Esempio n. 1
0
void DFHack::Lua::Core::onUpdate(color_ostream &out)
{
    using df::global::world;

    if (frame_timers.empty() && tick_timers.empty())
        return;

    Lua::StackUnwinder frame(State);
    lua_rawgetp(State, LUA_REGISTRYINDEX, &DFHACK_TIMEOUTS_TOKEN);

    run_timers(out, State, frame_timers, frame[1], ++frame_idx);
    run_timers(out, State, tick_timers, frame[1], world->frame_counter);
}
Esempio n. 2
0
void setBarIndexes(
            std::multimap<ReducedFraction, MidiChord> &chords,
            const ReducedFraction &basicQuant,
            const ReducedFraction &lastTick,
            const TimeSigMap *sigmap)
      {
      if (chords.empty())
            return;
      auto it = chords.begin();
      for (int barIndex = 0;; ++barIndex) {       // iterate over all measures by indexes
            const auto endBarTick = ReducedFraction::fromTicks(sigmap->bar2tick(barIndex + 1, 0));
            if (endBarTick <= it->first)
                  continue;
            for (; it != chords.end(); ++it) {
                  const auto onTime = Quantize::findQuantizedChordOnTime(*it, basicQuant);
#ifdef QT_DEBUG
                  const auto barStart = ReducedFraction::fromTicks(sigmap->bar2tick(barIndex, 0));
                  Q_ASSERT_X(!(it->first >= barStart && onTime < barStart),
                             "MChord::setBarIndexes", "quantized on time cannot be in previous bar");
#endif
                  if (onTime < endBarTick) {
                        it->second.barIndex = barIndex;
                        continue;
                        }
                  break;
                  }
            if (it == chords.end() || endBarTick > lastTick)
                  break;
            }

      Q_ASSERT_X(areBarIndexesSet(chords),
                 "MChord::setBarIndexes", "Not all bar indexes were set");
      Q_ASSERT_X(areBarIndexesSuccessive(chords),
                 "MChord::setBarIndexes", "Bar indexes are not successive");
      }
Esempio n. 3
0
void GroupTransformer::putData(RddPartition* output,
    std::multimap<PbMessagePtr, PbMessagePtr, idgs::store::less>& localCache) {
  if (!localCache.empty()) {
    PbMessagePtr key;
    std::vector<PbMessagePtr> values;
    for (auto it = localCache.begin(); it != localCache.end(); ++it) {
      if (idgs::store::equals_to()(const_cast<PbMessagePtr&>(it->first), key)) {
        values.push_back(it->second);
      } else {
        if (!values.empty()) {
          output->put(key, values);
          values.clear();
        }
        values.clear();
        key = it->first;
        values.push_back(it->second);
      }
    }
    if (!values.empty()) {
      output->put(key, values);
      values.clear();
    }

    localCache.clear();
  }
}
Esempio n. 4
0
std::vector<std::multimap<ReducedFraction, MidiChord>::const_iterator>
findChordsForTimeRange(
            int voice,
            const ReducedFraction &onTime,
            const ReducedFraction &offTime,
            const std::multimap<ReducedFraction, MidiChord> &chords,
            const ReducedFraction &maxChordLength)
      {
      std::vector<std::multimap<ReducedFraction, MidiChord>::const_iterator> result;

      if (chords.empty())
            return result;

      auto it = chords.lower_bound(offTime);
      if (it == chords.begin())
            return result;
      --it;

      while (it->first + maxChordLength > onTime) {
            const MidiChord &chord = it->second;
            if (chord.voice == voice) {
                  const auto chordInterval = std::make_pair(it->first, maxNoteOffTime(chord.notes));
                  const auto durationInterval = std::make_pair(onTime, offTime);

                  if (MidiTuplet::haveIntersection(chordInterval, durationInterval))
                        result.push_back(it);
                  }
            if (it == chords.begin())
                  break;
            --it;
            }

      return result;
      }
Esempio n. 5
0
int tc_libcxx_containers_multimap_cons_compare(void)
{
    {
    typedef test_compare<std::less<int> > C;
    const std::multimap<int, double, C> m(C(3));
    TC_ASSERT_EXPR(m.empty());
    TC_ASSERT_EXPR(m.begin() == m.end());
    TC_ASSERT_EXPR(m.key_comp() == C(3));
    }
    TC_SUCCESS_RESULT();
    return 0;
}
Esempio n. 6
0
inline void operator<< (object::with_zone& o, const std::multimap<K,V>& v)
{
	o.type = type::MAP;
	if(v.empty()) {
		o.via.map.ptr  = NULL;
		o.via.map.size = 0;
	} else {
		object_kv* p = (object_kv*)o.zone->malloc(sizeof(object_kv)*v.size());
		object_kv* const pend = p + v.size();
		o.via.map.ptr  = p;
		o.via.map.size = v.size();
		typename std::multimap<K,V>::const_iterator it(v.begin());
		do {
			p->key = object(it->first, o.zone);
			p->val = object(it->second, o.zone);
			++p;
			++it;
		} while(p < pend);
	}
}
/**
 * @brief check if the order of execution of Actions in the List, based on their Precedence attribute, is correct and if in the List there are all the Actions
 */
bool ActionPluginFinalCallback::checkIfTheListIsCorrect(
		const std::multimap<int, Tuple>& multimapOfExecution,
		const std::list<std::set<Tuple> >& listOfExecution) {

	if (multimapOfExecution.empty())
		if (listOfExecution.empty())
			return true;
		else
			return false;

	// used to create a List (listOfExecutionFromMultimap)
	// with Tuples ordered by their Precedence attribute
	std::multimap<int, Tuple>::const_iterator itMOE =
			multimapOfExecution.begin();
	int latestPrecedenceValue = itMOE->first;
	std::list < std::set<Tuple> > listOfExecutionFromMultimap;
	std::set < Tuple > currentSet;
	for (; itMOE != multimapOfExecution.end(); itMOE++) {
		if (itMOE->first != latestPrecedenceValue) {
			listOfExecutionFromMultimap.push_back(currentSet);
			currentSet.clear();
			latestPrecedenceValue = itMOE->first;
		}
		currentSet.insert(itMOE->second);
	}
	listOfExecutionFromMultimap.push_back(currentSet);

	if (listOfExecution.size() != listOfExecutionFromMultimap.size())
		return false;

	std::list<std::set<Tuple> >::const_iterator itLOE, itLOEFM;
	for (itLOE = listOfExecution.begin(), itLOEFM =
			listOfExecutionFromMultimap.begin();
			itLOE != listOfExecution.end(), itLOEFM
					!= listOfExecutionFromMultimap.end(); itLOE++, itLOEFM++)
		if (!checkIfThisSetsOfTupleContainsTheSameElements(*itLOEFM, *itLOE))
			return false;

	return true;

}
Esempio n. 8
0
static void run_timers(color_ostream &out, lua_State *L,
                       std::multimap<int,int> &timers, int table, int bound)
{
    while (!timers.empty() && timers.begin()->first <= bound)
    {
        int id = timers.begin()->second;
        timers.erase(timers.begin());

        lua_rawgeti(L, table, id);

        if (lua_isnil(L, -1))
            lua_pop(L, 1);
        else
        {
            lua_pushnil(L);
            lua_rawseti(L, table, id);

            Lua::SafeCall(out, L, 0, 0);
        }
    }
}
    /**  advance in play loop by rtick_inc ticks, possibly generate some
     * csoundScoreEvent calls.
     */
    void step(MYFLT rtick_inc, MYFLT secs_per_tick , CSOUND * csound)
    {
        if (!playing) return;
        rtick += rtick_inc;
        int tick = (int)rtick % tickMax;
        if (tick == tick_prev) return;

        int events = 0;
        int loop0 = 0;
        int loop1 = 0;
        if (!ev.empty()) 
        {
            if (steps && (tick < tick_prev)) // should be true only after the loop wraps (not after insert)
            {
                while (ev_pos != ev.end())
                {
                    if (_debug && (VERBOSE > 3)) ev_pos->second->ev_print(_debug);
                    if (events < STEP_eventMax) ev_pos->second->event(csound, secs_per_tick);
                    ++ev_pos;
                    ++events;
                    ++loop0;
                }
                ev_pos = ev.begin();
            }
            while ((ev_pos != ev.end()) && (tick >= ev_pos->first))
            {
                if (_debug && (VERBOSE > 3)) ev_pos->second->ev_print(_debug);
                if (events < STEP_eventMax) ev_pos->second->event(csound, secs_per_tick);
                ++ev_pos;
                ++events;
                ++loop1;
            }
        }
        tick_prev = tick;
        if (_debug && (VERBOSE>1) && (events >= STEP_eventMax)) fprintf(_debug, "WARNING: %i/%i events at once (%i, %i)\n", events, (int)ev.size(),loop0,loop1);
        ++steps;
    }
Esempio n. 10
0
    // Only call on io_service
    void ResetTimer()
    {
        const auto now = std::chrono::steady_clock::now();

        UniqueLock unique_lock(mutex_);

        while (running_ && !data_.empty())
        {
            auto map_front_it = data_.begin();
            const auto timeout = map_front_it->first;
            if ( timeout <= now )
            {
                // Effeciently extract the value so we can move it.
                auto event = std::move( map_front_it->second );
                data_.erase(map_front_it);

                // Unlock incase callback calls a TimedActions method.
                unique_lock.unlock();
                event_processor_(std::move(event), std::error_code());
                unique_lock.lock();
            }
            else
            {
                timeout_timer_.expires_at(timeout);

                timeout_timer_.async_wait(
                    boost::bind(
                        &TimedEvents<Event>::HandleTimeout,
                        this->shared_from_this(),
                        boost::asio::placeholders::error
                    )
                );
                break;
            }
        }
    }
Esempio n. 11
0
/**
 * Return public keys or hashes from scriptPubKey, for 'standard' transaction types.
 */
bool Solver(const CScript& scriptPubKeyIn, txnouttype& typeRet, std::vector<std::vector<unsigned char> >& vSolutionsRet)
{
    // Templates
    static std::multimap<txnouttype, CScript> mTemplates;
    if (mTemplates.empty())
    {
        // Standard tx, sender provides pubkey, receiver adds signature
        mTemplates.insert(std::make_pair(TX_PUBKEY, CScript() << OP_PUBKEY << OP_CHECKSIG));

        // Syscoin address tx, sender provides hash of pubkey, receiver provides signature and pubkey
        mTemplates.insert(std::make_pair(TX_PUBKEYHASH, CScript() << OP_DUP << OP_HASH160 << OP_PUBKEYHASH << OP_EQUALVERIFY << OP_CHECKSIG));

        // Sender provides N pubkeys, receivers provides M signatures
        mTemplates.insert(std::make_pair(TX_MULTISIG, CScript() << OP_SMALLINTEGER << OP_PUBKEYS << OP_SMALLINTEGER << OP_CHECKMULTISIG));
    }

	// SYSCOIN check to see if this is a syscoin service transaction, if so get the scriptPubKey by extracting service specific script information
	CScript scriptPubKey;
	CScript scriptPubKeyOut;
	if (RemoveSyscoinScript(scriptPubKeyIn, scriptPubKeyOut))
		scriptPubKey = scriptPubKeyOut;
	else
		scriptPubKey = scriptPubKeyIn;
    vSolutionsRet.clear();

    // Shortcut for pay-to-script-hash, which are more constrained than the other types:
    // it is always OP_HASH160 20 [20 byte hash] OP_EQUAL
    if (scriptPubKey.IsPayToScriptHash())
    {
        typeRet = TX_SCRIPTHASH;
        std::vector<unsigned char> hashBytes(scriptPubKey.begin()+2, scriptPubKey.begin()+22);
        vSolutionsRet.push_back(hashBytes);
        return true;
    }

    // Provably prunable, data-carrying output
    //
    // So long as script passes the IsUnspendable() test and all but the first
    // byte passes the IsPushOnly() test we don't care what exactly is in the
    // script.
    if (scriptPubKey.size() >= 1 && scriptPubKey[0] == OP_RETURN && scriptPubKey.IsPushOnly(scriptPubKey.begin()+1)) {
        typeRet = TX_NULL_DATA;
        return true;
    }

    // Scan templates
    const CScript& script1 = scriptPubKey;
    BOOST_FOREACH(const PAIRTYPE(txnouttype, CScript)& tplate, mTemplates)
    {
        const CScript& script2 = tplate.second;
        vSolutionsRet.clear();

        opcodetype opcode1, opcode2;
        std::vector<unsigned char> vch1, vch2;

        // Compare
        CScript::const_iterator pc1 = script1.begin();
        CScript::const_iterator pc2 = script2.begin();
        while (true)
        {
            if (pc1 == script1.end() && pc2 == script2.end())
            {
                // Found a match
                typeRet = tplate.first;
                if (typeRet == TX_MULTISIG)
                {
                    // Additional checks for TX_MULTISIG:
                    unsigned char m = vSolutionsRet.front()[0];
                    unsigned char n = vSolutionsRet.back()[0];
                    if (m < 1 || n < 1 || m > n || vSolutionsRet.size()-2 != n)
                        return false;
                }
                return true;
            }
            if (!script1.GetOp(pc1, opcode1, vch1))
                break;
            if (!script2.GetOp(pc2, opcode2, vch2))
                break;

            // Template matching opcodes:
            if (opcode2 == OP_PUBKEYS)
            {
                while (vch1.size() >= 33 && vch1.size() <= 65)
                {
                    vSolutionsRet.push_back(vch1);
                    if (!script1.GetOp(pc1, opcode1, vch1))
                        break;
                }
                if (!script2.GetOp(pc2, opcode2, vch2))
                    break;
                // Normal situation is to fall through
                // to other if/else statements
            }

            if (opcode2 == OP_PUBKEY)
            {
                if (vch1.size() < 33 || vch1.size() > 65)
                    break;
                vSolutionsRet.push_back(vch1);
            }
            else if (opcode2 == OP_PUBKEYHASH)
            {
                if (vch1.size() != sizeof(uint160))
                    break;
                vSolutionsRet.push_back(vch1);
            }
            else if (opcode2 == OP_SMALLINTEGER)
            {   // Single-byte small integer pushed onto vSolutions
                if (opcode1 == OP_0 ||
                    (opcode1 >= OP_1 && opcode1 <= OP_16))
                {
                    char n = (char)CScript::DecodeOP_N(opcode1);
                    vSolutionsRet.push_back(valtype(1, n));
                }
                else
                    break;
            }
            else if (opcode1 != opcode2 || vch1 != vch2)
            {
                // Others must match exactly
                break;
            }
        }
    }

    vSolutionsRet.clear();
    typeRet = TX_NONSTANDARD;
    return false;
}
Esempio n. 12
0
///=====================================================
/// 
///=====================================================
inline bool Path::HasFinishedPath() const{
	return (m_path.empty() || (m_openList.empty() && !m_closedList.empty()));
}
Esempio n. 13
0
///update called every complete cycle of service loop
bool CMonitorService::update ()
{
	Server->update();

	uint	iclient;

	for (iclient=0; iclient<Clients.size(); ++iclient)
	{
		CMonitorClient	&client = *Clients[iclient];
		if (client.Authentificated)
		{
			client.update();
		}
	}
	
	// Sent bad login msg to clients at the right time
	NLMISC::TTime currentTime = NLMISC::CTime::getLocalTime();
	while (!BadLoginClients.empty() && BadLoginClients.begin()->first <= currentTime)
	{
		CMonitorClient *client = BadLoginClients.begin()->second;
		if (client != NULL)
		{
			CMessage msgout;
			msgout.setType("AUTHENT_INVALID");		
			Server->send(msgout, client->getSock());
			client->BadLogin = false; // allow to accept login again for that client			
		}
		BadLoginClients.erase(BadLoginClients.begin());
	}

/*
	if (!Clients.empty() && !Entites.empty())
	{
		// Update some primitive
		static uint primitiveToUpdate = 0;
		CConfigFile::CVar *var = ConfigFile.getVarPtr ("UpdatePerTick");
		uint count = 10;
		if (var && (var->Type == CConfigFile::CVar::T_INT))
			count = var->asInt();

		// Loop to the beginning
		if (primitiveToUpdate >= Entites.size())
			primitiveToUpdate = 0;

		// Resize the client array
		// For each client
		uint i;
		for (i=0; i<Clients.size(); i++)
		{
			nlassert (Clients[i]->Entites.size() <= Entites.size());
			Clients[i]->Entites.resize (Entites.size());
		}

		// For each primitive
		uint firstPrimitiveToUpdate = primitiveToUpdate;
		while (count)
		{
			// Present ?
			if (Entites[primitiveToUpdate].Flags & CEntityEntry::Present)
			{
				// One more
				count--;

				// Get the primitive position
				TDataSetRow	entityIndex = TDataSetRow::createFromRawIndex (primitiveToUpdate);
				CMirrorPropValueRO<TYPE_POSX> valueX( TheDataset, entityIndex, DSPropertyPOSX );
				CMirrorPropValueRO<TYPE_POSY> valueY( TheDataset, entityIndex, DSPropertyPOSY );
				CMonitorClient::CPosData posData;
				posData.X = (float)valueX / 1000.f;
				posData.Y = (float)valueY / 1000.f;

				// For each client
				for (i=0; i<Clients.size(); i++)
				{
					// The client
					CMonitorClient &client = *Clients[i];

					// Send position ?
					bool sendPos = false;

					// Clipped ?
					const NLMISC::CVector &topLeft = client.getTopLeft();
					const NLMISC::CVector &bottomRight = client.getBottomRight();
					if ((posData.X>=topLeft.x) && (posData.Y>=topLeft.y) && (posData.X<=bottomRight.x) && (posData.Y<=bottomRight.y))
					{
						// Inside
						if (client.Entites[primitiveToUpdate].Flags & CMonitorClient::CEntityEntry::Present)
						{
							// Send a POS message
							sendPos = true;
						}
						else
						{
							// Send a ADD and a POS message
							CMirrorPropValueRO<TYPE_NAME_STRING_ID> stringId( TheDataset, entityIndex, DSPropertyNAME_STRING_ID);
							CMonitorClient::CAddData addData;
							addData.Id = primitiveToUpdate;
							addData.StringId = stringId;
							addData.EntityId = TheDataset.getEntityId (entityIndex);
							client.Add.push_back (addData);

							sendPos = true;
						}
					}
					else
					{
						// Outside
						// Inside
						if (client.Entites[primitiveToUpdate].Flags & CMonitorClient::CEntityEntry::Present)
						{
							// Send a RMV message
							client.Rmv.push_back (primitiveToUpdate);
						}
					}

					// Send position ?
					if (sendPos)
					{
						CMirrorPropValueRO<TYPE_ORIENTATION> valueT( TheDataset, entityIndex, DSPropertyORIENTATION );
						posData.Id = primitiveToUpdate;
						posData.Tetha = valueT;
						client.Pos.push_back (posData);
					}
				}
			}
			else
			{
				// Not present
				for (i=0; i<Clients.size(); i++)
				{
					// The client
					if (Clients[i]->Entites[primitiveToUpdate].Flags & CMonitorClient::CEntityEntry::Present)
					{
						// One more
						count--;

						// Send a RMV message
						Clients[i]->Rmv.push_back (primitiveToUpdate);
					}
				}
			}

			// Next primitive
			primitiveToUpdate++;

			// Loop to the beginning
			if (primitiveToUpdate >= Entites.size())
				primitiveToUpdate = 0;

			// Return to the first ?
			if (firstPrimitiveToUpdate == primitiveToUpdate)
				break;
		}

		// For each client
		for (i=0; i<Clients.size(); i++)
			Clients[i].update ();
	}
*/
	return true;
}
Esempio n. 14
0
bool Polish::Write(const std::string& filename, const std::multimap<int, Airspace>& airspaces) {
	if (airspaces.empty()) {
		AirspaceConverter::LogMessage("Polish output: no airspace, nothing to write", false);
		return false;
	}

	// Check if has the right extension
	if (!boost::iequals(boost::filesystem::path(filename).extension().string(), ".mp")) {
		AirspaceConverter::LogMessage("ERROR: Expected MP extension but found: " + boost::filesystem::path(filename).extension().string(), true);
		return false;
	}

	if (file.is_open()) file.close();
	file.open(filename, std::ios::out | std::ios::trunc | std::ios::binary);
	if (!file.is_open() || file.bad()) {
		AirspaceConverter::LogMessage("ERROR: Unable to open output file: " + filename, true);
		return false;
	}
	AirspaceConverter::LogMessage("Writing output file: " + filename, false);

	WriteHeader(filename);

	// Go trough all airspaces
	for (const std::pair<const int,Airspace>& pair : airspaces)
	{
		// Get the airspace
		const Airspace& a = pair.second;

		// Just a couple if assertions
		assert(a.GetNumberOfPoints() > 3);
		assert(a.GetFirstPoint()==a.GetLastPoint());

		// Determine if it's a POLYGON or a POLYLINE
		if (a.GetType() == Airspace::PROHIBITED || a.GetType() == Airspace::CTR || a.GetType() == Airspace::DANGER) {
			file << "[POLYGON]\n"
				//<< "Type="<< types[a.GetType()] <<"\n"; //TODO...
				<< "Type=0x18" <<"\n";
		} else {
			file << "[POLYLINE]\n"
				<< "Type=0x07\n"; //TODO....
		}

		// Add the label
		file << "Label="<<MakeLabel(a)<<"\n";

		file << "Levels=3\n";

		// Insert all the points
		file << "Data0=";
		double lat,lon;
		for (unsigned int i=0; i<a.GetNumberOfPoints()-1; i++) {
			a.GetPointAt(i).GetLatLon(lat,lon);
			file << "(" << lat << "," << lon << "),";
		}
		a.GetLastPoint().GetLatLon(lat,lon);
		file << "(" << lat << "," << lon << ")\n";

		//file<< "EndLevel=4\n";

		// Close the element
		file << "[END]\n\n";
	}
	file.close();
	return true;
}
Esempio n. 15
0
/// visitGraph - Visit the functions in the specified graph, updating the
/// specified lattice values for all of their uses.
///
void StructureFieldVisitorBase::
visitGraph(DSGraph &DSG, std::multimap<DSNode*, LatticeValue*> &NodeLVs) {
  assert(!NodeLVs.empty() && "No lattice values to compute!");

  // To visit a graph, first step, we visit the instruction making up each
  // function in the graph, but ignore calls when processing them.  We handle
  // call nodes explicitly by looking at call nodes in the graph if needed.  We
  // handle instructions before calls to avoid interprocedural analysis if we
  // can drive lattice values to bottom early.
  //
  SFVInstVisitor IV(DSG, Callbacks, NodeLVs);

  for (DSGraph::retnodes_iterator FI = DSG.retnodes_begin(),
         E = DSG.retnodes_end(); FI != E; ++FI)
    for (Function::iterator BB = FI->first->begin(), E = FI->first->end();
         BB != E; ++BB)
      for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I)
        if (IV.visit(*I) && NodeLVs.empty())
          return;  // Nothing left to analyze.

  // Keep track of which actual direct callees are handled.
  std::set<Function*> CalleesHandled;

  // Once we have visited all of the instructions in the function bodies, if
  // there are lattice values that have not been driven to bottom, see if any of
  // the nodes involved are passed into function calls.  If so, we potentially
  // have to recursively traverse the call graph.
  for (DSGraph::fc_iterator CS = DSG.fc_begin(), E = DSG.fc_end();
       CS != E; ++CS) {
    // Figure out the mapping from a node in the caller (potentially several)
    // nodes in the callee.
    DSGraph::NodeMapTy CallNodeMap;

    Instruction *TheCall = CS->getCallSite().getInstruction();

    // If this is an indirect function call, assume nothing gets passed through
    // it. FIXME: THIS IS BROKEN!  Just get the ECG for the fn ptr if it's not
    // direct.
    if (CS->isIndirectCall())
      continue;

    // If this is an external function call, it cannot be involved with this
    // node, because otherwise the node would be marked incomplete!
    if (CS->getCalleeFunc()->isExternal())
      continue;

    // If we can handle this function call, remove it from the set of direct
    // calls found by the visitor.
    CalleesHandled.insert(CS->getCalleeFunc());

    std::vector<DSNodeHandle> Args;

    DSGraph *CG = &ECG.getDSGraph(*CS->getCalleeFunc());
    CG->getFunctionArgumentsForCall(CS->getCalleeFunc(), Args);

    if (!CS->getRetVal().isNull())
      DSGraph::computeNodeMapping(Args[0], CS->getRetVal(), CallNodeMap);
    for (unsigned i = 0, e = CS->getNumPtrArgs(); i != e; ++i) {
      if (i == Args.size()-1) break;
      DSGraph::computeNodeMapping(Args[i+1], CS->getPtrArg(i), CallNodeMap);
    }
    Args.clear();

    // The mapping we just computed maps from nodes in the callee to nodes in
    // the caller, so we can't query it efficiently.  Instead of going through
    // the trouble of inverting the map to do this (linear time with the size of
    // the mapping), we just do a linear search to see if any affected nodes are
    // passed into this call.
    bool CallCanModifyDataFlow = false;
    for (DSGraph::NodeMapTy::iterator MI = CallNodeMap.begin(),
           E = CallNodeMap.end(); MI != E; ++MI)
      if (NodeLVs.count(MI->second.getNode()))
        // Okay, the node is passed in, check to see if the call might do
        // something interesting to it (i.e. if analyzing the call can produce
        // anything other than "top").
        if ((CallCanModifyDataFlow = NodeCanPossiblyBeInteresting(MI->first,
                                                                  Callbacks)))
          break;

    // If this function call cannot impact the analysis (either because the
    // nodes we are tracking are not passed into the call, or the DSGraph for
    // the callee tells us that analysis of the callee can't provide interesting
    // information), ignore it.
    if (!CallCanModifyDataFlow)
      continue;

    // Okay, either compute analysis results for the callee function, or reuse
    // results previously computed.
    std::multimap<DSNode*, LatticeValue*> &CalleeFacts = getCalleeFacts(*CG);

    // Merge all of the facts for the callee into the facts for the caller.  If
    // this reduces anything in the caller to 'bottom', remove them.
    for (DSGraph::NodeMapTy::iterator MI = CallNodeMap.begin(),
           E = CallNodeMap.end(); MI != E; ++MI) {
      // If we have Lattice facts in the caller for this node in the callee,
      // merge any information from the callee into the caller.

      // If the node is not accessed in the callee at all, don't update.
      if (MI->first->getType() == Type::VoidTy)
        continue;

      // If there are no data-flow facts live in the caller for this node, don't
      // both processing it.
      std::multimap<DSNode*, LatticeValue*>::iterator NLVI =
        NodeLVs.find(MI->second.getNode());
      if (NLVI == NodeLVs.end()) continue;
          
          
      // Iterate over all of the lattice values that have corresponding fields
      // in the callee, merging in information as we go.  Be careful about the
      // fact that the callee may get passed the address of a substructure and
      // other funny games.
      //if (CalleeFacts.count(const_cast<DSNode*>(MI->first)) == 0) {

      DSNode *CalleeNode = const_cast<DSNode*>(MI->first);

      unsigned CalleeNodeOffset = MI->second.getOffset();
      while (NLVI->first == MI->second.getNode()) {
        // Figure out what offset in the callee this field would land.
        unsigned FieldOff = NLVI->second->getFieldOffset()+CalleeNodeOffset;

        // If the field is not within the callee node, ignore it.
        if (FieldOff >= CalleeNode->getSize()) {
          ++NLVI;
          continue;
        }

        // Okay, check to see if we have a lattice value for the field at offset
        // FieldOff in the callee node.
        const LatticeValue *CalleeLV = 0;

        std::multimap<DSNode*, LatticeValue*>::iterator CFI = 
          CalleeFacts.lower_bound(CalleeNode);
        for (; CFI != CalleeFacts.end() && CFI->first == CalleeNode; ++CFI)
          if (CFI->second->getFieldOffset() == FieldOff) {
            CalleeLV = CFI->second;   // Found it!
            break;
          }
        
        // If we don't, the lattice value hit bottom and we should remove the
        // lattice value in the caller.
        if (!CalleeLV) {
          delete NLVI->second;   // The lattice value hit bottom.
          NodeLVs.erase(NLVI++);
          continue;
        }

        // Finally, if we did find a corresponding entry, merge the information
        // into the caller's lattice value and keep going.
        if (NLVI->second->mergeInValue(CalleeLV)) {
          // Okay, merging these two caused the caller value to hit bottom.
          // Remove it.
          delete NLVI->second;   // The lattice value hit bottom.
          NodeLVs.erase(NLVI++);
        }

        ++NLVI;  // We successfully merged in some information!
      }

      // If we ran out of facts to prove, just exit.
      if (NodeLVs.empty()) return;
    }
  }

  // The local analysis pass inconveniently discards many local function calls
  // from the graph if they are to known functions.  Loop over direct function
  // calls not handled above and visit them as appropriate.
  while (!IV.DirectCallSites.empty()) {
    Instruction *Call = *IV.DirectCallSites.begin();
    IV.DirectCallSites.erase(IV.DirectCallSites.begin());

    // Is this one actually handled by DSA?
    if (CalleesHandled.count(cast<Function>(Call->getOperand(0))))
      continue;

    // Collect the pointers involved in this call.    
    std::vector<Value*> Pointers;
    if (isa<PointerType>(Call->getType()))
      Pointers.push_back(Call);
    for (unsigned i = 1, e = Call->getNumOperands(); i != e; ++i)
      if (isa<PointerType>(Call->getOperand(i)->getType()))
        Pointers.push_back(Call->getOperand(i));

    // If this is an intrinsic function call, figure out which one.
    unsigned IID = cast<Function>(Call->getOperand(0))->getIntrinsicID();

    for (unsigned i = 0, e = Pointers.size(); i != e; ++i) {
      // If any of our lattice values are passed into this call, which is
      // specially handled by the local analyzer, inform the lattice function.
      DSNode *N = DSG.getNodeForValue(Pointers[i]).getNode();
      for (std::multimap<DSNode*, LatticeValue*>::iterator LVI =
             NodeLVs.lower_bound(N); LVI != NodeLVs.end() && LVI->first == N;) {
        bool AtBottom = false;
        switch (IID) {
        default:
          AtBottom = LVI->second->visitRecognizedCall(*Call);
          break;
        case Intrinsic::memset:
          if (Callbacks & Visit::Stores)
            AtBottom = LVI->second->visitMemSet(*cast<CallInst>(Call));
          break;
        }

        if (AtBottom) {
          delete LVI->second;
          NodeLVs.erase(LVI++);
        } else {
          ++LVI;
        }
      }
    }
  }
}
Esempio n. 16
0
/// ProcessNodesReachableFromGlobals - If we inferred anything about nodes
/// reachable from globals, we have to make sure that we incorporate data for
/// all graphs that include those globals due to the nature of the globals
/// graph.
///
void StructureFieldVisitorBase::
ProcessNodesReachableFromGlobals(DSGraph &DSG,
                                 std::multimap<DSNode*,LatticeValue*> &NodeLVs){
  // Start by marking all nodes reachable from globals.
  DSScalarMap &SM = DSG.getScalarMap();
  if (SM.global_begin() == SM.global_end()) return;

  hash_set<const DSNode*> Reachable;
  for (DSScalarMap::global_iterator GI = SM.global_begin(),
         E = SM.global_end(); GI != E; ++GI)
    SM[*GI].getNode()->markReachableNodes(Reachable);
  if (Reachable.empty()) return;
  
  // If any of the nodes with dataflow facts are reachable from the globals
  // graph, we have to do the GG processing step.
  bool MustProcessThroughGlobalsGraph = false;
  for (std::multimap<DSNode*, LatticeValue*>::iterator I = NodeLVs.begin(),
         E = NodeLVs.end(); I != E; ++I)
    if (Reachable.count(I->first)) {
      MustProcessThroughGlobalsGraph = true;
      break;
    }
  
  if (!MustProcessThroughGlobalsGraph) return;
  Reachable.clear();

  // Compute the mapping from DSG to the globals graph.
  DSGraph::NodeMapTy DSGToGGMap;
  DSG.computeGToGGMapping(DSGToGGMap);

  // Most of the times when we find facts about things reachable from globals we
  // we are in the main graph.  This means that we have *all* of the globals
  // graph in this DSG.  To be efficient, we compute the minimum set of globals
  // that can reach any of the NodeLVs facts.
  //
  // I'm not aware of any wonderful way of computing the set of globals that
  // points to the set of nodes in NodeLVs that is not N^2 in either NodeLVs or
  // the number of globals, except to compute the inverse of DSG.  As such, we
  // compute the inverse graph of DSG, which basically has the edges going from
  // pointed to nodes to pointing nodes.  Because we only care about one
  // connectedness properties, we ignore field info.  In addition, we only
  // compute inverse of the portion of the graph reachable from the globals.
  std::set<std::pair<DSNode*,DSNode*> > InverseGraph;

  for (DSScalarMap::global_iterator GI = SM.global_begin(),
         E = SM.global_end(); GI != E; ++GI)
    ComputeInverseGraphFrom(SM[*GI].getNode(), InverseGraph);

  // Okay, now that we have our bastardized inverse graph, compute the set of
  // globals nodes reachable from our lattice nodes.
  for (std::multimap<DSNode*, LatticeValue*>::iterator I = NodeLVs.begin(),
         E = NodeLVs.end(); I != E; ++I)
    ComputeNodesReachableFrom(I->first, InverseGraph, Reachable);
 
  // Now that we know which nodes point to the data flow facts, figure out which
  // globals point to the data flow facts.
  std::set<GlobalValue*> Globals;
  for (hash_set<const DSNode*>::iterator I = Reachable.begin(),
         E = Reachable.end(); I != E; ++I)
    Globals.insert((*I)->globals_begin(), (*I)->globals_end());

  // Finally, loop over all of the DSGraphs for the program, computing
  // information for the graph if not done already, mapping the result into our
  // context.
  for (hash_map<const Function*, DSGraph*>::iterator GI = ECG.DSInfo.begin(),
         E = ECG.DSInfo.end(); GI != E; ++GI) {
    DSGraph &FG = *GI->second;
    // Graphs can contain multiple functions, only process the graph once.
    if (GI->first != FG.retnodes_begin()->first ||
        // Also, do not bother reprocessing DSG.
        &FG == &DSG)
      continue;

    bool GraphUsesGlobal = false;
    for (std::set<GlobalValue*>::iterator I = Globals.begin(),
           E = Globals.end(); I != E; ++I)
      if (FG.getScalarMap().count(*I)) {
        GraphUsesGlobal = true;
        break;
      }

    // If this graph does not contain the global at all, there is no reason to
    // even think about it.
    if (!GraphUsesGlobal) continue;

    // Otherwise, compute the full set of dataflow effects of the function.
    std::multimap<DSNode*, LatticeValue*> &FGF = getCalleeFacts(FG);
    //std::cerr << "Computed: " << FG.getFunctionNames() << "\n";

#if 0
    for (std::multimap<DSNode*, LatticeValue*>::iterator I = FGF.begin(),
           E = FGF.end(); I != E; ++I)
      I->second->dump();
#endif
    // Compute the mapping of nodes in the globals graph to the function's
    // graph.  Note that this function graph may not have nodes (or may have
    // fragments of full nodes) in the globals graph, and we don't want this to
    // pessimize the analysis.
    std::multimap<const DSNode*, std::pair<DSNode*,int> > GraphMap;
    DSGraph::NodeMapTy GraphToGGMap;
    FG.computeGToGGMapping(GraphToGGMap);

    // "Invert" the mapping.  We compute the mapping from the start of a global
    // graph node to a place in the graph's node.  Note that not all of the GG
    // node may be present in the graphs node, so there may be a negative offset
    // involved.
    while (!GraphToGGMap.empty()) {
      DSNode *GN = const_cast<DSNode*>(GraphToGGMap.begin()->first);
      DSNodeHandle &GGNH = GraphToGGMap.begin()->second;
      GraphMap.insert(std::make_pair(GGNH.getNode(),
                                     std::make_pair(GN, -GGNH.getOffset())));
      GraphToGGMap.erase(GraphToGGMap.begin());
    }

    // Loop over all of the dataflow facts that we have computed, mapping them
    // to the globals graph.
    for (std::multimap<DSNode*, LatticeValue*>::iterator I = NodeLVs.begin(),
           E = NodeLVs.end(); I != E; ) {
      bool FactHitBottom = false;

      //I->second->dump();

      assert(I->first->getParentGraph() == &DSG);
      assert(I->second->getNode()->getParentGraph() == &DSG);

      // Node is in the GG?
      DSGraph::NodeMapTy::iterator DSGToGGMapI = DSGToGGMap.find(I->first);
      if (DSGToGGMapI != DSGToGGMap.end()) {
        DSNodeHandle &GGNH = DSGToGGMapI->second;
        const DSNode *GGNode = GGNH.getNode();
        unsigned DSGToGGOffset = GGNH.getOffset();

        // See if there is a node in FG that corresponds to this one.  If not,
        // no information will be computed in this scope, as the memory is not
        // accessed.
        std::multimap<const DSNode*, std::pair<DSNode*,int> >::iterator GMI =
          GraphMap.find(GGNode);

        // LatticeValOffset - The offset from the start of the GG Node to the
        // start of the field we are interested in.
        unsigned LatticeValOffset = I->second->getFieldOffset()+DSGToGGOffset;

        // Loop over all of the nodes in FG that correspond to this single node
        // in the GG.
        for (; GMI != GraphMap.end() && GMI->first == GGNode; ++GMI) {
          // Compute the offset to the field in the user graph.
          unsigned FieldOffset = LatticeValOffset - GMI->second.second;

          // If the field is within the amount of memory accessed by this scope,
          // then there must be a corresponding lattice value.
          DSNode *FGNode = GMI->second.first;
          if (FieldOffset < FGNode->getSize()) {
            LatticeValue *CorrespondingLV = 0;

            std::multimap<DSNode*, LatticeValue*>::iterator FGFI =
              FGF.find(FGNode);
            for (; FGFI != FGF.end() && FGFI->first == FGNode; ++FGFI)
              if (FGFI->second->getFieldOffset() == FieldOffset) {
                CorrespondingLV = FGFI->second;
                break;
              }

            // Finally, if either there was no corresponding fact (because it
            // hit bottom in this scope), or if merging the two pieces of
            // information makes it hit bottom, remember this.
            if (CorrespondingLV == 0 ||
                I->second->mergeInValue(CorrespondingLV))
              FactHitBottom = true;
          }
        }
      }

      if (FactHitBottom) {
        delete I->second;
        NodeLVs.erase(I++);
        if (NodeLVs.empty()) return;
      } else {
        ++I;
      }
    }
  }
}
Esempio n. 17
0
bool Solver(const CScript& scriptPubKey, txnouttype& typeRet, std::vector<std::vector<unsigned char> >& vSolutionsRet)
{
    // Templates
    static std::multimap<txnouttype, CScript> mTemplates;
    if (mTemplates.empty())
    {
        // Standard tx, sender provides pubkey, receiver adds signature
        mTemplates.insert(std::make_pair(TX_PUBKEY, CScript() << OP_PUBKEY << OP_CHECKSIG));

        // Bitcoin address tx, sender provides hash of pubkey, receiver provides signature and pubkey
        mTemplates.insert(std::make_pair(TX_PUBKEYHASH, CScript() << OP_DUP << OP_HASH160 << OP_PUBKEYHASH << OP_EQUALVERIFY << OP_CHECKSIG));

        // Sender provides N pubkeys, receivers provides M signatures
        mTemplates.insert(std::make_pair(TX_MULTISIG, CScript() << OP_SMALLINTEGER << OP_PUBKEYS << OP_SMALLINTEGER << OP_CHECKMULTISIG));
    }

    vSolutionsRet.clear();

    // If we have a name script, strip the prefix
    const CNameScript nameOp(scriptPubKey);
    const CScript& script1 = nameOp.getAddress();

    // Shortcut for pay-to-script-hash, which are more constrained than the other types:
    // it is always OP_HASH160 20 [20 byte hash] OP_EQUAL
    if (script1.IsPayToScriptHash(false))
    {
        typeRet = TX_SCRIPTHASH;
        std::vector<unsigned char> hashBytes(script1.begin()+2, script1.begin()+22);
        vSolutionsRet.push_back(hashBytes);
        return true;
    }

    int witnessversion;
    std::vector<unsigned char> witnessprogram;
    if (scriptPubKey.IsWitnessProgram(witnessversion, witnessprogram)) {
        if (witnessversion == 0 && witnessprogram.size() == 20) {
            typeRet = TX_WITNESS_V0_KEYHASH;
            vSolutionsRet.push_back(witnessprogram);
            return true;
        }
        if (witnessversion == 0 && witnessprogram.size() == 32) {
            typeRet = TX_WITNESS_V0_SCRIPTHASH;
            vSolutionsRet.push_back(witnessprogram);
            return true;
        }
        if (witnessversion != 0) {
            typeRet = TX_WITNESS_UNKNOWN;
            vSolutionsRet.push_back(std::vector<unsigned char>{(unsigned char)witnessversion});
            vSolutionsRet.push_back(std::move(witnessprogram));
            return true;
        }
        return false;
    }

    // Provably prunable, data-carrying output
    //
    // So long as script passes the IsUnspendable() test and all but the first
    // byte passes the IsPushOnly() test we don't care what exactly is in the
    // script.
    if (scriptPubKey.size() >= 1 && scriptPubKey[0] == OP_RETURN && scriptPubKey.IsPushOnly(scriptPubKey.begin()+1)) {
        typeRet = TX_NULL_DATA;
        return true;
    }

    // Scan templates
    for (const std::pair<txnouttype, CScript>& tplate : mTemplates)
    {
        const CScript& script2 = tplate.second;
        vSolutionsRet.clear();

        opcodetype opcode1, opcode2;
        std::vector<unsigned char> vch1, vch2;

        // Compare
        CScript::const_iterator pc1 = script1.begin();
        CScript::const_iterator pc2 = script2.begin();
        while (true)
        {
            if (pc1 == script1.end() && pc2 == script2.end())
            {
                // Found a match
                typeRet = tplate.first;
                if (typeRet == TX_MULTISIG)
                {
                    // Additional checks for TX_MULTISIG:
                    unsigned char m = vSolutionsRet.front()[0];
                    unsigned char n = vSolutionsRet.back()[0];
                    if (m < 1 || n < 1 || m > n || vSolutionsRet.size()-2 != n)
                        return false;
                }
                return true;
            }
            if (!script1.GetOp(pc1, opcode1, vch1))
                break;
            if (!script2.GetOp(pc2, opcode2, vch2))
                break;

            // Template matching opcodes:
            if (opcode2 == OP_PUBKEYS)
            {
                while (vch1.size() >= 33 && vch1.size() <= 65)
                {
                    vSolutionsRet.push_back(vch1);
                    if (!script1.GetOp(pc1, opcode1, vch1))
                        break;
                }
                if (!script2.GetOp(pc2, opcode2, vch2))
                    break;
                // Normal situation is to fall through
                // to other if/else statements
            }

            if (opcode2 == OP_PUBKEY)
            {
                if (vch1.size() < 33 || vch1.size() > 65)
                    break;
                vSolutionsRet.push_back(vch1);
            }
            else if (opcode2 == OP_PUBKEYHASH)
            {
                if (vch1.size() != sizeof(uint160))
                    break;
                vSolutionsRet.push_back(vch1);
            }
            else if (opcode2 == OP_SMALLINTEGER)
            {   // Single-byte small integer pushed onto vSolutions
                if (opcode1 == OP_0 ||
                    (opcode1 >= OP_1 && opcode1 <= OP_16))
                {
                    char n = (char)CScript::DecodeOP_N(opcode1);
                    vSolutionsRet.push_back(valtype(1, n));
                }
                else
                    break;
            }
            else if (opcode1 != opcode2 || vch1 != vch2)
            {
                // Others must match exactly
                break;
            }
        }
    }

    vSolutionsRet.clear();
    typeRet = TX_NONSTANDARD;
    return false;
}
Esempio n. 18
0
File: main.cpp Progetto: CCJY/coliru
 bool empty() const { return m_functions.empty(); }