int PCBNEW_CONTROL::PanControl( const TOOL_EVENT& aEvent )
{
    long type = aEvent.Parameter<long>();
    KIGFX::VIEW* view = getView();
    GRID_HELPER gridHelper( m_frame );
    VECTOR2D center = view->GetCenter();
    VECTOR2I gridSize = gridHelper.GetGrid() * 10;

    switch( type )
    {
        case COMMON_ACTIONS::CURSOR_UP:
            center -= VECTOR2D( 0, gridSize.y );
            break;

        case COMMON_ACTIONS::CURSOR_DOWN:
            center += VECTOR2D( 0, gridSize.y );
            break;

        case COMMON_ACTIONS::CURSOR_LEFT:
            center -= VECTOR2D( gridSize.x, 0 );
            break;

        case COMMON_ACTIONS::CURSOR_RIGHT:
            center += VECTOR2D( gridSize.x, 0 );
            break;

        default:
            assert( false );
            break;
    }

    view->SetCenter( center );

    return 0;
}
int PCBNEW_CONTROL::ZoomFitScreen( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = getView();
    EDA_DRAW_PANEL_GAL* galCanvas = m_frame->GetGalCanvas();
    BOARD* board = getModel<BOARD>();
    board->ComputeBoundingBox();

    BOX2I boardBBox = board->ViewBBox();
    VECTOR2D scrollbarSize = VECTOR2D( galCanvas->GetSize() - galCanvas->GetClientSize() );
    VECTOR2D screenSize = view->ToWorld( galCanvas->GetClientSize(), false );

    if( boardBBox.GetWidth() == 0 || boardBBox.GetHeight() == 0 )
    {
        // Empty view
        view->SetScale( 17.0 );     // works fine for the standard worksheet frame

        view->SetCenter( screenSize / 2.0 );
    }
    else
    {
        VECTOR2D vsize = boardBBox.GetSize();
        double scale = view->GetScale() / std::max( fabs( vsize.x / screenSize.x ),
                                                    fabs( vsize.y / screenSize.y ) );

        view->SetScale( scale );
        view->SetCenter( boardBBox.Centre() );
    }


    // Take scrollbars into account
    VECTOR2D worldScrollbarSize = view->ToWorld( scrollbarSize, false );
    view->SetCenter( view->GetCenter() + worldScrollbarSize / 2.0 );

    return 0;
}
int PCBNEW_CONTROL::ZoomPreset( const TOOL_EVENT& aEvent )
{
    unsigned int idx = aEvent.Parameter<long>();
    std::vector<double>& zoomList = m_frame->GetScreen()->m_ZoomList;
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    KIGFX::GAL* gal = m_frame->GetGalCanvas()->GetGAL();

    m_frame->SetPresetZoom( idx );

    if( idx == 0 )      // Zoom Auto
    {
        return ZoomFitScreen( aEvent );
    }
    else if( idx >= zoomList.size() )
    {
        assert( false );
        return 0;
    }

    double selectedZoom = zoomList[idx];
    double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
    view->SetScale( 1.0 / ( zoomFactor * selectedZoom ) );

    return 0;
}
/* Handles the selection of tools, menu, and popup menu commands.
 */
void PL_EDITOR_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
    cmd.SetEventObject( this );

    switch( event.GetId() )
    {
    case wxID_PREFERENCES:
        ShowPreferences( PlEditorHotkeysDescr, PlEditorHotkeysDescr, wxT( "pl_editor" ) );
        break;

    case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
        DisplayHotkeyList( this, PlEditorHotkeysDescr );
        break;

    case ID_SELECT_PAGE_NUMBER:
    {
        KIGFX::VIEW* view = GetGalCanvas()->GetView();
        view->SetLayerVisible( LAYER_WORKSHEET_PAGE1, m_pageSelectBox->GetSelection() == 0 );
        view->SetLayerVisible( LAYER_WORKSHEET_PAGEn, m_pageSelectBox->GetSelection() == 1 );
        m_canvas->Refresh();
    }
        break;

    default:
        wxMessageBox( wxT( "PL_EDITOR_FRAME::Process_Special_Functions error" ) );
        break;
    }
}
/*
 * Update variables with new options
 */
bool PANEL_PCBNEW_DISPLAY_OPTIONS::TransferDataFromWindow()
{
    PCB_DISPLAY_OPTIONS* displ_opts = (PCB_DISPLAY_OPTIONS*) m_frame->GetDisplayOptions();

    displ_opts->m_ShowTrackClearanceMode = UTIL::GetValFromConfig(
            traceClearanceSelectMap, m_OptDisplayTracksClearance->GetSelection() );

    displ_opts->m_DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
    displ_opts->m_DisplayPadNum = m_OptDisplayPadNumber->GetValue();

    m_frame->SetElementVisibility( LAYER_NO_CONNECTS, m_OptDisplayPadNoConn->GetValue() );

    displ_opts->m_DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();

    displ_opts->m_DisplayRatsnestLinesCurved = m_OptDisplayCurvedRatsnestLines->GetValue();

    m_galOptsPanel->TransferDataFromWindow();

    // Apply changes to the GAL
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    KIGFX::PCB_PAINTER* painter = static_cast<KIGFX::PCB_PAINTER*>( view->GetPainter() );
    KIGFX::PCB_RENDER_SETTINGS* settings = painter->GetSettings();
    settings->LoadDisplayOptions( displ_opts, m_frame->ShowPageLimits() );
    view->RecacheAllItems();
    view->MarkTargetDirty( KIGFX::TARGET_NONCACHED );

    m_frame->GetCanvas()->Refresh();

    return true;
}
int PCBNEW_CONTROL::ZoomCenter( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    view->SetCenter( getViewControls()->GetCursorPosition() );

    return 0;
}
bool InvokeDXFDialogBoardImport( PCB_BASE_FRAME* aCaller )
{
    DIALOG_DXF_IMPORT dlg( aCaller );
    bool success = ( dlg.ShowModal() == wxID_OK );

    if( success )
    {
        const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
        PICKED_ITEMS_LIST picklist;

        BOARD* board = aCaller->GetBoard();
        KIGFX::VIEW* view = aCaller->GetGalCanvas()->GetView();

        std::list<BOARD_ITEM*>::const_iterator it, itEnd;
        for( it = list.begin(), itEnd = list.end(); it != itEnd; ++it )
        {
            BOARD_ITEM* item = *it;
            board->Add( item );

            ITEM_PICKER itemWrapper( item, UR_NEW );
            picklist.PushItem( itemWrapper );

            if( aCaller->IsGalCanvasActive() )
                view->Add( item );
        }

        aCaller->SaveCopyInUndoList( picklist, UR_NEW, wxPoint( 0, 0 ) );
        aCaller->OnModify();
    }

    return success;
}
Esempio n. 8
0
void PCB_LAYER_WIDGET::OnRenderColorChange( int aId, COLOR4D aColor )
{
    wxASSERT( aId > GAL_LAYER_ID_START && aId < GAL_LAYER_ID_END );

    myframe->Settings().Colors().SetItemColor( static_cast<GAL_LAYER_ID>( aId ), aColor );

    EDA_DRAW_PANEL_GAL* galCanvas = myframe->GetGalCanvas();

    if( galCanvas && myframe->IsGalCanvasActive() )
    {
        if( aId == LAYER_GRID )
            galCanvas->GetGAL()->SetGridColor( aColor );

        KIGFX::VIEW* view = galCanvas->GetView();
        view->GetPainter()->GetSettings()->ImportLegacyColors( &myframe->Settings().Colors() );
        view->MarkTargetDirty( KIGFX::TARGET_NONCACHED );   // useful to update rastnest
        view->UpdateLayerColor( aId );

        // plated-through-holes don't have their own color; they use the background color
        if( aId == LAYER_PCB_BACKGROUND )
            view->UpdateLayerColor( LAYER_PADS_PLATEDHOLES );

        galCanvas->ForceRefresh();
    }

    myframe->ReCreateHToolbar();

    myframe->GetCanvas()->Refresh();
}
Esempio n. 9
0
void PCB_LAYER_WIDGET::OnLayerColorChange( int aLayer, COLOR4D aColor )
{
    // Avoid setting the alpha channel, when we are in legacy mode,
    // because in legacy mode the alpha channel is not used, but changing it
    // destroys the GAL color setup
    if( !myframe->IsGalCanvasActive() )
    {
        COLOR4D oldColor = myframe->Settings().Colors().GetLayerColor( aLayer );
        aColor.a = oldColor.a;
    }

    myframe->Settings().Colors().SetLayerColor( aLayer, aColor );

    if( myframe->IsGalCanvasActive() )
    {
        KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
        view->GetPainter()->GetSettings()->ImportLegacyColors( &myframe->Settings().Colors() );
        view->UpdateLayerColor( aLayer );
        view->UpdateLayerColor( GetNetnameLayer( aLayer ) );
    }

    myframe->ReCreateHToolbar();

    myframe->GetCanvas()->Refresh();

    if( aLayer == LAYER_PCB_BACKGROUND )
        myframe->SetDrawBgColor( aColor );
}
bool InvokeDXFDialogModuleImport( PCB_BASE_FRAME* aCaller, MODULE* aModule )
{
    wxASSERT( aModule );

    DIALOG_DXF_IMPORT dlg( aCaller );
    bool success = ( dlg.ShowModal() == wxID_OK );

    if( success )
    {
        const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
        KIGFX::VIEW* view = aCaller->GetGalCanvas()->GetView();

        aCaller->SaveCopyInUndoList( aModule, UR_MODEDIT );
        aCaller->OnModify();

        std::list<BOARD_ITEM*>::const_iterator it, itEnd;
        for( it = list.begin(), itEnd = list.end(); it != itEnd; ++it )
        {
            BOARD_ITEM* item = *it;
            BOARD_ITEM* converted = NULL;

            // Modules use different types for the same things,
            // so we need to convert imported items to appropriate classes.
            switch( item->Type() )
            {
            case PCB_LINE_T:
            {
                converted = new EDGE_MODULE( aModule );
                *static_cast<DRAWSEGMENT*>( converted ) = *static_cast<DRAWSEGMENT*>( item );
                aModule->Add( converted );
                static_cast<EDGE_MODULE*>( converted )->SetLocalCoord();
                delete item;
                break;
            }

            case PCB_TEXT_T:
            {
                converted = new TEXTE_MODULE( aModule );
                *static_cast<TEXTE_PCB*>( converted ) = *static_cast<TEXTE_PCB*>( item );
                aModule->Add( converted );
                static_cast<TEXTE_MODULE*>( converted )->SetLocalCoord();
                delete item;
                break;
            }

            default:
                wxLogDebug( wxT( "type %d currently not handled" ), item->Type() );
                break;
            }

            if( aCaller->IsGalCanvasActive() && converted )
                view->Add( converted );
        }
    }

    return success;
}
void EDA_DRAW_FRAME::UseGalCanvas( bool aEnable )
{
    KIGFX::VIEW* view = GetGalCanvas()->GetView();
    KIGFX::GAL* gal = GetGalCanvas()->GetGAL();

    double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();

    // Display the same view after canvas switching
    if( aEnable )
    {
        BASE_SCREEN* screen = GetScreen();

        // Switch to GAL rendering
        if( !IsGalCanvasActive() )
        {
            // Set up viewport
            double zoom = 1.0 / ( zoomFactor * m_canvas->GetZoom() );
            view->SetScale( zoom );
            view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
        }

        // Set up grid settings
        gal->SetGridVisibility( IsGridVisible() );
        gal->SetGridSize( VECTOR2D( screen->GetGridSize().x, screen->GetGridSize().y ) );
        gal->SetGridOrigin( VECTOR2D( GetGridOrigin() ) );
    }
    else
    {
        // Switch to standard rendering
        if( IsGalCanvasActive() )
        {
            // Change view settings only if GAL was active previously
            double zoom = 1.0 / ( zoomFactor * view->GetScale() );
            m_canvas->SetZoom( zoom );

            VECTOR2D center = view->GetCenter();
            RedrawScreen( wxPoint( center.x, center.y ), false );
        }
    }

    m_canvas->SetEvtHandlerEnabled( !aEnable );
    GetGalCanvas()->SetEvtHandlerEnabled( aEnable );

    // Switch panes
    m_auimgr.GetPane( wxT( "DrawFrame" ) ).Show( !aEnable );
    m_auimgr.GetPane( wxT( "DrawFrameGal" ) ).Show( aEnable );
    m_auimgr.Update();

    // Reset current tool on switch();
    SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    m_galCanvasActive = aEnable;
}
void PCB_LAYER_WIDGET::OnLayerColorChange( int aLayer, EDA_COLOR_T aColor )
{
    myframe->GetBoard()->SetLayerColor( ToLAYER_ID( aLayer ), aColor );

    if( myframe->IsGalCanvasActive() )
    {
        KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
        view->GetPainter()->GetSettings()->ImportLegacyColors( myframe->GetBoard()->GetColorsSettings() );
        view->UpdateLayerColor( aLayer );
    }

    myframe->GetCanvas()->Refresh();
}
Esempio n. 13
0
void EDA_DRAW_FRAME::UseGalCanvas( bool aEnable )
{
    KIGFX::VIEW* view = GetGalCanvas()->GetView();
    KIGFX::GAL* gal = GetGalCanvas()->GetGAL();

    // Display the same view after canvas switching
    if( aEnable )
    {
        // Switch to GAL renderer from legacy
        if( !m_galCanvasActive )
        {
            // Set up viewport
            double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
            double zoom = 1.0 / ( zoomFactor * m_canvas->GetZoom() );
            view->SetScale( zoom );
            view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
        }

        // Set up grid settings
        gal->SetGridVisibility( IsGridVisible() );
        gal->SetGridSize( VECTOR2D( GetScreen()->GetGridSize() ) );
        gal->SetGridOrigin( VECTOR2D( GetGridOrigin() ) );

        // Transfer EDA_DRAW_PANEL settings
        GetGalCanvas()->GetViewControls()->EnableCursorWarping( !m_canvas->GetEnableZoomNoCenter() );
        GetGalCanvas()->GetViewControls()->EnableMousewheelPan( m_canvas->GetEnableMousewheelPan() );
        GetGalCanvas()->GetViewControls()->EnableAutoPan( m_canvas->GetEnableAutoPan() );
    }
    else if( m_galCanvasActive )
    {
        // Switch to legacy renderer from GAL
        double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
        // TODO replace it with EDA_DRAW_PANEL_GAL::GetLegacyZoom
        m_canvas->SetZoom( 1.0 / ( zoomFactor * view->GetScale() ) );
        VECTOR2D center = view->GetCenter();
        AdjustScrollBars( wxPoint( center.x, center.y ) );
    }

    m_canvas->SetEvtHandlerEnabled( !aEnable );
    GetGalCanvas()->SetEvtHandlerEnabled( aEnable );

    // Switch panes
    m_auimgr.GetPane( wxT( "DrawFrame" ) ).Show( !aEnable );
    m_auimgr.GetPane( wxT( "DrawFrameGal" ) ).Show( aEnable );
    m_auimgr.Update();

    // Reset current tool on switch();
    SetNoToolSelected();

    m_galCanvasActive = aEnable;
}
int PCBNEW_CONTROL::ZoomInOutCenter( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = getView();
    double zoomScale = 1.0;

    if( aEvent.IsAction( &COMMON_ACTIONS::zoomInCenter ) )
        zoomScale = 1.3;
    else if( aEvent.IsAction( &COMMON_ACTIONS::zoomOutCenter ) )
        zoomScale = 0.7;

    view->SetScale( view->GetScale() * zoomScale );

    return 0;
}
int PCBNEW_CONTROL::ZoomInOut( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    double zoomScale = 1.0;

    if( aEvent.IsAction( &COMMON_ACTIONS::zoomIn ) )
        zoomScale = 1.3;
    else if( aEvent.IsAction( &COMMON_ACTIONS::zoomOut ) )
        zoomScale = 0.7;

    view->SetScale( view->GetScale() * zoomScale, getViewControls()->GetCursorPosition() );

    return 0;
}
void GERBER_LAYER_WIDGET::OnLayerColorChange( int aLayer, COLOR4D aColor )
{
    // NOTE: Active layer in GerbView is stored as 0-indexed, but layer color is
    //       stored according to the GERBER_DRAW_LAYER() offset.

    myframe->SetLayerColor( GERBER_DRAW_LAYER( aLayer ), aColor );
    myframe->m_SelLayerBox->ResyncBitmapOnly();

    if( myframe->IsGalCanvasActive() )
    {
        KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
        view->GetPainter()->GetSettings()->ImportLegacyColors( myframe->m_colorsSettings );
        view->UpdateLayerColor( GERBER_DRAW_LAYER( aLayer ) );
    }

    myframe->GetCanvas()->Refresh();
}
Esempio n. 17
0
void PCB_EDIT_FRAME::syncLayerVisibilities()
{
    m_Layers->SyncLayerVisibilities();

    KIGFX::VIEW* view = GetGalCanvas()->GetView();

    // Load layer & elements visibility settings
    for( LAYER_NUM i = 0; i < NB_LAYERS; ++i )
    {
        view->SetLayerVisible( i, m_Pcb->IsLayerVisible( i ) );

        // Synchronize netname layers as well
        if( IsCopperLayer( i ) )
            view->SetLayerVisible( GetNetnameLayer( i ), m_Pcb->IsLayerVisible( i ) );
    }

    for( LAYER_NUM i = 0; i < END_PCB_VISIBLE_LIST; ++i )
    {
        view->SetLayerVisible( ITEM_GAL_LAYER( i ), m_Pcb->IsElementVisible( i ) );
    }

    // Enable some layers that are GAL specific
    view->SetLayerVisible( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), true );
    view->SetLayerVisible( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), true );
    view->SetLayerVisible( ITEM_GAL_LAYER( WORKSHEET ), true );
    view->SetLayerVisible( ITEM_GAL_LAYER( GP_OVERLAY ), true );
}
void FOOTPRINT_EDIT_FRAME::RestoreCopyFromUndoList( wxCommandEvent& aEvent )
{
    if( UndoRedoBlocked() )
        return;

    if( GetScreen()->GetUndoCommandCount() <= 0 )
        return;

    // Inform tools that undo command was issued
    TOOL_EVENT event( TC_MESSAGE, TA_UNDO_REDO, AS_GLOBAL );
    m_toolManager->ProcessEvent( event );

    if( UndoRedoBlocked() )
        return;

    // Save current module state in redo list
    PICKED_ITEMS_LIST* lastcmd = new PICKED_ITEMS_LIST();
    MODULE* module = GetBoard()->m_Modules.PopFront();
    ITEM_PICKER wrapper( module, UR_MODEDIT );
    KIGFX::VIEW* view = GetGalCanvas()->GetView();
    lastcmd->PushItem( wrapper );
    GetScreen()->PushCommandToRedoList( lastcmd );

    view->Remove( module );
    module->RunOnChildren( std::bind( &KIGFX::VIEW::Remove, view, _1 ) );

    // Retrieve last module state from undo list
    lastcmd = GetScreen()->PopCommandFromUndoList();
    wrapper = lastcmd->PopItem();
    module = (MODULE*) wrapper.GetItem();
    delete lastcmd;

    if( module )
    {
        GetBoard()->Add( module, ADD_APPEND );
        view->Add( module );
        module->RunOnChildren( std::bind( &KIGFX::VIEW::Add, view, _1 ) );
        module->ViewUpdate();
    }

    SetCurItem( NULL );

    OnModify();
    m_canvas->Refresh();
}
Esempio n. 19
0
int PCBNEW_CONTROL::ZoomInOutCenter( TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    KIGFX::GAL* gal = m_frame->GetGalCanvas()->GetGAL();

    if( aEvent.IsAction( &COMMON_ACTIONS::zoomInCenter ) )
        m_frame->SetPrevZoom();
    else if( aEvent.IsAction( &COMMON_ACTIONS::zoomOutCenter ) )
        m_frame->SetNextZoom();

    double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
    double zoom = 1.0 / ( zoomFactor * m_frame->GetZoom() );

    view->SetScale( zoom );
    setTransitions();

    return 0;
}
Esempio n. 20
0
void EDIT_TOOL::processChanges( const PICKED_ITEMS_LIST* aList )
{
    KIGFX::VIEW* view = getView();
    RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();

    for( unsigned int i = 0; i < aList->GetCount(); ++i )
    {
        UNDO_REDO_T operation = aList->GetPickedItemStatus( i );
        BOARD_ITEM* updItem = static_cast<BOARD_ITEM*>( aList->GetPickedItem( i ) );

        switch( operation )
        {
        case UR_CHANGED:
            ratsnest->Update( updItem );
            // fall through

        case UR_MODEDIT:
            updItem->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            break;

        case UR_DELETED:
            if( updItem->Type() == PCB_MODULE_T )
                static_cast<MODULE*>( updItem )->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove,
                                                                             view, _1 ) );

            view->Remove( updItem );
            //ratsnest->Remove( updItem );  // this is done in BOARD::Remove
            break;

        case UR_NEW:
            if( updItem->Type() == PCB_MODULE_T )
                static_cast<MODULE*>( updItem )->RunOnChildren( boost::bind( &KIGFX::VIEW::Add,
                                                                             view, _1 ) );

            view->Add( updItem );
            //ratsnest->Add( updItem );     // this is done in BOARD::Add
            break;

        default:
            assert( false );    // Not handled
            break;
        }
    }
}
Esempio n. 21
0
void PCB_EDIT_FRAME::setHighContrastLayer( LAYER_NUM aLayer )
{
    // Set display settings for high contrast mode
    KIGFX::VIEW* view = GetGalCanvas()->GetView();
    KIGFX::RENDER_SETTINGS* rSettings = view->GetPainter()->GetSettings();

    setTopLayer( aLayer );

    rSettings->ClearActiveLayers();
    rSettings->SetActiveLayer( aLayer );

    if( IsCopperLayer( aLayer ) )
    {
        // Bring some other layers to the front in case of copper layers and make them colored
        // fixme do not like the idea of storing the list of layers here,
        // should be done in some other way I guess..
        LAYER_NUM layers[] = {
            GetNetnameLayer( aLayer ), ITEM_GAL_LAYER( VIAS_VISIBLE ),
            ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
            ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
            ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE )
        };

        for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
            rSettings->SetActiveLayer( layers[i] );

        // Pads should be shown too
        if( aLayer == FIRST_COPPER_LAYER )
        {
            rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
            rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ) );
        }
        else if( aLayer == LAST_COPPER_LAYER )
        {
            rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
            rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ) );
        }
    }

    view->UpdateAllLayersColor();
}
void PCB_LAYER_WIDGET::OnLayerVisible( int aLayer, bool isVisible, bool isFinal )
{
    BOARD* brd = myframe->GetBoard();

    LSET visibleLayers = brd->GetVisibleLayers();

    visibleLayers.set( aLayer, isVisible );

    brd->SetVisibleLayers( visibleLayers );

    EDA_DRAW_PANEL_GAL* galCanvas = myframe->GetGalCanvas();
    if( galCanvas )
    {
        KIGFX::VIEW* view = galCanvas->GetView();
        view->SetLayerVisible( aLayer, isVisible );
        view->RecacheAllItems( true );
    }

    if( isFinal )
        myframe->GetCanvas()->Refresh();
}
int PCBNEW_CONTROL::ZoomFitScreen( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    KIGFX::GAL* gal = m_frame->GetGalCanvas()->GetGAL();
    BOARD* board = getModel<BOARD>();
    board->ComputeBoundingBox();
    BOX2I boardBBox = board->ViewBBox();
    VECTOR2I screenSize = gal->GetScreenPixelSize();

    if( boardBBox.GetSize().x == 0 || boardBBox.GetSize().y == 0 )
    {
        // Empty view
        view->SetCenter( view->ToWorld( VECTOR2D( screenSize.x / 2, screenSize.y / 2 ) ) );
        view->SetScale( 17.0 );
    }
    else
    {
        // Autozoom to board
        double iuPerX = screenSize.x ? boardBBox.GetWidth() / screenSize.x : 1.0;
        double iuPerY = screenSize.y ? boardBBox.GetHeight() / screenSize.y : 1.0;

        double bestZoom = std::max( iuPerX, iuPerY );
        double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
        double zoom = 1.0 / ( zoomFactor * bestZoom );

        view->SetCenter( boardBBox.Centre() );
        view->SetScale( zoom );
    }

    return 0;
}
void EDA_DRAW_FRAME::OnSelectZoom( wxCommandEvent& event )
{
    if( m_zoomSelectBox == NULL )
        return;                        // Should not happen!

    int id = m_zoomSelectBox->GetCurrentSelection();

    if( id < 0 || !( id < (int)m_zoomSelectBox->GetCount() ) )
        return;

    if( id == 0 )                      // Auto zoom (Fit in Page)
    {
        Zoom_Automatique( true );
    }
    else
    {
        id--;
        double selectedZoom = GetScreen()->m_ZoomList[id];

        if( GetScreen()->GetZoom() == selectedZoom )
            return;

        GetScreen()->SetZoom( selectedZoom );

        if( IsGalCanvasActive() )
        {
            // Apply computed view settings to GAL
            KIGFX::VIEW* view = GetGalCanvas()->GetView();
            KIGFX::GAL* gal = GetGalCanvas()->GetGAL();

            double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
            double zoom = 1.0 / ( zoomFactor * GetZoom() );

            view->SetScale( zoom );
            GetGalCanvas()->Refresh();
        }
        else
            RedrawScreen( GetScrollCenterPosition(), false );
    }
}
Esempio n. 25
0
const wxString EDA_DRAW_FRAME::GetZoomLevelIndicator() const
{
    wxString Line;
    double level = 0.0;

    if( IsGalCanvasActive() )
    {
        KIGFX::GAL* gal = m_galCanvas->GetGAL();
        KIGFX::VIEW* view = m_galCanvas->GetView();
        double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
        level = m_zoomLevelCoeff * zoomFactor * view->GetScale();
    }
    else if( BASE_SCREEN* screen = GetScreen() )
    {
        level = m_zoomLevelCoeff / (double) screen->GetZoom();
    }

    // returns a human readable value which can be displayed as zoom
    // level indicator in dialogs.
    Line.Printf( wxT( "Z %.2f" ), level );

    return Line;
}
void PCB_LAYER_WIDGET::OnLayerVisible( LAYER_NUM aLayer, bool isVisible, bool isFinal )
{
    BOARD* brd = myframe->GetBoard();

    LAYER_MSK visibleLayers = brd->GetVisibleLayers();

    if( isVisible )
        visibleLayers |= GetLayerMask( aLayer );
    else
        visibleLayers &= ~GetLayerMask( aLayer );

    brd->SetVisibleLayers( visibleLayers );

    EDA_DRAW_PANEL_GAL* galCanvas = myframe->GetGalCanvas();
    if( galCanvas )
    {
        KIGFX::VIEW* view = galCanvas->GetView();
        view->SetLayerVisible( aLayer, isVisible );
    }

    if( isFinal )
        myframe->GetCanvas()->Refresh();
}
Esempio n. 27
0
int PCBNEW_CONTROL::ZoomFitScreen( TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
    KIGFX::GAL* gal = m_frame->GetGalCanvas()->GetGAL();
    BOX2I boardBBox  = getModel<BOARD>( PCB_T )->ViewBBox();
    VECTOR2I screenSize = gal->GetScreenPixelSize();

    double iuPerX = screenSize.x ? boardBBox.GetWidth() / screenSize.x : 1.0;
    double iuPerY = screenSize.y ? boardBBox.GetHeight() / screenSize.y : 1.0;

    double bestZoom = std::max( iuPerX, iuPerY );
    // This is needed to avoid "jumpy" zooms if first hot key was used and then mouse scroll
    // (or other way round).
    m_frame->GetScreen()->SetZoom( bestZoom );

    double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
    double zoom = 1.0 / ( zoomFactor * bestZoom );

    view->SetScale( zoom );
    view->SetCenter( boardBBox.Centre() );
    setTransitions();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneMerge( const TOOL_EVENT& aEvent )
{
    SELECTION selection = m_toolMgr->GetTool<SELECTION_TOOL>()->GetSelection();
    BOARD* board = getModel<BOARD>();
    RN_DATA* ratsnest = board->GetRatsnest();
    KIGFX::VIEW* view = getView();

    if( selection.Size() < 2 )
        return 0;

    PICKED_ITEMS_LIST changes;
    int netcode = -1;

    // Loop through all combinations
    for( int ia1 = 0; ia1 < selection.Size() - 1; ++ia1 )
    {
        ZONE_CONTAINER* curr_area = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia1 ) );

        if( !curr_area )
            continue;

        netcode = curr_area->GetNetCode();

        EDA_RECT b1 = curr_area->Outline()->GetBoundingBox();
        bool mod_ia1 = false;

        for( int ia2 = selection.Size() - 1; ia2 > ia1; --ia2 )
        {
            ZONE_CONTAINER* area2 = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia2 ) );

            if( !area2 )
                continue;

            if( area2->GetNetCode() != netcode )
                continue;

            if( curr_area->GetPriority() != area2->GetPriority() )
                continue;

            if( curr_area->GetIsKeepout() != area2->GetIsKeepout() )
                continue;

            if( curr_area->GetLayer() != area2->GetLayer() )
                continue;

            EDA_RECT b2 = area2->Outline()->GetBoundingBox();

            if( b1.Intersects( b2 ) )
            {
                EDA_ITEM* backup = curr_area->Clone();
                bool ret = board->TestAreaIntersection( curr_area, area2 );

                if( ret && board->CombineAreas( &changes, curr_area, area2 ) )
                {
                    mod_ia1 = true;
                    selection.items.RemovePicker( ia2 );

                    ITEM_PICKER picker( curr_area, UR_CHANGED );
                    picker.SetLink( backup );
                    changes.PushItem( picker );
                }
                else
                {
                    delete backup;
                }
            }
        }

        if( mod_ia1 )
            --ia1;     // if modified, we need to check it again
    }

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_frame->SaveCopyInUndoList( changes, UR_UNSPECIFIED );

    for( unsigned i = 0; i < changes.GetCount(); ++i )
    {
        ITEM_PICKER picker = changes.GetItemWrapper( i );
        BOARD_ITEM* item = static_cast<BOARD_ITEM*>( picker.GetItem() );

        if( picker.GetStatus() == UR_DELETED )
        {
            view->Remove( item );
            ratsnest->Remove( item );
        }
        else if( picker.GetStatus() == UR_CHANGED )
        {
            item->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
            m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, item );
        }
    }

    return 0;
}
int PCB_EDITOR_CONTROL::PlaceTarget( const TOOL_EVENT& aEvent )
{
    KIGFX::VIEW* view = getView();
    KIGFX::VIEW_CONTROLS* controls = getViewControls();
    BOARD* board = getModel<BOARD>();
    PCB_TARGET* target = new PCB_TARGET( board );

    // Init the new item attributes
    target->SetLayer( Edge_Cuts );
    target->SetWidth( board->GetDesignSettings().m_EdgeSegmentWidth );
    target->SetSize( Millimeter2iu( 5 ) );
    VECTOR2I cursorPos = controls->GetCursorPosition();
    target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( view );
    preview.Add( target );
    view->Add( &preview );
    preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    controls->SetSnapping( true );

    Activate();
    m_frame->SetToolID( ID_PCB_MIRE_BUTT, wxCURSOR_PENCIL, _( "Add layer alignment target" ) );

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        cursorPos = controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
            break;

        else if( evt->IsAction( &COMMON_ACTIONS::incWidth ) )
        {
            target->SetWidth( target->GetWidth() + WIDTH_STEP );
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }

        else if( evt->IsAction( &COMMON_ACTIONS::decWidth ) )
        {
            int width = target->GetWidth();

            if( width > WIDTH_STEP )
            {
                target->SetWidth( width - WIDTH_STEP );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            assert( target->GetSize() > 0 );
            assert( target->GetWidth() > 0 );

            view->Add( target );
            board->Add( target );
            target->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

            m_frame->OnModify();
            m_frame->SaveCopyInUndoList( target, UR_NEW );

            preview.Remove( target );

            // Create next PCB_TARGET
            target = new PCB_TARGET( *target );
            preview.Add( target );
        }

        else if( evt->IsMotion() )
        {
            target->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    delete target;

    controls->SetSnapping( false );
    view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}
int PCB_EDITOR_CONTROL::PlaceModule( const TOOL_EVENT& aEvent )
{
    MODULE* module = NULL;
    KIGFX::VIEW* view = getView();
    KIGFX::VIEW_CONTROLS* controls = getViewControls();
    BOARD* board = getModel<BOARD>();

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( view );
    view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    controls->ShowCursor( true );
    controls->SetSnapping( true );

    Activate();
    m_frame->SetToolID( ID_PCB_MODULE_BUTT, wxCURSOR_HAND, _( "Add footprint" ) );

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( module )
            {
                board->Delete( module );  // it was added by LoadModuleFromLibrary()
                module = NULL;

                preview.Clear();
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
                controls->ShowCursor( true );
            }
            else
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( module && evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                module->Rotate( module->GetPosition(), m_frame->GetRotationAngle() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                module->Flip( module->GetPosition() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            if( !module )
            {
                // Pick the module to be placed
                module = m_frame->LoadModuleFromLibrary( wxEmptyString,
                                                         m_frame->Prj().PcbFootprintLibs(),
                                                         true, NULL );
                if( module == NULL )
                    continue;

                module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );

                // Add all the drawable parts to preview
                preview.Add( module );
                module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );

                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else
            {
                // Place the selected module
                module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
                view->Add( module );
                module->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                m_frame->OnModify();
                m_frame->SaveCopyInUndoList( module, UR_NEW );

                // Remove from preview
                preview.Remove( module );
                module->RunOnChildren( boost::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
                module = NULL;  // to indicate that there is no module that we currently modify
            }

            bool placing = ( module != NULL );

            controls->SetAutoPan( placing );
            controls->CaptureCursor( placing );
            controls->ShowCursor( !placing );
        }

        else if( module && evt->IsMotion() )
        {
            module->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    controls->ShowCursor( false );
    controls->SetSnapping( false );
    controls->SetAutoPan( false );
    controls->CaptureCursor( false );
    view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}