/**
* \brief Check for interrupt without wait
* \param port a GPPort
* \param data a pointer to an allocated buffer
* \param size the number of bytes that should be read
*
* Reads a specified number of bytes from the inerrupt endpoint
* into the supplied buffer.
* Function waits 50 miliseconds for data on interrupt endpoint.
*
* \return a gphoto2 error code
**/
int
gp_port_check_int_fast (GPPort *port, char *data, int size)
{
int retval;
gp_log (GP_LOG_DATA, __func__, "Reading %i = 0x%x bytes from interrupt endpoint...", size, size);
C_PARAMS (port);
CHECK_INIT (port);
/* Check if we read as many bytes as expected */
CHECK_SUPP (port, "check_int", port->pc->ops->check_int);
retval = port->pc->ops->check_int (port, data, size, FAST_TIMEOUT);
CHECK_RESULT (retval);
#ifdef IGNORE_EMPTY_INTR_READS
/* For Canon cameras, we will make lots of
reads that will return zero length. Don't
bother to log them as errors. */
if (retval != 0 )
#endif
LOG_DATA (data, retval, size, "Read ", "from interrupt endpoint (fast):");
return (retval);
}
/**
* \brief Send a USB interface control message with input data
*
* \param port a GPPort
* \param request control request code
* \param value control value
* \param index control index
* \param bytes pointer to data
* \param size size of the data
*
* Sends a specific USB control command and read associated data.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_msg_interface_read (GPPort *port, int request, int value, int index,
char *bytes, int size)
{
int retval;
gp_log (GP_LOG_DEBUG, "gphoto2-port", "Reading message "
"(request=0x%x value=0x%x index=0x%x size=%i=0x%x)...",
request, value, index, size, size);
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "msg_read", port->pc->ops->msg_interface_read);
retval = port->pc->ops->msg_interface_read (port, request,
value, index, bytes, size);
CHECK_RESULT (retval);
if (retval != size)
gp_log (GP_LOG_DEBUG, "gphoto2-port", "Could only read %i "
"out of %i byte(s)", retval, size);
gp_log_data ("gphoto2-port", bytes, retval);
return (retval);
}
/**
* \brief Check for intterupt.
*
* \param port a GPPort
* \param data a pointer to an allocated buffer
* \param size the number of bytes that should be read
*
* Reads a specified number of bytes from the interrupt endpoint
* into the supplied buffer.
* Function waits port->timeout miliseconds for data on interrupt endpoint.
*
* \return a gphoto2 error code
**/
int
gp_port_check_int (GPPort *port, char *data, int size)
{
int retval;
gp_log (GP_LOG_DEBUG, "gphoto2-port",
ngettext(
"Reading %i=0x%x byte from interrupt endpoint...",
"Reading %i=0x%x bytes from interrupt endpoint...",
size), size, size);
CHECK_NULL (port);
CHECK_INIT (port);
/* Check if we read as many bytes as expected */
CHECK_SUPP (port, "check_int", port->pc->ops->check_int);
retval = port->pc->ops->check_int (port, data, size, port->timeout);
CHECK_RESULT (retval);
if (retval != size)
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Could only read %i "
"out of %i byte(s)"), retval, size);
gp_log_data ("gphoto2-port", data, retval);
return (retval);
}
/**
* \brief Send a SCSI command to a port (for usb scsi ports)
*
* \param port a #GPPort
* \param to_dev data direction, set to 1 for a scsi cmd which sends
* data to the device, set to 0 for cmds which read data from the dev.
* \param cmd buffer holding the command to send
* \param cmd_size sizeof cmd buffer
* \param sense buffer for returning scsi sense information
* \param sense_size sizeof sense buffer
* \param data buffer containing informatino to write to the device
* (to_dev is 1), or to store data read from the device (to_dev 0).
*
* Send a SCSI command to a usb scsi port attached device.
*
* \return a gphoto2 error code
**/
int gp_port_send_scsi_cmd (GPPort *port, int to_dev,
char *cmd, int cmd_size,
char *sense, int sense_size,
char *data, int data_size)
{
int retval;
gp_log (GP_LOG_DEBUG, "gphoto2-port", "Sending scsi cmd:");
gp_log_data ("gphoto2-port", cmd, cmd_size);
if (to_dev && data_size) {
gp_log (GP_LOG_DEBUG, "gphoto2-port", "scsi cmd data:");
gp_log_data ("gphoto2-port", data, data_size);
}
CHECK_NULL (port);
CHECK_INIT (port);
memset (sense, 0, sense_size);
CHECK_SUPP (port, "send_scsi_cmd", port->pc->ops->send_scsi_cmd);
retval = port->pc->ops->send_scsi_cmd (port, to_dev, cmd, cmd_size,
sense, sense_size, data, data_size);
gp_log (GP_LOG_DEBUG, "gphoto2-port", "scsi cmd result: %d", retval);
if (sense[0] != 0) {
gp_log (GP_LOG_DEBUG, "gphoto2-port", "sense data:");
gp_log_data ("gphoto2-port", sense, sense_size);
/* https://secure.wikimedia.org/wikipedia/en/wiki/Key_Code_Qualifier */
gp_log(GP_LOG_DEBUG, "gphoto2-port","sense decided:");
if ((sense[0]&0x7f)!=0x70) {
gp_log(GP_LOG_DEBUG, "gphoto2-port","\tInvalid header.");
}
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tCurrent command read filemark: %s",(sense[2]&0x80)?"yes":"no");
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tEarly warning passed: %s",(sense[2]&0x40)?"yes":"no");
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tIncorrect blocklengt: %s",(sense[2]&0x20)?"yes":"no");
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tSense Key: %d",sense[2]&0xf);
if (sense[0]&0x80)
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tResidual Length: %d",sense[3]*0x1000000+sense[4]*0x10000+sense[5]*0x100+sense[6]);
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tAdditional Sense Length: %d",sense[7]);
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tAdditional Sense Code: %d",sense[12]);
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tAdditional Sense Code Qualifier: %d",sense[13]);
if (sense[15]&0x80) {
gp_log(GP_LOG_DEBUG, "gphoto2-port", "\tIllegal Param is in %s",(sense[15]&0x40)?"the CDB":"the Data Out Phase");
if (sense[15]&0x8) {
gp_log(GP_LOG_DEBUG, "gphoto2-port", "Pointer at %d, bit %d",sense[16]*256+sense[17],sense[15]&0x7);
}
}
}
if (!to_dev && data_size) {
gp_log (GP_LOG_DEBUG, "gphoto2-port", "scsi cmd data:");
gp_log_data ("gphoto2-port", data, data_size);
}
return retval;
}
/**
* \brief Find USB device by vendor/product
*
* \param port a GPPort
* \param idvendor USB vendor id
* \param idproduct USB product id
*
* Find the USB device with the specified vendor:product id pair.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_find_device (GPPort *port, int idvendor, int idproduct)
{
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "find_device", port->pc->ops->find_device);
CHECK_RESULT (port->pc->ops->find_device (port, idvendor, idproduct));
return (GP_OK);
}
/**
* \brief Find USB device by interface class
*
* \param port a GPPort
* \param mainclass the USB interface class
* \param subclass the USB interface subclass
* \param protocol the USB interface protocol
*
* Find the USB device with the specified vendor:product id pair.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_find_device_by_class (GPPort *port, int mainclass, int subclass, int protocol)
{
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "find_device_by_class", port->pc->ops->find_device_by_class);
CHECK_RESULT (port->pc->ops->find_device_by_class (port, mainclass, subclass, protocol));
return (GP_OK);
}
/**
* \brief Flush data on serial port
*
* \param port a GPPort
* \param direction the direction of the flush
*
* Flushes the serial output or input (depending on direction)
* of the serial port.
*
* \return a gphoto2 error code
*/
int
gp_port_flush (GPPort *port, int direction)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Flushing port..."));
CHECK_NULL (port);
CHECK_SUPP (port, "flush", port->pc->ops->flush);
CHECK_RESULT (port->pc->ops->flush (port, direction));
return (GP_OK);
}
/**
* \brief Flush data on serial port
*
* \param port a GPPort
* \param direction the direction of the flush
*
* Flushes the serial output or input (depending on direction)
* of the serial port.
*
* \return a gphoto2 error code
*/
int
gp_port_flush (GPPort *port, int direction)
{
GP_LOG_D ("Flushing port...");
C_PARAMS (port);
CHECK_SUPP (port, "flush", port->pc->ops->flush);
CHECK_RESULT (port->pc->ops->flush (port, direction));
return (GP_OK);
}
/**
* \brief Reset a port.
* \param port a #GPPort
*
* Resets a port. Device will likely reconnect and appear under a new id.
*
* \return a gphoto2 error code
**/
int
gp_port_reset (GPPort *port)
{
GP_LOG_D ("Resetting port...");
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "reset", port->pc->ops->reset);
CHECK_RESULT (port->pc->ops->reset(port));
return (GP_OK);
}
/**
* \brief Close a port.
* \param port a #GPPort
*
* Closes a port temporarily. It can afterwards be reopened using
* #gp_port_open.
*
* \return a gphoto2 error code
**/
int
gp_port_close (GPPort *port)
{
GP_LOG_D ("Closing port...");
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "close", port->pc->ops->close);
CHECK_RESULT (port->pc->ops->close(port));
return (GP_OK);
}
/**
* \brief Reset a port.
* \param port a #GPPort
*
* Resets a port. Device will likely reconnect and appear under a new id.
*
* \return a gphoto2 error code
**/
int
gp_port_reset (GPPort *port)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Resetting port..."));
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "reset", port->pc->ops->reset);
CHECK_RESULT (port->pc->ops->reset(port));
return (GP_OK);
}
/**
* \brief Clear USB endpoint HALT condition
*
* \param port a GPPort
* \param ep endpoint to clear HALT
*
* Clears the HALT (stall?) endpoint condition of the specified endpoint.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_clear_halt (GPPort *port, int ep)
{
GP_LOG_D ("Clear USB halt...");
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "clear_halt", port->pc->ops->clear_halt);
CHECK_RESULT (port->pc->ops->clear_halt (port, ep));
return (GP_OK);
}
/**
* \brief Clear USB endpoint HALT condition
*
* \param port a GPPort
* \param ep endpoint to clear HALT
*
* Clears the HALT (stall?) endpoint condition of the specified endpoint.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_clear_halt (GPPort *port, int ep)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Clear halt..."));
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "clear_halt", port->pc->ops->clear_halt);
CHECK_RESULT (port->pc->ops->clear_halt (port, ep));
return (GP_OK);
}
/**
* \brief Send a break over a serial port
*
* \param port a GPPort
* \param duration duration of break in milliseconds
*
* Sends a break with the specified duration in milliseconds.
*
* \return a gphoto2 error code
*/
int
gp_port_send_break (GPPort *port, int duration)
{
GP_LOG_D ("Sending break (%i milliseconds)...", duration);
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "send_break", port->pc->ops->send_break);
CHECK_RESULT (port->pc->ops->send_break (port, duration));
return (GP_OK);
}
/**
* \brief Close a port.
* \param port a #GPPort
*
* Closes a port temporarily. It can afterwards be reopened using
* #gp_port_open.
*
* \return a gphoto2 error code
**/
int
gp_port_close (GPPort *port)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Closing port..."));
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "close", port->pc->ops->close);
CHECK_RESULT (port->pc->ops->close(port));
return (GP_OK);
}
/**
* \brief Send a break over a serial port
*
* \param port a GPPort
* \param duration duration of break in milliseconds
*
* Sends a break with the specified duration in milliseconds.
*
* \return a gphoto2 error code
*/
int
gp_port_send_break (GPPort *port, int duration)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Sending break (%i "
"milliseconds)..."), duration);
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "send_break", port->pc->ops->send_break);
CHECK_RESULT (port->pc->ops->send_break (port, duration));
return (GP_OK);
}
/**
* \brief Open a port.
* \param port a #GPPort
*
* Opens a port which should have been created with #gp_port_new and
* configured with #gp_port_set_info and #gp_port_set_settings
*
* \return a gphoto2 error code
**/
int
gp_port_open (GPPort *port)
{
C_PARAMS (port);
CHECK_INIT (port);
GP_LOG_D ("Opening %s port...",
port->type == GP_PORT_SERIAL ? "SERIAL" : (port->type == GP_PORT_USB ? "USB" : ""));
CHECK_SUPP (port, "open", port->pc->ops->open);
CHECK_RESULT (port->pc->ops->open (port));
return GP_OK;
}
/**
* \brief Get setting of specific serial PIN
*
* \param port a GPPort
* \param pin the serial pin to be retrieved
* \param level the setting of the pin
*
* \return a gphoto2 error code
*/
int
gp_port_get_pin (GPPort *port, GPPin pin, GPLevel *level)
{
GP_LOG_D ("Getting level of pin %i...", pin);
C_PARAMS (port && level);
CHECK_INIT (port);
CHECK_SUPP (port, "get_pin", port->pc->ops->get_pin);
CHECK_RESULT (port->pc->ops->get_pin (port, pin, level));
GP_LOG_D ("Level of pin %i: %i", pin, *level);
return (GP_OK);
}
/**
* \brief Open a port.
* \param port a #GPPort
*
* Opens a port which should have been created with #gp_port_new and
* configured with #gp_port_set_info and #gp_port_set_settings
*
* \return a gphoto2 error code
**/
int
gp_port_open (GPPort *port)
{
CHECK_NULL (port);
CHECK_INIT (port);
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Opening %s port..."),
port->type == GP_PORT_SERIAL ? "SERIAL" :
(port->type == GP_PORT_USB ? "USB" : ""));
CHECK_SUPP (port, "open", port->pc->ops->open);
CHECK_RESULT (port->pc->ops->open (port));
return GP_OK;
}
/**
* \brief Seek on a port (for usb disk direct ports)
*
* \param port a #GPPort
* \param offset offset to seek to
* \param whence the underlying lseek call whence parameter
*
* Seeks to a specific offset on the usb disk
*
* \return a gphoto2 error code
**/
int
gp_port_seek (GPPort *port, int offset, int whence)
{
int retval;
GP_LOG_D ("Seeking to: %d whence: %d", offset, whence);
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "seek", port->pc->ops->seek);
retval = port->pc->ops->seek (port, offset, whence);
GP_LOG_D ("Seek result: %d", retval);
return retval;
}
/**
* \brief Get setting of specific serial PIN
*
* \param port a GPPort
* \param pin the serial pin to be retrieved
* \param level the setting of the pin
*
* \return a gphoto2 error code
*/
int
gp_port_get_pin (GPPort *port, GPPin pin, GPLevel *level)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Getting level of pin %i..."),
pin);
CHECK_NULL (port && level);
CHECK_INIT (port);
CHECK_SUPP (port, "get_pin", port->pc->ops->get_pin);
CHECK_RESULT (port->pc->ops->get_pin (port, pin, level));
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Level of pin %i: %i"),
pin, *level);
return (GP_OK);
}
/**
* \brief Send a USB control message with output data
*
* \param port a GPPort
* \param request control request code
* \param value control value
* \param index control index
* \param bytes pointer to data
* \param size size of the data
*
* Sends a specific USB control command and write associated data.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_msg_write (GPPort *port, int request, int value, int index,
char *bytes, int size)
{
int retval;
GP_LOG_DATA (bytes, size, "Writing message (request=0x%x value=0x%x index=0x%x size=%i=0x%x):",
request, value, index, size, size);
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "msg_write", port->pc->ops->msg_write);
retval = port->pc->ops->msg_write(port, request, value, index, bytes, size);
CHECK_RESULT (retval);
return (retval);
}
/**
* \brief Check for intterupt.
*
* \param port a GPPort
* \param data a pointer to an allocated buffer
* \param size the number of bytes that should be read
*
* Reads a specified number of bytes from the interrupt endpoint
* into the supplied buffer.
* Function waits port->timeout miliseconds for data on interrupt endpoint.
*
* \return a gphoto2 error code
**/
int
gp_port_check_int (GPPort *port, char *data, int size)
{
int retval;
gp_log (GP_LOG_DATA, __func__, "Reading %i = 0x%x bytes from interrupt endpoint...", size, size);
C_PARAMS (port);
CHECK_INIT (port);
/* Check if we read as many bytes as expected */
CHECK_SUPP (port, "check_int", port->pc->ops->check_int);
retval = port->pc->ops->check_int (port, data, size, port->timeout);
CHECK_RESULT (retval);
LOG_DATA (data, retval, size, "Read ", "from interrupt endpoint:");
return (retval);
}
/**
* \brief Seek on a port (for usb disk direct ports)
*
* \param port a #GPPort
* \param offset offset to seek to
* \param whence the underlying lseek call whence parameter
*
* Seeks to a specific offset on the usb disk
*
* \return a gphoto2 error code
**/
int
gp_port_seek (GPPort *port, int offset, int whence)
{
int retval;
gp_log (GP_LOG_DEBUG, "gphoto2-port", "Seeking to: %d whence: %d",
offset, whence);
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "seek", port->pc->ops->seek);
retval = port->pc->ops->seek (port, offset, whence);
gp_log (GP_LOG_DEBUG, "gphoto2-port", "Seek result: %d", retval);
return retval;
}
/**
* \brief Check for interrupt without wait
* \param port a GPPort
* \param data a pointer to an allocated buffer
* \param size the number of bytes that should be read
*
* Reads a specified number of bytes from the inerrupt endpoint
* into the supplied buffer.
* Function waits 50 miliseconds for data on interrupt endpoint.
*
* \return a gphoto2 error code
**/
int
gp_port_check_int_fast (GPPort *port, char *data, int size)
{
int retval;
CHECK_NULL (port);
CHECK_INIT (port);
/* Check if we read as many bytes as expected */
CHECK_SUPP (port, "check_int", port->pc->ops->check_int);
retval = port->pc->ops->check_int (port, data, size, FAST_TIMEOUT);
CHECK_RESULT (retval);
#ifdef IGNORE_EMPTY_INTR_READS
if (retval != size && retval != 0 )
#else
if (retval != size )
#endif
gp_log (GP_LOG_DEBUG, "gphoto2-port", ngettext(
"Could only read %i out of %i byte",
"Could only read %i out of %i bytes",
size
), retval, size);
#ifdef IGNORE_EMPTY_INTR_READS
if ( retval != 0 ) {
#endif
/* For Canon cameras, we will make lots of
reads that will return zero length. Don't
bother to log them as errors. */
gp_log (GP_LOG_DEBUG, "gphoto2-port",
ngettext(
"Reading %i=0x%x byte from interrupt endpoint (fast)...",
"Reading %i=0x%x bytes from interrupt endpoint (fast)...",
size
),
size, size);
gp_log_data ("gphoto2-port", data, retval);
#ifdef IGNORE_EMPTY_INTR_READS
}
#endif
return (retval);
}
/**
* \brief Set port settings
* \param port a #GPPort
* \param settings the #GPPortSettings to be set
*
* Adjusts the settings of a port. You should always call
* #gp_port_get_settings, adjust the values depending on the type of the port,
* and then call #gp_port_set_settings.
*
* \return a gphoto2 error code
**/
int
gp_port_set_settings (GPPort *port, GPPortSettings settings)
{
GP_LOG_D ("Setting settings...");
C_PARAMS (port);
CHECK_INIT (port);
/*
* We copy the settings to settings_pending and call update on the
* port.
*/
memcpy (&port->settings_pending, &settings,
sizeof (port->settings_pending));
CHECK_SUPP (port, "update", port->pc->ops->update);
CHECK_RESULT (port->pc->ops->update (port));
return (GP_OK);
}
/**
* \brief Set port settings
* \param port a #GPPort
* \param settings the #GPPortSettings to be set
*
* Adjusts the settings of a port. You should always call
* #gp_port_get_settings, adjust the values depending on the type of the port,
* and then call #gp_port_set_settings.
*
* \return a gphoto2 error code
**/
int
gp_port_set_settings (GPPort *port, GPPortSettings settings)
{
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Setting settings..."));
CHECK_NULL (port);
CHECK_INIT (port);
/*
* We copy the settings to settings_pending and call update on the
* port.
*/
memcpy (&port->settings_pending, &settings,
sizeof (port->settings_pending));
CHECK_SUPP (port, "update", port->pc->ops->update);
CHECK_RESULT (port->pc->ops->update (port));
return (GP_OK);
}
/**
* \brief Send a USB control message with output data
*
* \param port a GPPort
* \param request control request code
* \param value control value
* \param index control index
* \param bytes pointer to data
* \param size size of the data
*
* Sends a specific USB control command and write associated data.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_msg_write (GPPort *port, int request, int value, int index,
char *bytes, int size)
{
int retval;
gp_log (GP_LOG_DEBUG, "gphoto2-port", _("Writing message "
"(request=0x%x value=0x%x index=0x%x size=%i=0x%x)..."),
request, value, index, size, size);
gp_log_data ("gphoto2-port", bytes, size);
CHECK_NULL (port);
CHECK_INIT (port);
CHECK_SUPP (port, "msg_write", port->pc->ops->msg_write);
retval = port->pc->ops->msg_write(port, request, value, index, bytes, size);
CHECK_RESULT (retval);
return (retval);
}
/**
* \brief Send a USB control message with input data
*
* \param port a GPPort
* \param request control request code
* \param value control value
* \param index control index
* \param bytes pointer to data
* \param size size of the data
*
* Sends a specific USB interface control command and read associated data.
*
* \return a gphoto2 error code
*/
int
gp_port_usb_msg_read (GPPort *port, int request, int value, int index,
char *bytes, int size)
{
int retval;
gp_log (GP_LOG_DATA, __func__, "Reading message (request=0x%x value=0x%x index=0x%x size=%i=0x%x)...",
request, value, index, size, size);
C_PARAMS (port);
CHECK_INIT (port);
CHECK_SUPP (port, "msg_read", port->pc->ops->msg_read);
retval = port->pc->ops->msg_read (port, request, value, index, bytes, size);
CHECK_RESULT (retval);
LOG_DATA (bytes, retval, size, "Read", "USB message (request=0x%x value=0x%x index=0x%x size=%i=0x%x)",
request, value, index, size, size);
return (retval);
}
/**
* \brief Read data from port
*
* \param port a #GPPort
* \param data a pointer to an allocated buffer
* \param size the number of bytes that should be read
*
* Reads a specified number of bytes from the port into the supplied buffer.
* It returns the number of bytes read or a negative error code.
*
* \return a gphoto2 error code or the amount of data read
**/
int
gp_port_read (GPPort *port, char *data, int size)
{
int retval;
gp_log (GP_LOG_DATA, __func__, "Reading %i = 0x%x bytes from port...", size, size);
C_PARAMS (port);
CHECK_INIT (port);
/* Check if we read as many bytes as expected */
CHECK_SUPP (port, "read", port->pc->ops->read);
retval = port->pc->ops->read (port, data, size);
if (retval < 0) {
GP_LOG_E ("Reading %i = 0x%x bytes from port failed: %s (%d)",
size, size, gp_port_result_as_string(retval), retval);
return retval;
}
LOG_DATA (data, retval, size, "Read ", "from port:");
return (retval);
}
