bool
nsColumnSetFrame::ReflowChildren(nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
bool aUnboundedLastColumn,
nsCollapsingMargin* aBottomMarginCarriedOut,
ColumnBalanceData& aColData)
{
aColData.Reset();
bool allFit = true;
bool RTL = GetStyleVisibility()->mDirection == NS_STYLE_DIRECTION_RTL;
bool shrinkingHeightOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceHeight > aConfig.mColMaxHeight;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceHeight=%d, mColMaxHeight=%d, RTL=%d\n, mBalanceColCount=%d, mColWidth=%d, mColGap=%d\n",
mLastBalanceHeight, aConfig.mColMaxHeight, RTL, aConfig.mBalanceColCount,
aConfig.mColWidth, aConfig.mColGap);
#endif
DrainOverflowColumns();
if (mLastBalanceHeight != aConfig.mColMaxHeight) {
mLastBalanceHeight = aConfig.mColMaxHeight;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
const nsMargin &borderPadding = aReflowState.mComputedBorderPadding;
nsRect contentRect(0, 0, 0, 0);
nsOverflowAreas overflowRects;
nsIFrame* child = mFrames.FirstChild();
nsPoint childOrigin = nsPoint(borderPadding.left, borderPadding.top);
// For RTL, figure out where the last column's left edge should be. Since the
// columns might not fill the frame exactly, we need to account for the
// slop. Otherwise we'll waste time moving the columns by some tiny
// amount unnecessarily.
nscoord targetX = borderPadding.left;
if (RTL) {
nscoord availWidth = aReflowState.availableWidth;
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
availWidth = aReflowState.ComputedWidth();
}
if (availWidth != NS_INTRINSICSIZE) {
childOrigin.x += availWidth - aConfig.mColWidth;
targetX += aConfig.mExpectedWidthLeftOver;
#ifdef DEBUG_roc
printf("*** childOrigin.x = %d\n", childOrigin.x);
#endif
}
}
int columnCount = 0;
int contentBottom = 0;
bool reflowNext = false;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
bool skipIncremental = !aReflowState.ShouldReflowAllKids()
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
// We want scrollable overflow here since this is a calculation that
// affects layout.
bool skipResizeHeightShrink = shrinkingHeightOnly
&& child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxHeight;
nscoord childContentBottom = 0;
if (!reflowNext && (skipIncremental || skipResizeHeightShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(this, child, childOrigin);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBottom = nsLayoutUtils::CalculateContentBottom(child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize height shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeHeightShrink, aStatus);
#endif
} else {
nsSize availSize(aConfig.mColWidth, aConfig.mColMaxHeight);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
availSize.height = GetAvailableContentHeight(aReflowState);
}
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
nsHTMLReflowState kidReflowState(PresContext(), aReflowState, child,
availSize, availSize.width,
aReflowState.ComputedHeight());
kidReflowState.mFlags.mIsTopOfPage = PR_TRUE;
kidReflowState.mFlags.mTableIsSplittable = PR_FALSE;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.height);
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowState.mFlags.mNextInFlowUntouched = PR_TRUE;
}
nsHTMLReflowMetrics kidDesiredSize(aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowState,
childOrigin.x + kidReflowState.mComputedMargin.left,
childOrigin.y + kidReflowState.mComputedMargin.top,
0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.width, kidDesiredSize.height);
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aBottomMarginCarriedOut = kidDesiredSize.mCarriedOutBottomMargin;
FinishReflowChild(child, PresContext(), &kidReflowState,
kidDesiredSize, childOrigin.x, childOrigin.y, 0);
childContentBottom = nsLayoutUtils::CalculateContentBottom(child);
if (childContentBottom > aConfig.mColMaxHeight) {
allFit = PR_FALSE;
}
if (childContentBottom > availSize.height) {
aColData.mMaxOverflowingHeight = NS_MAX(childContentBottom,
aColData.mMaxOverflowingHeight);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRects, child);
contentBottom = NS_MAX(contentBottom, childContentBottom);
aColData.mLastHeight = childContentBottom;
aColData.mSumHeight += childContentBottom;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
child = nsnull;
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
nsresult rv = CreateNextInFlow(PresContext(), child, kidNextInFlow);
if (NS_FAILED(rv)) {
NS_NOTREACHED("Couldn't create continuation");
child = nsnull;
break;
}
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = PR_TRUE;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = PR_TRUE;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
if (continuationColumns.NotEmpty()) {
SetOverflowFrames(PresContext(), continuationColumns);
}
child = nsnull;
break;
}
}
if (PresContext()->HasPendingInterrupt()) {
// Stop the loop now while |child| still points to the frame that bailed
// out. We could keep going here and condition a bunch of the code in
// this loop on whether there's an interrupt, or even just keep going and
// trying to reflow the blocks (even though we know they'll interrupt
// right after their first line), but stopping now is conceptually the
// simplest (and probably fastest) thing.
break;
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
if (!RTL) {
childOrigin.x += aConfig.mColWidth + aConfig.mColGap;
} else {
childOrigin.x -= aConfig.mColWidth + aConfig.mColGap;
}
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.x = %d\n", childOrigin.x);
#endif
}
}
if (PresContext()->CheckForInterrupt(this) &&
(GetStateBits() & NS_FRAME_IS_DIRTY)) {
// Mark all our kids starting with |child| dirty
// Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
// because we might have interrupted while reflowing |child|, and since
// we're about to add a dirty bit to |child| we need to make sure that
// |this| is scheduled to have dirty bits marked on it and its ancestors.
// Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
// bail out immediately, since it'll already have a dirty bit.
for (; child; child = child->GetNextSibling()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
// If we're doing RTL, we need to make sure our last column is at the left-hand side of the frame.
if (RTL && childOrigin.x != targetX) {
overflowRects.Clear();
contentRect = nsRect(0, 0, 0, 0);
PRInt32 deltaX = targetX - childOrigin.x;
#ifdef DEBUG_roc
printf("*** CHILDORIGIN.x = %d, targetX = %d, DELTAX = %d\n", childOrigin.x, targetX, deltaX);
#endif
for (child = mFrames.FirstChild(); child; child = child->GetNextSibling()) {
MoveChildTo(this, child, child->GetPosition() + nsPoint(deltaX, 0));
ConsiderChildOverflow(overflowRects, child);
contentRect.UnionRect(contentRect, child->GetRect());
}
}
aColData.mMaxHeight = contentBottom;
contentRect.height = NS_MAX(contentRect.height, contentBottom);
mLastFrameStatus = aStatus;
// contentRect included the borderPadding.left,borderPadding.top of the child rects
contentRect -= nsPoint(borderPadding.left, borderPadding.top);
nsSize contentSize = nsSize(contentRect.XMost(), contentRect.YMost());
// Apply computed and min/max values
if (aReflowState.ComputedHeight() != NS_INTRINSICSIZE) {
contentSize.height = aReflowState.ComputedHeight();
} else {
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMaxHeight) {
contentSize.height = NS_MIN(aReflowState.mComputedMaxHeight, contentSize.height);
}
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMinHeight) {
contentSize.height = NS_MAX(aReflowState.mComputedMinHeight, contentSize.height);
}
}
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
contentSize.width = aReflowState.ComputedWidth();
} else {
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMaxWidth) {
contentSize.width = NS_MIN(aReflowState.mComputedMaxWidth, contentSize.width);
}
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMinWidth) {
contentSize.width = NS_MAX(aReflowState.mComputedMinWidth, contentSize.width);
}
}
aDesiredSize.height = borderPadding.top + contentSize.height +
borderPadding.bottom;
aDesiredSize.width = contentSize.width + borderPadding.left + borderPadding.right;
aDesiredSize.mOverflowAreas = overflowRects;
aDesiredSize.UnionOverflowAreasWithDesiredBounds();
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
NS_IMETHODIMP
nsFirstLetterFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aMetrics,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aReflowStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aMetrics, aReflowStatus);
nsresult rv = NS_OK;
// Grab overflow list
DrainOverflowFrames(aPresContext);
nsIFrame* kid = mFrames.FirstChild();
// Setup reflow state for our child
nsSize availSize(aReflowState.availableWidth, aReflowState.availableHeight);
const nsMargin& bp = aReflowState.mComputedBorderPadding;
nscoord lr = bp.left + bp.right;
nscoord tb = bp.top + bp.bottom;
NS_ASSERTION(availSize.width != NS_UNCONSTRAINEDSIZE,
"should no longer use unconstrained widths");
availSize.width -= lr;
if (NS_UNCONSTRAINEDSIZE != availSize.height) {
availSize.height -= tb;
}
// Reflow the child
if (!aReflowState.mLineLayout) {
// When there is no lineLayout provided, we provide our own. The
// only time that the first-letter-frame is not reflowing in a
// line context is when its floating.
nsHTMLReflowState rs(aPresContext, aReflowState, kid, availSize);
nsLineLayout ll(aPresContext, nsnull, &aReflowState, nsnull);
ll.BeginLineReflow(bp.left, bp.top, availSize.width, NS_UNCONSTRAINEDSIZE,
PR_FALSE, PR_TRUE);
rs.mLineLayout = ≪
ll.SetFirstLetterStyleOK(PR_TRUE);
kid->WillReflow(aPresContext);
kid->Reflow(aPresContext, aMetrics, rs, aReflowStatus);
ll.EndLineReflow();
}
else {
// Pretend we are a span and reflow the child frame
nsLineLayout* ll = aReflowState.mLineLayout;
PRBool pushedFrame;
NS_ASSERTION(ll->GetFirstLetterStyleOK() || GetPrevInFlow(),
"First-in-flow first-letter should have first-letter style enabled in nsLineLayout!");
ll->BeginSpan(this, &aReflowState, bp.left, availSize.width);
ll->ReflowFrame(kid, aReflowStatus, &aMetrics, pushedFrame);
ll->EndSpan(this);
}
// Place and size the child and update the output metrics
kid->SetRect(nsRect(bp.left, bp.top, aMetrics.width, aMetrics.height));
kid->FinishAndStoreOverflow(&aMetrics);
kid->DidReflow(aPresContext, nsnull, NS_FRAME_REFLOW_FINISHED);
aMetrics.width += lr;
aMetrics.height += tb;
aMetrics.ascent += bp.top;
mBaseline = aMetrics.ascent;
// Ensure that the overflow rect contains the child textframe's overflow rect.
// Note that if this is floating, the overline/underline drawable area is in
// the overflow rect of the child textframe.
aMetrics.mOverflowArea.UnionRect(aMetrics.mOverflowArea,
nsRect(0, 0, aMetrics.width, aMetrics.height));
ConsiderChildOverflow(aMetrics.mOverflowArea, kid);
// Create a continuation or remove existing continuations based on
// the reflow completion status.
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
if (aReflowState.mLineLayout) {
aReflowState.mLineLayout->SetFirstLetterStyleOK(PR_FALSE);
}
nsIFrame* kidNextInFlow = kid->GetNextInFlow();
if (kidNextInFlow) {
// Remove all of the childs next-in-flows
static_cast<nsContainerFrame*>(kidNextInFlow->GetParent())
->DeleteNextInFlowChild(aPresContext, kidNextInFlow);
}
}
else {
// Create a continuation for the child frame if it doesn't already
// have one.
nsIFrame* nextInFlow;
rv = CreateNextInFlow(aPresContext, this, kid, nextInFlow);
if (NS_FAILED(rv)) {
return rv;
}
// And then push it to our overflow list
if (nextInFlow) {
kid->SetNextSibling(nsnull);
SetOverflowFrames(aPresContext, nextInFlow);
}
else {
nsIFrame* nextSib = kid->GetNextSibling();
if (nextSib) {
kid->SetNextSibling(nsnull);
SetOverflowFrames(aPresContext, nextSib);
}
}
}
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowState, aMetrics);
return rv;
}
nsresult
nsInlineFrame::ReflowInlineFrame(nsPresContext* aPresContext,
const nsHTMLReflowState& aReflowState,
InlineReflowState& irs,
nsIFrame* aFrame,
nsReflowStatus& aStatus)
{
nsLineLayout* lineLayout = aReflowState.mLineLayout;
PRBool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
PRBool pushedFrame;
nsresult rv =
lineLayout->ReflowFrame(aFrame, aStatus, nsnull, pushedFrame);
if (NS_FAILED(rv)) {
return rv;
}
if (NS_INLINE_IS_BREAK(aStatus)) {
if (NS_INLINE_IS_BREAK_BEFORE(aStatus)) {
if (aFrame != mFrames.FirstChild()) {
// Change break-before status into break-after since we have
// already placed at least one child frame. This preserves the
// break-type so that it can be propagated upward.
aStatus = NS_FRAME_NOT_COMPLETE |
NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER |
(aStatus & NS_INLINE_BREAK_TYPE_MASK);
PushFrames(aPresContext, aFrame, irs.mPrevFrame);
}
else {
// Preserve reflow status when breaking-before our first child
// and propagate it upward without modification.
// Note: if we're lazily setting the frame pointer for our child
// frames, then we need to set it now. Don't return and leave the
// remaining child frames in our child list with the wrong parent
// frame pointer...
if (irs.mSetParentPointer) {
if (irs.mLineContainer && irs.mLineContainer->GetPrevContinuation()) {
ReparentFloatsForInlineChild(irs.mLineContainer, aFrame->GetNextSibling(),
PR_TRUE);
}
for (nsIFrame* f = aFrame->GetNextSibling(); f; f = f->GetNextSibling()) {
f->SetParent(this);
}
}
}
}
else {
// Break-after
if (NS_FRAME_IS_NOT_COMPLETE(aStatus)) {
nsIFrame* newFrame;
rv = CreateNextInFlow(aPresContext, this, aFrame, newFrame);
if (NS_FAILED(rv)) {
return rv;
}
}
nsIFrame* nextFrame = aFrame->GetNextSibling();
if (nextFrame) {
NS_FRAME_SET_INCOMPLETE(aStatus);
PushFrames(aPresContext, nextFrame, aFrame);
}
else if (nsnull != GetNextInFlow()) {
// We must return an incomplete status if there are more child
// frames remaining in a next-in-flow that follows this frame.
nsInlineFrame* nextInFlow = (nsInlineFrame*) GetNextInFlow();
while (nsnull != nextInFlow) {
if (nextInFlow->mFrames.NotEmpty()) {
NS_FRAME_SET_INCOMPLETE(aStatus);
break;
}
nextInFlow = (nsInlineFrame*) nextInFlow->GetNextInFlow();
}
}
}
}
else if (NS_FRAME_IS_NOT_COMPLETE(aStatus)) {
if (nsGkAtoms::placeholderFrame == aFrame->GetType()) {
nsBlockReflowState* blockRS = lineLayout->mBlockRS;
blockRS->mBlock->SplitPlaceholder(*blockRS, aFrame);
// Allow the parent to continue reflowing
aStatus = NS_FRAME_COMPLETE;
}
else {
nsIFrame* newFrame;
rv = CreateNextInFlow(aPresContext, this, aFrame, newFrame);
if (NS_FAILED(rv)) {
return rv;
}
if (!reflowingFirstLetter) {
nsIFrame* nextFrame = aFrame->GetNextSibling();
if (nextFrame) {
PushFrames(aPresContext, nextFrame, aFrame);
}
}
}
}
return rv;
}
