void
updateControlPanel()
{
// erase all child controls and just rebuild them b/c we're lazy.
//Rebuild all the image layers
s_imageBox->clearControls();
int row = 0;
LabelControl* activeLabel = new LabelControl( "Image Layers", 20, osg::Vec4f(1,1,0,1) );
s_imageBox->setControl( 1, row++, activeLabel );
// the active map layers:
MapFrame mapf( s_activeMap.get() );
ImageLayerVector imageLayers;
mapf.getLayers(imageLayers);
int layerNum = imageLayers.size()-1;
for( ImageLayerVector::const_reverse_iterator i = imageLayers.rbegin(); i != imageLayers.rend(); ++i )
createLayerItem( s_imageBox, row++, layerNum--, imageLayers.size(), i->get(), true );
MapFrame mapf2( s_inactiveMap.get() );
imageLayers.clear();
mapf2.getLayers(imageLayers);
if ( imageLayers.size() > 0 )
{
LabelControl* inactiveLabel = new LabelControl( "Removed:", 18, osg::Vec4f(1,1,0,1) );
s_imageBox->setControl( 1, row++, inactiveLabel );
for( unsigned int i=0; i<imageLayers.size(); ++i )
{
createLayerItem( s_imageBox, row++, -1, -1, imageLayers[i].get(), false );
}
}
//Rebuild the elevation layers
s_elevationBox->clearControls();
row = 0;
activeLabel = new LabelControl( "Elevation Layers", 20, osg::Vec4f(1,1,0,1) );
s_elevationBox->setControl( 1, row++, activeLabel );
// the active map layers:
ElevationLayerVector elevationLayers;
mapf.getLayers(elevationLayers);
layerNum = elevationLayers.size()-1;
for( ElevationLayerVector::const_reverse_iterator i = elevationLayers.rbegin(); i != elevationLayers.rend(); ++i )
createLayerItem( s_elevationBox, row++, layerNum--, elevationLayers.size(), i->get(), true );
if ( mapf2.elevationLayers().size() > 0 )
{
LabelControl* inactiveLabel = new LabelControl( "Removed:", 18, osg::Vec4f(1,1,0,1) );
s_elevationBox->setControl( 1, row++, inactiveLabel );
for( unsigned int i=0; i<mapf2.elevationLayers().size(); ++i )
{
createLayerItem( s_elevationBox, row++, -1, -1, mapf2.elevationLayers().at(i), false );
}
}
//Rebuild the model layers
s_modelBox->clearControls();
row = 0;
activeLabel = new LabelControl( "Model Layers", 20, osg::Vec4f(1,1,0,1) );
s_modelBox->setControl( 1, row++, activeLabel );
// the active map layers:
ModelLayerVector modelLayers;
mapf.getLayers(modelLayers);
for( ModelLayerVector::const_reverse_iterator i = modelLayers.rbegin(); i != modelLayers.rend(); ++i )
createModelLayerItem( s_modelBox, row++, i->get(), true );
}
bool
ElevationLayerVector::populateHeightField(osg::HeightField* hf,
const TileKey& key,
const Profile* haeProfile,
ElevationInterpolation interpolation,
ProgressCallback* progress ) const
{
//osg::Timer_t startTime = osg::Timer::instance()->tick();
// heightfield must already exist.
if ( !hf )
return false;
// if the caller provided an "HAE map profile", he wants an HAE elevation grid even if
// the map profile has a vertical datum. This is the usual case when building the 3D
// terrain, for example. Construct a temporary key that doesn't have the vertical
// datum info and use that to query the elevation data.
TileKey keyToUse = key;
if ( haeProfile )
{
keyToUse = TileKey(key.getLOD(), key.getTileX(), key.getTileY(), haeProfile );
}
// Collect the valid layers for this tile.
LayerAndKeyVector contenders;
LayerAndKeyVector offsets;
// Track the number of layers that would return fallback data.
unsigned numFallbackLayers = 0;
// Check them in reverse order since the highest priority is last.
for(ElevationLayerVector::const_reverse_iterator i = this->rbegin(); i != this->rend(); ++i)
{
ElevationLayer* layer = i->get();
if ( layer->getEnabled() && layer->getVisible() )
{
// calculate the resolution-mapped key (adjusted for tile resolution differential).
TileKey mappedKey = keyToUse.mapResolution(
hf->getNumColumns(),
layer->getTileSize() );
bool useLayer = true;
TileKey bestKey( mappedKey );
// Is there a tilesource? If not we are cache-only and cannot reject the layer.
if ( layer->getTileSource() )
{
// Check whether the non-mapped key is valid according to the user's min/max level settings:
if ( !layer->isKeyInRange(key) )
{
useLayer = false;
}
// Find the "best available" mapped key from the tile source:
else
{
if ( layer->getTileSource()->getBestAvailableTileKey(mappedKey, bestKey) )
{
// If the bestKey is not the mappedKey, this layer is providing
// fallback data (data at a lower resolution than requested)
if ( mappedKey != bestKey )
{
numFallbackLayers++;
}
}
else
{
useLayer = false;
}
}
}
if ( useLayer )
{
if ( layer->isOffset() )
{
offsets.push_back( std::make_pair(layer, bestKey) );
}
else
{
contenders.push_back( std::make_pair(layer, bestKey) );
}
}
}
}
// nothing? bail out.
if ( contenders.empty() && offsets.empty() )
{
return false;
}
// if everything is fallback data, bail out.
if ( contenders.size() + offsets.size() == numFallbackLayers )
{
return false;
}
// Sample the layers into our target.
unsigned numColumns = hf->getNumColumns();
unsigned numRows = hf->getNumRows();
double xmin = key.getExtent().xMin();
double ymin = key.getExtent().yMin();
double dx = key.getExtent().width() / (double)(numColumns-1);
double dy = key.getExtent().height() / (double)(numRows-1);
// We will load the actual heightfields on demand. We might not need them all.
GeoHeightFieldVector heightFields(contenders.size());
GeoHeightFieldVector offsetFields(offsets.size());
std::vector<bool> heightFailed(contenders.size(), false);
std::vector<bool> offsetFailed(offsets.size(), false);
// The maximum number of heightfields to keep in this local cache
unsigned int maxHeightFields = 50;
unsigned numHeightFieldsInCache = 0;
//double fallBackTime = 0;
const SpatialReference* keySRS = keyToUse.getProfile()->getSRS();
bool realData = false;
//unsigned int numFallback = 0;
unsigned int total = numColumns * numRows;
unsigned int completed = 0;
for (unsigned c = 0; c < numColumns; ++c)
{
double x = xmin + (dx * (double)c);
for (unsigned r = 0; r < numRows; ++r)
{
double y = ymin + (dy * (double)r);
// Collect elevations from each layer as necessary.
bool resolved = false;
for(int i=0; i<contenders.size() && !resolved; ++i)
{
if ( heightFailed[i] )
continue;
ElevationLayer* layer = contenders[i].first.get();
GeoHeightField& layerHF = heightFields[i];
if ( !layerHF.valid() )
{
layerHF = layer->createHeightField(contenders[i].second, progress);
if ( !layerHF.valid() )
{
// This layer potentially has data or it wouldn't have ended up in the contendors list, so try falling back on the parent
TileKey parentKey = contenders[i].second.createParentKey();
while (!layerHF.valid() && parentKey.valid())
{
//numFallback++;
//osg::Timer_t fbStartTime = osg::Timer::instance()->tick();
GeoHeightField parentHF = layer->createHeightField(parentKey, progress);
//osg::Timer_t fbEndTime = osg::Timer::instance()->tick();
// Only penalize time wasted actually falling back.
//if (!parentHF.valid())
// {
// fallBackTime += osg::Timer::instance()->delta_m(fbStartTime, fbEndTime);
//}
if (parentHF.valid())
{
layerHF = parentHF;
break;
}
else
{
parentKey = parentKey.createParentKey();
}
}
if (!layerHF.valid())
{
heightFailed[i] = true;
continue;
}
}
else
{
numHeightFieldsInCache++;
}
}
// If we actually got a layer then we have real data
realData = true;
float elevation;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation) &&
elevation != NO_DATA_VALUE)
{
resolved = true;
hf->setHeight(c, r, elevation);
}
// Clear the heightfield cache if we have too many heightfields in the cache.
if (numHeightFieldsInCache >= maxHeightFields)
{
//OE_NOTICE << "Clearing cache" << std::endl;
for (unsigned int k = 0; k < heightFields.size(); k++)
{
heightFields[k] = GeoHeightField::INVALID;
}
numHeightFieldsInCache = 0;
}
}
for(int i=offsets.size()-1; i>=0; --i)
{
if ( offsetFailed[i] )
continue;
GeoHeightField& layerHF = offsetFields[i];
if ( !layerHF.valid() )
{
ElevationLayer* offset = offsets[i].first.get();
layerHF = offset->createHeightField(offsets[i].second, progress);
if ( !layerHF.valid() )
{
offsetFailed[i] = true;
continue;
}
}
// If we actually got a layer then we have real data
realData = true;
float elevation = 0.0f;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation) &&
elevation != NO_DATA_VALUE)
{
hf->getHeight(c, r) += elevation;
}
}
completed++;
//OE_NOTICE << "Completed " << completed << " of " << total << std::endl;
}
}
//osg::Timer_t endTime = osg::Timer::instance()->tick();
//double totalTime = osg::Timer::instance()->delta_m(startTime, endTime);
// double fallbackPercentage = fallBackTime / totalTime;
//if (fallBackTime > 0)
//{
// OE_NOTICE << "populateHeightField took " << totalTime << "ms fallbacktime=" << fallBackTime << "ms count=" << numFallback << " percentage=" << fallbackPercentage << std::endl;
//}
//else
//{
// OE_NOTICE << "populateHeightField took " << totalTime << "ms" << std::endl;
//}
// Return whether or not we actually read any real data
return realData;
}
bool
ElevationLayerVector::populateHeightField(osg::HeightField* hf,
const TileKey& key,
const Profile* haeProfile,
ElevationInterpolation interpolation,
ProgressCallback* progress ) const
{
// heightfield must already exist.
if ( !hf )
return false;
// if the caller provided an "HAE map profile", he wants an HAE elevation grid even if
// the map profile has a vertical datum. This is the usual case when building the 3D
// terrain, for example. Construct a temporary key that doesn't have the vertical
// datum info and use that to query the elevation data.
TileKey keyToUse = key;
if ( haeProfile )
{
keyToUse = TileKey(key.getLOD(), key.getTileX(), key.getTileY(), haeProfile );
}
// Collect the valid layers for this tile.
ElevationLayerVector contenders;
ElevationLayerVector offsets;
for(ElevationLayerVector::const_reverse_iterator i = this->rbegin(); i != this->rend(); ++i)
{
ElevationLayer* layer = i->get();
if ( layer->getEnabled() && layer->getVisible() )
{
// calculate the resolution-mapped key (adjusted for tile resolution differential).
TileKey mappedKey =
keyToUse.mapResolution(hf->getNumColumns(), layer->getTileSize());
// Note: isKeyInRange tests the key, but haData tests the mapped key.
// I think that's right!
if ((layer->getTileSource() == 0L) ||
(layer->isKeyInRange(key) && layer->getTileSource()->hasData(mappedKey)))
{
if (layer->isOffset())
offsets.push_back(layer);
else
contenders.push_back(layer);
}
}
}
// nothing? bail out.
if ( contenders.empty() && offsets.empty() )
{
return false;
}
// Sample the layers into our target.
unsigned numColumns = hf->getNumColumns();
unsigned numRows = hf->getNumRows();
double xmin = key.getExtent().xMin();
double ymin = key.getExtent().yMin();
double dx = key.getExtent().width() / (double)(numColumns-1);
double dy = key.getExtent().height() / (double)(numRows-1);
// We will load the actual heightfields on demand. We might not need them all.
GeoHeightFieldVector heightFields(contenders.size());
GeoHeightFieldVector offsetFields(offsets.size());
std::vector<bool> heightFailed (contenders.size(), false);
std::vector<bool> offsetFailed(offsets.size(), false);
const SpatialReference* keySRS = keyToUse.getProfile()->getSRS();
bool realData = false;
for (unsigned c = 0; c < numColumns; ++c)
{
double x = xmin + (dx * (double)c);
for (unsigned r = 0; r < numRows; ++r)
{
double y = ymin + (dy * (double)r);
// Collect elevations from each layer as necessary.
bool resolved = false;
for(int i=0; i<contenders.size() && !resolved; ++i)
{
if ( heightFailed[i] )
continue;
GeoHeightField& layerHF = heightFields[i];
if ( !layerHF.valid() )
{
TileKey mappedKey =
keyToUse.mapResolution(hf->getNumColumns(), contenders[i]->getTileSize());
layerHF = contenders[i]->createHeightField(mappedKey, progress);
if ( !layerHF.valid() )
{
heightFailed[i] = true;
continue;
}
}
// If we actually got a layer then we have real data
realData = true;
float elevation;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation) &&
elevation != NO_DATA_VALUE)
{
resolved = true;
hf->setHeight(c, r, elevation);
}
}
for(int i=offsets.size()-1; i>=0; --i)
{
if ( offsetFailed[i] )
continue;
GeoHeightField& layerHF = offsetFields[i];
if ( !layerHF.valid() )
{
TileKey mappedKey =
keyToUse.mapResolution(hf->getNumColumns(), offsets[i]->getTileSize());
layerHF = offsets[i]->createHeightField(mappedKey, progress);
if ( !layerHF.valid() )
{
offsetFailed[i] = true;
continue;
}
}
// If we actually got a layer then we have real data
realData = true;
float elevation = 0.0f;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation) &&
elevation != NO_DATA_VALUE)
{
hf->getHeight(c, r) += elevation;
}
}
}
}
// Return whether or not we actually read any real data
return realData;
}
bool
ElevationLayerVector::populateHeightField(osg::HeightField* hf,
const TileKey& key,
const Profile* haeProfile,
ElevationInterpolation interpolation,
ProgressCallback* progress ) const
{
// heightfield must already exist.
if ( !hf )
return false;
// if the caller provided an "HAE map profile", he wants an HAE elevation grid even if
// the map profile has a vertical datum. This is the usual case when building the 3D
// terrain, for example. Construct a temporary key that doesn't have the vertical
// datum info and use that to query the elevation data.
TileKey keyToUse = key;
if ( haeProfile )
{
keyToUse = TileKey(key.getLOD(), key.getTileX(), key.getTileY(), haeProfile );
}
// Collect the valid layers for this tile.
LayerAndKeyVector contenders;
LayerAndKeyVector offsets;
// Track the number of layers that would return fallback data.
unsigned numFallbackLayers = 0;
// Check them in reverse order since the highest priority is last.
for(ElevationLayerVector::const_reverse_iterator i = this->rbegin(); i != this->rend(); ++i)
{
ElevationLayer* layer = i->get();
if ( layer->getEnabled() && layer->getVisible() )
{
// calculate the resolution-mapped key (adjusted for tile resolution differential).
TileKey mappedKey = keyToUse.mapResolution(
hf->getNumColumns(),
layer->getTileSize() );
bool useLayer = true;
TileKey bestKey( mappedKey );
// Is there a tilesource? If not we are cache-only and cannot reject the layer.
if ( layer->getTileSource() )
{
// Check whether the non-mapped key is valid according to the user's min/max level settings:
if ( !layer->isKeyInRange(key) )
{
useLayer = false;
}
// Find the "best available" mapped key from the tile source:
else
{
if ( layer->getTileSource()->getBestAvailableTileKey(mappedKey, bestKey) )
{
// If the bestKey is not the mappedKey, this layer is providing
// fallback data (data at a lower resolution than requested)
if ( mappedKey != bestKey )
{
numFallbackLayers++;
}
}
else
{
useLayer = false;
}
}
}
if ( useLayer )
{
if ( layer->isOffset() )
{
offsets.push_back( std::make_pair(layer, bestKey) );
}
else
{
contenders.push_back( std::make_pair(layer, bestKey) );
}
}
}
}
// nothing? bail out.
if ( contenders.empty() && offsets.empty() )
{
return false;
}
// if everything is fallback data, bail out.
if ( contenders.size() + offsets.size() == numFallbackLayers )
{
return false;
}
// Sample the layers into our target.
unsigned numColumns = hf->getNumColumns();
unsigned numRows = hf->getNumRows();
double xmin = key.getExtent().xMin();
double ymin = key.getExtent().yMin();
double dx = key.getExtent().width() / (double)(numColumns-1);
double dy = key.getExtent().height() / (double)(numRows-1);
// If the incoming heightfield requests a positive border width,
// we need to adjust the extents so that we request data outside the
// extent of the tile key:
unsigned border = hf->getBorderWidth();
if (border > 0u)
{
dx = key.getExtent().width() / (double)(numColumns - (border*2+1));
dy = key.getExtent().height() / (double)(numRows - (border*2+1));
xmin -= dx * (double)border;
ymin -= dy * (double)border;
}
// We will load the actual heightfields on demand. We might not need them all.
#if 0
GeoHeightFieldVector heightFields(contenders.size());
GeoHeightFieldVector offsetFields(offsets.size());
std::vector<bool> heightFallback(contenders.size(), false);
std::vector<bool> heightFailed(contenders.size(), false);
std::vector<bool> offsetFailed(offsets.size(), false);
#else
GeoHeightFieldVector heightFields[9];
GeoHeightFieldVector offsetFields[9]; //(offsets.size());
std::vector<bool> heightFallback[9]; //(contenders.size(), false);
std::vector<bool> heightFailed[9]; //(contenders.size(), false);
std::vector<bool> offsetFailed[9]; //(offsets.size(), false);
for (int n = 0; n < 9; ++n)
{
heightFields[n].resize(contenders.size());
offsetFields[n].resize(offsets.size());
heightFallback[n].assign(9, false);
heightFailed[n].assign(9, false);
offsetFailed[n].assign(9, false);
}
#endif
// The maximum number of heightfields to keep in this local cache
unsigned int maxHeightFields = 50;
unsigned numHeightFieldsInCache = 0;
const SpatialReference* keySRS = keyToUse.getProfile()->getSRS();
bool realData = false;
unsigned int total = numColumns * numRows;
unsigned int completed = 0;
int nodataCount = 0;
for (unsigned c = 0; c < numColumns; ++c)
{
double x = xmin + (dx * (double)c);
for (unsigned r = 0; r < numRows; ++r)
{
double y = ymin + (dy * (double)r);
// Collect elevations from each layer as necessary.
bool resolved = false;
for(int i=0; i<contenders.size() && !resolved; ++i)
{
ElevationLayer* layer = contenders[i].first.get();
TileKey contenderKey = contenders[i].second;
// If there is a border, the edge points may not fall within the key extents
// and we may need to fetch a neighboring key.
int n = 4; // index 4 is the center/default tile
if (border > 0u && !contenderKey.getExtent().contains(x, y))
{
int dTx = x < contenderKey.getExtent().xMin() ? -1 : x > contenderKey.getExtent().xMax() ? +1 : 0;
int dTy = y < contenderKey.getExtent().yMin() ? +1 : y > contenderKey.getExtent().yMax() ? -1 : 0;
contenderKey = contenderKey.createNeighborKey(dTx, dTy);
n = (dTy+1)*3 + (dTx+1);
}
if ( heightFailed[n][i] )
continue;
TileKey actualKey = contenderKey;
GeoHeightField& layerHF = heightFields[n][i];
if (!layerHF.valid())
{
// We couldn't get the heightfield from the cache, so try to create it.
// We also fallback on parent layers to make sure that we have data at the location even if it's fallback.
while (!layerHF.valid() && actualKey.valid())
{
layerHF = layer->createHeightField(actualKey, progress);
if (!layerHF.valid())
{
actualKey = actualKey.createParentKey();
}
}
// Mark this layer as fallback if necessary.
if (layerHF.valid())
{
heightFallback[n][i] = (actualKey != contenderKey); // actualKey != contenders[i].second;
numHeightFieldsInCache++;
}
else
{
heightFailed[n][i] = true;
continue;
}
}
if (layerHF.valid())
{
bool isFallback = heightFallback[n][i];
// We only have real data if this is not a fallback heightfield.
if (!isFallback)
{
realData = true;
}
float elevation;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation))
{
if ( elevation != NO_DATA_VALUE )
{
resolved = true;
hf->setHeight(c, r, elevation);
}
else
{
++nodataCount;
}
}
}
// Clear the heightfield cache if we have too many heightfields in the cache.
if (numHeightFieldsInCache >= maxHeightFields)
{
//OE_NOTICE << "Clearing cache" << std::endl;
for (unsigned int j = 0; j < 9; ++j)
{
for (unsigned int k = 0; k < heightFields[j].size(); k++)
{
heightFields[j][k] = GeoHeightField::INVALID;
heightFallback[j][k] = false;
}
}
numHeightFieldsInCache = 0;
}
}
for(int i=offsets.size()-1; i>=0; --i)
{
TileKey contenderKey = offsets[i].second;
// If there is a border, the edge points may not fall within the key extents
// and we may need to fetch a neighboring key.
int n = 4; // index 4 is the center/default tile
if (border > 0u && !contenderKey.getExtent().contains(x, y))
{
int dTx = x < contenderKey.getExtent().xMin() ? -1 : x > contenderKey.getExtent().xMax() ? +1 : 0;
int dTy = y < contenderKey.getExtent().yMin() ? +1 : x > contenderKey.getExtent().yMax() ? -1 : 0;
contenderKey = contenderKey.createNeighborKey(dTx, dTy);
n = (dTy+1)*3 + (dTx+1);
}
if ( offsetFailed[n][i] == true )
continue;
GeoHeightField& layerHF = offsetFields[n][i];
if ( !layerHF.valid() )
{
ElevationLayer* offset = offsets[i].first.get();
layerHF = offset->createHeightField(contenderKey, progress);
if ( !layerHF.valid() )
{
offsetFailed[n][i] = true;
continue;
}
}
// If we actually got a layer then we have real data
realData = true;
float elevation = 0.0f;
if (layerHF.getElevation(keySRS, x, y, interpolation, keySRS, elevation) &&
elevation != NO_DATA_VALUE)
{
hf->getHeight(c, r) += elevation;
}
}
}
}
// Return whether or not we actually read any real data
return realData;
}