Esempio n. 1
0
bool MakeStep::init()
{
    Qt4BuildConfiguration *bc = qt4BuildConfiguration();
    if (!bc)
        bc = qobject_cast<Qt4BuildConfiguration *>(target()->activeBuildConfiguration());

    m_tasks.clear();
    if (!bc) {
        m_tasks.append(ProjectExplorer::Task(ProjectExplorer::Task::Error,
                                             tr("Qt Creator needs a build configuration set up to build. Configure a tool chain in Project mode."),
                                             Utils::FileName(), -1,
                                             Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
        return false;
    }

    ProjectExplorer::ToolChain *tc = ProjectExplorer::ToolChainProfileInformation::toolChain(target()->profile());
    if (!tc) {
        m_tasks.append(ProjectExplorer::Task(ProjectExplorer::Task::Error,
                                             tr("Qt Creator needs a tool chain set up to build. Configure a tool chain the profile options."),
                                             Utils::FileName(), -1,
                                             Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
        return false;
    }

    ProjectExplorer::ProcessParameters *pp = processParameters();
    pp->setMacroExpander(bc->macroExpander());

    QString workingDirectory;
    if (bc->subNodeBuild())
        workingDirectory = bc->subNodeBuild()->buildDir();
    else
        workingDirectory = bc->buildDirectory();
    pp->setWorkingDirectory(workingDirectory);

    QString makeCmd = tc->makeCommand();
    if (!m_makeCmd.isEmpty())
        makeCmd = m_makeCmd;
    pp->setCommand(makeCmd);

    // If we are cleaning, then make can fail with a error code, but that doesn't mean
    // we should stop the clean queue
    // That is mostly so that rebuild works on a already clean project
    setIgnoreReturnValue(m_clean);

    QString args;

    Qt4ProjectManager::Qt4ProFileNode *subNode = bc->subNodeBuild();
    if (subNode) {
        QString makefile = subNode->makefile();
        if (makefile.isEmpty())
            makefile = QLatin1String("Makefile");
        if (subNode->isDebugAndRelease()) {
            if (bc->buildType() == Qt4BuildConfiguration::Debug)
                makefile += QLatin1String(".Debug");
            else
                makefile += QLatin1String(".Release");
        }
        if (makefile != QLatin1String("Makefile")) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, makefile);
        }
        m_makeFileToCheck = QDir(workingDirectory).filePath(makefile);
    } else {
        if (!bc->makefile().isEmpty()) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, bc->makefile());
            m_makeFileToCheck = QDir(workingDirectory).filePath(bc->makefile());
        } else {
            m_makeFileToCheck = QDir(workingDirectory).filePath(QLatin1String("Makefile"));
        }
    }

    Utils::QtcProcess::addArgs(&args, m_userArgs);

    if (!isClean()) {
        if (!bc->defaultMakeTarget().isEmpty())
            Utils::QtcProcess::addArg(&args, bc->defaultMakeTarget());
    }

    if (bc->fileNodeBuild() && subNode) {
        QString objectsDir = subNode->objectsDirectory();
        if (objectsDir.isEmpty()) {
            objectsDir = subNode->buildDir(bc);
            if (subNode->isDebugAndRelease()) {
                if (bc->buildType() == Qt4BuildConfiguration::Debug)
                    objectsDir += QLatin1String("/debug");
                else
                    objectsDir += QLatin1String("/release");
            }
        }
        QString relObjectsDir = QDir(pp->workingDirectory()).relativeFilePath(objectsDir);
        if (!relObjectsDir.isEmpty())
            relObjectsDir += QLatin1Char('/');
        QString objectFile = relObjectsDir +
                QFileInfo(bc->fileNodeBuild()->path()).baseName() +
                subNode->objectExtension();
        Utils::QtcProcess::addArg(&args, objectFile);
    }
    Utils::Environment env = bc->environment();
    // Force output to english for the parsers. Do this here and not in the toolchain's
    // addToEnvironment() to not screw up the users run environment.
    env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
    // -w option enables "Enter"/"Leaving directory" messages, which we need for detecting the
    // absolute file path
    // doing this without the user having a way to override this is rather bad
    // so we only do it for unix and if the user didn't override the make command
    // but for now this is the least invasive change
    // We also prepend "L" to the MAKEFLAGS, so that nmake / jom are less verbose
    if (tc && m_makeCmd.isEmpty()) {
        if (tc->targetAbi().binaryFormat() != ProjectExplorer::Abi::PEFormat )
            Utils::QtcProcess::addArg(&args, QLatin1String("-w"));
        if (tc->targetAbi().os() == ProjectExplorer::Abi::WindowsOS
                && tc->targetAbi().osFlavor() != ProjectExplorer::Abi::WindowsMSysFlavor) {
            const QString makeFlags = QLatin1String("MAKEFLAGS");
            env.set(makeFlags, QLatin1Char('L') + env.value(makeFlags));
        }
    }

    pp->setEnvironment(env);
    pp->setArguments(args);

    ProjectExplorer::IOutputParser *parser = 0;
    QtSupport::BaseQtVersion *version = QtSupport::QtProfileInformation::qtVersion(target()->profile());
    if (version)
        parser = version->createOutputParser();
    if (parser)
        parser->appendOutputParser(new QtSupport::QtParser);
    else
        parser = new QtSupport::QtParser;
    if (tc)
        parser->appendOutputParser(tc->outputParser());

    parser->setWorkingDirectory(workingDirectory);

    setOutputParser(parser);

    m_scriptTarget = (static_cast<Qt4Project *>(bc->target()->project())->rootQt4ProjectNode()->projectType() == ScriptTemplate);

    return AbstractProcessStep::init();
}
Esempio n. 2
0
bool MakeStep::init()
{
    Qt4BuildConfiguration *bc = qt4BuildConfiguration();
    if (!bc)
        bc = qobject_cast<Qt4BuildConfiguration *>(target()->activeBuildConfiguration());

    m_tasks.clear();
    ToolChain *tc = ToolChainKitInformation::toolChain(target()->kit());
    if (!tc) {
        m_tasks.append(Task(Task::Error, tr("Qt Creator needs a compiler set up to build. Configure a compiler in the kit options."),
                            Utils::FileName(), -1,
                            Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
        return true; // otherwise the tasks will not get reported
    }

    ProcessParameters *pp = processParameters();
    pp->setMacroExpander(bc->macroExpander());

    QString workingDirectory;
    if (bc->subNodeBuild())
        workingDirectory = bc->subNodeBuild()->buildDir();
    else
        workingDirectory = bc->buildDirectory();
    pp->setWorkingDirectory(workingDirectory);

    QString makeCmd = tc->makeCommand(bc->environment());
    if (!m_makeCmd.isEmpty())
        makeCmd = m_makeCmd;
    pp->setCommand(makeCmd);

    // If we are cleaning, then make can fail with a error code, but that doesn't mean
    // we should stop the clean queue
    // That is mostly so that rebuild works on a already clean project
    setIgnoreReturnValue(m_clean);

    QString args;

    Qt4ProjectManager::Qt4ProFileNode *subNode = bc->subNodeBuild();
    if (subNode) {
        QString makefile = subNode->makefile();
        if (makefile.isEmpty())
            makefile = QLatin1String("Makefile");
        // Use Makefile.Debug and Makefile.Release
        // for file builds, since the rules for that are
        // only in those files.
        if (subNode->isDebugAndRelease() && bc->fileNodeBuild()) {
            if (bc->buildType() == Qt4BuildConfiguration::Debug)
                makefile += QLatin1String(".Debug");
            else
                makefile += QLatin1String(".Release");
        }
        if (makefile != QLatin1String("Makefile")) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, makefile);
        }
        m_makeFileToCheck = QDir(workingDirectory).filePath(makefile);
    } else {
        if (!bc->makefile().isEmpty()) {
            Utils::QtcProcess::addArg(&args, QLatin1String("-f"));
            Utils::QtcProcess::addArg(&args, bc->makefile());
            m_makeFileToCheck = QDir(workingDirectory).filePath(bc->makefile());
        } else {
            m_makeFileToCheck = QDir(workingDirectory).filePath(QLatin1String("Makefile"));
        }
    }

    Utils::QtcProcess::addArgs(&args, m_userArgs);
    if (bc->fileNodeBuild() && subNode) {
        QString objectsDir = subNode->objectsDirectory();
        if (objectsDir.isEmpty()) {
            objectsDir = subNode->buildDir(bc);
            if (subNode->isDebugAndRelease()) {
                if (bc->buildType() == Qt4BuildConfiguration::Debug)
                    objectsDir += QLatin1String("/debug");
                else
                    objectsDir += QLatin1String("/release");
            }
        }
        QString relObjectsDir = QDir(pp->workingDirectory()).relativeFilePath(objectsDir);
        if (!relObjectsDir.isEmpty())
            relObjectsDir += QLatin1Char('/');
        QString objectFile = relObjectsDir +
                QFileInfo(bc->fileNodeBuild()->path()).baseName() +
                subNode->objectExtension();
        Utils::QtcProcess::addArg(&args, objectFile);
    }
    Utils::Environment env = bc->environment();
    // We also prepend "L" to the MAKEFLAGS, so that nmake / jom are less verbose
    if (tc && m_makeCmd.isEmpty()) {
        if (tc->targetAbi().os() == Abi::WindowsOS
                && tc->targetAbi().osFlavor() != Abi::WindowsMSysFlavor) {
            const QString makeFlags = QLatin1String("MAKEFLAGS");
            env.set(makeFlags, QLatin1Char('L') + env.value(makeFlags));
        }
    }

    pp->setEnvironment(env);
    pp->setArguments(args);
    pp->resolveAll();

    setOutputParser(new ProjectExplorer::GnuMakeParser());
    IOutputParser *parser = target()->kit()->createOutputParser();
    if (parser)
        appendOutputParser(parser);
    outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
    appendOutputParser(new QMakeParser); // make may cause qmake to be run, add last to make sure
                                         // it has a low priority.

    m_scriptTarget = (static_cast<Qt4Project *>(bc->target()->project())->rootQt4ProjectNode()->projectType() == ScriptTemplate);

    return AbstractProcessStep::init();
}