void
ADM_Process_send_event(int argc, char *argv[])
{
rscp_msg_t Message;
struct timespec Timeout;
static data_buffer_t DataBuffer;
dp_send_alert_t *Parms;
char *Alert;
if ((argc != 3) && (argc != 4)) {
usage();
exit(-1);
}
if (argc == 4) {
if (strcasecmp(argv[2], "-c") != 0) {
usage();
exit(-1);
}
}
ADM_Start();
Parms = (dp_send_alert_t *)&DataBuffer;
Alert = (char *)(&((char *)Parms)[sizeof (dp_send_alert_t)]);
if (argc == 3) {
Parms->critical = 0;
(void) strcpy(Alert, argv[2]);
} else {
Parms->critical = 1;
(void) strcpy(Alert, argv[3]);
}
if (strlen(Alert) > 80) {
(void) fprintf(stderr, "\n%s\n\n",
gettext("scadm: event message can't exceed 80 characters"));
exit(-1);
}
Message.type = DP_SEND_ALERT;
Message.len = sizeof (dp_send_alert_t) + strlen(Alert) + 1;
Message.data = Parms;
ADM_Send(&Message);
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout, DP_SEND_ALERT_R,
sizeof (dp_send_alert_r_t));
if (*(int *)Message.data != 0) {
(void) fprintf(stderr, "\n%s\n\n",
gettext("scadm: could not send alert"));
exit(-1);
}
ADM_Free(&Message);
}
static void
ADM_Process_old_event_log()
{
char timebuf[32];
char messBuff[256];
char eventMsgBuf[256];
rscp_msg_t Message;
struct timespec Timeout;
dp_get_event_log_r_t *rscReply;
char *datap;
dp_event_log_entry_t entry;
int i, len, entryhdrsize;
ADM_Start();
Message.type = DP_GET_EVENT_LOG;
Message.len = 0;
Message.data = NULL;
ADM_Send(&Message);
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout,
DP_GET_EVENT_LOG_R, sizeof (*rscReply));
/* Print the event log messages */
rscReply = (dp_get_event_log_r_t *)Message.data;
datap = (char *)rscReply->data;
for (i = 0; i < rscReply->entry_count; i++) {
entryhdrsize = sizeof (entry) - sizeof (entry.param);
(void) memcpy(&entry, datap, entryhdrsize);
datap += entryhdrsize;
(void) memcpy(&entry.param, datap, entry.paramLen);
(void) strftime(timebuf, sizeof (timebuf), "%b %d %H:%M:%S",
gmtime((time_t *)&entry.eventTime));
(void) sprintf(messBuff, "%s : %08lx: \"", timebuf,
entry.eventId);
len = expandEventLogMessage(entry.eventId, entry.param,
entry.paramLen, eventMsgBuf);
(void) strncat(messBuff, eventMsgBuf, len);
(void) strcat(messBuff, "\"\r\n");
(void) printf(messBuff);
datap += entry.paramLen;
}
ADM_Free(&Message);
}
void
ADM_Process_fru_log(int all)
{
rscp_msg_t Message;
struct timespec Timeout;
dp_get_config_log_r_t *rscReply;
rsci64 bytes_remaining, seqno;
rsci16 request_size, response_size;
dp_get_config_log_t rscCmd;
ADM_Start();
/*
* Start by sending a zero-length request to ALOM, so that
* we can learn the length of the console log. We expect
* ALOM to return the length of the entire log. We get
* a snapshot of the length of the log here - it may however
* continue to grow as we're reading it. We read only as
* much of the log as we get in this snapshot.
*/
rscCmd.start_seq = 0;
rscCmd.length = 0;
Message.type = DP_GET_CONFIG_LOG;
Message.len = sizeof (rscCmd);
Message.data = (char *)&rscCmd;
ADM_Send(&Message);
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout,
DP_GET_CONFIG_LOG_R, sizeof (*rscReply));
rscReply = (dp_get_config_log_r_t *)Message.data;
/*
* If we do not want the whole log, and the log is bigger than
* the length limit, then fetch just the last ADM_DEFAULT_LOG_LENGTH
* bytes from the log. Else just get the whole thing.
*/
if ((all == 0) && (rscReply->remaining_log_bytes >
ADM_DEFAULT_LOG_LENGTH)) {
bytes_remaining = ADM_DEFAULT_LOG_LENGTH;
seqno = (rscReply->remaining_log_bytes +
rscReply->next_seq) - bytes_remaining;
} else {
bytes_remaining = rscReply->remaining_log_bytes;
seqno = rscReply->next_seq;
}
request_size = sizeof (rscReply->buffer);
ADM_Free(&Message);
/*
* Timeout for RSC response.
*/
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
/*
* This loop runs as long as there is data in the log, or until
* we hit the default limit (above). It's possible that ALOM may
* shrink the log - we need to account for this. If ALOM returns
* no data, we bail out.
*/
while (bytes_remaining) {
rscCmd.start_seq = seqno;
rscCmd.length = (bytes_remaining < request_size) ?
bytes_remaining : request_size;
Message.type = DP_GET_CONFIG_LOG;
Message.len = sizeof (rscCmd);
Message.data = (char *)&rscCmd;
ADM_Send(&Message);
ADM_Recv(&Message, &Timeout,
DP_GET_CONFIG_LOG_R, sizeof (*rscReply));
rscReply = (dp_get_config_log_r_t *)Message.data;
/* If ALOM returns zero bytes, we're done. */
response_size = rscReply->length;
if (response_size == 0) {
ADM_Free(&Message);
break;
}
bytes_remaining -= response_size;
if (rscReply->remaining_log_bytes < bytes_remaining) {
bytes_remaining = rscReply->remaining_log_bytes;
}
/*
* If the byte at the original sequence number is no
* longer in the log, print a message.
*/
if (rscReply->next_seq > seqno + response_size) {
printf(gettext("\nscadm: lost %d bytes of log data\n"),
rscReply->next_seq - (seqno + response_size));
}
seqno = rscReply->next_seq;
/* Print the config log */
if (fwrite(rscReply->buffer, sizeof (char), response_size,
stdout) != response_size) {
perror(gettext("\ncouldn't write config log buffer"
" to stdout"));
ADM_Free(&Message);
break;
}
ADM_Free(&Message);
}
putchar('\n');
}
static int
ADM_Process_new_event_log(int all)
{
char timebuf[32];
char messBuff[256];
char eventMsgBuf[256];
rscp_msg_t Message;
struct timespec Timeout;
dp_get_event_log2_r_t *rscReply;
char *datap;
dp_event_log_entry_t entry;
int i, len, entryhdrsize, sent_ok;
rsci64 events_remaining, seqno;
rsci16 request_size, returned_events;
dp_get_event_log2_t rscCmd;
ADM_Start();
/*
* Start by sending a zero-length request to ALOM, so that
* we can learn the length of the console log. We expect
* ALOM to return the length of the entire log. We get
* a snapshot of the length of the log here - it may however
* continue to grow as we're reading it. We read only as
* much of the log as we get in this snapshot.
*
* If the command fails, we quietly return failure here so
* that the caller can re-try with the old/legacy command.
*/
rscCmd.start_seq = 0;
rscCmd.length = 0;
Message.type = DP_GET_EVENT_LOG2;
Message.len = sizeof (rscCmd);
Message.data = (char *)&rscCmd;
if (ADM_Send_ret(&Message) != 0) {
return (1);
}
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout,
DP_GET_EVENT_LOG2_R, sizeof (*rscReply));
rscReply = (dp_get_event_log2_r_t *)Message.data;
/*
* Fetch an fixed number of events from the end of
* the log if at least that many exist, and we were not
* asked to fetch all the events.
*/
if ((all == 0) &&
(rscReply->remaining_log_events > DEFAULT_NUM_EVENTS)) {
events_remaining = DEFAULT_NUM_EVENTS;
seqno = (rscReply->remaining_log_events +
rscReply->next_seq) - events_remaining;
} else {
events_remaining = rscReply->remaining_log_events;
seqno = rscReply->next_seq;
}
request_size = sizeof (rscReply->buffer);
ADM_Free(&Message);
/*
* This loop runs as long as there is data in the log, or until
* we hit the default limit (above). It's possible that ALOM may
* shrink the log - we need to account for this. If ALOM returns
* no data, we bail out.
*/
while (events_remaining) {
rscCmd.start_seq = seqno;
rscCmd.length = request_size;
Message.type = DP_GET_EVENT_LOG2;
Message.len = sizeof (rscCmd);
Message.data = (char *)&rscCmd;
ADM_Send(&Message);
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout,
DP_GET_EVENT_LOG2_R, sizeof (*rscReply));
rscReply = (dp_get_event_log2_r_t *)Message.data;
/* If ALOM returns zero events, we're done. */
returned_events = rscReply->num_events;
if (returned_events == 0) {
ADM_Free(&Message);
break;
}
/*
* if the event at the original sequence number is no
* longer in the log, print a message
*/
if (seqno + returned_events < rscReply->next_seq) {
printf(gettext("\nscadm: lost %d events\n"),
rscReply->next_seq - (seqno + returned_events));
}
/*
* get ready for next main loop iteration
*/
seqno = rscReply->next_seq;
events_remaining -= returned_events;
/* Print the event log messages */
datap = rscReply->buffer;
for (i = 0; i < returned_events; i++) {
entryhdrsize = sizeof (entry) - sizeof (entry.param);
(void) memcpy(&entry, datap, entryhdrsize);
datap += entryhdrsize;
(void) memcpy(&entry.param, datap, entry.paramLen);
(void) strftime(timebuf, sizeof (timebuf),
"%b %d %H:%M:%S",
gmtime((time_t *)&entry.eventTime));
(void) sprintf(messBuff, "%s : %08lx: \"", timebuf,
entry.eventId);
len = expandEventLogMessage(entry.eventId, entry.param,
entry.paramLen, eventMsgBuf);
(void) strncat(messBuff, eventMsgBuf, len);
(void) strcat(messBuff, "\"\r\n");
(void) printf(messBuff);
datap += entry.paramLen;
}
ADM_Free(&Message);
}
return (0);
}
void
ADM_Process_status(int verbose)
{
rscp_msg_t Message;
struct timespec Timeout;
dp_rsc_status_r_t *rscStatus;
ADM_Start();
Message.type = DP_RSC_STATUS;
Message.len = 0;
Message.data = NULL;
ADM_Send(&Message);
Timeout.tv_nsec = 0;
Timeout.tv_sec = ADM_TIMEOUT;
ADM_Recv(&Message, &Timeout,
DP_RSC_STATUS_R, sizeof (dp_rsc_status_r_t));
/* Print the status */
rscStatus = (dp_rsc_status_r_t *)Message.data;
(void) printf("\n");
(void) printf("%s v%d.%d\n",
gettext("SC Version"),
rscStatus->release_rev_major, rscStatus->release_rev_minor);
(void) printf("%s v%d.%d.%d\n",
gettext("SC Bootmon Version: "),
rscStatus->bootmon_rev_major, rscStatus->bootmon_rev_minor,
rscStatus->bootmon_rev_micro);
if (verbose) {
(void) printf("%s %08lX\r\n\n", gettext("SC Bootmon checksum:"),
rscStatus->bm_cksum);
}
(void) printf("%s v%d.%d.%d\n",
gettext("SC Firmware Version: "),
rscStatus->main_rev_major, rscStatus->main_rev_minor,
rscStatus->main_rev_micro);
if (verbose) {
(void) printf("%s %02d\r\n", gettext("SC Build Release:"),
rscStatus->rsc_build);
}
(void) printf("\n");
if (verbose) {
(void) printf("%s %08lX\r\n\n",
gettext("SC firmware checksum:"), rscStatus->fw_cksum);
(void) printf("%s %s\r\n\n",
gettext("SC firmware built:"), rscStatus->creationDate);
(void) printf("%s %ld%s\r\n\r\n",
gettext("SC System Memory Size:"), rscStatus->sys_mem,
gettext("MB"));
(void) printf("%s %lx\r\n\r\n",
gettext("SC NVRAM Version ="), rscStatus->nvram_version);
}
/*
* Not currently implemented in firmware
* (void) printf("%s = %d\n",
* gettext("Users currently logged in"), rscStatus->nusers);
*/
if (verbose) {
/* 4388953 Display SC board type */
(void) printf("%s %d\r\n\r\n",
gettext("SC hardware type:"), rscStatus->hardware_rev);
}
ADM_Free(&Message);
}
