=curve_list_.begin();curve_iter!=curve_list_.end();++curve_iter)
	{
		int channels(curve_iter->channels.size());
		if(channels>MAX_CHANNELS)
		{
			channels=MAX_CHANNELS;
			synfig::warning("Not allowed more than %d channels! Truncating...", MAX_CHANNELS);
		}
	}
	// and use it when sizing the points
	vector<Gdk::Point> points[MAX_CHANNELS];

	// Draw zero mark
	cr->set_source_rgb(0.31, 0.31, 0.31);
	cr->rectangle(0, round_to_int((0-r_bottom)/dr), w, 0);
	cr->stroke();

	// This try to find a valid canvas to show the keyframes of those
	// valuenodes. If not canvas found then no keyframes marks are shown.
	synfig::Canvas::Handle canvas=0;
	for(curve_iter=curve_list_.begin();curve_iter!=curve_list_.end();++curve_iter)
	{
		canvas=curve_iter->value_desc.get_canvas();
		if(canvas)
			break;
	}

	if(canvas)
	{
	// Draw vertical lines for the keyframes marks.
		const synfig::KeyframeList& keyframe_list(canvas->keyframe_list());
		synfig::KeyframeList::const_iterator iter;

		for(iter=keyframe_list.begin();iter!=keyframe_list.end();++iter)
		{
			if(!iter->get_time().is_valid())
				continue;

			const int x((int)((float)w/(t_end-t_begin)*(iter->get_time()-t_begin)));
			if(iter->get_time()>=t_begin && iter->get_time()<t_end)
			{
				cr->set_source_rgb(0.63, 0.5, 0.5);
				cr->rectangle(x, 0, 1, h);
				cr->fill();
			}
		}
	}

	// Draw current time
	cr->set_source_rgb(0, 0, 1);
	cr->rectangle(round_to_int((time_adjustment_->get_value()-t_begin)/dt), 0, 0, h);
	cr->stroke();

	// Draw curves for the valuenodes stored in the curve list
	for(curve_iter=curve_list_.begin();curve_iter!=curve_list_.end();++curve_iter)
	{
		Real t;
		int i;
		int channels(curve_iter->channels.size());
		for(i=0;i<channels;i++)
			points[i].clear();

		for(i=0,t=t_begin;i<w;i++,t+=dt)
		{
			for(int chan=0;chan<channels;chan++)
			{
				Real x(curve_iter->get_value(chan,t,dt));
				r_max=max(r_max,x);
				r_min=min(r_min,x);
				points[chan].push_back(
					Gdk::Point(
						i,
						round_to_int(
							(
								x-r_bottom
							)/dr
						)
					)
				);
			}
		}

		// Draw the graph curves with 0.5 width
		cr->set_line_width(0.5);
		for(int chan=0;chan<channels;chan++)
		{
			// Draw the curve
			std::vector<Gdk::Point> &p = points[chan];
			for(std::vector<Gdk::Point>::iterator i = p.begin(); i != p.end(); ++i)
			{
				if (i == p.begin())
					cr->move_to(i->get_x(), i->get_y());
				else
					cr->line_to(i->get_x(), i->get_y());
			}
			const Gdk::Color &color = curve_iter->channels[chan].color;
			cr->set_source_rgb(color.get_red_p(), color.get_green_p(), color.get_blue_p());
			cr->stroke();

			Glib::RefPtr<Pango::Layout> layout(Pango::Layout::create(get_pango_context()));
			layout->set_text(curve_iter->channels[chan].name);

			cr->move_to(1, points[chan][0].get_y()+1);
			layout->show_in_cairo_context(cr);
		}
	}

	if(!curve_list_.empty())
	{
		range_adjustment_->set_upper(r_max+range_adjustment_->get_page_size()/2);
		range_adjustment_->set_lower(r_min-range_adjustment_->get_page_size()/2);
	}

	return true;
}
Esempio n. 8
0
void RegionChooser::draw_regions(const Cairo::RefPtr<Cairo::Context>& cr,
                                 int clip_low, int clip_high) {
    const int w = get_width() - 1;

    Gdk::Cairo::set_source_rgba(cr, black);
    gig::Region* next_region;
    int x3 = -1;
    for (gig::Region* r = regions.first() ; r ; r = next_region) {
        next_region = regions.next();

        if (x3 < 0) {
            x3 = key_to_x(r->KeyRange.low, w);
            if (x3 >= clip_high) break;
        }
        if (!next_region ||
            r->KeyRange.high + 1 != next_region->KeyRange.low ||
            r == region || next_region == region) {

            int x2 = key_to_x(r->KeyRange.high + 1, w);
            if (x2 >= clip_low) {
                cr->move_to(x3, 0.5);
                cr->line_to(x2 + 0.5, 0.5);
                cr->line_to(x2 + 0.5, h1 - 0.5);
                cr->line_to(x3, h1 - 0.5);
                cr->stroke();

                Gdk::Cairo::set_source_rgba(cr, region == r ? red : white);
                cr->rectangle(x3 + 1, 1, x2 - x3 - 1, h1 - 2);
                cr->fill();
                Gdk::Cairo::set_source_rgba(cr, black);
            }
            x3 = -1;
        }
    }

    for (gig::Region* r = regions.first() ; r ; r = regions.next()) {
        int x = key_to_x(r->KeyRange.low, w);

        if (x < clip_low) continue;
        if (x >= clip_high) break;

        cr->move_to(x + 0.5, 1);
        cr->line_to(x + 0.5, h1 - 1);
        cr->stroke();
    }

    // if there is no region yet, show the user some hint text that he may
    // right click on this area to create a new region
    if (!regions.first()) {
        Glib::RefPtr<Pango::Context> context = get_pango_context();
        Glib::RefPtr<Pango::Layout> layout = Pango::Layout::create(context);
        layout->set_alignment(Pango::ALIGN_CENTER);
        layout->set_text(Glib::ustring("*** ") + _("Right click here to create a region.") + " ***");
        layout->set_width(get_width() * Pango::SCALE);
        //layout->set_height(get_height() * Pango::SCALE);
        layout->set_spacing(10);
        Gdk::Cairo::set_source_rgba(cr, red);        
        // get the text dimensions
        int text_width, text_height;
        layout->get_pixel_size(text_width, text_height);
        cr->move_to(0, (REGION_BLOCK_HEIGHT - text_height) / 2);
#if (GTKMM_MAJOR_VERSION == 2 && GTKMM_MINOR_VERSION < 16) || GTKMM_MAJOR_VERSION < 2
        pango_cairo_show_layout(cr->cobj(), layout->gobj());
#else
        layout->show_in_cairo_context(cr);
#endif
    }
}
Esempio n. 9
0
bool GHighPass::on_expose_event(GdkEventExpose* event)
{
  // This is where we draw on the window
  Glib::RefPtr<Gdk::Window> window = get_window();
  
  if(window)    // Only run if Window does exist
  {
    Gtk::Allocation allocation = get_allocation();
    int width = allocation.get_width();
    int height = allocation.get_height();
    
    // clip to the area indicated by the expose event so that we only redraw
    // the portion of the window that needs to be redrawn
    Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
    cr->rectangle(event->area.x, event->area.y,
            event->area.width, event->area.height);
    cr->clip();
    
    cr->rectangle(event->area.x, event->area.y,
        event->area.width, event->area.height);
    setColour(cr, COLOUR_GREY_3 );
    cr->fill();
    
    //cout << "HighPass getting state ID " << ID << endl; 
    float cutoffRangeZeroOne = stateStore->effectState.at(ID).values[0];
    
    cutoff = cutoffRangeZeroOne;
    
    bool active = stateStore->effectState.at(ID).active;
    bool globalUnit = stateStore->effectState.at(ID).globalUnit;
    
    int x = 0;
    int y = 0;
    xSize = 73;
    ySize = 37;
    
    // works but a bit simple
    cr -> move_to( x        , y         );
    cr -> line_to( x + xSize, y         );
    cr -> line_to( x + xSize, y + ySize );
    cr -> line_to( x        , y + ySize );
    cr -> close_path();
    
    // Draw outline shape
    cr -> set_source_rgb (0.1,0.1,0.1);
    cr -> fill();
    
    // draw "frequency guides"
    std::valarray< double > dashes(2);
    dashes[0] = 2.0;
    dashes[1] = 2.0;
    cr->set_dash (dashes, 0.0);
    cr->set_line_width(1.0);
    cr->set_source_rgb (0.4,0.4,0.4);
    for ( int i = 0; i < 3; i++ )
    {
      cr->move_to( x + ((xSize / 3.f)*i), y );
      cr->line_to( x + ((xSize / 3.f)*i), y + ySize );
    }
    for ( int i = 0; i < 3; i++ )
    {
      cr->move_to( x       , y + ((ySize / 3.f)*i) );
      cr->line_to( x +xSize, y + ((ySize / 3.f)*i) );
    }
    cr->stroke();
    cr->unset_dash();
    
    // move to bottom left, draw line to middle left
    cr->move_to( x + xSize-2 , y + ySize );
    cr->line_to( x + xSize-2 , y + (ySize/2));
    
    
    int startHorizontalLine = xSize* (cutoff + 0.4);
    if ( startHorizontalLine > 75 )
      startHorizontalLine = 75;
      
    cr->line_to( startHorizontalLine, y + (ySize/2) ); // horizontal line to start of curve
    
    int xSize1CP1 = xSize* (cutoff +0.1);
    int xSize1CP2 = xSize* (cutoff +0.08);
    int xSize1End = xSize* cutoff;
    
    if ( xSize1CP1 > 75 )
      xSize1CP1 = 75;
    if ( xSize1CP2 > 75 )
      xSize1CP2 = 75;
    if ( xSize1End > 75 )
      xSize1End = 75;
    
    cr->curve_to( xSize1CP1, y+(ySize*0.5),   // control point 1
                  xSize1CP2, y+(ySize*0.3),   // control point 2
                  xSize1End, y+(ySize*0.3));  // end of curve 1, start curve 2
    
    int xSize2CP1 = xSize* (cutoff - 0.03);
    int xSize2CP2 = xSize* (cutoff - 0.08);
    int xSize2End = xSize* (cutoff - 0.15);
    
    if ( xSize2CP1 > 75 )
      xSize2CP1 = 75;
    if ( xSize2CP2 > 75 )
      xSize2CP2 = 75;
    if ( xSize2End > 75 )
      xSize2End = 75;
    
    cr->curve_to( xSize2CP1, y+(ySize*0.3),  // control point 1
                  xSize2CP2, y+(ySize*0.3), // control point 2
                  xSize2End, y+(ySize)   ); // end of curve on floor
    
    if (active)
      setColour(cr, COLOUR_BLUE_1, 0.2 );
    else
      setColour(cr, COLOUR_GREY_1, 0.2 );
    cr->close_path();
    cr->fill_preserve();
    
    // stroke cutoff line
    cr->set_line_width(2.5);
    if ( active )
      setColour(cr, COLOUR_BLUE_1 );
    else
      setColour(cr, COLOUR_GREY_1 );
    cr->stroke();
    
    // click center
    if ( globalUnit )
    {
      if ( active )
        setColour(cr, COLOUR_GREEN_1, 0.9 );
      else
        setColour(cr, COLOUR_GREY_1,0.9 );
      cr->move_to( xSize * cutoff - 5, ySize*q - 5 );
      cr->line_to( xSize * cutoff + 5, ySize*q + 5 );
      cr->move_to( xSize * cutoff - 5, ySize*q + 5 );
      cr->line_to( xSize * cutoff + 5, ySize*q - 5 );
      cr->stroke();
    }
    else
    {
      if ( active )
        setColour(cr, COLOUR_ORANGE_1, 0.9 );
      else
        setColour(cr, COLOUR_GREY_1, 0.9 );
      cr->arc( xSize*cutoff, ySize*q, 7, 0, 6.2830 );
      cr->stroke();
    }
    
    // dials
    Dial(cr, active, 70, 140, cutoffRangeZeroOne, DIAL_MODE_NORMAL);
    Dial(cr, active, 150,140, q                 , DIAL_MODE_NORMAL);
    
    // outline
    setColour(cr, COLOUR_GREY_3 );
    cr->rectangle( x, y , xSize, ySize );
    cr->set_line_width(3);
    
    setColour(cr, COLOUR_GREY_2 );
    cr->stroke();
    
    /*
    if ( state.selected )
    {
      cr->rectangle(0, 0, 74, 216);
      setColour( cr, COLOUR_PURPLE_1 );
      cr->set_line_width(1);
      cr->stroke();
    }
    */
    
  }
  return true;
}