static void initHardware(void)
{
SystemCoreClockUpdate();
SysTick_Config(SystemCoreClock/1000);
Board_Init();
Board_LED_Set(0, false);
/* Timer */
Chip_TIMER_Init(LPC_TIMER1);
Chip_TIMER_PrescaleSet(LPC_TIMER1,
#ifdef lpc1769
Chip_Clock_GetPeripheralClockRate(SYSCTL_PCLK_TIMER1) / 1000000 - 1
#else
Chip_Clock_GetRate(CLK_MX_TIMER1) / 1000000 - 1
#endif
);
/* Match 0 (period) */
Chip_TIMER_MatchEnableInt(LPC_TIMER1, 0);
Chip_TIMER_ResetOnMatchEnable(LPC_TIMER1, 0);
Chip_TIMER_StopOnMatchDisable(LPC_TIMER1, 0);
Chip_TIMER_SetMatch(LPC_TIMER1, 0, 1000);
/* Match 1 (duty) */
Chip_TIMER_MatchEnableInt(LPC_TIMER1, 1);
Chip_TIMER_ResetOnMatchDisable(LPC_TIMER1, 1);
Chip_TIMER_StopOnMatchDisable(LPC_TIMER1, 1);
Chip_TIMER_SetMatch(LPC_TIMER1, 1, 100);
Chip_TIMER_Reset(LPC_TIMER1);
Chip_TIMER_Enable(LPC_TIMER1);
NVIC_EnableIRQ(TIMER1_IRQn);
}
uint32_t PWMSetPeriod(uint8_t channel, uint32_t period) {
if (channel > CHANNEL_C_TIMER_INDEX) {
return 1;
}
if (eDVSMode != EDVS_MODE_INTERNAL && channel == 0) {
return 1; // channel 0 taken for master/slave mode
}
LPC_TIMER_T * timer = halTimers[channel].timer;
halTimers[channel].period = period;
/**
* If the period equal 0, the timer is disable and its outputs are set as GPIO and driven low.
*/
if (period == 0) {
Chip_TIMER_DeInit(timer); //Stop the timer
Chip_TIMER_SetMatch(timer, 2, 0);
halTimers[channel].enabled[0] = DISABLE;
halTimers[channel].enabled[1] = DISABLE;
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, halTimers[channel].portGpio[0], halTimers[channel].pinGpio[0]);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, halTimers[channel].portGpio[1], halTimers[channel].pinGpio[1]);
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, halTimers[channel].portGpio[0], halTimers[channel].pinGpio[0]);
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, halTimers[channel].portGpio[1], halTimers[channel].pinGpio[1]);
Chip_SCU_PinMuxSet(halTimers[channel].port[0], halTimers[channel].pin[0], halTimers[channel].gpioMode[0]);
Chip_SCU_PinMuxSet(halTimers[channel].port[1], halTimers[channel].pin[1], halTimers[channel].gpioMode[1]);
} else {
/**
* The channel match 2 is used as the controller of the base frequency.
* When there is a match on this channel, the timer is reset and the external match bit
* is set to 1.
* The M0 core is looking for this change and it sets the output of the channels to high.
*/
Chip_TIMER_Init(timer);
Chip_TIMER_Disable(timer);
Chip_TIMER_Reset(timer);
/**
* The Main clock is running at 192Mhz so set the Prescaler in order to have
* a 1 Mhz timer. Timer_CLK = Main_CLK/ (PR+1)
*/
Chip_TIMER_PrescaleSet(timer, 191);
Chip_TIMER_ResetOnMatchEnable(timer, 2);
Chip_TIMER_StopOnMatchDisable(timer, 2);
Chip_TIMER_MatchDisableInt(timer, 2);
Chip_TIMER_SetMatch(timer, 2, period);
//Reconfigure match channels!
if (halTimers[channel].enabled[0]) {
PWMSetWidth(channel, 0, halTimers[channel].witdh[0]);
}
if (halTimers[channel].enabled[1]) {
PWMSetWidth(channel, 1, halTimers[channel].witdh[1]);
}
Chip_TIMER_ExtMatchControlSet(timer, 0, TIMER_EXTMATCH_SET, 2);
// Clear interrupt pending
timer->IR = 0xFFFFFFFF;
Chip_TIMER_Enable(timer);
}
return 0;
}
void PWMInit(void) {
halTimers[CHANNEL_A_TIMER_INDEX].timer = CHANNEL_A_TIMER;
halTimers[CHANNEL_A_TIMER_INDEX].port[0] = CHANNEL_A_0_PORT;
halTimers[CHANNEL_A_TIMER_INDEX].port[1] = CHANNEL_A_1_PORT;
halTimers[CHANNEL_A_TIMER_INDEX].pin[0] = CHANNEL_A_0_PIN;
halTimers[CHANNEL_A_TIMER_INDEX].pin[1] = CHANNEL_A_1_PIN;
halTimers[CHANNEL_A_TIMER_INDEX].portGpio[0] = CHANNEL_A_0_PORT_GPIO;
halTimers[CHANNEL_A_TIMER_INDEX].portGpio[1] = CHANNEL_A_1_PORT_GPIO;
halTimers[CHANNEL_A_TIMER_INDEX].pinGpio[0] = CHANNEL_A_0_PIN_GPIO;
halTimers[CHANNEL_A_TIMER_INDEX].pinGpio[1] = CHANNEL_A_1_PIN_GPIO;
halTimers[CHANNEL_A_TIMER_INDEX].timerMode[0] = MD_PUP | FUNC6;
halTimers[CHANNEL_A_TIMER_INDEX].timerMode[1] = MD_PUP | FUNC6;
halTimers[CHANNEL_A_TIMER_INDEX].gpioMode[0] = MD_PUP | FUNC4;
halTimers[CHANNEL_A_TIMER_INDEX].gpioMode[1] = MD_PUP | FUNC4;
halTimers[CHANNEL_A_TIMER_INDEX].timerChannel[0] = 0;
halTimers[CHANNEL_A_TIMER_INDEX].timerChannel[1] = 1;
halTimers[CHANNEL_A_TIMER_INDEX].witdh[0] = 0;
halTimers[CHANNEL_A_TIMER_INDEX].witdh[1] = 0;
halTimers[CHANNEL_A_TIMER_INDEX].enabled[0] = 0;
halTimers[CHANNEL_A_TIMER_INDEX].enabled[1] = 0;
halTimers[CHANNEL_A_TIMER_INDEX].period = 0;
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_A_0_PORT_GPIO, CHANNEL_A_0_PIN_GPIO);
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_A_1_PORT_GPIO, CHANNEL_A_1_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_A_0_PORT_GPIO, CHANNEL_A_0_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_A_1_PORT_GPIO, CHANNEL_A_1_PIN_GPIO);
Chip_SCU_PinMuxSet(CHANNEL_A_0_PORT, CHANNEL_A_0_PIN, halTimers[CHANNEL_A_TIMER_INDEX].gpioMode[0]);
Chip_SCU_PinMuxSet(CHANNEL_A_1_PORT, CHANNEL_A_1_PIN, halTimers[CHANNEL_A_TIMER_INDEX].gpioMode[1]);
halTimers[CHANNEL_B_TIMER_INDEX].timer = CHANNEL_B_TIMER;
halTimers[CHANNEL_B_TIMER_INDEX].port[0] = CHANNEL_B_0_PORT;
halTimers[CHANNEL_B_TIMER_INDEX].port[1] = CHANNEL_B_1_PORT;
halTimers[CHANNEL_B_TIMER_INDEX].pin[0] = CHANNEL_B_0_PIN;
halTimers[CHANNEL_B_TIMER_INDEX].pin[1] = CHANNEL_B_1_PIN;
halTimers[CHANNEL_B_TIMER_INDEX].portGpio[0] = CHANNEL_B_0_PORT_GPIO;
halTimers[CHANNEL_B_TIMER_INDEX].portGpio[1] = CHANNEL_B_1_PORT_GPIO;
halTimers[CHANNEL_B_TIMER_INDEX].pinGpio[0] = CHANNEL_B_0_PIN_GPIO;
halTimers[CHANNEL_B_TIMER_INDEX].pinGpio[1] = CHANNEL_B_1_PIN_GPIO;
halTimers[CHANNEL_B_TIMER_INDEX].timerMode[0] = MD_PUP | FUNC5;
halTimers[CHANNEL_B_TIMER_INDEX].timerMode[1] = MD_PUP | FUNC5;
halTimers[CHANNEL_B_TIMER_INDEX].gpioMode[0] = MD_PUP | FUNC4;
halTimers[CHANNEL_B_TIMER_INDEX].gpioMode[1] = MD_PUP | FUNC4;
halTimers[CHANNEL_B_TIMER_INDEX].timerChannel[0] = 0;
halTimers[CHANNEL_B_TIMER_INDEX].timerChannel[1] = 1;
halTimers[CHANNEL_B_TIMER_INDEX].witdh[0] = 0;
halTimers[CHANNEL_B_TIMER_INDEX].witdh[1] = 0;
halTimers[CHANNEL_B_TIMER_INDEX].enabled[0] = 0;
halTimers[CHANNEL_B_TIMER_INDEX].enabled[1] = 0;
halTimers[CHANNEL_B_TIMER_INDEX].period = 0;
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_B_0_PORT_GPIO, CHANNEL_B_0_PIN_GPIO);
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_B_1_PORT_GPIO, CHANNEL_B_1_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_B_0_PORT_GPIO, CHANNEL_B_0_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_B_1_PORT_GPIO, CHANNEL_B_1_PIN_GPIO);
Chip_SCU_PinMuxSet(CHANNEL_B_0_PORT, CHANNEL_B_0_PIN, halTimers[CHANNEL_B_TIMER_INDEX].gpioMode[0]);
Chip_SCU_PinMuxSet(CHANNEL_B_1_PORT, CHANNEL_B_1_PIN, halTimers[CHANNEL_B_TIMER_INDEX].gpioMode[1]);
halTimers[CHANNEL_C_TIMER_INDEX].timer = CHANNEL_C_TIMER;
halTimers[CHANNEL_C_TIMER_INDEX].port[0] = CHANNEL_C_0_PORT;
halTimers[CHANNEL_C_TIMER_INDEX].port[1] = CHANNEL_C_1_PORT;
halTimers[CHANNEL_C_TIMER_INDEX].pin[0] = CHANNEL_C_0_PIN;
halTimers[CHANNEL_C_TIMER_INDEX].pin[1] = CHANNEL_C_1_PIN;
halTimers[CHANNEL_C_TIMER_INDEX].portGpio[0] = CHANNEL_C_0_PORT_GPIO;
halTimers[CHANNEL_C_TIMER_INDEX].portGpio[1] = CHANNEL_C_1_PORT_GPIO;
halTimers[CHANNEL_C_TIMER_INDEX].pinGpio[0] = CHANNEL_C_0_PIN_GPIO;
halTimers[CHANNEL_C_TIMER_INDEX].pinGpio[1] = CHANNEL_C_1_PIN_GPIO;
halTimers[CHANNEL_C_TIMER_INDEX].timerMode[0] = MD_PUP | FUNC1;
halTimers[CHANNEL_C_TIMER_INDEX].timerMode[1] = MD_PUP | FUNC1;
halTimers[CHANNEL_C_TIMER_INDEX].gpioMode[0] = MD_PUP | FUNC4;
halTimers[CHANNEL_C_TIMER_INDEX].gpioMode[1] = MD_PUP | FUNC0;
halTimers[CHANNEL_C_TIMER_INDEX].timerChannel[0] = 0;
halTimers[CHANNEL_C_TIMER_INDEX].timerChannel[1] = 3; // Special mapping for the Channel C_1
halTimers[CHANNEL_C_TIMER_INDEX].witdh[0] = 0;
halTimers[CHANNEL_C_TIMER_INDEX].witdh[1] = 0;
halTimers[CHANNEL_C_TIMER_INDEX].enabled[0] = 0;
halTimers[CHANNEL_C_TIMER_INDEX].enabled[1] = 0;
halTimers[CHANNEL_C_TIMER_INDEX].period = 0;
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_C_0_PORT_GPIO, CHANNEL_C_0_PIN_GPIO);
Chip_GPIO_SetPinOutLow(LPC_GPIO_PORT, CHANNEL_C_1_PORT_GPIO, CHANNEL_C_1_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_C_0_PORT_GPIO, CHANNEL_C_0_PIN_GPIO);
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, CHANNEL_C_1_PORT_GPIO, CHANNEL_C_1_PIN_GPIO);
Chip_SCU_PinMuxSet(CHANNEL_C_0_PORT, CHANNEL_C_0_PIN, halTimers[CHANNEL_C_TIMER_INDEX].gpioMode[0]);
Chip_SCU_PinMuxSet(CHANNEL_C_1_PORT, CHANNEL_C_1_PIN, halTimers[CHANNEL_C_TIMER_INDEX].gpioMode[1]);
for (int i = 0; i < 3; ++i) {
for (int j = 0; j < 2; ++j) {
Chip_TIMER_ResetOnMatchDisable(halTimers[i].timer, halTimers[i].timerChannel[j]);
Chip_TIMER_StopOnMatchDisable(halTimers[i].timer, halTimers[i].timerChannel[j]);
Chip_TIMER_MatchDisableInt(halTimers[i].timer, halTimers[i].timerChannel[j]);
Chip_TIMER_ExtMatchControlSet(halTimers[i].timer, 1, TIMER_EXTMATCH_CLEAR, halTimers[i].timerChannel[j]);
}
}
}
