/**
* \brief Writes data on the At45 at the specified address. Only one page of
* data is written that way; if the address is not at the beginning of the
* page, the data is written starting from this address and wraps around to
* the beginning of the page.
* \param pAt45 Pointer to an AT45 driver instance.
* \param pBuffer Data buffer.
* \param size Number of bytes to write.
* \param address Destination address on the At45.
*/
void AT45D_Write(
At45 *pAt45,
uint8_t *pBuffer,
uint32_t size,
uint32_t address)
{
uint8_t error;
SANITY_CHECK(pAt45);
SANITY_CHECK(pBuffer);
SANITY_CHECK(size <= pAt45->pDesc->pageSize);
/* Issue a page write through buffer 1 command. */
error = AT45_SendCommand(pAt45, AT45_PAGE_WRITE_BUF1, 4, pBuffer, size, address, 0, 0);
ASSERT(!error, "-F- AT45_Write: Could not issue command.\n\r");
/* Wait until the command is sent. */
while (AT45_IsBusy(pAt45)) {
AT45D_Wait(pAt45);
}
/* Wait until the At45 becomes ready again.*/
AT45D_WaitReady(pAt45);
}
/**
* \brief Reads data from the At45 inside the provided buffer. Since a continuous
* read command is used, there is no restriction on the buffer size and read address.
*
* \param pAt45 Pointer to an AT45 driver instance.
* \param pBuffer Data buffer.
* \param size Number of bytes to read.
* \param address Address at which data shall be read.
*/
extern void AT45D_Read( At45* pAt45, uint8_t* pucBuffer, uint32_t dwSize, uint32_t dwAddress )
{
uint32_t dwError ;
assert( pAt45 != NULL ) ;
assert( pucBuffer != NULL ) ;
/* Issue a continuous read array command. */
dwError = AT45_SendCommand( pAt45, AT45_CONTINUOUS_READ_LEG, 8, pucBuffer, dwSize, dwAddress, 0, 0 ) ;
assert( !dwError ) ;
/* Wait for the read command to execute. */
while ( AT45_IsBusy( pAt45 ) )
{
AT45D_Wait( pAt45 ) ;
}
}
//------------------------------------------------------------------------------
/// Erases a page of data at the given address in the At45.
/// \param pAt45 Pointer to a At45 driver instance.
/// \param address Address of page to erase.
//------------------------------------------------------------------------------
void AT45D_Erase(At45 *pAt45, unsigned int address)
{
unsigned char error;
SANITY_CHECK(pAt45);
// Issue a page erase command.
error = AT45_SendCommand(pAt45, AT45_PAGE_ERASE, 4, 0, 0, address, 0, 0);
ASSERT(!error, "-F- AT45_Erase: Could not issue command.\n\r");
// Wait for end of transfer
while (AT45_IsBusy(pAt45))
AT45D_Wait(pAt45);
// Poll until the At45 has completed the erase operation
AT45D_WaitReady(pAt45);
}
/**
* \brief Retrieves and returns the At45 current status, or 0 if an error happened.
*
* \param pAt45 Pointer to an AT45 driver instance.
*/
uint8_t AT45D_GetStatus(At45 *pAt45)
{
uint8_t error;
uint8_t status;
SANITY_CHECK(pAt45);
/* Issue a status register read command*/
error = AT45_SendCommand(pAt45, AT45_STATUS_READ, 1, &status, 1, 0, 0, 0);
ASSERT(!error, "-F- AT45_GetStatus: Failed to issue command.\n\r");
/* Wait for command to terminate*/
while (AT45_IsBusy(pAt45)) {
AT45D_Wait(pAt45);
}
return status;
}
//------------------------------------------------------------------------------
/// Retrieves and returns the At45 current status, or 0 if an error
/// happened.
/// \param pAt45 Pointer to a At45 driver instance.
//------------------------------------------------------------------------------
unsigned char AT45D_GetStatus(At45 *pAt45)
{
unsigned char error;
unsigned char status;
SANITY_CHECK(pAt45);
// Issue a status register read command
error = AT45_SendCommand(pAt45, AT45_STATUS_READ, 1, &status, 1, 0, 0, 0);
ASSERT(!error, "-F- AT45_GetStatus: Failed to issue command.\n\r");
// Wait for command to terminate
while (AT45_IsBusy(pAt45))
AT45D_Wait(pAt45);
return status;
}
/**
* \brief Erases a page of data at the given address in the At45.
*
* \param pAt45 Pointer to an AT45 driver instance.
* \param dwAddress Address of page to erase.
*/
extern void AT45D_Erase( At45* pAt45, uint32_t dwAddress )
{
uint32_t dwError ;
assert( pAt45 != NULL ) ;
/* Issue a page erase command. */
dwError = AT45_SendCommand( pAt45, AT45_PAGE_ERASE, 4, 0, 0, dwAddress, 0, 0 ) ;
assert( !dwError ) ;
/* Wait for end of transfer. */
while ( AT45_IsBusy(pAt45 ) )
{
AT45D_Wait( pAt45 ) ;
}
/* Poll until the At45 has completed the erase operation. */
AT45D_WaitReady( pAt45 ) ;
}
/**
* \brief Retrieves and returns the At45 current status, or 0 if an error happened.
*
* \param pAt45 Pointer to an AT45 driver instance.
*/
extern uint32_t AT45D_GetStatus( At45* pAt45 )
{
uint32_t dwError ;
uint8_t ucStatus ;
assert( pAt45 != NULL ) ;
/* Issue a status register read command */
dwError = AT45_SendCommand( pAt45, AT45_STATUS_READ, 1, &ucStatus, 1, 0, 0, 0 ) ;
assert( !dwError ) ;
/* Wait for command to terminate */
while ( AT45_IsBusy( pAt45 ) )
{
AT45D_Wait( pAt45 ) ;
}
return ucStatus ;
}
/**
* \brief Erases a page of data at the given address in the At45.
*
* \param pAt45 Pointer to an AT45 driver instance.
* \param address Address of page to erase.
*/
void AT45D_Erase(At45 *pAt45, uint32_t address)
{
uint8_t error;
SANITY_CHECK(pAt45);
/* Issue a page erase command. */
error = AT45_SendCommand(pAt45, AT45_PAGE_ERASE, 4, 0, 0, address, 0, 0);
ASSERT(!error, "-F- AT45_Erase: Could not issue command.\n\r");
/* Wait for end of transfer. */
while (AT45_IsBusy(pAt45)) {
AT45D_Wait(pAt45);
}
/* Poll until the At45 has completed the erase operation.*/
AT45D_WaitReady(pAt45);
}
/**
* \brief Configure power-of-2 binary page size in the At45.
*
* \param pAt45 Pointer to an AT45 driver instance.
*/
extern void AT45D_BinaryPage( At45* pAt45 )
{
uint8_t dwError ;
uint8_t opcode[3]= {AT45_BINARY_PAGE};
assert( pAt45 != NULL ) ;
/* Issue a binary page command. */
dwError = AT45_SendCommand( pAt45, AT45_BINARY_PAGE_FIRST_OPCODE, 1, opcode, 3, 0, 0, 0 ) ;
assert( !dwError ) ;
/* Wait for end of transfer.*/
while ( AT45_IsBusy( pAt45 ) )
{
AT45D_Wait( pAt45 ) ;
}
/* Wait until the At45 becomes ready again.*/
AT45D_WaitReady( pAt45 ) ;
}
/**
* \brief Writes data on the At45 at the specified address. Only one page of
* data is written that way; if the address is not at the beginning of the
* page, the data is written starting from this address and wraps around to
* the beginning of the page.
*
* \param pAt45 Pointer to an AT45 driver instance.
* \param pucBuffer Data buffer.
* \param dwSize Number of bytes to write.
* \param dwAddress Destination address on the At45.
*/
extern void AT45D_Write( At45* pAt45, uint8_t *pucBuffer, uint32_t dwSize, uint32_t dwAddress )
{
uint8_t dwError ;
assert( pAt45 != NULL ) ;
assert( pucBuffer != NULL ) ;
assert( dwSize <= pAt45->pDesc->pageSize ) ;
/* Issue a page write through buffer 1 command. */
dwError = AT45_SendCommand( pAt45, AT45_PAGE_WRITE_BUF1, 4, pucBuffer, dwSize, dwAddress, 0, 0 ) ;
assert( !dwError ) ;
/* Wait until the command is sent. */
while ( AT45_IsBusy( pAt45 ) )
{
AT45D_Wait( pAt45 ) ;
}
/* Wait until the At45 becomes ready again.*/
AT45D_WaitReady( pAt45 ) ;
}
void AT45D_BinaryPage(At45 *pAt45)
{
unsigned char error;
unsigned char opcode[3] = {AT45_BINARY_PAGE};
SANITY_CHECK(pAt45);
// Issue a binary page command.
error = AT45_SendCommand(
pAt45, AT45_BINARY_PAGE_FIRST_OPCODE, 1, opcode, 3, 0, 0, 0);
ASSERT(!error, "-F- AT45_Erase: Could not issue command.\n\r");
// Wait for end of transfer
while (AT45_IsBusy(pAt45))
AT45D_Wait(pAt45);
// Wait until the At45 becomes ready again
AT45D_WaitReady(pAt45);
}
//------------------------------------------------------------------------------
/// Reads data from the At45 inside the provided buffer. Since a continuous
/// read command is used, there is no restriction on the buffer size and read
/// address.
/// \param pAt45 Pointer to a At45 driver instance.
/// \param pBuffer Data buffer.
/// \param size Number of bytes to read.
/// \param address Address at which data shall be read.
//------------------------------------------------------------------------------
void AT45D_Read(
At45 *pAt45,
unsigned char *pBuffer,
unsigned int size,
unsigned int address)
{
unsigned char error;
SANITY_CHECK(pAt45);
SANITY_CHECK(pBuffer);
// Issue a continuous read array command
error = AT45_SendCommand(
pAt45, AT45_CONTINUOUS_READ_LEG, 8, pBuffer, size, address, 0, 0);
ASSERT(!error, "-F- AT45_Read: Failed to issue command\n\r");
// Wait for the read command to execute
while (AT45_IsBusy(pAt45))
AT45D_Wait(pAt45);
}
/**
* \brief Configure power-of-2 binary page size in the At45.
*
* \param pAt45 Pointer to an AT45 driver instance.
*/
void AT45D_BinaryPage(At45 *pAt45)
{
uint8_t error;
uint8_t opcode[3]= {AT45_BINARY_PAGE};
SANITY_CHECK(pAt45);
/* Issue a binary page command. */
error = AT45_SendCommand(pAt45, AT45_BINARY_PAGE_FIRST_OPCODE, 1, opcode, 3, 0, 0, 0);
ASSERT(!error, "-F- AT45_Erase: Could not issue command.\n\r");
/* Wait for end of transfer.*/
while (AT45_IsBusy(pAt45)) {
AT45D_Wait(pAt45);
}
/* Wait until the At45 becomes ready again.*/
AT45D_WaitReady(pAt45);
}
/**
* \brief Reads data from the At45 inside the provided buffer. Since a continuous
* read command is used, there is no restriction on the buffer size and read address.
*
* \param pAt45 Pointer to an AT45 driver instance.
* \param pBuffer Data buffer.
* \param size Number of bytes to read.
* \param address Address at which data shall be read.
*/
void AT45D_Read(
At45 *pAt45,
uint8_t *pBuffer,
uint32_t size,
uint32_t address)
{
uint8_t error;
SANITY_CHECK(pAt45);
SANITY_CHECK(pBuffer);
/* Issue a continuous read array command.*/
error = AT45_SendCommand(pAt45, AT45_CONTINUOUS_READ_LEG, 8, pBuffer, size, address, 0, 0);
ASSERT(!error, "-F- AT45_Read: Failed to issue command\n\r");
/* Wait for the read command to execute.*/
while (AT45_IsBusy(pAt45)) {
AT45D_Wait(pAt45);
}
}
//------------------------------------------------------------------------------
/// Writes data on the At45 at the specified address. Only one page of
/// data is written that way; if the address is not at the beginning of the
/// page, the data is written starting from this address and wraps around to
/// the beginning of the page.
/// \param pAt45 Pointer to a At45 driver instance.
/// \param pBuffer Buffer containing the data to write.
/// \param size Number of bytes to write.
/// \param address Destination address on the At45.
//------------------------------------------------------------------------------
void AT45D_Write(
At45 *pAt45,
unsigned char *pBuffer,
unsigned int size,
unsigned int address)
{
unsigned char error;
SANITY_CHECK(pAt45);
SANITY_CHECK(pBuffer);
SANITY_CHECK(size <= pAt45->pDesc->pageSize);
// Issue a page write through buffer 1 command
error = AT45_SendCommand(
pAt45, AT45_PAGE_WRITE_BUF1, 4, pBuffer, size, address, 0, 0);
ASSERT(!error, "-F- AT45_Write: Could not issue command.\n\r");
// Wait until the command is sent
while (AT45_IsBusy(pAt45))
AT45D_Wait(pAt45);
// Wait until the At45 becomes ready again
AT45D_WaitReady(pAt45);
}
