/* Move marked items, at new position = old position + offset */ void MoveMarkedItems( MODULE* module, wxPoint offset ) { EDA_ITEM* item; if( module == NULL ) return; if( module->Reference().IsSelected() ) module->Reference().Move( offset ); if( module->Value().IsSelected() ) module->Value().Move( offset ); D_PAD* pad = module->Pads(); for( ; pad != NULL; pad = pad->Next() ) { if( !pad->IsSelected() ) continue; pad->SetPosition( pad->GetPosition() + offset ); pad->SetPos0( pad->GetPos0() + offset ); } item = module->GraphicalItems(); for( ; item != NULL; item = item->Next() ) { if( !item->IsSelected() ) continue; switch( item->Type() ) { case PCB_MODULE_TEXT_T: static_cast<TEXTE_MODULE*>( item )->Move( offset ); break; case PCB_MODULE_EDGE_T: { EDGE_MODULE* em = (EDGE_MODULE*) item; em->SetStart( em->GetStart() + offset ); em->SetEnd( em->GetEnd() + offset ); em->SetStart0( em->GetStart0() + offset ); em->SetEnd0( em->GetEnd0() + offset ); } break; default: ; } } ClearMarkItems( module ); }
/** Rotate marked items, refer to a rotation point at position offset * Note: because this function is used in global transform, * if force_all is true, all items will be rotated */ void RotateMarkedItems( MODULE* module, wxPoint offset, bool force_all ) { #define ROTATE( z ) RotatePoint( (&z), offset, 900 ) if( module == NULL ) return; if( module->Reference().IsSelected() || force_all ) module->Reference().Rotate( offset, 900 ); if( module->Value().IsSelected() || force_all ) module->Value().Rotate( offset, 900 ); for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() ) { if( !pad->IsSelected() && !force_all ) continue; wxPoint pos = pad->GetPos0(); ROTATE( pos ); pad->SetPos0( pos ); pad->SetOrientation( pad->GetOrientation() + 900 ); pad->SetDrawCoord(); } for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() ) { if( !item->IsSelected() && !force_all ) continue; switch( item->Type() ) { case PCB_MODULE_EDGE_T: ((EDGE_MODULE*) item)->Rotate( offset, 900 ); break; case PCB_MODULE_TEXT_T: static_cast<TEXTE_MODULE*>( item )->Rotate( offset, 900 ); break; default: break; } } ClearMarkItems( module ); }
/* Delete marked items */ void DeleteMarkedItems( MODULE* module ) { if( module == NULL ) return; D_PAD* next_pad; BOARD* board = module->GetBoard(); for( D_PAD* pad = module->Pads(); pad; pad = next_pad ) { next_pad = pad->Next(); if( !pad->IsSelected() ) continue; if( board ) board->PadDelete( pad ); else pad->DeleteStructure(); } BOARD_ITEM* next_item; for( BOARD_ITEM* item = module->GraphicalItems(); item; item = next_item ) { next_item = item->Next(); if( !item->IsSelected() ) continue; item->DeleteStructure(); } // Ref and value can be flagged, but cannot be deleted ClearMarkItems( module ); }
bool FOOTPRINT_EDIT_FRAME::HandleBlockEnd( wxDC* DC ) { int itemsCount = 0; bool nextcmd = false; MODULE* currentModule = GetBoard()->m_Modules; if( GetScreen()->m_BlockLocate.GetCount() ) { BLOCK_STATE_T state = GetScreen()->m_BlockLocate.GetState(); BLOCK_COMMAND_T command = GetScreen()->m_BlockLocate.GetCommand(); m_canvas->CallEndMouseCapture( DC ); GetScreen()->m_BlockLocate.SetState( state ); GetScreen()->m_BlockLocate.SetCommand( command ); m_canvas->SetMouseCapture( DrawAndSizingBlockOutlines, AbortBlockCurrentCommand ); SetCrossHairPosition( wxPoint( GetScreen()->m_BlockLocate.GetRight(), GetScreen()->m_BlockLocate.GetBottom() ) ); m_canvas->MoveCursorToCrossHair(); } switch( GetScreen()->m_BlockLocate.GetCommand() ) { case BLOCK_IDLE: DisplayError( this, wxT( "Error in HandleBlockPLace" ) ); break; case BLOCK_DRAG: // Drag case BLOCK_MOVE: // Move case BLOCK_COPY: // Copy itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) { nextcmd = true; if( m_canvas->IsMouseCaptured() ) { m_canvas->CallMouseCapture( DC, wxDefaultPosition, false ); m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines ); m_canvas->CallMouseCapture( DC, wxDefaultPosition, false ); } GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE ); m_canvas->Refresh( true ); } break; case BLOCK_PRESELECT_MOVE: // Move with preselection list nextcmd = true; m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines ); GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE ); break; case BLOCK_DELETE: // Delete itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); DeleteMarkedItems( currentModule ); break; case BLOCK_SAVE: // Save case BLOCK_PASTE: break; case BLOCK_ROTATE: itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); RotateMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() ); break; case BLOCK_MIRROR_X: case BLOCK_MIRROR_Y: case BLOCK_FLIP: // mirror itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); MirrorMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() ); break; case BLOCK_ZOOM: // Window Zoom Window_Zoom( GetScreen()->m_BlockLocate ); break; case BLOCK_ABORT: break; case BLOCK_SELECT_ITEMS_ONLY: break; } if( !nextcmd ) { if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_SELECT_ITEMS_ONLY ) { ClearMarkItems( currentModule ); } GetScreen()->ClearBlockCommand(); SetCurItem( NULL ); m_canvas->EndMouseCapture( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString, false ); m_canvas->Refresh( true ); } return nextcmd; }
/* Mark items inside rect. * Items are inside rect when an end point is inside rect */ int MarkItemsInBloc( MODULE* module, EDA_RECT& Rect ) { EDA_ITEM* item; int ItemsCount = 0; wxPoint pos; D_PAD* pad; if( module == NULL ) return 0; ClearMarkItems( module ); // Just in case ... pos = module->Reference().GetTextPosition(); if( Rect.Contains( pos ) ) { module->Reference().SetFlags( SELECTED ); ItemsCount++; } pos = module->Value().GetTextPosition(); if( Rect.Contains( pos ) ) { module->Value().SetFlags( SELECTED ); ItemsCount++; } pad = module->Pads(); for( ; pad != NULL; pad = pad->Next() ) { pad->ClearFlags( SELECTED ); pos = pad->GetPosition(); if( Rect.Contains( pos ) ) { pad->SetFlags( SELECTED ); ItemsCount++; } } item = module->GraphicalItems(); for( ; item != NULL; item = item->Next() ) { item->ClearFlags( SELECTED ); switch( item->Type() ) { case PCB_MODULE_EDGE_T: if( ((EDGE_MODULE*)item )->HitTest( Rect ) ) { item->SetFlags( SELECTED ); ItemsCount++; } break; case PCB_MODULE_TEXT_T: pos = static_cast<TEXTE_MODULE*>( item )->GetTextPosition(); if( Rect.Contains( pos ) ) { item->SetFlags( SELECTED ); ItemsCount++; } break; default: break; } } return ItemsCount; }
void MoveMarkedItemsExactly( MODULE* module, const wxPoint& centre, const wxPoint& translation, double rotation, bool force_all ) { if( module == NULL ) return; if( module->Reference().IsSelected() || force_all ) { module->Reference().Rotate( centre, rotation ); module->Reference().Move( translation ); } if( module->Value().IsSelected() || force_all ) { module->Value().Rotate( centre, rotation ); module->Value().Move( translation ); } D_PAD* pad = module->Pads(); for( ; pad != NULL; pad = pad->Next() ) { if( !pad->IsSelected() && !force_all ) continue; // rotate about centre point, wxPoint newPos = pad->GetPosition(); RotatePoint( &newPos, centre, rotation ); // shift and update newPos += translation; pad->SetPosition( newPos ); pad->SetPos0( newPos ); // finally apply rotation to the pad itself pad->Rotate( newPos, rotation ); } EDA_ITEM* item = module->GraphicalItems(); for( ; item != NULL; item = item->Next() ) { if( !item->IsSelected() && !force_all ) continue; switch( item->Type() ) { case PCB_MODULE_TEXT_T: { TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( item ); text->Rotate( centre, rotation ); text->Move( translation ); break; } case PCB_MODULE_EDGE_T: { EDGE_MODULE* em = static_cast<EDGE_MODULE*>( item ); em->Rotate( centre, rotation ); em->Move( translation ); break; } default: ; } } ClearMarkItems( module ); }
/** Mirror marked items, refer to a Vertical axis at position offset * Note: because this function is used in global transform, * if force_all is true, all items will be mirrored */ void MirrorMarkedItems( MODULE* module, wxPoint offset, bool force_all ) { #define SETMIRROR( z ) (z) -= offset.x; (z) = -(z); (z) += offset.x; wxPoint tmp; wxSize tmpz; if( module == NULL ) return; if( module->Reference().IsSelected() || force_all ) module->Reference().Mirror( offset, false ); if( module->Value().IsSelected() || force_all ) module->Value().Mirror( offset, false ); for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() ) { // Skip pads not selected, i.e. not inside the block to mirror: if( !pad->IsSelected() && !force_all ) continue; tmp = pad->GetPosition(); SETMIRROR( tmp.x ); pad->SetPosition( tmp ); pad->SetX0( pad->GetPosition().x ); tmp = pad->GetOffset(); tmp.x = -tmp.x; pad->SetOffset( tmp ); tmpz = pad->GetDelta(); tmpz.x = -tmpz.x; pad->SetDelta( tmpz ); pad->SetOrientation( 1800 - pad->GetOrientation() ); } for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() ) { // Skip items not selected, i.e. not inside the block to mirror: if( !item->IsSelected() && !force_all ) continue; switch( item->Type() ) { case PCB_MODULE_EDGE_T: ((EDGE_MODULE*) item)->Mirror( offset, false ); break; case PCB_MODULE_TEXT_T: static_cast<TEXTE_MODULE*>( item )->Mirror( offset, false ); break; default: break; } } ClearMarkItems( module ); }
bool FOOTPRINT_EDIT_FRAME::HandleBlockEnd( wxDC* DC ) { int itemsCount = 0; bool nextcmd = false; MODULE* currentModule = GetBoard()->m_Modules; if( GetScreen()->m_BlockLocate.GetCount() ) { // Set the SELECTED flag of all preselected items, and clear preselect list ClearMarkItems( currentModule ); PICKED_ITEMS_LIST* list = &GetScreen()->m_BlockLocate.GetItems(); for( unsigned ii = 0, e = list->GetCount(); ii < e; ++ii ) { BOARD_ITEM* item = (BOARD_ITEM*) list->GetPickedItem( ii ); item->SetFlags( SELECTED ); ++itemsCount; } GetScreen()->m_BlockLocate.ClearItemsList(); } switch( GetScreen()->m_BlockLocate.GetCommand() ) { case BLOCK_IDLE: DisplayError( this, wxT( "Error in HandleBlockPLace" ) ); break; case BLOCK_DRAG: // Drag case BLOCK_DRAG_ITEM: // Drag a given item (not used here) case BLOCK_MOVE: // Move case BLOCK_COPY: // Copy case BLOCK_COPY_AND_INCREMENT: // Specific to duplicate with increment command // Find selected items if we didn't already set them manually if( itemsCount == 0 ) itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) { nextcmd = true; if( m_canvas->IsMouseCaptured() ) { m_canvas->CallMouseCapture( DC, wxDefaultPosition, false ); m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines ); m_canvas->CallMouseCapture( DC, wxDefaultPosition, false ); } GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE ); m_canvas->Refresh( true ); } break; case BLOCK_MOVE_EXACT: itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) { wxPoint translation; double rotation = 0; DIALOG_MOVE_EXACT dialog( this, translation, rotation ); int ret = dialog.ShowModal(); if( ret == wxID_OK ) { SaveCopyInUndoList( currentModule, UR_MODEDIT ); const wxPoint blockCentre = GetScreen()->m_BlockLocate.Centre(); MoveMarkedItemsExactly( currentModule, blockCentre, translation, rotation ); } } break; case BLOCK_PRESELECT_MOVE: // Move with preselection list nextcmd = true; m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines ); GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE ); break; case BLOCK_DELETE: // Delete itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); DeleteMarkedItems( currentModule ); break; case BLOCK_SAVE: // Save case BLOCK_PASTE: break; case BLOCK_ROTATE: itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); RotateMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() ); break; case BLOCK_MIRROR_X: case BLOCK_MIRROR_Y: case BLOCK_FLIP: // mirror itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate ); if( itemsCount ) SaveCopyInUndoList( currentModule, UR_MODEDIT ); MirrorMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() ); break; case BLOCK_ZOOM: // Window Zoom Window_Zoom( GetScreen()->m_BlockLocate ); break; case BLOCK_ABORT: break; case BLOCK_SELECT_ITEMS_ONLY: break; } if( !nextcmd ) { if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_SELECT_ITEMS_ONLY ) { ClearMarkItems( currentModule ); } GetScreen()->ClearBlockCommand(); SetCurItem( NULL ); m_canvas->EndMouseCapture( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString, false ); m_canvas->Refresh( true ); } return nextcmd; }