Esempio n. 1
0
/**
 * Search for direct loads in the taken side of a guard
 *
 * @param firstBlock The guard's branch destination
 * @param coldPathLoads BitVector of symbol reference numbers for any direct loads seen until the merge back to mainline
 */
static void collectColdPathLoads(TR::Block* firstBlock, TR_BitVector &coldPathLoads)
   {
   TR_Stack<TR::Block*> blocksToCheck(TR::comp()->trMemory(), 8, false, stackAlloc);
   blocksToCheck.push(firstBlock);
   TR::NodeChecklist checklist(TR::comp());

   coldPathLoads.empty();
   while (!blocksToCheck.isEmpty())
      {
      TR::Block *block = blocksToCheck.pop();

      for (TR::TreeTop *tt = block->getFirstRealTreeTop(); tt->getNode()->getOpCodeValue() != TR::BBEnd; tt = tt->getNextTreeTop())
         collectDirectLoads(tt->getNode(), coldPathLoads, checklist);

      // Search for any successors that have not merged with the mainline
      for (auto itr = block->getSuccessors().begin(), end = block->getSuccessors().end(); itr != end; ++itr)
         {
         TR::Block *dest = (*itr)->getTo()->asBlock();
         if (dest != TR::comp()->getFlowGraph()->getEnd() && dest->getPredecessors().size() == 1)
            blocksToCheck.push(dest);
         }
      }
   }
Esempio n. 2
0
// This opt tries to reduce merge backs from cold code that are the result of inliner
// gnerated nopable virtual guards
// It looks for one basic pattern
//
// guard1 -> cold1
// BBEND
// BBSTART
// guard2 -> cold2
// if guard1 is the guard for a method which calls the method guard2 protects or cold1 is
// a predecessor of cold2 (a situation commonly greated by virtual guard tail splitter) we
// can transform the guards as follows when guard1 and guard2 a
// guard1 -> cold1
// BBEND
// BBSTART
// guard2 -> cold1
// This is safe because there are no trees between the guards and calling the caller will
// result in the call to the callee if we need to patch guard2. cold2 and its mergebacks
// can then be eliminated
//
// In addition this opt will try to move guard2 up from the end of a block to the
// start of the block. We can do this if guard2 is an HCR guard and there is no GC point
// between BBSTART and guard2 since HCR is a stop-the-world event.
//
// Finally, there is a simple tail splitting step run before the analysis of a guard if we
// detect that the taken side of the guard merges back in the next block - this happens
// for some empty methods and is common for Object.<init> at the top of constructors.
int32_t TR_VirtualGuardHeadMerger::perform() {
   static char *disableVGHeadMergerTailSplitting = feGetEnv("TR_DisableVGHeadMergerTailSplitting");
   TR::CFG *cfg = comp()->getFlowGraph();

   // Cache the loads for the outer guard's cold path
   TR_BitVector coldPathLoads(comp()->trMemory()->currentStackRegion());
   TR_BitVector privArgSymRefs(comp()->trMemory()->currentStackRegion());
   bool evaluatedColdPathLoads = false;

   for (TR::Block *block = optimizer()->getMethodSymbol()->getFirstTreeTop()->getNode()->getBlock();
        block; block = block->getNextBlock())
      {
      TR::Node *guard1 = block->getLastRealTreeTop()->getNode();

      if (isMergeableGuard(guard1))
         {
         if (trace())
            traceMsg(comp(), "Found mergeable guard in block_%d\n", block->getNumber());
         TR::Block *cold1 = guard1->getBranchDestination()->getEnclosingBlock();

         // check for an immediate merge back from the cold block and
         // tail split one block if we can - we only handle splitting a block
         // ending in a fallthrough, a branch or a goto for now for simplicity
         if (!disableVGHeadMergerTailSplitting &&
             (cold1->getSuccessors().size() == 1) &&
             cold1->hasSuccessor(block->getNextBlock()) &&
             cold1->getLastRealTreeTop()->getNode()->getOpCode().isGoto())
            {
            // TODO handle moving code earlier in the block down below the guard
            // tail split
            if ((block->getNextBlock()->getSuccessors().size() == 1) ||
                ((block->getNextBlock()->getSuccessors().size() == 2) &&
                 block->getNextBlock()->getLastRealTreeTop()->getNode()->getOpCode().isBranch()) &&
                performTransformation(comp(), "%sCloning block_%d and placing clone after block_%d to reduce HCR guard nops\n", OPT_DETAILS, block->getNextBlock()->getNumber(), cold1->getNumber()))
               tailSplitBlock(block, cold1);
            }

         // guard motion is fairly complex but what we want to achieve around guard1 is a sequence
         // of relocated privarg blocks, followed by a sequence of runtime patchable guards going to
         // guard1's cold block, followed by a sequence of stop-the-world guards going to guard1's
         // cold block
         //
         // The following code is to setup the various insert points based on the following diagrams
         // of basic blocks:
         //
         // start:               setup:                          end result after moving runtime guard'
         //                       |       |                        +-------+ <-- privargIns
         //                       |       | <-- privargIns             |
         //                       +-------+ <-- runtimeIns         +-------+
         //   |       |               |                            | Guard'|
         //   |       |               V                            +-------+ <-- runtimeIns
         //   +-------+           +-------+                            |
         //   | Guard |           | Guard |                            V
         //   +-------+           +-------+ <-- HCRIns             +-------+
         //       |        ===>       |                    ===>    | Guard |
         //       V                   V                            +-------+ <-- HCRIns
         //   +-------+           +-------+                            |
         //   |       |           |       |                            V
         //   |       |           |       |                        +-------+
         //
         // Note we always split the block - this may create an empty block but preserves the incoming
         // control flow we leave the rest to block extension to fix later

         block = block->split(block->getLastRealTreeTop(), cfg, true, false);
         TR::Block *privargIns = block->getPrevBlock();
         TR::Block *runtimeIns = block->getPrevBlock();
         TR::Block *HCRIns = block;

         // New outer guard so cold paths must be evaluated
         evaluatedColdPathLoads = false;

         // scan for candidate guards to merge with guard1 identified above
         for (TR::Block *nextBlock = block->getNextBlock(); nextBlock; nextBlock = nextBlock->getNextBlock())
            {
            if (!(nextBlock->getPredecessors().size() == 1) ||
                !nextBlock->hasPredecessor(block))
               {
               break;
               }

            TR::TreeTop *guard2Tree = NULL;
            if (isMergeableGuard(nextBlock->getFirstRealTreeTop()->getNode()))
               {
               guard2Tree = nextBlock->getFirstRealTreeTop();
               }
            else if (isMergeableGuard(nextBlock->getLastRealTreeTop()->getNode()))
               {
               guard2Tree = nextBlock->getLastRealTreeTop();
               }
            else
               break;

            TR::Node *guard2 = guard2Tree->getNode();
            TR::Block *guard2Block = nextBlock;

            // It is not possible to shift an OSR guard unless the destination is already an OSR point
            // as the necessary OSR state will not be available
            if (guard2->isOSRGuard() && !guard1->isOSRGuard())
               break;

            TR::Block *insertPoint = isStopTheWorldGuard(guard2) ? HCRIns : runtimeIns;
            if (!safeToMoveGuard(insertPoint, guard2Tree, guard1->getBranchDestination(), privArgSymRefs))
               break;

            // now we figure out if we can redirect guard2 to guard1's cold block
            // ie can we do the head merge
            TR::Block *cold2 = guard2->getBranchDestination()->getEnclosingBlock();
            if (guard1->getInlinedSiteIndex() == guard2->getInlinedSiteIndex())
               {
               if (trace())
                  traceMsg(comp(), "  Guard1 [%p] is guarding the same call as Guard2 [%p] - proceeding with guard merging\n", guard1, guard2);
               }
            else if (guard2->getInlinedSiteIndex() > -1 &&
                guard1->getInlinedSiteIndex() == TR::comp()->getInlinedCallSite(guard2->getInlinedSiteIndex())._byteCodeInfo.getCallerIndex())
               {
               if (trace())
                  traceMsg(comp(), "  Guard1 [%p] is the caller of Guard2 [%p] - proceeding with guard merging\n", guard1, guard2);
               }
            else if ((cold1->getSuccessors().size() == 1) &&
                     cold1->hasSuccessor(cold2))
               {
               if (trace())
                  traceMsg(comp(), "  Guard1 cold destination block_%d has guard2 cold destination block_%d as its only successor - proceeding with guard merging\n", cold1->getNumber(), cold2->getNumber());
               }
            else
               {
               if (trace())
                  traceMsg(comp(), "  Cold1 block_%d and cold2 block_%d of guard2 [%p] in unknown relationship - abandon the merge attempt\n", cold1->getNumber(), cold2->getNumber(), guard2);
               break;
               }

            // Runtime guards will shift their privargs, so it is necessary to check such a move is safe
            // This is possible if a privarg temp was recycled for the inner call site, with a prior use as an
            // argument for the outer call site. As the privargs for the inner call site must be evaluated before
            // both guards, this would result in the recycled temp holding the incorrect value if the guard is ever
            // taken.
            if (!isStopTheWorldGuard(guard2))
               {
               if (!evaluatedColdPathLoads)
                  {
                  collectColdPathLoads(cold1, coldPathLoads);
                  evaluatedColdPathLoads = true;
                  }

               if (coldPathLoads.intersects(privArgSymRefs))
                  {
                  if (trace())
                     traceMsg(comp(), "  Recycled temp live in cold1 block_%d and used as privarg before guard2 [%p] - stop guard merging", cold1->getNumber(), guard2);
                  break;
                  }
               }

            if (!performTransformation(comp(), "%sRedirecting %s guard [%p] in block_%d to parent guard cold block_%d\n", OPT_DETAILS, isStopTheWorldGuard(guard2) ? "stop the world" : "runtime", guard2, guard2Block->getNumber(), cold1->getNumber()))
                  continue;

            if (guard2->getBranchDestination() != guard1->getBranchDestination())
               guard2Block->changeBranchDestination(guard1->getBranchDestination(), cfg);

            if (guard2Tree != guard2Block->getFirstRealTreeTop())
               {
               cfg->setStructure(NULL);

               // We should leave code ahead of an HCR guard in place because:
               // 1, it might have side effect to runtime guards after it, moving it up might cause us to falsely merge
               //    the subsequent runtime guards
               // 2, it might contain live monitor, moving it up above a guard can affect the monitor's live range
               if (!isStopTheWorldGuard(guard2))
                  {
	          // the block created above guard2 contains only privarg treetops or monitor stores if
                  // guard2 is a runtime-patchable guard and is safe to merge. We need to move the priv
                  // args up to the runtime insert point and leave the monitor stores in place
                  // It's safe to do so because there is no data dependency between the monitor store and
                  // the priv arg store, because the priv arg store does not load the value from the temp
                  // holding the monitored object

                  // Split priv arg stores from monitor stores
                  // Monitor store is generated for the caller of the method guard2 protects, so should appear before
                  // priv arg stores for the method guard2 protects
                  TR::Block *privargBlock = guard2Block;
                  guard2Block = splitRuntimeGuardBlock(comp(), guard2Block, cfg);
                  if (privargBlock != guard2Block)
                     {
                     if (trace())
                        traceMsg(comp(), "  Moving privarg block_%d after block_%d\n", privargBlock->getNumber(), privargIns->getNumber());

                     moveBlockAfterDest(cfg, privargBlock, privargIns);

                     if (HCRIns == privargIns)
                        HCRIns = privargBlock;
                     if (runtimeIns == privargIns)
                        runtimeIns = privargBlock;
                     privargIns = privargBlock;

                     // refresh the insertPoint since it could be stale after the above updates
                     insertPoint = runtimeIns;
                     }
                  }

               guard2Block = guard2Block->split(guard2Tree, cfg, true, false);
               if (trace())
                  traceMsg(comp(), "  Created new block_%d to hold guard [%p] from block_%d\n", guard2Block->getNumber(), guard2, guard2Block->getNumber());
               }

            if (insertPoint != guard2Block->getPrevBlock())
               {
               TR::DebugCounter::incStaticDebugCounter(comp(), TR::DebugCounter::debugCounterName(comp(), "headMerger/%s_%s/(%s)", isStopTheWorldGuard(guard1) ? "stop the world" : "runtime", isStopTheWorldGuard(guard2) ? "stop the world" : "runtime", comp()->signature()));
               cfg->setStructure(NULL);

               block = nextBlock = guard2Block->getPrevBlock();
               if (trace())
                  traceMsg(comp(), "  Moving guard2 block block_%d after block_%d\n", guard2Block->getNumber(), insertPoint->getNumber());

               moveBlockAfterDest(cfg, guard2Block, insertPoint);

               if (HCRIns == insertPoint)
                  HCRIns = guard2Block;
               if (runtimeIns == insertPoint)
                  runtimeIns = guard2Block;
               }
            else
               {
               block = guard2Block;
               }
            guard1 = guard2;
            }
         }
      }
   return 1;
}