/**
This function prepare TXT environment.
@param AcmBase ACM base
@param AcmSize ACM size
**/
VOID
TxtPrepareEnvironment (
IN UINT32 AcmBase,
IN UINT32 AcmSize
)
{
MLE_PRIVATE_DATA *MlePrivateData;
DEBUG((EFI_D_INFO, "(TXT) TxtPrepareEnvironment ...\n"));
MlePrivateData = GetMlePrivateData ();
DEBUG((EFI_D_INFO, "(TXT) TxtSaveMtrr ...\n"));
TxtSaveMtrr (MlePrivateData);
DEBUG((EFI_D_INFO, "(TXT) TxtSaveMtrr Done\n"));
MlePrivateData->Cr0 = AsmReadCr0 ();
MlePrivateData->Cr4 = AsmReadCr4 ();
MlePrivateData->Cr3 = (UINT32)AsmReadCr3 ();
DEBUG((EFI_D_INFO, "(TXT) TxtConfigMtrr ...\n"));
TxtConfigMtrr (
AcmBase,
AcmSize,
MEMORY_TYPE_WB
);
DEBUG((EFI_D_INFO, "(TXT) TxtConfigMtrr Done\n"));
DEBUG((EFI_D_INFO, "(TXT) AsmWriteCr0 ...\n"));
AsmWriteCr0(AsmReadCr0 () | CR0_NE);
DEBUG((EFI_D_INFO, "(TXT) AsmWriteCr0 Done\n"));
DEBUG((EFI_D_INFO, "(TXT) TxtPrepareEnvironment Done\n"));
return ;
}
/**
Restore the volatile registers following INIT IPI.
@param VolatileRegisters Pointer to volatile resisters
@param IsRestoreDr TRUE: Restore DRx if supported
FALSE: Do not restore DRx
**/
VOID
RestoreVolatileRegisters (
IN CPU_VOLATILE_REGISTERS *VolatileRegisters,
IN BOOLEAN IsRestoreDr
)
{
UINT32 RegEdx;
AsmWriteCr0 (VolatileRegisters->Cr0);
AsmWriteCr3 (VolatileRegisters->Cr3);
AsmWriteCr4 (VolatileRegisters->Cr4);
if (IsRestoreDr) {
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx);
if ((RegEdx & BIT2) != 0) {
//
// If processor supports Debugging Extensions feature
// by CPUID.[EAX=01H]:EDX.BIT2
//
AsmWriteDr0 (VolatileRegisters->Dr0);
AsmWriteDr1 (VolatileRegisters->Dr1);
AsmWriteDr2 (VolatileRegisters->Dr2);
AsmWriteDr3 (VolatileRegisters->Dr3);
AsmWriteDr6 (VolatileRegisters->Dr6);
AsmWriteDr7 (VolatileRegisters->Dr7);
}
}
}
/**
This function initialize host context per CPU.
@param Index CPU Index
**/
VOID
InitHostContextPerCpu (
IN UINT32 Index
)
{
//
// VmxOn for this CPU
//
AsmWbinvd ();
AsmWriteCr3 (mHostContextCommon.PageTable);
AsmWriteCr4 (AsmReadCr4 () | CR4_PAE | ((UINTN)AsmReadMsr64 (IA32_VMX_CR4_FIXED0_MSR_INDEX) & (UINTN)AsmReadMsr64 (IA32_VMX_CR4_FIXED1_MSR_INDEX)));
AsmWriteCr0 (AsmReadCr0 () | ((UINTN)AsmReadMsr64 (IA32_VMX_CR0_FIXED0_MSR_INDEX) & (UINTN)AsmReadMsr64 (IA32_VMX_CR0_FIXED1_MSR_INDEX)));
AsmVmxOn (&mHostContextCommon.HostContextPerCpu[Index].Vmcs);
}
/**
Initialize SSE support.
**/
VOID
InitXMM (
VOID
)
{
UINT32 RegEdx;
AsmCpuid (EFI_CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx);
//
//Check whether SSE2 is supported
//
if ((RegEdx & BIT26) == 0) {
AsmWriteCr0 (AsmReadCr0 () | BIT1);
AsmWriteCr4 (AsmReadCr4 () | BIT9 | BIT10);
}
}
/**
This function restore TXT environment.
**/
VOID
TxtRestoreEnvironment (
VOID
)
{
MLE_PRIVATE_DATA *MlePrivateData;
DEBUG((EFI_D_INFO, "(TXT) TxtRestoreEnvironment...\n"));
MlePrivateData = GetMlePrivateData ();
DEBUG((EFI_D_INFO, "(TXT) TxtRestoreMtrr...\n"));
TxtRestoreMtrr (MlePrivateData);
DEBUG((EFI_D_INFO, "(TXT) TxtRestoreMtrr Done\n"));
DEBUG((EFI_D_INFO, "(TXT) AsmWriteCr3...\n"));
AsmWriteCr3 (MlePrivateData->Cr3);
DEBUG((EFI_D_INFO, "(TXT) AsmWriteCr4...\n"));
AsmWriteCr4 (MlePrivateData->Cr4);
DEBUG((EFI_D_INFO, "(TXT) AsmWriteCr0...\n"));
AsmWriteCr0 (MlePrivateData->Cr0);
DEBUG((EFI_D_INFO, "(TXT) TxtRestoreEnvironment Done\n"));
return ;
}
/**
Programs registers for the calling processor.
This function programs registers for the calling processor.
@param RegisterTable Pointer to register table of the running processor.
**/
VOID
SetProcessorRegister (
CPU_REGISTER_TABLE *RegisterTable
)
{
CPU_REGISTER_TABLE_ENTRY *RegisterTableEntry;
UINTN Index;
UINTN Value;
//
// Traverse Register Table of this logical processor
//
RegisterTableEntry = (CPU_REGISTER_TABLE_ENTRY *) (UINTN) RegisterTable->RegisterTableEntry;
for (Index = 0; Index < RegisterTable->TableLength; Index++, RegisterTableEntry++) {
//
// Check the type of specified register
//
switch (RegisterTableEntry->RegisterType) {
//
// The specified register is Control Register
//
case ControlRegister:
switch (RegisterTableEntry->Index) {
case 0:
Value = AsmReadCr0 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr0 (Value);
break;
case 2:
Value = AsmReadCr2 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr2 (Value);
break;
case 3:
Value = AsmReadCr3 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr3 (Value);
break;
case 4:
Value = AsmReadCr4 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr4 (Value);
break;
default:
break;
}
break;
//
// The specified register is Model Specific Register
//
case Msr:
//
// If this function is called to restore register setting after INIT signal,
// there is no need to restore MSRs in register table.
//
if (RegisterTableEntry->ValidBitLength >= 64) {
//
// If length is not less than 64 bits, then directly write without reading
//
AsmWriteMsr64 (
RegisterTableEntry->Index,
RegisterTableEntry->Value
);
} else {
//
// Set the bit section according to bit start and length
//
AsmMsrBitFieldWrite64 (
RegisterTableEntry->Index,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
}
break;
//
// Enable or disable cache
//
case CacheControl:
//
// If value of the entry is 0, then disable cache. Otherwise, enable cache.
//
if (RegisterTableEntry->Value == 0) {
AsmDisableCache ();
} else {
AsmEnableCache ();
}
break;
default:
break;
}
}
}
/**
Calling this function causes the system to enter a power state for capsule
update.
Reset update should not return, if it returns, it means the system does
not support capsule update.
**/
VOID
EFIAPI
EnterS3WithImmediateWake (
VOID
)
{
UINT8 Data8;
UINT16 Data16;
UINT32 Data32;
UINTN Eflags;
UINTN RegCr0;
EFI_TIME EfiTime;
UINT32 SmiEnSave;
Eflags = AsmReadEflags ();
if ( (Eflags & 0x200) ) {
DisableInterrupts ();
}
//
// Write all cache data to memory because processor will lost power
//
AsmWbinvd();
RegCr0 = AsmReadCr0();
AsmWriteCr0 (RegCr0 | 0x060000000);
SmiEnSave = QNCPortRead (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC);
QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, (SmiEnSave & ~SMI_EN));
//
// Pogram RTC alarm for immediate WAKE
//
//
// Disable SMI sources
//
IoWrite16 (PcdGet16 (PcdGpe0blkIoBaseAddress) + R_QNC_GPE0BLK_SMIE, 0);
//
// Disable RTC alarm interrupt
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_B);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_DATA_REGISTER, (Data8 & ~BIT5));
//
// Clear RTC alarm if already set
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_C);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER); // Read clears alarm status
//
// Disable all WAKE events
//
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E, B_QNC_PM1BLK_PM1E_PWAKED);
//
// Clear all WAKE status bits
//
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1S, B_QNC_PM1BLK_PM1S_ALL);
//
// Avoid RTC rollover
//
do {
WaitForRTCUpdate();
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS);
EfiTime.Second = IoRead8 (PCAT_RTC_DATA_REGISTER);
} while (EfiTime.Second > PLATFORM_RTC_ROLLOVER_LIMIT);
//
// Read RTC time
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_HOURS);
EfiTime.Hour = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_MINUTES);
EfiTime.Minute = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS);
EfiTime.Second = IoRead8 (PCAT_RTC_DATA_REGISTER);
//
// Set RTC alarm
//
//
// Add PLATFORM_WAKE_SECONDS_BUFFER to current EfiTime.Second
// The maths is to allow for the fact we are adding to a BCD number and require the answer to be BCD (EfiTime.Second)
//
if ((BCD_BASE - (EfiTime.Second & 0x0F)) <= PLATFORM_WAKE_SECONDS_BUFFER) {
Data8 = (((EfiTime.Second & 0xF0) + 0x10) + (PLATFORM_WAKE_SECONDS_BUFFER - (BCD_BASE - (EfiTime.Second & 0x0F))));
} else {
Data8 = EfiTime.Second + PLATFORM_WAKE_SECONDS_BUFFER;
}
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_HOURS_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, EfiTime.Hour);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_MINUTES_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, EfiTime.Minute);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, Data8);
//
// Enable RTC alarm interrupt
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_B);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_DATA_REGISTER, (Data8 | BIT5));
//
// Enable RTC alarm as WAKE event
//
Data16 = IoRead16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E);
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E, (Data16 | B_QNC_PM1BLK_PM1E_RTC));
//
// Enter S3
//
Data32 = IoRead32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C);
Data32 = (UINT32) ((Data32 & 0xffffc3fe) | V_S3 | B_QNC_PM1BLK_PM1C_SCIEN);
IoWrite32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C, Data32);
Data32 = Data32 | B_QNC_PM1BLK_PM1C_SLPEN;
IoWrite32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C, Data32);
//
// Enable Interrupt if it's enabled before
//
if ( (Eflags & 0x200) ) {
EnableInterrupts ();
}
}
/**
Programs registers for the calling processor.
This function programs registers for the calling processor.
@param PreSmmInit Specify the target register table.
If TRUE, the target is the pre-SMM-init register table.
If FALSE, the target is the post-SMM-init register table.
@param ProcessorNumber Handle number of specified logical processor.
**/
VOID
SetProcessorRegisterEx (
IN BOOLEAN PreSmmInit,
IN UINTN ProcessorNumber
)
{
CPU_REGISTER_TABLE *RegisterTable;
CPU_REGISTER_TABLE_ENTRY *RegisterTableEntry;
UINTN Index;
UINTN Value;
UINTN StartIndex;
UINTN EndIndex;
if (PreSmmInit) {
RegisterTable = &mCpuConfigConextBuffer.PreSmmInitRegisterTable[ProcessorNumber];
} else {
RegisterTable = &mCpuConfigConextBuffer.RegisterTable[ProcessorNumber];
}
//
// If microcode patch has been applied, then the first register table entry
// is for microcode upate, so it is skipped.
//
StartIndex = 0;
if (mSetBeforeCpuOnlyReset) {
EndIndex = StartIndex + RegisterTable->NumberBeforeReset;
} else {
StartIndex += RegisterTable->NumberBeforeReset;
EndIndex = RegisterTable->TableLength;
}
//
// Traverse Register Table of this logical processor
//
for (Index = StartIndex; Index < EndIndex; Index++) {
RegisterTableEntry = &RegisterTable->RegisterTableEntry[Index];
//
// Check the type of specified register
//
switch (RegisterTableEntry->RegisterType) {
//
// The specified register is Control Register
//
case ControlRegister:
switch (RegisterTableEntry->Index) {
case 0:
Value = AsmReadCr0 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
AsmWriteCr0 (Value);
break;
case 2:
Value = AsmReadCr2 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
AsmWriteCr2 (Value);
break;
case 3:
Value = AsmReadCr3 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
AsmWriteCr3 (Value);
break;
case 4:
Value = AsmReadCr4 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
AsmWriteCr4 (Value);
break;
case 8:
//
// Do we need to support CR8?
//
break;
default:
break;
}
break;
//
// The specified register is Model Specific Register
//
case Msr:
//
// If this function is called to restore register setting after INIT signal,
// there is no need to restore MSRs in register table.
//
if (!mRestoreSettingAfterInit) {
if (RegisterTableEntry->ValidBitLength >= 64) {
//
// If length is not less than 64 bits, then directly write without reading
//
AsmWriteMsr64 (
RegisterTableEntry->Index,
RegisterTableEntry->Value
);
} else {
//
// Set the bit section according to bit start and length
//
AsmMsrBitFieldWrite64 (
RegisterTableEntry->Index,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
}
}
break;
//
// Enable or disable cache
//
case CacheControl:
//
// If value of the entry is 0, then disable cache. Otherwise, enable cache.
//
if (RegisterTableEntry->Value == 0) {
AsmDisableCache ();
} else {
AsmEnableCache ();
}
break;
default:
break;
}
}
}
/**
Programs registers for the calling processor.
This function programs registers for the calling processor.
@param RegisterTables Pointer to register table of the running processor.
@param RegisterTableCount Register table count.
**/
VOID
SetProcessorRegister (
IN CPU_REGISTER_TABLE *RegisterTables,
IN UINTN RegisterTableCount
)
{
CPU_REGISTER_TABLE_ENTRY *RegisterTableEntry;
UINTN Index;
UINTN Value;
SPIN_LOCK *MsrSpinLock;
UINT32 InitApicId;
CPU_REGISTER_TABLE *RegisterTable;
InitApicId = GetInitialApicId ();
RegisterTable = NULL;
for (Index = 0; Index < RegisterTableCount; Index++) {
if (RegisterTables[Index].InitialApicId == InitApicId) {
RegisterTable = &RegisterTables[Index];
break;
}
}
ASSERT (RegisterTable != NULL);
//
// Traverse Register Table of this logical processor
//
RegisterTableEntry = (CPU_REGISTER_TABLE_ENTRY *) (UINTN) RegisterTable->RegisterTableEntry;
for (Index = 0; Index < RegisterTable->TableLength; Index++, RegisterTableEntry++) {
//
// Check the type of specified register
//
switch (RegisterTableEntry->RegisterType) {
//
// The specified register is Control Register
//
case ControlRegister:
switch (RegisterTableEntry->Index) {
case 0:
Value = AsmReadCr0 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr0 (Value);
break;
case 2:
Value = AsmReadCr2 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr2 (Value);
break;
case 3:
Value = AsmReadCr3 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr3 (Value);
break;
case 4:
Value = AsmReadCr4 ();
Value = (UINTN) BitFieldWrite64 (
Value,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINTN) RegisterTableEntry->Value
);
AsmWriteCr4 (Value);
break;
default:
break;
}
break;
//
// The specified register is Model Specific Register
//
case Msr:
//
// If this function is called to restore register setting after INIT signal,
// there is no need to restore MSRs in register table.
//
if (RegisterTableEntry->ValidBitLength >= 64) {
//
// If length is not less than 64 bits, then directly write without reading
//
AsmWriteMsr64 (
RegisterTableEntry->Index,
RegisterTableEntry->Value
);
} else {
//
// Get lock to avoid Package/Core scope MSRs programming issue in parallel execution mode
// to make sure MSR read/write operation is atomic.
//
MsrSpinLock = GetMsrSpinLockByIndex (RegisterTableEntry->Index);
AcquireSpinLock (MsrSpinLock);
//
// Set the bit section according to bit start and length
//
AsmMsrBitFieldWrite64 (
RegisterTableEntry->Index,
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
RegisterTableEntry->Value
);
ReleaseSpinLock (MsrSpinLock);
}
break;
//
// MemoryMapped operations
//
case MemoryMapped:
AcquireSpinLock (mMemoryMappedLock);
MmioBitFieldWrite32 (
(UINTN)(RegisterTableEntry->Index | LShiftU64 (RegisterTableEntry->HighIndex, 32)),
RegisterTableEntry->ValidBitStart,
RegisterTableEntry->ValidBitStart + RegisterTableEntry->ValidBitLength - 1,
(UINT32)RegisterTableEntry->Value
);
ReleaseSpinLock (mMemoryMappedLock);
break;
//
// Enable or disable cache
//
case CacheControl:
//
// If value of the entry is 0, then disable cache. Otherwise, enable cache.
//
if (RegisterTableEntry->Value == 0) {
AsmDisableCache ();
} else {
AsmEnableCache ();
}
break;
default:
break;
}
}
}
/**
Transfers control to DxeCore.
This function performs a CPU architecture specific operations to execute
the entry point of DxeCore with the parameters of HobList.
It also installs EFI_END_OF_PEI_PPI to signal the end of PEI phase.
@param DxeCoreEntryPoint The entry point of DxeCore.
@param HobList The start of HobList passed to DxeCore.
**/
VOID
HandOffToDxeCore (
IN EFI_PHYSICAL_ADDRESS DxeCoreEntryPoint,
IN EFI_PEI_HOB_POINTERS HobList
)
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS BaseOfStack;
EFI_PHYSICAL_ADDRESS TopOfStack;
UINTN PageTables;
X64_IDT_GATE_DESCRIPTOR *IdtTable;
UINTN SizeOfTemplate;
VOID *TemplateBase;
EFI_PHYSICAL_ADDRESS VectorAddress;
UINT32 Index;
X64_IDT_TABLE *IdtTableForX64;
EFI_VECTOR_HANDOFF_INFO *VectorInfo;
EFI_PEI_VECTOR_HANDOFF_INFO_PPI *VectorHandoffInfoPpi;
BOOLEAN BuildPageTablesIa32Pae;
if (IsNullDetectionEnabled ()) {
ClearFirst4KPage (HobList.Raw);
}
Status = PeiServicesAllocatePages (EfiBootServicesData, EFI_SIZE_TO_PAGES (STACK_SIZE), &BaseOfStack);
ASSERT_EFI_ERROR (Status);
if (FeaturePcdGet(PcdDxeIplSwitchToLongMode)) {
//
// Compute the top of the stack we were allocated, which is used to load X64 dxe core.
// Pre-allocate a 32 bytes which confroms to x64 calling convention.
//
// The first four parameters to a function are passed in rcx, rdx, r8 and r9.
// Any further parameters are pushed on the stack. Furthermore, space (4 * 8bytes) for the
// register parameters is reserved on the stack, in case the called function
// wants to spill them; this is important if the function is variadic.
//
TopOfStack = BaseOfStack + EFI_SIZE_TO_PAGES (STACK_SIZE) * EFI_PAGE_SIZE - 32;
//
// x64 Calling Conventions requires that the stack must be aligned to 16 bytes
//
TopOfStack = (EFI_PHYSICAL_ADDRESS) (UINTN) ALIGN_POINTER (TopOfStack, 16);
//
// Load the GDT of Go64. Since the GDT of 32-bit Tiano locates in the BS_DATA
// memory, it may be corrupted when copying FV to high-end memory
//
AsmWriteGdtr (&gGdt);
//
// Create page table and save PageMapLevel4 to CR3
//
PageTables = CreateIdentityMappingPageTables (BaseOfStack, STACK_SIZE);
//
// End of PEI phase signal
//
PERF_EVENT_SIGNAL_BEGIN (gEndOfPeiSignalPpi.Guid);
Status = PeiServicesInstallPpi (&gEndOfPeiSignalPpi);
PERF_EVENT_SIGNAL_END (gEndOfPeiSignalPpi.Guid);
ASSERT_EFI_ERROR (Status);
//
// Paging might be already enabled. To avoid conflict configuration,
// disable paging first anyway.
//
AsmWriteCr0 (AsmReadCr0 () & (~BIT31));
AsmWriteCr3 (PageTables);
//
// Update the contents of BSP stack HOB to reflect the real stack info passed to DxeCore.
//
UpdateStackHob (BaseOfStack, STACK_SIZE);
SizeOfTemplate = AsmGetVectorTemplatInfo (&TemplateBase);
Status = PeiServicesAllocatePages (
EfiBootServicesData,
EFI_SIZE_TO_PAGES(sizeof (X64_IDT_TABLE) + SizeOfTemplate * IDT_ENTRY_COUNT),
&VectorAddress
);
ASSERT_EFI_ERROR (Status);
//
// Store EFI_PEI_SERVICES** in the 4 bytes immediately preceding IDT to avoid that
// it may not be gotten correctly after IDT register is re-written.
//
IdtTableForX64 = (X64_IDT_TABLE *) (UINTN) VectorAddress;
IdtTableForX64->PeiService = GetPeiServicesTablePointer ();
VectorAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) (IdtTableForX64 + 1);
IdtTable = IdtTableForX64->IdtTable;
for (Index = 0; Index < IDT_ENTRY_COUNT; Index++) {
IdtTable[Index].Ia32IdtEntry.Bits.GateType = 0x8e;
IdtTable[Index].Ia32IdtEntry.Bits.Reserved_0 = 0;
IdtTable[Index].Ia32IdtEntry.Bits.Selector = SYS_CODE64_SEL;
IdtTable[Index].Ia32IdtEntry.Bits.OffsetLow = (UINT16) VectorAddress;
IdtTable[Index].Ia32IdtEntry.Bits.OffsetHigh = (UINT16) (RShiftU64 (VectorAddress, 16));
IdtTable[Index].Offset32To63 = (UINT32) (RShiftU64 (VectorAddress, 32));
IdtTable[Index].Reserved = 0;
CopyMem ((VOID *) (UINTN) VectorAddress, TemplateBase, SizeOfTemplate);
AsmVectorFixup ((VOID *) (UINTN) VectorAddress, (UINT8) Index);
VectorAddress += SizeOfTemplate;
}
gLidtDescriptor.Base = (UINTN) IdtTable;
//
// Disable interrupt of Debug timer, since new IDT table cannot handle it.
//
SaveAndSetDebugTimerInterrupt (FALSE);
AsmWriteIdtr (&gLidtDescriptor);
DEBUG ((
DEBUG_INFO,
"%a() Stack Base: 0x%lx, Stack Size: 0x%x\n",
__FUNCTION__,
BaseOfStack,
STACK_SIZE
));
//
// Go to Long Mode and transfer control to DxeCore.
// Interrupts will not get turned on until the CPU AP is loaded.
// Call x64 drivers passing in single argument, a pointer to the HOBs.
//
AsmEnablePaging64 (
SYS_CODE64_SEL,
DxeCoreEntryPoint,
(EFI_PHYSICAL_ADDRESS)(UINTN)(HobList.Raw),
0,
TopOfStack
);
} else {
//
// Get Vector Hand-off Info PPI and build Guided HOB
//
Status = PeiServicesLocatePpi (
&gEfiVectorHandoffInfoPpiGuid,
0,
NULL,
(VOID **)&VectorHandoffInfoPpi
);
if (Status == EFI_SUCCESS) {
DEBUG ((EFI_D_INFO, "Vector Hand-off Info PPI is gotten, GUIDed HOB is created!\n"));
VectorInfo = VectorHandoffInfoPpi->Info;
Index = 1;
while (VectorInfo->Attribute != EFI_VECTOR_HANDOFF_LAST_ENTRY) {
VectorInfo ++;
Index ++;
}
BuildGuidDataHob (
&gEfiVectorHandoffInfoPpiGuid,
VectorHandoffInfoPpi->Info,
sizeof (EFI_VECTOR_HANDOFF_INFO) * Index
);
}
//
// Compute the top of the stack we were allocated. Pre-allocate a UINTN
// for safety.
//
TopOfStack = BaseOfStack + EFI_SIZE_TO_PAGES (STACK_SIZE) * EFI_PAGE_SIZE - CPU_STACK_ALIGNMENT;
TopOfStack = (EFI_PHYSICAL_ADDRESS) (UINTN) ALIGN_POINTER (TopOfStack, CPU_STACK_ALIGNMENT);
PageTables = 0;
BuildPageTablesIa32Pae = ToBuildPageTable ();
if (BuildPageTablesIa32Pae) {
PageTables = Create4GPageTablesIa32Pae (BaseOfStack, STACK_SIZE);
if (IsEnableNonExecNeeded ()) {
EnableExecuteDisableBit();
}
}
//
// End of PEI phase signal
//
PERF_EVENT_SIGNAL_BEGIN (gEndOfPeiSignalPpi.Guid);
Status = PeiServicesInstallPpi (&gEndOfPeiSignalPpi);
PERF_EVENT_SIGNAL_END (gEndOfPeiSignalPpi.Guid);
ASSERT_EFI_ERROR (Status);
if (BuildPageTablesIa32Pae) {
//
// Paging might be already enabled. To avoid conflict configuration,
// disable paging first anyway.
//
AsmWriteCr0 (AsmReadCr0 () & (~BIT31));
AsmWriteCr3 (PageTables);
//
// Set Physical Address Extension (bit 5 of CR4).
//
AsmWriteCr4 (AsmReadCr4 () | BIT5);
}
//
// Update the contents of BSP stack HOB to reflect the real stack info passed to DxeCore.
//
UpdateStackHob (BaseOfStack, STACK_SIZE);
DEBUG ((
DEBUG_INFO,
"%a() Stack Base: 0x%lx, Stack Size: 0x%x\n",
__FUNCTION__,
BaseOfStack,
STACK_SIZE
));
//
// Transfer the control to the entry point of DxeCore.
//
if (BuildPageTablesIa32Pae) {
AsmEnablePaging32 (
(SWITCH_STACK_ENTRY_POINT)(UINTN)DxeCoreEntryPoint,
HobList.Raw,
NULL,
(VOID *) (UINTN) TopOfStack
);
} else {
SwitchStack (
(SWITCH_STACK_ENTRY_POINT)(UINTN)DxeCoreEntryPoint,
HobList.Raw,
NULL,
(VOID *) (UINTN) TopOfStack
);
}
}
}
