コード例 #1
0
ファイル: hd44780.c プロジェクト: benson-zerties/ethersex
void hd44780_init(void)
{

    /* init io pins */
    CTRL_OUTPUT();
    PIN_CLEAR(HD44780_RS);
    PIN_CLEAR(HD44780_EN);
#ifdef HAVE_HD44780_RW
    PIN_CLEAR(HD44780_RW);
#endif
    PIN_CLEAR(HD44780_D4);
    PIN_CLEAR(HD44780_D5);
    PIN_CLEAR(HD44780_D6);
    PIN_CLEAR(HD44780_D7);
    DATA_OUTPUT();

    _delay_ms(40);
    PIN_SET(HD44780_D4);
    PIN_SET(HD44780_D5);
    clock_write();

    _delay_ms(4);
    clock_write();

    _delay_ms(1);
    clock_write();

    /* init done */
    _delay_ms(1);
    PIN_CLEAR(HD44780_D4);
    clock_write();
    _delay_ms(1);

    /* configure for 4 bit, 2 lines, 5x9 font (datasheet, page 24) */
    output_byte(0, CMD_FUNCTIONSET(0, 1, 0));

    /* turn on display, cursor and blinking */
    hd44780_config(0,0);

    /* clear display */
    hd44780_clear();

    /* set shift and increment */
    output_byte(0, CMD_ENTRY_MODE(1, 0));

    /* set ddram address */
    output_byte(0, CMD_SETDRAMADR(0));

    /* open file descriptor */
    lcd = fdevopen(hd44780_put, NULL);
    
    /* set current virtual postion */
    current_pos = 0;
}
コード例 #2
0
ファイル: hd44780_core.c プロジェクト: HansBaechle/ethersex
void hd44780_init(void)
{
    /* verschiedene Hardware initialisieren */
    hd44780_hw_init();
    _delay_ms(40);

#if HD44780_TYPE == HD44780_KS0066U
    /* Hardware initialisiert -> Standardprozedur KS0066U Datenblatt 4bit Mode */
    output_nibble(0, 0x02);
#else
    /* Hardware initialisiert -> Standardprozedur HD44780 Datenblatt 4bit Mode */
    output_nibble(0, 0x03);

    _delay_ms(4);
    clock_write();

    _delay_ms(1);
    clock_write();

    _delay_ms(1);
    output_nibble(0, 0x02);		//4bit mode
    _delay_ms(1);
    /* init done */
#endif

    /* configure for 4 bit, 2 lines, 5x9 font (datasheet, page 24) */
    output_byte(0, CMD_FUNCTIONSET(0, 1, 0));

    /* turn on display, cursor and blinking */
    hd44780_config(0,0);

    /* clear display */
    hd44780_clear();

    /* set shift and increment */
    output_byte(0, CMD_ENTRY_MODE(1, 0));

    /* set ddram address */
    output_byte(0, CMD_SETDRAMADR(0));

    /* open file descriptor */
    lcd = fdevopen(hd44780_put, NULL);

    /* set current virtual postion */
    current_pos = 0;
}
コード例 #3
0
ファイル: hd44780_core.c プロジェクト: NeoBelerophon/ethersex
int hd44780_put(char d, FILE *stream)
{
    uint8_t start = 0;

#ifdef HD44780_MULTIENSUPPORT
    uint8_t en = 1;
#endif
    if (d == '\n') {
	while (current_pos % LCD_CHAR_PER_LINE > 0)
	    hd44780_put(' ', stream);

	if (current_pos >= LCD_MAX_CHAR)
	    current_pos -= LCD_MAX_CHAR;

	return 0;
    } else if (d == '\r') {
	current_pos -= current_pos % LCD_CHAR_PER_LINE;
	return 0;
    }

    if (current_pos <= LCD_CHAR_PER_LINE - 1)
       {
	start = LCD_LINE_1_ADR - 0 + current_pos;
#ifdef HD44780_MULTIENSUPPORT
	en = LCD_LINE_1_EN;	
#endif
	}
    else if (current_pos <= ( LCD_CHAR_PER_LINE * 2) - 1 )
    	{
	 start = LCD_LINE_2_ADR - LCD_CHAR_PER_LINE + current_pos;
#ifdef HD44780_MULTIENSUPPORT
	 en = LCD_LINE_2_EN;	
#endif
	}
    else if (current_pos <= ( LCD_CHAR_PER_LINE * 3) - 1 )
        {
	 start = LCD_LINE_3_ADR - (LCD_CHAR_PER_LINE * 2) + current_pos;
#ifdef HD44780_MULTIENSUPPORT
	 en = LCD_LINE_3_EN;	
#endif
	}
    else if (current_pos <= ( LCD_CHAR_PER_LINE * 4) - 1 )
        {
	 start = LCD_LINE_4_ADR - (LCD_CHAR_PER_LINE * 3) + current_pos;
#ifdef HD44780_MULTIENSUPPORT
	 en = LCD_LINE_4_EN;	
#endif
	}
    
 
#ifdef HD44780_MULTIENSUPPORT
    output_byte(0, CMD_SETDRAMADR(start), en);
#else
    output_byte(0, CMD_SETDRAMADR(start), 1);
#endif

#ifdef DEBUG_HD44780
    _delay_ms(50);
#endif

#ifdef HD44780_MULTIENSUPPORT
    output_byte(1, d, en);
#else
    output_byte(1, d, 1);
#endif
    current_pos++;

    if (current_pos == LCD_MAX_CHAR)
        current_pos = 0;

    return 0;
}
コード例 #4
0
ファイル: hd44780_core.c プロジェクト: HansBaechle/ethersex
int hd44780_put(char d, FILE *stream)
{
    uint8_t start = 0;

    if (d == '\n') {
	while (current_pos % 20 > 0)
	    hd44780_put(' ', stream);

	if (current_pos >= 80)
	    current_pos -= 80;

	return 0;
    } else if (d == '\r') {
	current_pos -= current_pos % 20;
	return 0;
    }

#if HD44780_TYPE == HD44780_ORIGINAL
    if (current_pos <= 19)
        start = 0x00 - 00 + current_pos;
    else if (current_pos <= 39)
        start = 0x20 - 20 + current_pos;
    else if (current_pos <= 59)
        start = 0x40 - 40 + current_pos;
    else if (current_pos <= 79)
        start = 0x60 - 60 + current_pos;
#elif HD44780_TYPE == HD44780_DISPTECH
    if (current_pos <= 19)
        start = 0x00 - 0 + current_pos;
    else if (current_pos <= 39)
        start = 0x40 - 20 + current_pos;
    else if (current_pos <= 59)
        start = 0x10 - 40 + current_pos;
    else if (current_pos <= 79)
        start = 0x50 - 60 + current_pos;
#elif HD44780_TYPE == HD44780_KS0067B
    if (current_pos <= 19)
        start = 0x00 - 0 + current_pos;
    else if (current_pos <= 39)
        start = 0x40 - 20 + current_pos;
    else if (current_pos <= 59)
        start = 0x14 - 40 + current_pos;
    else if (current_pos <= 79)
        start = 0x54 - 60 + current_pos;
#elif HD44780_TYPE == HD44780_KS0066U
    if (current_pos <= 19)
        start = 0x00 - 0 + current_pos;
    else if (current_pos <= 39)
        start = 0x40 - 20 + current_pos;
    else if (current_pos <= 59)
        start = 0x10 - 40 + current_pos;
    else if (current_pos <= 79)
        start = 0x50 - 60 + current_pos;
#else
#error "unknown hd44780 compatible controller type!"
#endif

    output_byte(0, CMD_SETDRAMADR(start));
#ifdef DEBUG_HD44780
    _delay_ms(50);
#endif

    output_byte(1, d);
    current_pos++;

    if (current_pos == 80)
        current_pos = 0;

    return 0;
}
コード例 #5
0
ファイル: hd44780_core.c プロジェクト: FordPrfkt/HomeControl
void hd44780_init(void)
{
    /* verschiedene Hardware initialisieren */
    hd44780_hw_init();
    _delay_ms(40);

#if CONF_HD44780_TYPE == HD44780_KS0066U
    /* Hardware initialisiert -> Standardprozedur KS0066U Datenblatt 4bit Mode */
    output_nibble(0, 0x02, 1);
#else
    /* Hardware initialisiert -> Standardprozedur HD44780 Datenblatt 4bit Mode */
    output_nibble(0, 0x03,1);

    _delay_ms(4);
#ifdef HD44780_2WIRE
    output_nibble(0, 0x03,1);
#else
    clock_write(1);
#endif /*HD44780_2WIRE*/

    _delay_ms(1);
#ifdef HD44780_2WIRE
	output_nibble(0, 0x03,1);
#else
    clock_write(1);
#endif /*HD44780_2WIRE*/

    _delay_ms(1);
    output_nibble(0, 0x02,1);		//4bit mode
    _delay_ms(1);
    /* init done */
#endif /*CONF_HD44780_TYPE*/

    /* configure for 4 bit, 2 lines, 5x8 font (datasheet, page 24) */
    output_byte(0, CMD_FUNCTIONSET(0, 1, 0), 1);

    /* turn on display, cursor and blinking */
    hd44780_config(0,0,1);

    /* clear display */
    hd44780_clear(1);
    /* set shift and increment */
    output_byte(0, CMD_ENTRY_MODE(1, 0),1);

    /* set ddram address */
    output_byte(0, CMD_SETDRAMADR(0),1);

/*Configure Controller 2 */
#ifdef HD44780_MULTIENSUPPORT
    /* verschiedene Hardware initialisieren */
    hd44780_hw_init();
    _delay_ms(40);

#if CONF_HD44780_TYPE == HD44780_KS0066U
    /* Hardware initialisiert -> Standardprozedur KS0066U Datenblatt 4bit Mode */
    output_nibble(0, 0x02, 2);
#else
    /* Hardware initialisiert -> Standardprozedur HD44780 Datenblatt 4bit Mode */
    output_nibble(0, 0x03,2);

    _delay_ms(4);
    clock_write(2);

    _delay_ms(1);
    clock_write(2);

    _delay_ms(1);
    output_nibble(0, 0x02,2);		//4bit mode
    _delay_ms(1);
    /* init done */
#endif

    /* configure for 4 bit, 2 lines, 5x9 font (datasheet, page 24) */
    output_byte(0, CMD_FUNCTIONSET(0, 1, 0), 2);

    /* turn on display, cursor and blinking */
    hd44780_config(0,0,2);

    /* clear display */
    hd44780_clear(2);
    /* set shift and increment */
    output_byte(0, CMD_ENTRY_MODE(1, 0),2);

    /* set ddram address */
    output_byte(0, CMD_SETDRAMADR(0),2);
#endif

    /* set current virtual postion */
    current_pos = 0;


}