コード例 #1
0
/**
  * @brief Stops audio Codec playing. It powers down the codec.
  * @param DeviceAddr: Device address on communication Bus. 
  * @param CodecPdwnMode: selects the  power down mode.
  *          - CODEC_PDWN_HW: Physically power down the codec. When resuming from this
  *                           mode, the codec is set to default configuration 
  *                           (user should re-Initialize the codec in order to 
  *                            play again the audio stream).
  * @retval 0 if correct communication, else wrong communication
  */
uint32_t cs42l52_Stop(uint16_t DeviceAddr, uint32_t CodecPdwnMode)
{
  uint32_t counter = 0;
  
  /* Mute the output first */
  counter += cs42l52_SetMute(DeviceAddr, AUDIO_MUTE_ON);
  
  AUDIO_IO_Delay(20);

  /* Power down the DAC and the speaker (PMDAC and PMSPK bits)*/
  counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x9F);
  
  Is_cs42l52_Stop = 1;
  return counter;    
}
コード例 #2
0
/**
  * @brief Pauses playing on the audio codec.
  * @param DeviceAddr: Device address on communication Bus. 
  * @retval 0 if correct communication, else wrong communication
  */
uint32_t cs42l52_Pause(uint16_t DeviceAddr)
{  
  uint32_t counter = 0;

  /* Pause the audio file playing */
  /* Mute the output first */
  counter += cs42l52_SetMute(DeviceAddr, AUDIO_MUTE_ON);

  AUDIO_IO_Delay(20);
  
  /* Put the Codec in Power save mode */    
  counter += CODEC_IO_Write(DeviceAddr,0x02, 0x01);
  
  return counter;
}
コード例 #3
0
/**
  * @brief Resumes playing on the audio codec.
  * @param DeviceAddr: Device address on communication Bus. 
  * @retval 0 if correct communication, else wrong communication
  */
uint32_t cs42l52_Resume(uint16_t DeviceAddr)
{
  uint32_t counter = 0;
  /* Resumes the audio file playing */  
  /* Unmute the output first */
  counter += cs42l52_SetMute(DeviceAddr, AUDIO_MUTE_OFF);

  AUDIO_IO_Delay(20);
  
  counter += CODEC_IO_Write(DeviceAddr,0x04, OutputDev);

  /* Exit the Power save mode */
  counter += CODEC_IO_Write(DeviceAddr,0x02, 0x9E); 
  
  return counter;
}
コード例 #4
0
ファイル: wm8994.c プロジェクト: 451506709/automated_machine
/**
  * @brief Initializes the audio codec and the control interface.
  * @param DeviceAddr: Device address on communication Bus.   
  * @param OutputDevice: can be OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
  *                       OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO .
  * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
  * @param AudioFreq: Audio Frequency 
  * @retval 0 if correct communication, else wrong communication
  */
uint32_t wm8994_Init(uint16_t DeviceAddr, uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
{
  uint32_t counter = 0;
  
  /* Initialize the Control interface of the Audio Codec */
  AUDIO_IO_Init();
  
  /* wm8994 Errata Work-Arounds */
  counter += CODEC_IO_Write(DeviceAddr, 0x102, 0x0003);
  counter += CODEC_IO_Write(DeviceAddr, 0x817, 0x0000);
  counter += CODEC_IO_Write(DeviceAddr, 0x102, 0x0000);
  
  /* Enable VMID soft start (fast), Start-up Bias Current Enabled */
  counter += CODEC_IO_Write(DeviceAddr, 0x39, 0x0064);
  
  /* Enable bias generator, Enable VMID */
  counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x0003);
  
  /* Add Delay */
  AUDIO_IO_Delay(50);
  
  /* Path Configurations */
  switch (OutputDevice)
  {
  case OUTPUT_DEVICE_SPEAKER:
    /* Enable DAC1 (Left), Enable DAC1 (Right), 
    Disable DAC2 (Left), Disable DAC2 (Right)*/
    counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0C0C);
    
    /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0000);
    
    /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0000);
    
    /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
    
    /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
    break;
    
  case OUTPUT_DEVICE_HEADPHONE:
    /* Disable DAC1 (Left), Disable DAC1 (Right), 
    Enable DAC2 (Left), Enable DAC2 (Right)*/
    counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
    
    /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
    
    /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
    
    /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
    
    /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
    break;
    
  case OUTPUT_DEVICE_BOTH:
    /* Enable DAC1 (Left), Enable DAC1 (Right), 
    also Enable DAC2 (Left), Enable DAC2 (Right)*/
    counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303 | 0x0C0C);
    
    /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
    
    /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
    
    /* Enable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
    
    /* Enable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
    break;
    
  default:
    /* Disable DAC1 (Left), Disable DAC1 (Right), 
    Enable DAC2 (Left), Enable DAC2 (Right)*/
    counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
    
    /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
    
    /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
    
    /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
    
    /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
    counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
    break;    
  }
  
  /*  Clock Configurations */
  switch (AudioFreq)
  {
  case  AUDIO_FREQUENCY_8K:
    /* AIF1 Sample Rate = 8 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0003);
    break;
    
  case  AUDIO_FREQUENCY_16K:
    /* AIF1 Sample Rate = 16 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0033);
    break;
    
  case  AUDIO_FREQUENCY_48K:
    /* AIF1 Sample Rate = 48 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
    break;
    
  case  AUDIO_FREQUENCY_96K:
    /* AIF1 Sample Rate = 96 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x00A3);
    break;
    
  case  AUDIO_FREQUENCY_11K:
    /* AIF1 Sample Rate = 11.025 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0013);
    break;
    
  case  AUDIO_FREQUENCY_22K:
    /* AIF1 Sample Rate = 22.050 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0043);
    break;
    
  case  AUDIO_FREQUENCY_44K:
    /* AIF1 Sample Rate = 44.1 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0073);
    break; 
    
  default:
    /* AIF1 Sample Rate = 48 (KHz), ratio=256 */ 
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
    break; 
  }
  
  /* AIF1 Word Length = 16-bits, AIF1 Format = I2S (Default Register Value) */
  counter += CODEC_IO_Write(DeviceAddr, 0x300, 0x4010);
  
  /* slave mode */
  counter += CODEC_IO_Write(DeviceAddr, 0x302, 0x0000);
  
  /* Enable the DSP processing clock for AIF1, Enable the core clock */
  counter += CODEC_IO_Write(DeviceAddr, 0x208, 0x000A);
  
  /* Enable AIF1 Clock, AIF1 Clock Source = MCLK1 pin */
  counter += CODEC_IO_Write(DeviceAddr, 0x200, 0x0001);
  
  /* Analogue Output Configuration */
  
  /* Enable SPKRVOL PGA, Enable SPKMIXR, Enable SPKLVOL PGA, Enable SPKMIXL */
  counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0300);
  
  /* Left Speaker Mixer Volume = 0dB */
  counter += CODEC_IO_Write(DeviceAddr, 0x22, 0x0000);
  
  /* Speaker output mode = Class D, Right Speaker Mixer Volume = 0dB ((0x23, 0x0100) = class AB)*/
  counter += CODEC_IO_Write(DeviceAddr, 0x23, 0x0000);
  
  /* Volume Control */
  wm8994_SetVolume(DeviceAddr, Volume);
  
  /* Unmute DAC2 (Left) to Left Speaker Mixer (SPKMIXL) path, 
  Unmute DAC2 (Right) to Right Speaker Mixer (SPKMIXR) path */
  counter += CODEC_IO_Write(DeviceAddr, 0x36, 0x0300);
  
  /* Enable bias generator, Enable VMID, Enable SPKOUTL, Enable SPKOUTR */
  counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x3003);
  
  /* Headphone/Speaker Enable */
  
  /* Enable Class W, Class W Envelope Tracking = AIF1 Timeslot 0 */
  counter += CODEC_IO_Write(DeviceAddr, 0x51, 0x0005);
  
  /* Enable bias generator, Enable VMID, Enable HPOUT1 (Left) and Enable HPOUT1 (Right) input stages */
  /* idem for Speaker */
  counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x0303 | 0x3003);
  
  /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate stages */
  counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x0022);
  
  /* Enable Charge Pump */
  counter += CODEC_IO_Write(DeviceAddr, 0x4C, 0x9F25);
  
  /* Add Delay */
  AUDIO_IO_Delay(15);
  
  /* Select DAC1 (Left) to Left Headphone Output PGA (HPOUT1LVOL) path */
  counter += CODEC_IO_Write(DeviceAddr, 0x2D, 0x0001);
  
  /* Select DAC1 (Right) to Right Headphone Output PGA (HPOUT1RVOL) path */
  counter += CODEC_IO_Write(DeviceAddr, 0x2E, 0x0001);
  
  /* Enable Left Output Mixer (MIXOUTL), Enable Right Output Mixer (MIXOUTR) */
  /* idem for SPKOUTL and SPKOUTR */
  counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0030 | 0x0300);
  
  /* Enable DC Servo and trigger start-up mode on left and right channels */
  counter += CODEC_IO_Write(DeviceAddr, 0x54, 0x0033);
  
  /* Add Delay */
  AUDIO_IO_Delay(250);
  
  /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate and output stages. Remove clamps */
  counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x00EE);
  
  /* Unmutes */
  
  /* Unmute DAC 1 (Left) */
  counter += CODEC_IO_Write(DeviceAddr, 0x610, 0x00C0);
  
  /* Unmute DAC 1 (Right) */
  counter += CODEC_IO_Write(DeviceAddr, 0x611, 0x00C0);
  
  /* Unmute the AIF1 Timeslot 0 DAC path */
  counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0000);
  
  /* Unmute DAC 2 (Left) */
  counter += CODEC_IO_Write(DeviceAddr, 0x612, 0x00C0);
  
  /* Unmute DAC 2 (Right) */
  counter += CODEC_IO_Write(DeviceAddr, 0x613, 0x00C0);
  
  /* Unmute the AIF1 Timeslot 1 DAC2 path */
  counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0000);
  
  /* Return communication control value */
  return counter;  
}
コード例 #5
0
ファイル: wm8994.c プロジェクト: colinporth/radioPlus
/**
  * @brief Initializes the audio codec and the control interface.
  * @param DeviceAddr: Device address on communication Bus.
  * @param OutputInputDevice: can be OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
  *  OUTPUT_DEVICE_BOTH, OUTPUT_DEVICE_AUTO, INPUT_DEVICE_DIGITAL_MICROPHONE_1,
  *  INPUT_DEVICE_DIGITAL_MICROPHONE_2, INPUT_DEVICE_INPUT_LINE_1 or INPUT_DEVICE_INPUT_LINE_2.
  * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
  * @param AudioFreq: Audio Frequency
  * @retval 0 if correct communication, else wrong communication
  */
uint32_t wm8994_Init (uint16_t DeviceAddr, uint16_t OutputInputDevice, uint8_t Volume, uint32_t AudioFreq)
{
  uint32_t counter = 0;
  uint16_t output_device = OutputInputDevice & 0xFF;
  uint16_t input_device = OutputInputDevice & 0xFF00;
  uint16_t power_mgnt_reg_1 = 0;

  /* Initialize the Control interface of the Audio Codec */
  AUDIO_IO_Init();

  /* wm8994 Errata Work-Arounds */
  counter += CODEC_IO_Write (DeviceAddr, 0x102, 0x0003);
  counter += CODEC_IO_Write (DeviceAddr, 0x817, 0x0000);
  counter += CODEC_IO_Write (DeviceAddr, 0x102, 0x0000);

  /* Enable VMID soft start (fast), Start-up Bias Current Enabled */
  counter += CODEC_IO_Write (DeviceAddr, 0x39, 0x006C);

  /* Enable bias generator, Enable VMID */
  counter += CODEC_IO_Write (DeviceAddr, 0x01, 0x0003);

  /* Add Delay */
  AUDIO_IO_Delay(50);

  /* Path Configurations for output */
  if (output_device > 0)
  {
    outputEnabled = 1;
    switch (output_device)
    {
    case OUTPUT_DEVICE_SPEAKER:
      /* Enable DAC1 (Left), Enable DAC1 (Right),
      Disable DAC2 (Left), Disable DAC2 (Right)*/
      counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0C0C);

      /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0000);

      /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0000);

      /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);

      /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
      break;

    case OUTPUT_DEVICE_HEADPHONE:
      /* Disable DAC1 (Left), Disable DAC1 (Right),
      Enable DAC2 (Left), Enable DAC2 (Right)*/
      counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);

      /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);

      /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);

      /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);

      /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
      break;

    case OUTPUT_DEVICE_BOTH:
      /* Enable DAC1 (Left), Enable DAC1 (Right),
      also Enable DAC2 (Left), Enable DAC2 (Right)*/
      counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303 | 0x0C0C);

      /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);

      /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);

      /* Enable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);

      /* Enable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
      break;

    case OUTPUT_DEVICE_AUTO :
    default:
      /* Disable DAC1 (Left), Disable DAC1 (Right),
      Enable DAC2 (Left), Enable DAC2 (Right)*/
      counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);

      /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);

      /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);

      /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);

      /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
      break;
    }
  }
  else
  {
    outputEnabled = 0;
  }

  /* Path Configurations for input */
  if (input_device > 0)
  {
    inputEnabled = 1;
    switch (input_device)
    {
    case INPUT_DEVICE_DIGITAL_MICROPHONE_2 :
      /* Enable AIF1ADC2 (Left), Enable AIF1ADC2 (Right)
       * Enable DMICDAT2 (Left), Enable DMICDAT2 (Right)
       * Enable Left ADC, Enable Right ADC */
      counter += CODEC_IO_Write(DeviceAddr, 0x04, 0x0C30);

      /* Enable AIF1 DRC2 Signal Detect & DRC in AIF1ADC2 Left/Right Timeslot 1 */
      counter += CODEC_IO_Write(DeviceAddr, 0x450, 0x00DB);

      /* Disable IN1L, IN1R, IN2L, IN2R, Enable Thermal sensor & shutdown */
      counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x6000);

      /* Enable the DMIC2(Left) to AIF1 Timeslot 1 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x608, 0x0002);

      /* Enable the DMIC2(Right) to AIF1 Timeslot 1 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x609, 0x0002);

      /* GPIO1 pin configuration GP1_DIR = output, GP1_FN = AIF1 DRC2 signal detect */
      counter += CODEC_IO_Write(DeviceAddr, 0x700, 0x000E);
      break;

    case INPUT_DEVICE_INPUT_LINE_1 :
      /* Enable AIF1ADC1 (Left), Enable AIF1ADC1 (Right)
       * Enable Left ADC, Enable Right ADC */
      counter += CODEC_IO_Write(DeviceAddr, 0x04, 0x0303);

      /* Enable AIF1 DRC1 Signal Detect & DRC in AIF1ADC1 Left/Right Timeslot 0 */
      counter += CODEC_IO_Write(DeviceAddr, 0x440, 0x00DB);

      /* Enable IN1L and IN1R, Disable IN2L and IN2R, Enable Thermal sensor & shutdown */
      counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x6350);

      /* Enable the ADCL(Left) to AIF1 Timeslot 0 (Left) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x606, 0x0002);

      /* Enable the ADCR(Right) to AIF1 Timeslot 0 (Right) mixer path */
      counter += CODEC_IO_Write(DeviceAddr, 0x607, 0x0002);

      /* GPIO1 pin configuration GP1_DIR = output, GP1_FN = AIF1 DRC1 signal detect */
      counter += CODEC_IO_Write(DeviceAddr, 0x700, 0x000D);
      break;

    case INPUT_DEVICE_DIGITAL_MICROPHONE_1 :
    case INPUT_DEVICE_INPUT_LINE_2 :
    default:
      /* Actually, no other input devices supported */
      counter++;
      break;
    }
  }
  else
  {
    inputEnabled = 0;
  }

  /*  Clock Configurations */
  switch (AudioFreq)
  {
  case  AUDIO_FREQUENCY_8K:
    /* AIF1 Sample Rate = 8 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0003);
    break;

  case  AUDIO_FREQUENCY_16K:
    /* AIF1 Sample Rate = 16 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0033);
    break;

  case  AUDIO_FREQUENCY_48K:
    /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
    break;

  case  AUDIO_FREQUENCY_96K:
    /* AIF1 Sample Rate = 96 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x00A3);
    break;

  case  AUDIO_FREQUENCY_11K:
    /* AIF1 Sample Rate = 11.025 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0013);
    break;

  case  AUDIO_FREQUENCY_22K:
    /* AIF1 Sample Rate = 22.050 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0043);
    break;

  case  AUDIO_FREQUENCY_44K:
    /* AIF1 Sample Rate = 44.1 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0073);
    break;

  default:
    /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
    counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
    break;
  }
  /* AIF1 Word Length = 16-bits, AIF1 Format = I2S (Default Register Value) */
  counter += CODEC_IO_Write(DeviceAddr, 0x300, 0x4010);

  /* slave mode */
  counter += CODEC_IO_Write(DeviceAddr, 0x302, 0x0000);

  /* Enable the DSP processing clock for AIF1, Enable the core clock */
  counter += CODEC_IO_Write(DeviceAddr, 0x208, 0x000A);

  /* Enable AIF1 Clock, AIF1 Clock Source = MCLK1 pin */
  counter += CODEC_IO_Write(DeviceAddr, 0x200, 0x0001);

  if (output_device > 0)  /* Audio output selected */
  {
    /* Analog Output Configuration */

    /* Enable SPKRVOL PGA, Enable SPKMIXR, Enable SPKLVOL PGA, Enable SPKMIXL */
    counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0300);

    /* Left Speaker Mixer Volume = 0dB */
    counter += CODEC_IO_Write(DeviceAddr, 0x22, 0x0000);

    /* Speaker output mode = Class D, Right Speaker Mixer Volume = 0dB ((0x23, 0x0100) = class AB)*/
    counter += CODEC_IO_Write(DeviceAddr, 0x23, 0x0000);

    /* Unmute DAC2 (Left) to Left Speaker Mixer (SPKMIXL) path,
    Unmute DAC2 (Right) to Right Speaker Mixer (SPKMIXR) path */
    counter += CODEC_IO_Write(DeviceAddr, 0x36, 0x0300);

    /* Enable bias generator, Enable VMID, Enable SPKOUTL, Enable SPKOUTR */
    counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x3003);

    /* Headphone/Speaker Enable */

    /* Enable Class W, Class W Envelope Tracking = AIF1 Timeslot 0 */
    counter += CODEC_IO_Write(DeviceAddr, 0x51, 0x0005);

    /* Enable bias generator, Enable VMID, Enable HPOUT1 (Left) and Enable HPOUT1 (Right) input stages */
    /* idem for Speaker */
    power_mgnt_reg_1 |= 0x0303 | 0x3003;
    counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);

    /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate stages */
    counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x0022);

    /* Enable Charge Pump */
    counter += CODEC_IO_Write(DeviceAddr, 0x4C, 0x9F25);

    /* Add Delay */
    AUDIO_IO_Delay(15);

    /* Select DAC1 (Left) to Left Headphone Output PGA (HPOUT1LVOL) path */
    counter += CODEC_IO_Write(DeviceAddr, 0x2D, 0x0001);

    /* Select DAC1 (Right) to Right Headphone Output PGA (HPOUT1RVOL) path */
    counter += CODEC_IO_Write(DeviceAddr, 0x2E, 0x0001);

    /* Enable Left Output Mixer (MIXOUTL), Enable Right Output Mixer (MIXOUTR) */
    /* idem for SPKOUTL and SPKOUTR */
    counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0030 | 0x0300);

    /* Enable DC Servo and trigger start-up mode on left and right channels */
    counter += CODEC_IO_Write(DeviceAddr, 0x54, 0x0033);

    /* Add Delay */
    AUDIO_IO_Delay(250);

    /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate and output stages. Remove clamps */
    counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x00EE);

    /* Unmutes */

    /* Unmute DAC 1 (Left) */
    counter += CODEC_IO_Write(DeviceAddr, 0x610, 0x00C0);

    /* Unmute DAC 1 (Right) */
    counter += CODEC_IO_Write(DeviceAddr, 0x611, 0x00C0);

    /* Unmute the AIF1 Timeslot 0 DAC path */
    counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0000);

    /* Unmute DAC 2 (Left) */
    counter += CODEC_IO_Write(DeviceAddr, 0x612, 0x00C0);

    /* Unmute DAC 2 (Right) */
    counter += CODEC_IO_Write(DeviceAddr, 0x613, 0x00C0);

    /* Unmute the AIF1 Timeslot 1 DAC2 path */
    counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0000);

    /* Volume Control */
    wm8994_SetVolume(DeviceAddr, Volume);
  }

  if (input_device > 0) /* Audio input selected */
  {
    if ((input_device == INPUT_DEVICE_DIGITAL_MICROPHONE_1) || (input_device == INPUT_DEVICE_DIGITAL_MICROPHONE_2))
    {
      /* Enable Microphone bias 1 generator, Enable VMID */
      power_mgnt_reg_1 |= 0x0013;
      counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);

      /* ADC oversample enable */
      counter += CODEC_IO_Write(DeviceAddr, 0x620, 0x0002);

      /* AIF ADC2 HPF enable, HPF cut = voice mode 1 fc=127Hz at fs=8kHz */
      counter += CODEC_IO_Write(DeviceAddr, 0x411, 0x3800);
    }
    else if ((input_device == INPUT_DEVICE_INPUT_LINE_1) || (input_device == INPUT_DEVICE_INPUT_LINE_2))
    {
      /* Enable normal bias generator, Enable VMID */
      power_mgnt_reg_1 |= 0x0003;
      counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);

      /* Disable mute on IN1L, IN1L Volume = +0dB */
      counter += CODEC_IO_Write(DeviceAddr, 0x18, 0x000B);

      /* Disable mute on IN1R, IN1R Volume = +0dB */
      counter += CODEC_IO_Write(DeviceAddr, 0x1A, 0x000B);

      /* Disable mute on IN1L_TO_MIXINL, Gain = +0dB */
      counter += CODEC_IO_Write(DeviceAddr, 0x29, 0x0025);

      /* Disable mute on IN1R_TO_MIXINL, Gain = +0dB */
      counter += CODEC_IO_Write(DeviceAddr, 0x2A, 0x0025);

      /* IN1LN_TO_IN1L, IN1LP_TO_VMID, IN1RN_TO_IN1R, IN1RP_TO_VMID */
      counter += CODEC_IO_Write(DeviceAddr, 0x28, 0x0011);

      /* AIF ADC1 HPF enable, HPF cut = hifi mode fc=4Hz at fs=48kHz */
      counter += CODEC_IO_Write(DeviceAddr, 0x410, 0x1800);
    }
    /* Volume Control */
    wm8994_SetVolume(DeviceAddr, Volume);
  }
  /* Return communication control value */
  return counter;
}