Framebuffer11::Framebuffer11(const gl::Framebuffer::Data &data, Renderer11 *renderer)
: FramebufferD3D(data, renderer), mRenderer(renderer), mCachedDepthStencilRenderTarget(nullptr)
{
ASSERT(mRenderer != nullptr);
mCachedColorRenderTargets.fill(nullptr);
for (size_t colorIndex = 0; colorIndex < data.getColorAttachments().size(); ++colorIndex)
{
auto callback = [this, colorIndex]()
{
this->markColorRenderTargetDirty(colorIndex);
};
mColorRenderTargetsDirty.push_back(callback);
}
mDepthStencilRenderTargetDirty = [this]()
{
this->markDepthStencilRenderTargetDirty();
};
}
gl::Error Clear11::clearFramebuffer(const ClearParameters &clearParams, const gl::Framebuffer::Data &fboData)
{
const auto &colorAttachments = fboData.getColorAttachments();
const auto &drawBufferStates = fboData.getDrawBufferStates();
const auto *depthAttachment = fboData.getDepthAttachment();
const auto *stencilAttachment = fboData.getStencilAttachment();
ASSERT(colorAttachments.size() == drawBufferStates.size());
// Iterate over the color buffers which require clearing and determine if they can be
// cleared with ID3D11DeviceContext::ClearRenderTargetView or ID3D11DeviceContext1::ClearView.
// This requires:
// 1) The render target is being cleared to a float value (will be cast to integer when clearing integer
// render targets as expected but does not work the other way around)
// 2) The format of the render target has no color channels that are currently masked out.
// Clear the easy-to-clear buffers on the spot and accumulate the ones that require special work.
//
// If these conditions are met, and:
// - No scissored clear is needed, then clear using ID3D11DeviceContext::ClearRenderTargetView.
// - A scissored clear is needed then clear using ID3D11DeviceContext1::ClearView if available.
// Otherwise draw a quad.
//
// Also determine if the depth stencil can be cleared with ID3D11DeviceContext::ClearDepthStencilView
// by checking if the stencil write mask covers the entire stencil.
//
// To clear the remaining buffers, quads must be drawn containing an int, uint or float vertex color
// attribute.
gl::Extents framebufferSize;
const gl::FramebufferAttachment *colorAttachment = fboData.getFirstColorAttachment();
if (colorAttachment != nullptr)
{
framebufferSize = colorAttachment->getSize();
}
else if (depthAttachment != nullptr)
{
framebufferSize = depthAttachment->getSize();
}
else if (stencilAttachment != nullptr)
{
framebufferSize = stencilAttachment->getSize();
}
else
{
UNREACHABLE();
return gl::Error(GL_INVALID_OPERATION);
}
if (clearParams.scissorEnabled && (clearParams.scissor.x >= framebufferSize.width ||
clearParams.scissor.y >= framebufferSize.height ||
clearParams.scissor.x + clearParams.scissor.width <= 0 ||
clearParams.scissor.y + clearParams.scissor.height <= 0))
{
// Scissor is enabled and the scissor rectangle is outside the renderbuffer
return gl::Error(GL_NO_ERROR);
}
bool needScissoredClear = clearParams.scissorEnabled && (clearParams.scissor.x > 0 || clearParams.scissor.y > 0 ||
clearParams.scissor.x + clearParams.scissor.width < framebufferSize.width ||
clearParams.scissor.y + clearParams.scissor.height < framebufferSize.height);
std::vector<MaskedRenderTarget> maskedClearRenderTargets;
RenderTarget11* maskedClearDepthStencil = nullptr;
ID3D11DeviceContext *deviceContext = mRenderer->getDeviceContext();
ID3D11DeviceContext1 *deviceContext1 = mRenderer->getDeviceContext1IfSupported();
ID3D11Device *device = mRenderer->getDevice();
for (size_t colorAttachmentIndex = 0; colorAttachmentIndex < colorAttachments.size();
colorAttachmentIndex++)
{
const gl::FramebufferAttachment &attachment = colorAttachments[colorAttachmentIndex];
if (clearParams.clearColor[colorAttachmentIndex] && attachment.isAttached() &&
drawBufferStates[colorAttachmentIndex] != GL_NONE)
{
RenderTarget11 *renderTarget = nullptr;
gl::Error error = attachment.getRenderTarget(&renderTarget);
if (error.isError())
{
return error;
}
const gl::InternalFormat &formatInfo = gl::GetInternalFormatInfo(attachment.getInternalFormat());
if (clearParams.colorClearType == GL_FLOAT &&
!(formatInfo.componentType == GL_FLOAT || formatInfo.componentType == GL_UNSIGNED_NORMALIZED || formatInfo.componentType == GL_SIGNED_NORMALIZED))
{
ERR(
"It is undefined behaviour to clear a render buffer which is not normalized "
"fixed point or floating-"
"point to floating point values (color attachment %u has internal format "
"0x%X).",
colorAttachmentIndex, attachment.getInternalFormat());
}
if ((formatInfo.redBits == 0 || !clearParams.colorMaskRed) &&
(formatInfo.greenBits == 0 || !clearParams.colorMaskGreen) &&
(formatInfo.blueBits == 0 || !clearParams.colorMaskBlue) &&
(formatInfo.alphaBits == 0 || !clearParams.colorMaskAlpha))
{
// Every channel either does not exist in the render target or is masked out
continue;
}
else if ((!(mRenderer->getRenderer11DeviceCaps().supportsClearView) && needScissoredClear) || clearParams.colorClearType != GL_FLOAT ||
(formatInfo.redBits > 0 && !clearParams.colorMaskRed) ||
(formatInfo.greenBits > 0 && !clearParams.colorMaskGreen) ||
(formatInfo.blueBits > 0 && !clearParams.colorMaskBlue) ||
(formatInfo.alphaBits > 0 && !clearParams.colorMaskAlpha))
{
// A masked clear is required, or a scissored clear is required and ID3D11DeviceContext1::ClearView is unavailable
MaskedRenderTarget maskAndRt;
bool clearColor = clearParams.clearColor[colorAttachmentIndex];
maskAndRt.colorMask[0] = (clearColor && clearParams.colorMaskRed);
maskAndRt.colorMask[1] = (clearColor && clearParams.colorMaskGreen);
maskAndRt.colorMask[2] = (clearColor && clearParams.colorMaskBlue);
maskAndRt.colorMask[3] = (clearColor && clearParams.colorMaskAlpha);
maskAndRt.renderTarget = renderTarget;
maskedClearRenderTargets.push_back(maskAndRt);
}
else
{
// ID3D11DeviceContext::ClearRenderTargetView or ID3D11DeviceContext1::ClearView is possible
ID3D11RenderTargetView *framebufferRTV = renderTarget->getRenderTargetView();
if (!framebufferRTV)
{
return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
}
const auto &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(
d3d11::GetANGLEFormatSet(renderTarget->getANGLEFormat()).rtvFormat);
// Check if the actual format has a channel that the internal format does not and set them to the
// default values
float clearValues[4] =
{
((formatInfo.redBits == 0 && dxgiFormatInfo.redBits > 0) ? 0.0f : clearParams.colorFClearValue.red),
((formatInfo.greenBits == 0 && dxgiFormatInfo.greenBits > 0) ? 0.0f : clearParams.colorFClearValue.green),
((formatInfo.blueBits == 0 && dxgiFormatInfo.blueBits > 0) ? 0.0f : clearParams.colorFClearValue.blue),
((formatInfo.alphaBits == 0 && dxgiFormatInfo.alphaBits > 0) ? 1.0f : clearParams.colorFClearValue.alpha),
};
if (dxgiFormatInfo.alphaBits == 1)
{
// Some drivers do not correctly handle calling Clear() on a format with 1-bit alpha.
// They can incorrectly round all non-zero values up to 1.0f. Note that WARP does not do this.
// We should handle the rounding for them instead.
clearValues[3] = (clearParams.colorFClearValue.alpha >= 0.5f) ? 1.0f : 0.0f;
}
if (needScissoredClear)
{
// We shouldn't reach here if deviceContext1 is unavailable.
ASSERT(deviceContext1);
D3D11_RECT rect;
rect.left = clearParams.scissor.x;
rect.right = clearParams.scissor.x + clearParams.scissor.width;
rect.top = clearParams.scissor.y;
rect.bottom = clearParams.scissor.y + clearParams.scissor.height;
deviceContext1->ClearView(framebufferRTV, clearValues, &rect, 1);
}
else
{
deviceContext->ClearRenderTargetView(framebufferRTV, clearValues);
}
}
}
}
if (clearParams.clearDepth || clearParams.clearStencil)
{
const gl::FramebufferAttachment *attachment = (depthAttachment != nullptr) ? depthAttachment : stencilAttachment;
ASSERT(attachment != nullptr);
RenderTarget11 *renderTarget = nullptr;
gl::Error error = attachment->getRenderTarget(&renderTarget);
if (error.isError())
{
return error;
}
const auto &dxgiFormatInfo = d3d11::GetDXGIFormatInfo(
d3d11::GetANGLEFormatSet(renderTarget->getANGLEFormat()).dsvFormat);
unsigned int stencilUnmasked = (stencilAttachment != nullptr) ? (1 << dxgiFormatInfo.stencilBits) - 1 : 0;
bool needMaskedStencilClear = clearParams.clearStencil && (clearParams.stencilWriteMask & stencilUnmasked) != stencilUnmasked;
if (needScissoredClear || needMaskedStencilClear)
{
maskedClearDepthStencil = renderTarget;
}
else
{
ID3D11DepthStencilView *framebufferDSV = renderTarget->getDepthStencilView();
if (!framebufferDSV)
{
return gl::Error(GL_OUT_OF_MEMORY, "Internal depth stencil view pointer unexpectedly null.");
}
UINT clearFlags = (clearParams.clearDepth ? D3D11_CLEAR_DEPTH : 0) |
(clearParams.clearStencil ? D3D11_CLEAR_STENCIL : 0);
FLOAT depthClear = gl::clamp01(clearParams.depthClearValue);
UINT8 stencilClear = clearParams.stencilClearValue & 0xFF;
deviceContext->ClearDepthStencilView(framebufferDSV, clearFlags, depthClear, stencilClear);
}
}
if (maskedClearRenderTargets.size() > 0 || maskedClearDepthStencil)
{
// To clear the render targets and depth stencil in one pass:
//
// Render a quad clipped to the scissor rectangle which draws the clear color and a blend
// state that will perform the required color masking.
//
// The quad's depth is equal to the depth clear value with a depth stencil state that
// will enable or disable depth test/writes if the depth buffer should be cleared or not.
//
// The rasterizer state's stencil is set to always pass or fail based on if the stencil
// should be cleared or not with a stencil write mask of the stencil clear value.
//
// ======================================================================================
//
// Luckily, the gl spec (ES 3.0.2 pg 183) states that the results of clearing a render-
// buffer that is not normalized fixed point or floating point with floating point values
// are undefined so we can just write floats to them and D3D11 will bit cast them to
// integers.
//
// Also, we don't have to worry about attempting to clear a normalized fixed/floating point
// buffer with integer values because there is no gl API call which would allow it,
// glClearBuffer* calls only clear a single renderbuffer at a time which is verified to
// be a compatible clear type.
// Bind all the render targets which need clearing
ASSERT(maskedClearRenderTargets.size() <= mRenderer->getRendererCaps().maxDrawBuffers);
std::vector<ID3D11RenderTargetView*> rtvs(maskedClearRenderTargets.size());
for (unsigned int i = 0; i < maskedClearRenderTargets.size(); i++)
{
RenderTarget11 *renderTarget = maskedClearRenderTargets[i].renderTarget;
ID3D11RenderTargetView *rtv = renderTarget->getRenderTargetView();
if (!rtv)
{
return gl::Error(GL_OUT_OF_MEMORY, "Internal render target view pointer unexpectedly null.");
}
rtvs[i] = rtv;
}
ID3D11DepthStencilView *dsv = maskedClearDepthStencil ? maskedClearDepthStencil->getDepthStencilView() : nullptr;
ID3D11BlendState *blendState = getBlendState(maskedClearRenderTargets);
const FLOAT blendFactors[4] = { 1.0f, 1.0f, 1.0f, 1.0f };
const UINT sampleMask = 0xFFFFFFFF;
ID3D11DepthStencilState *dsState = getDepthStencilState(clearParams);
const UINT stencilClear = clearParams.stencilClearValue & 0xFF;
// Set the vertices
UINT vertexStride = 0;
const UINT startIdx = 0;
ClearShader *shader = nullptr;
D3D11_MAPPED_SUBRESOURCE mappedResource;
HRESULT result = deviceContext->Map(mVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource);
if (FAILED(result))
{
return gl::Error(GL_OUT_OF_MEMORY, "Failed to map internal masked clear vertex buffer, HRESULT: 0x%X.", result);
}
const gl::Rectangle *scissorPtr = clearParams.scissorEnabled ? &clearParams.scissor : nullptr;
switch (clearParams.colorClearType)
{
case GL_FLOAT:
ApplyVertices(framebufferSize, scissorPtr, clearParams.colorFClearValue, clearParams.depthClearValue, mappedResource.pData);
vertexStride = sizeof(d3d11::PositionDepthColorVertex<float>);
shader = mFloatClearShader;
break;
case GL_UNSIGNED_INT:
ApplyVertices(framebufferSize, scissorPtr, clearParams.colorUIClearValue, clearParams.depthClearValue, mappedResource.pData);
vertexStride = sizeof(d3d11::PositionDepthColorVertex<unsigned int>);
shader = mUintClearShader;
break;
case GL_INT:
ApplyVertices(framebufferSize, scissorPtr, clearParams.colorIClearValue, clearParams.depthClearValue, mappedResource.pData);
vertexStride = sizeof(d3d11::PositionDepthColorVertex<int>);
shader = mIntClearShader;
break;
default:
UNREACHABLE();
break;
}
deviceContext->Unmap(mVertexBuffer, 0);
// Set the viewport to be the same size as the framebuffer
D3D11_VIEWPORT viewport;
viewport.TopLeftX = 0;
viewport.TopLeftY = 0;
viewport.Width = static_cast<FLOAT>(framebufferSize.width);
viewport.Height = static_cast<FLOAT>(framebufferSize.height);
viewport.MinDepth = 0;
viewport.MaxDepth = 1;
deviceContext->RSSetViewports(1, &viewport);
// Apply state
deviceContext->OMSetBlendState(blendState, blendFactors, sampleMask);
deviceContext->OMSetDepthStencilState(dsState, stencilClear);
deviceContext->RSSetState(mRasterizerState);
// Apply shaders
deviceContext->IASetInputLayout(shader->inputLayout->resolve(device));
deviceContext->VSSetShader(shader->vertexShader.resolve(device), nullptr, 0);
deviceContext->PSSetShader(shader->pixelShader.resolve(device), nullptr, 0);
deviceContext->GSSetShader(nullptr, nullptr, 0);
// Apply vertex buffer
deviceContext->IASetVertexBuffers(0, 1, &mVertexBuffer, &vertexStride, &startIdx);
deviceContext->IASetPrimitiveTopology(D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP);
// Apply render targets
mRenderer->getStateManager()->setOneTimeRenderTargets(rtvs, dsv);
// Draw the clear quad
deviceContext->Draw(4, 0);
// Clean up
mRenderer->markAllStateDirty();
}
return gl::Error(GL_NO_ERROR);
}