SDL_Surface *loadImage(std::string filename,bool UseA)
{
if (SDL_WasInit(SDL_INIT_VIDEO)==0)
{
SDL_Init(SDL_INIT_VIDEO);
};
SDL_Surface* original=NULL;
SDL_Surface* newImage=NULL;
original=IMG_Load(filename.c_str());
if (original!=NULL)
{
if (UseA==true)
{
newImage=SDL_DisplayFormatAlpha(original);
}
else
{
newImage=SDL_DisplayFormat(original);
};
SDL_FreeSurface(original);
};
if (newImage==NULL)
{
CONSOLE_WRITE(" "+filename+" did not load correctly");
};
return newImage;
};
bool TBFE::addTileSet(std::string Source)
{
if (renderWindow_.addTileSet("Images/TileSets/"+Source))
{
CONSOLE_WRITE(" File Does not exist");
return false;
};
Current_Map.addTileSet(Source);
};
void TBFE::addActor(Actor *NewActor)
{
if (NewActor!=NULL)
{
actors.push_back(NewActor);
}
else
{
CONSOLE_WRITE(" Actor is equal to NULL");
};
};
bool Map::loadMap(string filename)
{
ifstream NewMapData(filename.c_str(),ifstream::binary);
if (NewMapData==NULL)
{
return false;
};
PositionI dimensions;
dimensions.X=NewMapData.get();
dimensions.Y=NewMapData.get();
scriptFile_=loadString(&NewMapData,(char)3);
tileSetNames_.resize(NewMapData.get());
for (int TileSetsNum=0;TileSetsNum<tileSetNames_.size();TileSetsNum++)
{
tileSetNames_.at(TileSetsNum)=loadString(&NewMapData,(char)3);
};
string LayerString=loadString(&NewMapData,"|");
do
{
TileLayer newLayer(dimensions.X,dimensions.Y);
for (int FillMap=0;FillMap<dimensions.X*dimensions.Y;FillMap++)
{
Tile newTile;
newTile.TileSet=(int)nextChar(&LayerString);
newTile.Type=(TileType)nextChar(&LayerString);
newTile.Passability=(int)nextChar(&LayerString);
newLayer.changeTile(FillMap-FillMap/dimensions.X*dimensions.X,FillMap/dimensions.X,newTile);
};
addLayer(newLayer);
string LayerString=loadString(&NewMapData,'|');
} while (LayerString!="");
CONSOLE_WRITE("Map Scripts");
CONSOLE_WRITE("===========");
CONSOLE_RUN_FILE("Maps/"+scriptFile_);
CONSOLE_WRITE("===========");
return true;
};
Uint32 getPixel( SDL_Surface *surface, int x, int y )
{
if (surface==NULL)
{
CONSOLE_WRITE("surface does not exist");
return -1;
};
if (x>surface->w || y>surface->h || x<0 || y<0)
{
return -1;
};
//Convert the pixels to 32 bit
Uint32 *pixels = (Uint32 *)surface->pixels;
//Get the requested pixel
return pixels[ ( y * surface->w ) + x ];
}
GLuint bindImage(SDL_Surface * textureSource)
{
if (textureSource==NULL)
{
return 0;
};
GLuint texture;
GLint colors;
GLenum format;
colors=textureSource->format->BytesPerPixel;
if (colors == 4) // contains an alpha channel
{
if (textureSource->format->Rmask == 0x000000ff)
format = GL_RGBA;
else
format = GL_BGRA;
} else if (colors == 3) // no alpha channel
{
if (textureSource->format->Rmask == 0x000000ff)
format = GL_RGB;
else
format = GL_BGR;
}
else
{
CONSOLE_WRITE("texture fail");
};
glTexEnvf( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE );
glGenTextures(1,&texture);
glBindTexture(GL_TEXTURE_2D,texture);
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR);
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR);
SDL_LockSurface(textureSource);
glTexImage2D(GL_TEXTURE_2D,0,colors,textureSource->w,textureSource->h,0,format,
GL_UNSIGNED_BYTE,textureSource->pixels);
SDL_UnlockSurface(textureSource);
return texture;
};
int main (int argc, char **argv)
{
GPIO_InitTypeDef GPIO_InitStruct;
board_init(); // Turn off WDT, init MCU clocks, ...
board_systick_timer_config(); // configure 1 ms timer
LED1_INIT(); // Setup LED1 for output
// LED2_INIT(); // Setup LED2 for output not on STM32
#if (UART_CHECKOUT)
while (uart_test1) // TEMP DEBUG of Baud Rate
CONSOLE_WRITE ("\n\rInitialization complete. Type in a config parm:\n\r");
while ( ! CONSOLE_CHECK_FOR_INPUT() )
; // loop till get some data
CONSOLE_READ_STRING ((char*) uart_cmd_buf, 12);
CONSOLE_WRITE ("Type in a single char: ");
ret_code = 0;
while (ret_code == 0) // wait till we get a char in
ret_code = CONSOLE_GET_CHAR();
CONSOLE_WRITE_CHAR (ret_code); // echo it
#endif
//-------------------------------------------------------------
// Setup GPIOs to operate in Timer/PWM mode
//
// Start with PA8 (Arduino D7) = TIM1_CH1
//-------------------------------------------------------------
/* TIM1 module - Channel 1 output */
GPIO_InitStruct.Pin = GPIO_PIN_8; // PA8 = Arduino D7
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1; // Alt Func = Timer/PWM
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
HAL_GPIO_Init (GPIOA, &GPIO_InitStruct);
/* TIM1 module - Channel 1 complementary output */
GPIO_InitStruct.Pin = GPIO_PIN_13; // PB13 - not on Arduino - Morpho CN10 - 30
HAL_GPIO_Init (GPIOB, &GPIO_InitStruct);
//------------------------------------
// Configure PWM module to be used
//------------------------------------
// SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f4xx.c file.
uwPeriod = (SystemCoreClock / 20000 ) - 1; // set period = 20 K Hz
ret_code = board_pwm_init_module (PWM_MODULE_1, PWM_COUNT_DOWN,
uwPeriod, 0);
//------------------------------------
// Configure PWM channel(s) to be used
//------------------------------------
ret_code = board_pwm_config_channel (PWM_MODULE_1, PWM_CHANNEL_1,
(uwPeriod/4), 0); // 25 % duty cycle
//---------------------------------------------------
// Enable the PWM module and its associated channels
//---------------------------------------------------
ret_code = board_pwm_enable (PWM_MODULE_1, 0);
while (1)
{
// initial checkout - see if PWM is working
LED1_TOGGLE(); // show activity
board_delay_ms (1000);
}
// ----- INITIAL CHECKOUT -----
#if (LATER)
//-------------------------------------------------------------
// Ensure DRV8848 is OFF during config.
// setup nSLEEP PB_2 pin (J2-2) to LOW to turn off the DRV8848
//-------------------------------------------------------------
pin_Config (Pin19, GPIO_OUTPUT);
pin_Low (Pin19);
//-----------------------------------------------------------------
// Setup PWMs to drive the DRV8711 Stepper
//-----------------------------------------------------------------
// first, get the period for a 20 K Hz PWM frequency
pwm_period = board_frequency_to_period_ticks (PWM_20K_FREQUENCY);
// then initialize the needed PWMs, passing in startup period
//-------------------------------------------------------------
// do basic setup for PWM and Interval Timer (turn on clocks)
// Skipping the /32 gives better accuracy (20.004 KHz vs 20.81 K Hz using /32)
//-------------------------------------------------------------
// MAP_SysCtlPWMClockSet (SYSCTL_PWMDIV_32); // do not do / 32 of Master clock and see results
MAP_SysCtlPWMClockSet (SYSCTL_PWMDIV_1); // Setup Master PWM I/O clock
MAP_SysCtlPeripheralEnable (SYSCTL_PERIPH_PWM1); // turn on PWM module 1 clock
// mg_PWMclock = MAP_SysCtlClockGet() / 32; // save Max PWM Clock value
mg_PWMclock = MAP_SysCtlClockGet(); // save Max PWM Clock value
mg_Sysclock = MAP_SysCtlClockGet(); // This says 80 MHz
nmap_SysClkTicks = MAP_SysCtlClockGet(); // This says 80 MHz after switching over to MAP_ version.
// Before that, non MAP_ version was saying 66 MHz, which is whacked out
//------------------------------------------------------------------------------
// Setup PWM pins that are used by DRV8848
//
// PWM A / AIN1 = PA_4 TA1.2 J2-8 PWM B / BIN1 = PA_6 TA1.1 J1-9
// DIR A / AIN2 = PA_3 TA1CCR2 J2-9 DIR B / BIN2 = PA_7 TA1CCR1 J1-10
// nSLEEP = PB_2 J2-2 nFAULT = PE_0 J2-3
// VREF = PE_4 Adc9 J1-5
//------------------------------------------------------------------------------
// setup DRV8701 STEP_AIN1 PA_6 pin (J1-9) for PWM mode
// setup DRV8848 BIN1 PA_6 pin (J1-9) for PWM mode
MAP_GPIOPinTypePWM (GPIO_PORTA_BASE, GPIO_PIN_6); // setup BIN1 PWM (J1-9)
MAP_GPIOPinConfigure (GPIO_PA6_M1PWM2);
//------------------------------------------------
// Setup PWM and associated Count mode.
// Tiva only supports DOWN counts, not UP counts
//------------------------------------------------
MAP_PWMGenConfigure (PWM1_BASE, PWM_GEN_1, PWM_GEN_MODE_DOWN);
// setup default PWM Period and duty cycle
mg_PWMperiod = (mg_PWMclock / PWM_20K_FREQUENCY) - 1; // default period /32 = 124 (125 - 1)
// default period /1 = 3999 (4000 - 1)
MAP_PWMGenPeriodSet (PWM1_BASE, PWM_GEN_1, mg_PWMperiod);
MAP_PWMPulseWidthSet (PWM1_BASE, PWM_OUT_2, mg_PWMperiod / 4); // duty of 25 %
pwm_duty_value = mg_PWMperiod / 4; // save it for ADC checks
//-----------------------
// Start up the PWM
//-----------------------
MAP_PWMGenEnable (PWM1_BASE, PWM_GEN_1); // start up the PWM ??? need ???
MAP_PWMOutputState (PWM1_BASE, PWM_OUT_2_BIT, true); // Enable PWM pin output
//-----------------------------------------
// setup DIR BIN2 PA_7 pin (J1-10) to LOW
//-----------------------------------------
pin_Config (Pin10, GPIO_OUTPUT); // setup BIN2 DIR (J1-10)
pin_Low (Pin10);
//-----------------------------------------
// Turn off AIN1 PWM and AIN2 DIR pins PA_4 / PA_3 pins (J2-8/J2-9) to LOW
//-----------------------------------------
pin_Config (Pin13, GPIO_OUTPUT); // setup AIN1 PWM (J2-8)
pin_Low (Pin13);
pin_Config (Pin12, GPIO_OUTPUT); // setup AIN2 DIR (J2-9)
pin_Low (Pin12);
//-------------------------------------------------------------
// set nSLEEP PB_2 pin (J2-2) to HIGH to turn on the DRV8848
//-------------------------------------------------------------
pin_High (Pin19);
while (1)
{
// LED1_TOGGLE(); // Setup LED1 for output
if (adc_Check_All_Complete())
{ // we have a completed ADC reading. Pull in the latest reading
adc_Read (&adc_value);
if ( (adc_value > (adc_cur_value +10)) || (adc_value < (adc_cur_value - 1)) )
{ // we have a major change in valu. Update the PWM
adc_cur_value = adc_value;
// scale the PWM Duty_Cycle (o - 4000) value to match the ADC value (0-4096)
if (adc_cur_value > 3999)
pwm_duty_value = 3999;
else pwm_duty_value = adc_value;
// set the new PWM duty ccyle
MAP_PWMPulseWidthSet (PWM1_BASE, PWM_OUT_2, pwm_duty_value);
// start a new ADC sampling cycle
adc_Trigger_Start();
}
}
board_delay_ms (250); // wait 250 ms (1/4 sec) between samples
}
#endif
}
