C++ (Cpp) ADC_SMPR2_SMP_SENSORの例

コード例 #1

ファイル: main.c プロジェクト: Highway-Man/ConVEX-Installer

/*
 * ADC conversion group.
 * Mode:        Linear buffer, 4 samples of 2 channels, SW triggered.
 * Channels:    IN10   (48 cycles sample time)
 *              Sensor (192 cycles sample time)
 */
static const ADCConversionGroup adcgrpcfg = {
  FALSE,
  ADC_GRP1_NUM_CHANNELS,
  adccb,
  NULL,
  /* HW dependent part.*/
  0,                        /* CR1 */
  ADC_CR2_SWSTART,          /* CR2 */
  0,
  ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192),
  0,
  ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS),
  0,
  0,
  0,
  ADC_SQR5_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR5_SQ1_N(ADC_CHANNEL_SENSOR)
};

/*
 * PWM configuration structure.
 * Cyclic callback enabled, channels 1 and 2 enabled without callbacks,
 * the active state is a logic one.
 */
static PWMConfig pwmcfg = {
  10000,                                    /* 10kHz PWM clock frequency.   */

コード例 #2

ファイル: main.c プロジェクト: mandrake/ChibiOS-Tiva

/*
 * ADC conversion group.
 * Mode:        Continuous, 16 samples of 8 channels, SW triggered.
 * Channels:    IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef.
 */
static const ADCConversionGroup adcgrpcfg2 = {
  TRUE,
  ADC_GRP2_NUM_CHANNELS,
  adccallback,
  adcerrorcallback,
  0,                        /* CR1 */
  ADC_CR2_SWSTART,          /* CR2 */
  0,                        /* SMPR1 */
  ADC_SMPR2_SMP_AN11(ADC_SAMPLE_48) | ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) |
  ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192) | ADC_SMPR2_SMP_VREF(ADC_SAMPLE_192),
  0,                        /* SMPR3 */
  ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS),
  0, 0,                     /* SQR2, SQR3 */
  ADC_SQR4_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR4_SQ7_N(ADC_CHANNEL_VREFINT),
  ADC_SQR5_SQ6_N(ADC_CHANNEL_IN11)   | ADC_SQR5_SQ5_N(ADC_CHANNEL_IN10) |
  ADC_SQR5_SQ4_N(ADC_CHANNEL_IN11)   | ADC_SQR5_SQ3_N(ADC_CHANNEL_IN10) |
  ADC_SQR5_SQ2_N(ADC_CHANNEL_IN11)   | ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10)
};

/*
 * Red LEDs blinker thread, times are in milliseconds.
 */
static THD_WORKING_AREA(waThread1, 128);
static THD_FUNCTION(Thread1, arg) {