void initializeFilter(ParameterTypes... parameters) {
filter.reset(new FilterType(parameters...));
}
void ISNewText( const char *dev, const char *name, char *texts[], char *names[], int num)
{
scope->ISNewText(dev, name, texts, names, num);
}
void ISSnoopDevice (XMLEle *root)
{
scope->ISSnoopDevice(root);
}
bool IsRealTimeStream(void)
{
return !g_pvr_client->is_timeshifting();
}
void ISGetProperties(const char *dev)
{
scope->ISGetProperties(dev);
}
int GetChannelsAmount(void)
{
return g_pvr_client->get_channels_num();
}
void CloseLiveStream(void)
{
if (XBMC)
XBMC->Log(LOG_DEBUG, "CloseLiveStream");
g_pvr_client->destroy_session();
}
void VertexManager::DestroyDeviceObjects()
{
s_vertexBuffer.reset();
s_indexBuffer.reset();
}
explicit Sprite(const std::unique_ptr<Texture> &texture) :
Sprite(texture.get()) {
}
void Controller::sendRequests() {
// Connector::connect()
try {
connector_ptr_->connect(num_connect_attempts_);
} catch (PCPClient::connection_config_error& e) {
std::string err_msg { "failed to configure WebSocket: " };
throw controller_error { err_msg + e.what() };
} catch (PCPClient::connection_fatal_error& e) {
std::string err_msg { "failed to connect to " + BROKER_URL + " or "
+ FAILOVER_URL + " after "
+ std::to_string(num_connect_attempts_)
+ " attempts: " };
throw controller_error { err_msg + e.what() };
}
// Connector::isConnected()
if (connector_ptr_->isConnected()) {
std::cout << "Successfully connected\n";
} else {
// The connection has dropped; we can't send anything
throw controller_error { "connection dropped" };
}
// Send a valid request - a response is expected
leatherman::json_container::JsonContainer track {
"{\"artist\" : \"Captain Beefheart\"}" };
leatherman::json_container::JsonContainer valid_request {};
valid_request.set<leatherman::json_container::JsonContainer>("request", track);
valid_request.set<std::string>("details", "please send some good music");
std::vector<std::string> endpoints { "pcp://*/" + AGENT_CLIENT_TYPE };
try {
auto id = connector_ptr_->send(endpoints,
REQUEST_SCHEMA_NAME,
MSG_TIMEOUT_S,
valid_request);
std::cout << "Valid request message sent; message id: " << id << "\n";
} catch (PCPClient::connection_processing_error& e) {
std::string err_msg { "failed to send the request message: " };
throw controller_error { err_msg + e.what() };
}
// Send an invalid request - an error message should arrive
leatherman::json_container::JsonContainer bad_json {
"{\"genre\" : \"experimental rock\"}" };
leatherman::json_container::JsonContainer bad_request {};
bad_request.set<leatherman::json_container::JsonContainer>("request", bad_json);
bad_request.set<std::string>("details", "I'm not sure about this");
try {
auto id = connector_ptr_->send(endpoints,
REQUEST_SCHEMA_NAME,
MSG_TIMEOUT_S,
bad_request);
std::cout << "Bad request message sent; message id: " << id << "\n";
} catch (PCPClient::connection_processing_error& e) {
std::string err_msg { "failed to send the request message: " };
throw controller_error { err_msg + e.what() };
}
// Send an inventory request to the broker
leatherman::json_container::JsonContainer inventory_request {};
std::vector<std::string> query { "cth://*/" + AGENT_CLIENT_TYPE };
inventory_request.set<std::vector<std::string>>("query", query);
try {
// NB: use "cth:///server" with 3 '/' as the broker URI
auto id = connector_ptr_->send(std::vector<std::string> { "cth:///server" },
PCPClient::Protocol::INVENTORY_REQ_TYPE,
MSG_TIMEOUT_S,
inventory_request);
std::cout << "Inventory request message sent; message id: " << id << "\n";
} catch (PCPClient::connection_processing_error& e) {
std::string err_msg { "failed to send the inventory request message: " };
throw controller_error { err_msg + e.what() };
}
// Wait for the response and error messages
sleep(2);
}
namespace OGL
{
// This are the initially requested size for the buffers expressed in bytes
const u32 MAX_IBUFFER_SIZE = 2 * 1024 * 1024;
const u32 MAX_VBUFFER_SIZE = 32 * 1024 * 1024;
static std::unique_ptr<StreamBuffer> s_vertexBuffer;
static std::unique_ptr<StreamBuffer> s_indexBuffer;
static size_t s_baseVertex;
static size_t s_index_offset;
VertexManager::VertexManager() : m_cpu_v_buffer(MAX_VBUFFER_SIZE), m_cpu_i_buffer(MAX_IBUFFER_SIZE)
{
CreateDeviceObjects();
}
VertexManager::~VertexManager()
{
DestroyDeviceObjects();
}
void VertexManager::CreateDeviceObjects()
{
s_vertexBuffer = StreamBuffer::Create(GL_ARRAY_BUFFER, MAX_VBUFFER_SIZE);
m_vertex_buffers = s_vertexBuffer->m_buffer;
s_indexBuffer = StreamBuffer::Create(GL_ELEMENT_ARRAY_BUFFER, MAX_IBUFFER_SIZE);
m_index_buffers = s_indexBuffer->m_buffer;
m_last_vao = 0;
}
void VertexManager::DestroyDeviceObjects()
{
s_vertexBuffer.reset();
s_indexBuffer.reset();
}
void VertexManager::PrepareDrawBuffers(u32 stride)
{
u32 vertex_data_size = IndexGenerator::GetNumVerts() * stride;
u32 index_data_size = IndexGenerator::GetIndexLen() * sizeof(u16);
s_vertexBuffer->Unmap(vertex_data_size);
s_indexBuffer->Unmap(index_data_size);
ADDSTAT(stats.thisFrame.bytesVertexStreamed, vertex_data_size);
ADDSTAT(stats.thisFrame.bytesIndexStreamed, index_data_size);
}
void VertexManager::ResetBuffer(u32 stride)
{
if (m_cull_all)
{
// This buffer isn't getting sent to the GPU. Just allocate it on the cpu.
m_cur_buffer_pointer = m_base_buffer_pointer = m_cpu_v_buffer.data();
m_end_buffer_pointer = m_base_buffer_pointer + m_cpu_v_buffer.size();
IndexGenerator::Start((u16*)m_cpu_i_buffer.data());
}
else
{
auto buffer = s_vertexBuffer->Map(MAXVBUFFERSIZE, stride);
m_cur_buffer_pointer = m_base_buffer_pointer = buffer.first;
m_end_buffer_pointer = buffer.first + MAXVBUFFERSIZE;
s_baseVertex = buffer.second / stride;
buffer = s_indexBuffer->Map(MAXIBUFFERSIZE * sizeof(u16));
IndexGenerator::Start((u16*)buffer.first);
s_index_offset = buffer.second;
}
}
void VertexManager::Draw(u32 stride)
{
u32 index_size = IndexGenerator::GetIndexLen();
u32 max_index = IndexGenerator::GetNumVerts();
GLenum primitive_mode = 0;
switch (m_current_primitive_type)
{
case PRIMITIVE_POINTS:
primitive_mode = GL_POINTS;
glDisable(GL_CULL_FACE);
break;
case PRIMITIVE_LINES:
primitive_mode = GL_LINES;
glDisable(GL_CULL_FACE);
break;
case PRIMITIVE_TRIANGLES:
primitive_mode =
g_ActiveConfig.backend_info.bSupportsPrimitiveRestart ? GL_TRIANGLE_STRIP : GL_TRIANGLES;
break;
}
if (g_ogl_config.bSupportsGLBaseVertex)
{
glDrawRangeElementsBaseVertex(primitive_mode, 0, max_index, index_size, GL_UNSIGNED_SHORT,
(u8*)nullptr + s_index_offset, (GLint)s_baseVertex);
}
else
{
glDrawRangeElements(primitive_mode, 0, max_index, index_size, GL_UNSIGNED_SHORT,
(u8*)nullptr + s_index_offset);
}
INCSTAT(stats.thisFrame.numDrawCalls);
if (m_current_primitive_type != PRIMITIVE_TRIANGLES)
static_cast<Renderer*>(g_renderer.get())->SetGenerationMode();
}
void VertexManager::vFlush(bool useDstAlpha)
{
GLVertexFormat* nativeVertexFmt = (GLVertexFormat*)VertexLoaderManager::GetCurrentVertexFormat();
u32 stride = nativeVertexFmt->GetVertexStride();
if (m_last_vao != nativeVertexFmt->VAO)
{
glBindVertexArray(nativeVertexFmt->VAO);
m_last_vao = nativeVertexFmt->VAO;
}
PrepareDrawBuffers(stride);
// Makes sure we can actually do Dual source blending
bool dualSourcePossible = g_ActiveConfig.backend_info.bSupportsDualSourceBlend;
// If host supports GL_ARB_blend_func_extended, we can do dst alpha in
// the same pass as regular rendering.
if (useDstAlpha && dualSourcePossible)
{
ProgramShaderCache::SetShader(DSTALPHA_DUAL_SOURCE_BLEND, m_current_primitive_type);
}
else
{
ProgramShaderCache::SetShader(DSTALPHA_NONE, m_current_primitive_type);
}
// upload global constants
ProgramShaderCache::UploadConstants();
// setup the pointers
nativeVertexFmt->SetupVertexPointers();
Draw(stride);
// run through vertex groups again to set alpha
if (useDstAlpha && !dualSourcePossible)
{
ProgramShaderCache::SetShader(DSTALPHA_ALPHA_PASS, m_current_primitive_type);
// only update alpha
glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_TRUE);
glDisable(GL_BLEND);
Draw(stride);
// restore color mask
g_renderer->SetColorMask();
if (bpmem.blendmode.blendenable || bpmem.blendmode.subtract)
glEnable(GL_BLEND);
}
#if defined(_DEBUG) || defined(DEBUGFAST)
if (g_ActiveConfig.iLog & CONF_SAVESHADERS)
{
// save the shaders
ProgramShaderCache::PCacheEntry prog = ProgramShaderCache::GetShaderProgram();
std::string filename = StringFromFormat(
"%sps%.3d.txt", File::GetUserPath(D_DUMPFRAMES_IDX).c_str(), g_ActiveConfig.iSaveTargetId);
std::ofstream fps;
OpenFStream(fps, filename, std::ios_base::out);
fps << prog.shader.strpprog;
filename = StringFromFormat("%svs%.3d.txt", File::GetUserPath(D_DUMPFRAMES_IDX).c_str(),
g_ActiveConfig.iSaveTargetId);
std::ofstream fvs;
OpenFStream(fvs, filename, std::ios_base::out);
fvs << prog.shader.strvprog;
}
if (g_ActiveConfig.iLog & CONF_SAVETARGETS)
{
std::string filename =
StringFromFormat("%starg%.3d.png", File::GetUserPath(D_DUMPFRAMES_IDX).c_str(),
g_ActiveConfig.iSaveTargetId);
TargetRectangle tr;
tr.left = 0;
tr.right = Renderer::GetTargetWidth();
tr.top = 0;
tr.bottom = Renderer::GetTargetHeight();
g_renderer->SaveScreenshot(filename, tr);
}
#endif
g_Config.iSaveTargetId++;
ClearEFBCache();
}
} // namespace
ssize_t UdpTransport::SendSinglePacketHelper(
Header* header, const uint8_t* tx_data, size_t tx_length, uint8_t* rx_data,
size_t rx_length, const int attempts, std::string* error) {
ssize_t total_data_bytes = 0;
error->clear();
int attempts_left = attempts;
while (attempts_left > 0) {
if (!socket_->Send({{header->bytes(), kHeaderSize}, {tx_data, tx_length}})) {
*error = Socket::GetErrorMessage();
return -1;
}
// Keep receiving until we get a matching response or we timeout.
ssize_t bytes = 0;
do {
bytes = socket_->Receive(rx_packet_.data(), rx_packet_.size(), kResponseTimeoutMs);
if (bytes == -1) {
if (socket_->ReceiveTimedOut()) {
break;
}
*error = Socket::GetErrorMessage();
return -1;
} else if (bytes < static_cast<ssize_t>(kHeaderSize)) {
*error = "protocol error: incomplete header";
return -1;
}
} while (!header->Matches(rx_packet_.data()));
if (socket_->ReceiveTimedOut()) {
--attempts_left;
continue;
}
++sequence_;
// Save to |error| or |rx_data| as appropriate.
if (rx_packet_[kIndexId] == kIdError) {
error->append(rx_packet_.data() + kHeaderSize, rx_packet_.data() + bytes);
} else {
total_data_bytes += bytes - kHeaderSize;
size_t rx_data_bytes = std::min<size_t>(bytes - kHeaderSize, rx_length);
if (rx_data_bytes > 0) {
memcpy(rx_data, rx_packet_.data() + kHeaderSize, rx_data_bytes);
rx_data += rx_data_bytes;
rx_length -= rx_data_bytes;
}
}
// If the response has a continuation flag we need to prompt for more data by sending
// an empty packet.
if (rx_packet_[kIndexFlags] & kFlagContinuation) {
// We got a valid response so reset our attempt counter.
attempts_left = attempts;
header->Set(rx_packet_[kIndexId], sequence_, kFlagNone);
tx_data = nullptr;
tx_length = 0;
continue;
}
break;
}
if (attempts_left <= 0) {
*error = "no response from target";
return -1;
}
if (rx_packet_[kIndexId] == kIdError) {
*error = "target reported error: " + *error;
return -1;
}
return total_data_bytes;
}
std::unique_ptr<T> downcast_unique(std::unique_ptr<U> p)
{
return std::unique_ptr<T>(dynamic_cast<T*>(p.release()));
}
DestinationImageType transformImage() override {
return filter->apply(*this->sourceImage);
}
static void UpdatePadCallback(u64 userdata, int cycles_late) {
SharedMem* mem = reinterpret_cast<SharedMem*>(shared_mem->GetPointer());
if (is_device_reload_pending.exchange(false))
LoadInputDevices();
PadState state;
using namespace Settings::NativeButton;
state.a.Assign(buttons[A - BUTTON_HID_BEGIN]->GetStatus());
state.b.Assign(buttons[B - BUTTON_HID_BEGIN]->GetStatus());
state.x.Assign(buttons[X - BUTTON_HID_BEGIN]->GetStatus());
state.y.Assign(buttons[Y - BUTTON_HID_BEGIN]->GetStatus());
state.right.Assign(buttons[Right - BUTTON_HID_BEGIN]->GetStatus());
state.left.Assign(buttons[Left - BUTTON_HID_BEGIN]->GetStatus());
state.up.Assign(buttons[Up - BUTTON_HID_BEGIN]->GetStatus());
state.down.Assign(buttons[Down - BUTTON_HID_BEGIN]->GetStatus());
state.l.Assign(buttons[L - BUTTON_HID_BEGIN]->GetStatus());
state.r.Assign(buttons[R - BUTTON_HID_BEGIN]->GetStatus());
state.start.Assign(buttons[Start - BUTTON_HID_BEGIN]->GetStatus());
state.select.Assign(buttons[Select - BUTTON_HID_BEGIN]->GetStatus());
// Get current circle pad position and update circle pad direction
float circle_pad_x_f, circle_pad_y_f;
std::tie(circle_pad_x_f, circle_pad_y_f) = circle_pad->GetStatus();
constexpr int MAX_CIRCLEPAD_POS = 0x9C; // Max value for a circle pad position
s16 circle_pad_x = static_cast<s16>(circle_pad_x_f * MAX_CIRCLEPAD_POS);
s16 circle_pad_y = static_cast<s16>(circle_pad_y_f * MAX_CIRCLEPAD_POS);
const DirectionState direction = GetStickDirectionState(circle_pad_x, circle_pad_y);
state.circle_up.Assign(direction.up);
state.circle_down.Assign(direction.down);
state.circle_left.Assign(direction.left);
state.circle_right.Assign(direction.right);
mem->pad.current_state.hex = state.hex;
mem->pad.index = next_pad_index;
next_pad_index = (next_pad_index + 1) % mem->pad.entries.size();
// Get the previous Pad state
u32 last_entry_index = (mem->pad.index - 1) % mem->pad.entries.size();
PadState old_state = mem->pad.entries[last_entry_index].current_state;
// Compute bitmask with 1s for bits different from the old state
PadState changed = {{(state.hex ^ old_state.hex)}};
// Get the current Pad entry
PadDataEntry& pad_entry = mem->pad.entries[mem->pad.index];
// Update entry properties
pad_entry.current_state.hex = state.hex;
pad_entry.delta_additions.hex = changed.hex & state.hex;
pad_entry.delta_removals.hex = changed.hex & old_state.hex;
pad_entry.circle_pad_x = circle_pad_x;
pad_entry.circle_pad_y = circle_pad_y;
// If we just updated index 0, provide a new timestamp
if (mem->pad.index == 0) {
mem->pad.index_reset_ticks_previous = mem->pad.index_reset_ticks;
mem->pad.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
mem->touch.index = next_touch_index;
next_touch_index = (next_touch_index + 1) % mem->touch.entries.size();
// Get the current touch entry
TouchDataEntry& touch_entry = mem->touch.entries[mem->touch.index];
bool pressed = false;
float x, y;
std::tie(x, y, pressed) = touch_device->GetStatus();
touch_entry.x = static_cast<u16>(x * Core::kScreenBottomWidth);
touch_entry.y = static_cast<u16>(y * Core::kScreenBottomHeight);
touch_entry.valid.Assign(pressed ? 1 : 0);
// TODO(bunnei): We're not doing anything with offset 0xA8 + 0x18 of HID SharedMemory, which
// supposedly is "Touch-screen entry, which contains the raw coordinate data prior to being
// converted to pixel coordinates." (http://3dbrew.org/wiki/HID_Shared_Memory#Offset_0xA8).
// If we just updated index 0, provide a new timestamp
if (mem->touch.index == 0) {
mem->touch.index_reset_ticks_previous = mem->touch.index_reset_ticks;
mem->touch.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
// Signal both handles when there's an update to Pad or touch
event_pad_or_touch_1->Signal();
event_pad_or_touch_2->Signal();
// Reschedule recurrent event
CoreTiming::ScheduleEvent(pad_update_ticks - cycles_late, pad_update_event);
}
explicit Sprite(const std::unique_ptr<Texture> &texture, int32_t texX, int32_t texY, int32_t width,
int32_t height) :
Sprite(texture.get(), texX, texY, width, height) {
}
namespace HID {
// Handle to shared memory region designated to HID_User service
static Kernel::SharedPtr<Kernel::SharedMemory> shared_mem;
// Event handles
static Kernel::SharedPtr<Kernel::Event> event_pad_or_touch_1;
static Kernel::SharedPtr<Kernel::Event> event_pad_or_touch_2;
static Kernel::SharedPtr<Kernel::Event> event_accelerometer;
static Kernel::SharedPtr<Kernel::Event> event_gyroscope;
static Kernel::SharedPtr<Kernel::Event> event_debug_pad;
static u32 next_pad_index;
static u32 next_touch_index;
static u32 next_accelerometer_index;
static u32 next_gyroscope_index;
static int enable_accelerometer_count; // positive means enabled
static int enable_gyroscope_count; // positive means enabled
static int pad_update_event;
static int accelerometer_update_event;
static int gyroscope_update_event;
// Updating period for each HID device. These empirical values are measured from a 11.2 3DS.
constexpr u64 pad_update_ticks = BASE_CLOCK_RATE_ARM11 / 234;
constexpr u64 accelerometer_update_ticks = BASE_CLOCK_RATE_ARM11 / 104;
constexpr u64 gyroscope_update_ticks = BASE_CLOCK_RATE_ARM11 / 101;
constexpr float accelerometer_coef = 512.0f; // measured from hw test result
constexpr float gyroscope_coef = 14.375f; // got from hwtest GetGyroscopeLowRawToDpsCoefficient call
static std::atomic<bool> is_device_reload_pending;
static std::array<std::unique_ptr<Input::ButtonDevice>, Settings::NativeButton::NUM_BUTTONS_HID>
buttons;
static std::unique_ptr<Input::AnalogDevice> circle_pad;
static std::unique_ptr<Input::MotionDevice> motion_device;
static std::unique_ptr<Input::TouchDevice> touch_device;
DirectionState GetStickDirectionState(s16 circle_pad_x, s16 circle_pad_y) {
// 30 degree and 60 degree are angular thresholds for directions
constexpr float TAN30 = 0.577350269f;
constexpr float TAN60 = 1 / TAN30;
// a circle pad radius greater than 40 will trigger circle pad direction
constexpr int CIRCLE_PAD_THRESHOLD_SQUARE = 40 * 40;
DirectionState state{false, false, false, false};
if (circle_pad_x * circle_pad_x + circle_pad_y * circle_pad_y > CIRCLE_PAD_THRESHOLD_SQUARE) {
float t = std::abs(static_cast<float>(circle_pad_y) / circle_pad_x);
if (circle_pad_x != 0 && t < TAN60) {
if (circle_pad_x > 0)
state.right = true;
else
state.left = true;
}
if (circle_pad_x == 0 || t > TAN30) {
if (circle_pad_y > 0)
state.up = true;
else
state.down = true;
}
}
return state;
}
static void LoadInputDevices() {
std::transform(Settings::values.buttons.begin() + Settings::NativeButton::BUTTON_HID_BEGIN,
Settings::values.buttons.begin() + Settings::NativeButton::BUTTON_HID_END,
buttons.begin(), Input::CreateDevice<Input::ButtonDevice>);
circle_pad = Input::CreateDevice<Input::AnalogDevice>(
Settings::values.analogs[Settings::NativeAnalog::CirclePad]);
motion_device = Input::CreateDevice<Input::MotionDevice>(Settings::values.motion_device);
touch_device = Input::CreateDevice<Input::TouchDevice>(Settings::values.touch_device);
}
static void UnloadInputDevices() {
for (auto& button : buttons) {
button.reset();
}
circle_pad.reset();
motion_device.reset();
touch_device.reset();
}
static void UpdatePadCallback(u64 userdata, int cycles_late) {
SharedMem* mem = reinterpret_cast<SharedMem*>(shared_mem->GetPointer());
if (is_device_reload_pending.exchange(false))
LoadInputDevices();
PadState state;
using namespace Settings::NativeButton;
state.a.Assign(buttons[A - BUTTON_HID_BEGIN]->GetStatus());
state.b.Assign(buttons[B - BUTTON_HID_BEGIN]->GetStatus());
state.x.Assign(buttons[X - BUTTON_HID_BEGIN]->GetStatus());
state.y.Assign(buttons[Y - BUTTON_HID_BEGIN]->GetStatus());
state.right.Assign(buttons[Right - BUTTON_HID_BEGIN]->GetStatus());
state.left.Assign(buttons[Left - BUTTON_HID_BEGIN]->GetStatus());
state.up.Assign(buttons[Up - BUTTON_HID_BEGIN]->GetStatus());
state.down.Assign(buttons[Down - BUTTON_HID_BEGIN]->GetStatus());
state.l.Assign(buttons[L - BUTTON_HID_BEGIN]->GetStatus());
state.r.Assign(buttons[R - BUTTON_HID_BEGIN]->GetStatus());
state.start.Assign(buttons[Start - BUTTON_HID_BEGIN]->GetStatus());
state.select.Assign(buttons[Select - BUTTON_HID_BEGIN]->GetStatus());
// Get current circle pad position and update circle pad direction
float circle_pad_x_f, circle_pad_y_f;
std::tie(circle_pad_x_f, circle_pad_y_f) = circle_pad->GetStatus();
constexpr int MAX_CIRCLEPAD_POS = 0x9C; // Max value for a circle pad position
s16 circle_pad_x = static_cast<s16>(circle_pad_x_f * MAX_CIRCLEPAD_POS);
s16 circle_pad_y = static_cast<s16>(circle_pad_y_f * MAX_CIRCLEPAD_POS);
const DirectionState direction = GetStickDirectionState(circle_pad_x, circle_pad_y);
state.circle_up.Assign(direction.up);
state.circle_down.Assign(direction.down);
state.circle_left.Assign(direction.left);
state.circle_right.Assign(direction.right);
mem->pad.current_state.hex = state.hex;
mem->pad.index = next_pad_index;
next_pad_index = (next_pad_index + 1) % mem->pad.entries.size();
// Get the previous Pad state
u32 last_entry_index = (mem->pad.index - 1) % mem->pad.entries.size();
PadState old_state = mem->pad.entries[last_entry_index].current_state;
// Compute bitmask with 1s for bits different from the old state
PadState changed = {{(state.hex ^ old_state.hex)}};
// Get the current Pad entry
PadDataEntry& pad_entry = mem->pad.entries[mem->pad.index];
// Update entry properties
pad_entry.current_state.hex = state.hex;
pad_entry.delta_additions.hex = changed.hex & state.hex;
pad_entry.delta_removals.hex = changed.hex & old_state.hex;
pad_entry.circle_pad_x = circle_pad_x;
pad_entry.circle_pad_y = circle_pad_y;
// If we just updated index 0, provide a new timestamp
if (mem->pad.index == 0) {
mem->pad.index_reset_ticks_previous = mem->pad.index_reset_ticks;
mem->pad.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
mem->touch.index = next_touch_index;
next_touch_index = (next_touch_index + 1) % mem->touch.entries.size();
// Get the current touch entry
TouchDataEntry& touch_entry = mem->touch.entries[mem->touch.index];
bool pressed = false;
float x, y;
std::tie(x, y, pressed) = touch_device->GetStatus();
touch_entry.x = static_cast<u16>(x * Core::kScreenBottomWidth);
touch_entry.y = static_cast<u16>(y * Core::kScreenBottomHeight);
touch_entry.valid.Assign(pressed ? 1 : 0);
// TODO(bunnei): We're not doing anything with offset 0xA8 + 0x18 of HID SharedMemory, which
// supposedly is "Touch-screen entry, which contains the raw coordinate data prior to being
// converted to pixel coordinates." (http://3dbrew.org/wiki/HID_Shared_Memory#Offset_0xA8).
// If we just updated index 0, provide a new timestamp
if (mem->touch.index == 0) {
mem->touch.index_reset_ticks_previous = mem->touch.index_reset_ticks;
mem->touch.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
// Signal both handles when there's an update to Pad or touch
event_pad_or_touch_1->Signal();
event_pad_or_touch_2->Signal();
// Reschedule recurrent event
CoreTiming::ScheduleEvent(pad_update_ticks - cycles_late, pad_update_event);
}
static void UpdateAccelerometerCallback(u64 userdata, int cycles_late) {
SharedMem* mem = reinterpret_cast<SharedMem*>(shared_mem->GetPointer());
mem->accelerometer.index = next_accelerometer_index;
next_accelerometer_index = (next_accelerometer_index + 1) % mem->accelerometer.entries.size();
Math::Vec3<float> accel;
std::tie(accel, std::ignore) = motion_device->GetStatus();
accel *= accelerometer_coef;
// TODO(wwylele): do a time stretch like the one in UpdateGyroscopeCallback
// The time stretch formula should be like
// stretched_vector = (raw_vector - gravity) * stretch_ratio + gravity
AccelerometerDataEntry& accelerometer_entry =
mem->accelerometer.entries[mem->accelerometer.index];
accelerometer_entry.x = static_cast<s16>(accel.x);
accelerometer_entry.y = static_cast<s16>(accel.y);
accelerometer_entry.z = static_cast<s16>(accel.z);
// Make up "raw" entry
// TODO(wwylele):
// From hardware testing, the raw_entry values are approximately, but not exactly, as twice as
// corresponding entries (or with a minus sign). It may caused by system calibration to the
// accelerometer. Figure out how it works, or, if no game reads raw_entry, the following three
// lines can be removed and leave raw_entry unimplemented.
mem->accelerometer.raw_entry.x = -2 * accelerometer_entry.x;
mem->accelerometer.raw_entry.z = 2 * accelerometer_entry.y;
mem->accelerometer.raw_entry.y = -2 * accelerometer_entry.z;
// If we just updated index 0, provide a new timestamp
if (mem->accelerometer.index == 0) {
mem->accelerometer.index_reset_ticks_previous = mem->accelerometer.index_reset_ticks;
mem->accelerometer.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
event_accelerometer->Signal();
// Reschedule recurrent event
CoreTiming::ScheduleEvent(accelerometer_update_ticks - cycles_late, accelerometer_update_event);
}
static void UpdateGyroscopeCallback(u64 userdata, int cycles_late) {
SharedMem* mem = reinterpret_cast<SharedMem*>(shared_mem->GetPointer());
mem->gyroscope.index = next_gyroscope_index;
next_gyroscope_index = (next_gyroscope_index + 1) % mem->gyroscope.entries.size();
GyroscopeDataEntry& gyroscope_entry = mem->gyroscope.entries[mem->gyroscope.index];
Math::Vec3<float> gyro;
std::tie(std::ignore, gyro) = motion_device->GetStatus();
double stretch = Core::System::GetInstance().perf_stats.GetLastFrameTimeScale();
gyro *= gyroscope_coef * static_cast<float>(stretch);
gyroscope_entry.x = static_cast<s16>(gyro.x);
gyroscope_entry.y = static_cast<s16>(gyro.y);
gyroscope_entry.z = static_cast<s16>(gyro.z);
// Make up "raw" entry
mem->gyroscope.raw_entry.x = gyroscope_entry.x;
mem->gyroscope.raw_entry.z = -gyroscope_entry.y;
mem->gyroscope.raw_entry.y = gyroscope_entry.z;
// If we just updated index 0, provide a new timestamp
if (mem->gyroscope.index == 0) {
mem->gyroscope.index_reset_ticks_previous = mem->gyroscope.index_reset_ticks;
mem->gyroscope.index_reset_ticks = (s64)CoreTiming::GetTicks();
}
event_gyroscope->Signal();
// Reschedule recurrent event
CoreTiming::ScheduleEvent(gyroscope_update_ticks - cycles_late, gyroscope_update_event);
}
void GetIPCHandles(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
cmd_buff[1] = 0; // No error
cmd_buff[2] = 0x14000000; // IPC Command Structure translate-header
// TODO(yuriks): Return error from SendSyncRequest is this fails (part of IPC marshalling)
cmd_buff[3] = Kernel::g_handle_table.Create(Service::HID::shared_mem).Unwrap();
cmd_buff[4] = Kernel::g_handle_table.Create(Service::HID::event_pad_or_touch_1).Unwrap();
cmd_buff[5] = Kernel::g_handle_table.Create(Service::HID::event_pad_or_touch_2).Unwrap();
cmd_buff[6] = Kernel::g_handle_table.Create(Service::HID::event_accelerometer).Unwrap();
cmd_buff[7] = Kernel::g_handle_table.Create(Service::HID::event_gyroscope).Unwrap();
cmd_buff[8] = Kernel::g_handle_table.Create(Service::HID::event_debug_pad).Unwrap();
}
void EnableAccelerometer(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
++enable_accelerometer_count;
// Schedules the accelerometer update event if the accelerometer was just enabled
if (enable_accelerometer_count == 1) {
CoreTiming::ScheduleEvent(accelerometer_update_ticks, accelerometer_update_event);
}
cmd_buff[1] = RESULT_SUCCESS.raw;
LOG_DEBUG(Service_HID, "called");
}
void DisableAccelerometer(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
--enable_accelerometer_count;
// Unschedules the accelerometer update event if the accelerometer was just disabled
if (enable_accelerometer_count == 0) {
CoreTiming::UnscheduleEvent(accelerometer_update_event, 0);
}
cmd_buff[1] = RESULT_SUCCESS.raw;
LOG_DEBUG(Service_HID, "called");
}
void EnableGyroscopeLow(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
++enable_gyroscope_count;
// Schedules the gyroscope update event if the gyroscope was just enabled
if (enable_gyroscope_count == 1) {
CoreTiming::ScheduleEvent(gyroscope_update_ticks, gyroscope_update_event);
}
cmd_buff[1] = RESULT_SUCCESS.raw;
LOG_DEBUG(Service_HID, "called");
}
void DisableGyroscopeLow(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
--enable_gyroscope_count;
// Unschedules the gyroscope update event if the gyroscope was just disabled
if (enable_gyroscope_count == 0) {
CoreTiming::UnscheduleEvent(gyroscope_update_event, 0);
}
cmd_buff[1] = RESULT_SUCCESS.raw;
LOG_DEBUG(Service_HID, "called");
}
void GetGyroscopeLowRawToDpsCoefficient(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
cmd_buff[1] = RESULT_SUCCESS.raw;
f32 coef = gyroscope_coef;
memcpy(&cmd_buff[2], &coef, 4);
}
void GetGyroscopeLowCalibrateParam(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
cmd_buff[1] = RESULT_SUCCESS.raw;
const s16 param_unit = 6700; // an approximate value taken from hw
GyroscopeCalibrateParam param = {
{0, param_unit, -param_unit}, {0, param_unit, -param_unit}, {0, param_unit, -param_unit},
};
memcpy(&cmd_buff[2], ¶m, sizeof(param));
LOG_WARNING(Service_HID, "(STUBBED) called");
}
void GetSoundVolume(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
const u8 volume = 0x3F; // TODO(purpasmart): Find out if this is the max value for the volume
cmd_buff[1] = RESULT_SUCCESS.raw;
cmd_buff[2] = volume;
LOG_WARNING(Service_HID, "(STUBBED) called");
}
void Init() {
using namespace Kernel;
AddService(new HID_U_Interface);
AddService(new HID_SPVR_Interface);
is_device_reload_pending.store(true);
using Kernel::MemoryPermission;
shared_mem =
SharedMemory::Create(nullptr, 0x1000, MemoryPermission::ReadWrite, MemoryPermission::Read,
0, Kernel::MemoryRegion::BASE, "HID:SharedMemory");
next_pad_index = 0;
next_touch_index = 0;
next_accelerometer_index = 0;
next_gyroscope_index = 0;
enable_accelerometer_count = 0;
enable_gyroscope_count = 0;
// Create event handles
event_pad_or_touch_1 = Event::Create(ResetType::OneShot, "HID:EventPadOrTouch1");
event_pad_or_touch_2 = Event::Create(ResetType::OneShot, "HID:EventPadOrTouch2");
event_accelerometer = Event::Create(ResetType::OneShot, "HID:EventAccelerometer");
event_gyroscope = Event::Create(ResetType::OneShot, "HID:EventGyroscope");
event_debug_pad = Event::Create(ResetType::OneShot, "HID:EventDebugPad");
// Register update callbacks
pad_update_event = CoreTiming::RegisterEvent("HID::UpdatePadCallback", UpdatePadCallback);
accelerometer_update_event =
CoreTiming::RegisterEvent("HID::UpdateAccelerometerCallback", UpdateAccelerometerCallback);
gyroscope_update_event =
CoreTiming::RegisterEvent("HID::UpdateGyroscopeCallback", UpdateGyroscopeCallback);
CoreTiming::ScheduleEvent(pad_update_ticks, pad_update_event);
}
void Shutdown() {
shared_mem = nullptr;
event_pad_or_touch_1 = nullptr;
event_pad_or_touch_2 = nullptr;
event_accelerometer = nullptr;
event_gyroscope = nullptr;
event_debug_pad = nullptr;
UnloadInputDevices();
}
void ReloadInputDevices() {
is_device_reload_pending.store(true);
}
} // namespace HID
void locate_controls()
{
m_base.set_client_dimension(dimension_type{ width_type{ 36 }, height_type{ 10 } });
m_p_application_image->fit_to_content();
m_p_application_image->set_position(position_type{ left_type{ 2 }, top_type{ 1 } });
const auto label_left =
left_type{ 2 } +
tetengo2::gui::dimension<dimension_type>::width(m_p_application_image->dimension()) +
left_type{ 1 };
m_p_title_label->fit_to_content();
m_p_title_label->set_position(position_type{ label_left, top_type{ 1 } });
m_p_copyright_label->fit_to_content();
m_p_copyright_label->set_position(position_type{ label_left, top_type{ 3 } });
m_p_link_label->fit_to_content();
m_p_link_label->set_position(position_type{ label_left, top_type{ 5 } });
m_p_ok_button->set_dimension(dimension_type{ width_type{ 8 }, height_type{ 2 } });
m_p_ok_button->set_position(position_type{ left_type{ 26 }, top_type{ 7 } });
}
int ReadLiveStream(unsigned char *pBuffer, unsigned int iBufferSize)
{
int ret = g_pvr_client->read_data(pBuffer, iBufferSize);
return ret;
}
void MetadataManager::refreshActiveMetadata(std::unique_ptr<CollectionMetadata> remoteMetadata) {
LOG(1) << "Refreshing the active metadata from "
<< (_activeMetadataTracker->metadata ? _activeMetadataTracker->metadata->toStringBasic()
: "(empty)")
<< ", to " << (remoteMetadata ? remoteMetadata->toStringBasic() : "(empty)");
stdx::lock_guard<stdx::mutex> scopedLock(_managerLock);
// Collection is not sharded anymore
if (!remoteMetadata) {
log() << "Marking collection as not sharded.";
_receivingChunks.clear();
_rangesToClean.clear();
_setActiveMetadata_inlock(nullptr);
return;
}
invariant(!remoteMetadata->getCollVersion().isWriteCompatibleWith(ChunkVersion::UNSHARDED()));
invariant(!remoteMetadata->getShardVersion().isWriteCompatibleWith(ChunkVersion::UNSHARDED()));
// Collection is not sharded currently
if (!_activeMetadataTracker->metadata) {
log() << "Marking collection as sharded with " << remoteMetadata->toStringBasic();
invariant(_receivingChunks.empty());
invariant(_rangesToClean.empty());
_setActiveMetadata_inlock(std::move(remoteMetadata));
return;
}
// If the metadata being installed has a different epoch from ours, this means the collection
// was dropped and recreated, so we must entirely reset the metadata state
if (_activeMetadataTracker->metadata->getCollVersion().epoch() !=
remoteMetadata->getCollVersion().epoch()) {
log() << "Overwriting collection metadata due to epoch change.";
_receivingChunks.clear();
_rangesToClean.clear();
_setActiveMetadata_inlock(std::move(remoteMetadata));
return;
}
// We already have newer version
if (_activeMetadataTracker->metadata->getCollVersion() >= remoteMetadata->getCollVersion()) {
LOG(1) << "Attempted to refresh active metadata "
<< _activeMetadataTracker->metadata->toStringBasic() << " with an older "
<< remoteMetadata->toStringBasic();
return;
}
// Resolve any receiving chunks, which might have completed by now
for (auto it = _receivingChunks.begin(); it != _receivingChunks.end();) {
const BSONObj min = it->first;
const BSONObj max = it->second;
// Our pending range overlaps at least one chunk
if (rangeMapContains(remoteMetadata->getChunks(), min, max)) {
// The remote metadata contains a chunk we were earlier in the process of receiving, so
// we deem it successfully received.
LOG(2) << "Verified chunk " << ChunkRange(min, max).toString()
<< " was migrated earlier to this shard";
_receivingChunks.erase(it++);
continue;
} else if (!rangeMapOverlaps(remoteMetadata->getChunks(), min, max)) {
++it;
continue;
}
// Partial overlap indicates that the earlier migration has failed, but the chunk being
// migrated underwent some splits and other migrations and ended up here again. In this
// case, we will request full reload of the metadata. Currently this cannot happen, because
// all migrations are with the explicit knowledge of the recipient shard. However, we leave
// the option open so that chunk splits can do empty chunk move without having to notify the
// recipient.
RangeVector overlappedChunks;
getRangeMapOverlap(remoteMetadata->getChunks(), min, max, &overlappedChunks);
for (const auto& overlapChunkMin : overlappedChunks) {
auto itRecv = _receivingChunks.find(overlapChunkMin.first);
invariant(itRecv != _receivingChunks.end());
const ChunkRange receivingRange(itRecv->first, itRecv->second);
_receivingChunks.erase(itRecv);
// Make sure any potentially partially copied chunks are scheduled to be cleaned up
_addRangeToClean_inlock(receivingRange);
}
// Need to reset the iterator
it = _receivingChunks.begin();
}
// For compatibility with the current range deleter, which is driven entirely by the contents of
// the CollectionMetadata update the pending chunks
for (const auto& receivingChunk : _receivingChunks) {
ChunkType chunk;
chunk.setMin(receivingChunk.first);
chunk.setMax(receivingChunk.second);
remoteMetadata = remoteMetadata->clonePlusPending(chunk);
}
_setActiveMetadata_inlock(std::move(remoteMetadata));
}
bool IsTimeshifting(void)
{
return g_pvr_client->is_timeshifting();
}
void Stage::process(void)
{
static ProcessingState last_processing_state = ProcessingState::Idle;
static std::unique_ptr<StageBuilder> builder;
bool done = false;
// Have we changed states?
if (impl->processing_state_ != last_processing_state)
{
// Clean up the last state if needed.
switch (last_processing_state)
{
case ProcessingState::SmoothTerrain:
impl->UpdateAllColumnData();
break;
default:
break;
}
// Update the last processing state.
last_processing_state = impl->processing_state_;
// Initialize the new state if needed.
switch (impl->processing_state_)
{
case ProcessingState::GenerateTerrain:
builder.reset(
new StageBuilderTerrain(*this, impl->seed_,
Settings::terrainStageHeight,
Settings::terrainFeatureHeight,
Settings::terrainFrequency,
Settings::terrainOctaveCount,
Settings::terrainPersistence,
Settings::terrainLacunarity));
break;
case ProcessingState::AddDeposits:
builder.reset(new StageBuilderDeposits(*this, impl->seed_));
break;
case ProcessingState::AddLakes:
builder.reset(
new StageBuilderLakes(*this, impl->seed_,
Settings::terrainSeaLevel));
break;
case ProcessingState::AddBeaches:
builder.reset(
new StageBuilderBeaches(*this, impl->seed_,
Settings::terrainSeaLevel));
break;
case ProcessingState::AddRivers:
builder.reset(
new StageBuilderRivers(*this, impl->seed_,
Settings::terrainSeaLevel));
break;
case ProcessingState::AddFlora:
builder.reset(
new StageBuilderFlora(*this, impl->seed_,
Settings::terrainPlainsThreshold,
Settings::terrainForestThreshold));
break;
case ProcessingState::AddFauna:
// TODO: create builder for this!
builder.reset();
break;
case ProcessingState::SetPlayerKnowledge:
builder.reset(new StageBuilderKnownStatus(*this, impl->seed_));
break;
default:
builder.reset();
break;
}
}
if (builder.get() != nullptr)
{
done = builder->Build();
}
else
{
done = true;
}
// Other stuff to do while in the state.
switch (impl->processing_state_)
{
case ProcessingState::Idle:
// This is the state prior to world generation.
break;
case ProcessingState::GenerateTerrain:
if (done)
{
impl->processing_state_ = ProcessingState::AddDeposits;
}
break;
case ProcessingState::AddDeposits:
if (done)
{
impl->UpdateAllColumnData();
impl->processing_state_ = ProcessingState::AddLakes;
}
break;
case ProcessingState::AddLakes:
if (done)
{
impl->processing_state_ = ProcessingState::AddBeaches;
}
break;
case ProcessingState::AddBeaches:
if (done)
{
impl->processing_state_ = ProcessingState::AddRivers;
}
break;
case ProcessingState::AddRivers:
if (done)
{
impl->UpdateAllColumnData();
impl->processing_state_ = ProcessingState::AddFlora;
}
break;
case ProcessingState::AddFlora:
if (done)
{
impl->processing_state_ = ProcessingState::AddFauna;
}
break;
case ProcessingState::AddFauna:
impl->processing_state_ = ProcessingState::SetPlayerKnowledge;
break;
case ProcessingState::SetPlayerKnowledge:
if (done)
{
std::cout << "Terrain generation complete. Moving to PAUSED state."
<< std::endl;
// At this point it's okay to do map rendering.
impl->okay_to_render_map_ = true;
impl->processing_state_ = ProcessingState::Paused;
}
break;
case ProcessingState::Paused:
// This is the state when world processing is paused.
break;
case ProcessingState::Running:
// This is the state when world processing is running.
impl->UpdateAllColumnData();
break;
case ProcessingState::Halted:
// This is the state when world processing is halted.
break;
default:
break;
}
}
void ADDON_Destroy()
{
g_pvr_client.reset();
m_bCreated = false;
m_CurStatus = ADDON_STATUS_UNKNOWN;
}
void CGUIEPGGridContainerModel::Refresh(const std::unique_ptr<CFileItemList> &items, const CDateTime &gridStart, const CDateTime &gridEnd, int iRulerUnit, int iBlocksPerPage, float fBlockSize)
{
Reset();
////////////////////////////////////////////////////////////////////////
// Create programme & channel items
m_programmeItems.reserve(items->Size());
CFileItemPtr fileItem;
int iLastChannelID = -1;
ItemsPtr itemsPointer;
itemsPointer.start = 0;
CPVRChannelPtr channel;
int j = 0;
for (int i = 0; i < items->Size(); ++i)
{
fileItem = items->Get(i);
if (!fileItem->HasEPGInfoTag() || !fileItem->GetEPGInfoTag()->HasChannel())
continue;
m_programmeItems.emplace_back(fileItem);
channel = fileItem->GetEPGInfoTag()->Channel();
if (!channel)
continue;
int iCurrentChannelID = channel->ChannelID();
if (iCurrentChannelID != iLastChannelID)
{
if (j > 0)
{
itemsPointer.stop = j - 1;
m_epgItemsPtr.emplace_back(itemsPointer);
itemsPointer.start = j;
}
iLastChannelID = iCurrentChannelID;
m_channelItems.emplace_back(CFileItemPtr(new CFileItem(channel)));
}
++j;
}
if (!m_programmeItems.empty())
{
itemsPointer.stop = m_programmeItems.size() - 1;
m_epgItemsPtr.emplace_back(itemsPointer);
}
/* check for invalid start and end time */
if (gridStart >= gridEnd)
{
// default to start "now minus GRID_START_PADDING minutes" and end "start plus one page".
m_gridStart = CDateTime::GetUTCDateTime() - CDateTimeSpan(0, 0, GetGridStartPadding(), 0);
m_gridEnd = m_gridStart + CDateTimeSpan(0, 0, iBlocksPerPage * MINSPERBLOCK, 0);
}
else if (gridStart > (CDateTime::GetUTCDateTime() - CDateTimeSpan(0, 0, GetGridStartPadding(), 0)))
{
// adjust to start "now minus GRID_START_PADDING minutes".
m_gridStart = CDateTime::GetUTCDateTime() - CDateTimeSpan(0, 0, GetGridStartPadding(), 0);
m_gridEnd = gridEnd;
}
else
{
m_gridStart = gridStart;
m_gridEnd = gridEnd;
}
// roundup
m_gridStart = CDateTime(m_gridStart.GetYear(), m_gridStart.GetMonth(), m_gridStart.GetDay(), m_gridStart.GetHour(), m_gridStart.GetMinute() >= 30 ? 30 : 0, 0);
m_gridEnd = CDateTime(m_gridEnd.GetYear(), m_gridEnd.GetMonth(), m_gridEnd.GetDay(), m_gridEnd.GetHour(), m_gridEnd.GetMinute() >= 30 ? 30 : 0, 0);
////////////////////////////////////////////////////////////////////////
// Create ruler items
CDateTime ruler;
ruler.SetFromUTCDateTime(m_gridStart);
CDateTime rulerEnd;
rulerEnd.SetFromUTCDateTime(m_gridEnd);
CFileItemPtr rulerItem(new CFileItem(ruler.GetAsLocalizedDate(true)));
rulerItem->SetProperty("DateLabel", true);
m_rulerItems.emplace_back(rulerItem);
const CDateTimeSpan unit(0, 0, iRulerUnit * MINSPERBLOCK, 0);
for (; ruler < rulerEnd; ruler += unit)
{
rulerItem.reset(new CFileItem(ruler.GetAsLocalizedTime("", false)));
rulerItem->SetLabel2(ruler.GetAsLocalizedDate(true));
m_rulerItems.emplace_back(rulerItem);
}
FreeItemsMemory();
////////////////////////////////////////////////////////////////////////
// Create epg grid
const CDateTimeSpan blockDuration(0, 0, MINSPERBLOCK, 0);
const CDateTimeSpan gridDuration(m_gridEnd - m_gridStart);
m_blocks = (gridDuration.GetDays() * 24 * 60 + gridDuration.GetHours() * 60 + gridDuration.GetMinutes()) / MINSPERBLOCK;
if (m_blocks >= MAXBLOCKS)
m_blocks = MAXBLOCKS;
else if (m_blocks < iBlocksPerPage)
m_blocks = iBlocksPerPage;
m_gridIndex.reserve(m_channelItems.size());
const std::vector<GridItem> blocks(m_blocks);
for (size_t channel = 0; channel < m_channelItems.size(); ++channel)
{
m_gridIndex.emplace_back(blocks);
CDateTime gridCursor(m_gridStart); //reset cursor for new channel
unsigned long progIdx = m_epgItemsPtr[channel].start;
unsigned long lastIdx = m_epgItemsPtr[channel].stop;
int iEpgId = m_programmeItems[progIdx]->GetEPGInfoTag()->EpgID();
int itemSize = 1; // size of the programme in blocks
int savedBlock = 0;
CFileItemPtr item;
CPVREpgInfoTagPtr tag;
for (int block = 0; block < m_blocks; ++block)
{
while (progIdx <= lastIdx)
{
item = m_programmeItems[progIdx];
tag = item->GetEPGInfoTag();
// Note: Start block of an event is start-time-based calculated block + 1,
// unless start times matches exactly the begin of a block.
if (tag->EpgID() != iEpgId || gridCursor < tag->StartAsUTC() || m_gridEnd <= tag->StartAsUTC())
break;
if (gridCursor < tag->EndAsUTC())
{
m_gridIndex[channel][block].item = item;
m_gridIndex[channel][block].progIndex = progIdx;
break;
}
progIdx++;
}
gridCursor += blockDuration;
if (block == 0)
continue;
const CFileItemPtr prevItem(m_gridIndex[channel][block - 1].item);
const CFileItemPtr currItem(m_gridIndex[channel][block].item);
if (block == m_blocks - 1 || prevItem != currItem)
{
// special handling for last block.
int blockDelta = -1;
int sizeDelta = 0;
if (block == m_blocks - 1 && prevItem == currItem)
{
itemSize++;
blockDelta = 0;
sizeDelta = 1;
}
if (prevItem)
{
m_gridIndex[channel][savedBlock].item->SetProperty("GenreType", prevItem->GetEPGInfoTag()->GenreType());
}
else
{
CPVREpgInfoTagPtr gapTag(CPVREpgInfoTag::CreateDefaultTag());
gapTag->SetChannel(m_channelItems[channel]->GetPVRChannelInfoTag());
CFileItemPtr gapItem(new CFileItem(gapTag));
for (int i = block + blockDelta; i >= block - itemSize + sizeDelta; --i)
{
m_gridIndex[channel][i].item = gapItem;
}
}
float fItemWidth = itemSize * fBlockSize;
m_gridIndex[channel][savedBlock].originWidth = fItemWidth;
m_gridIndex[channel][savedBlock].width = fItemWidth;
itemSize = 1;
savedBlock = block;
// special handling for last block.
if (block == m_blocks - 1 && prevItem != currItem)
{
if (currItem)
{
m_gridIndex[channel][savedBlock].item->SetProperty("GenreType", currItem->GetEPGInfoTag()->GenreType());
}
else
{
CPVREpgInfoTagPtr gapTag(CPVREpgInfoTag::CreateDefaultTag());
gapTag->SetChannel(m_channelItems[channel]->GetPVRChannelInfoTag());
CFileItemPtr gapItem(new CFileItem(gapTag));
m_gridIndex[channel][block].item = gapItem;
}
m_gridIndex[channel][savedBlock].originWidth = fBlockSize; // size always 1 block here
m_gridIndex[channel][savedBlock].width = fBlockSize;
}
}
else
{
itemSize++;
}
}
}
}
void ISNewSwitch(const char *dev, const char *name, ISState *states, char *names[], int num)
{
scope->ISNewSwitch(dev, name, states, names, num);
}
bool SetFontByName(const char* name, size_t size)
{
g_fontptr.reset(new FontManager(name, size));
return true;
}
void ISNewNumber(const char *dev, const char *name, double values[], char *names[], int num)
{
scope->ISNewNumber(dev, name, values, names, num);
}
Diagnostics* Diagnostics::Get()
{
static std::unique_ptr<Diagnostics> singleton = make_unique<Diagnostics>();
return singleton.get();
}
void Enum::appendChild(std::unique_ptr<ConstantAssignment> value)
{
setAsParent(value.get());
m_children.push_back(std::move(value));
}
NcclCommList(const std::vector<int>& devices)
: comms(new ncclComm_t[devices.size()]), ndevices(devices.size()) {
CHECK(ncclCommInitAll(comms.get(), devices.size(), devices.data()));
}