int main( void )
{
I16 card = -1, card_number = 0;
U32 input, out_value = 0;
if((card = Register_Card(PCI_7248, card_number))<0) {
printf ("Can't open device file: PCI7248\n");
exit(-1);
}
printf("open device file successfully!!\n");
DIO_PortConfig(card,Channel_P1A, INPUT_PORT);
DIO_PortConfig(card,Channel_P2A, OUTPUT_PORT);
DIO_PortConfig(card,Channel_P1B, INPUT_PORT);
DIO_PortConfig(card,Channel_P2B, OUTPUT_PORT);
DIO_PortConfig(card,Channel_P1C, INPUT_PORT);
DIO_PortConfig(card,Channel_P2C, OUTPUT_PORT);
clrscr();
printf("PCI-7248 DIO Sample :\n\n");
printf("-------------------------------------------------\n");
printf(" P1A, p1B, P1C are configured as input port.\n");
printf(" P2A, p2B, P2C are configured as output port.\n");
printf("-------------------------------------------------\n");
printf(" Press any key to continue...\n");
getch();
do {
clrscr();
printf ("PCI-7248 DIO Sample :\n\n");
printf ("-------------------------------------------------\n");
printf (" P1A, p1B, P1C are configured as input port.\n");
printf (" P2A, p2B, P2C are configured as output port.\n\n");
DO_WritePort(card, Channel_P2A, out_value);
printf(" P2A output = 0x%x\n", (U16)out_value);
DI_ReadPort(card, Channel_P1A, &input);
printf(" P1A input = 0x%x\n", (U16)input);
DO_WritePort(card, Channel_P2B, out_value);
printf(" P2B output = 0x%x\n", (U16)out_value);
DI_ReadPort(card, Channel_P1B, &input);
printf(" P1B input = 0x%x\n", (U16)input);
DO_WritePort(card, Channel_P2C, out_value);
printf(" P2C output = 0x%x\n", (U16)out_value);
DI_ReadPort(card, Channel_P1C, &input);
printf(" P1C input = 0x%x\n", (U16)input);
printf ("-------------------------------------------------\n");
printf (" Press ENTER to stop...\n");
//usleep(100000);
out_value = (out_value+1)%256;
} while(!kbhit());
if(card>=0) {
Release_Card(card);
}
return 0;
}
int main(void)
{
int err;
char temp_char;
setbuf( stdout, NULL );
printf("PCI-7396 Interrupt Sample (INT1)\n" );
printf("This program shows the number of occurrence\n");
printf("of COS INT1 interupt. COS INT1 interrupt is\n");
printf("generated by external signal from DI Port 1.\n");
printf("If you connect CN1 to CN2, press any key can generate an interrupt.\n");
printf("Or press ESC for exit\n\n" );
int_count=0;
if ((card=Register_Card(PCI_7396, card_number)) < 0) {
printf("Register_Card Error = %d\n", card);
exit(0);
}
if( DIO_PortConfig(card,Channel_P1, INPUT_PORT) != NoError )
goto exit_after_error;
if( DIO_PortConfig(card,Channel_P2, OUTPUT_PORT) != NoError )
goto exit_after_error;
//DIO_SetCOSInterrupt(card, Channel_P1, 1, 1, 1);
err = DIO_SetDualInterrupt(card, INT1_FP1C0, INT2_DISABLE, sig1_handler, NULL);
if( err != NoError ){
printf(" error from DIO_SetDualInterrupt : %d \n" , err );
goto exit_after_error;
}
while(1){
temp_char = getch();
if( temp_char == 0x1b )
break;
DO_WritePort(card,Channel_P2C, 0x1);
usleep(1000);
DO_WritePort(card,Channel_P2C, 0x0);
usleep(1000);
}
DIO_SetDualInterrupt(card, INT1_DISABLE, INT2_DISABLE, NULL, NULL);
exit_after_error:
if (card >= 0)
Release_Card(card);
exit(0);
}
int main( void )
{
I16 card=-1, card_number = 0;
U32 input = 0;
if ((card=Register_Card(PCI_7433, card_number)) < 0) {
printf ("Can't open device file: PCI7433\n");
exit(-1);
}
printf ("open device file successfully!!\n");
do {
clrscr();
printf ("PCI-7433R DIO Sample :\n\n");
printf ("The Data from DI are shown in the following table:\n");
printf ("--------------------------------------------------\n");
DI_ReadPort(card, PORT_DI_LOW, &input);
printf(" DI low port input = 0x%lx\n", input);
DI_ReadPort(card, PORT_DI_HIGH, &input);
printf(" DI high port input = 0x%lx\n", input);
DO_WritePort(card, P7433R_DO_LED, input);
printf(" LED output = 0x%lx\n", (input));
printf ("--------------------------------------------------\n");
printf (" Press Enter to stop...\n");
//usleep(100000);
}while( !kbhit() );
if(card>=0) {
Release_Card(card);
}
return 0;
}
int main(void)
{
I16 card = -1, card_number = 0;
U32 out_value = 1;
if((card = Register_Card(PCI_7234, card_number))<0){
printf("Can't open device file: PCI7234\n");
exit(-1);
}
printf("open device file successfully!!\n");
do{
clrscr();
printf("PCI-7234 DO Sample :\n");
printf("\nThe Data to DO are shown in the following table:\n\n");
printf("-------------------------------------------------\n");
DO_WritePort(card, 0, out_value);
printf(" Do port output = 0x%lx\n", (out_value));
printf("-------------------------------------------------\n");
printf(" Press Enter to stop...\n");
//usleep(100000);
out_value = (out_value*2)%((1<<31)+1);
if(!out_value)
out_value = 1;
}while(!kbhit());
if(card>=0){
Release_Card(card);
}
return 0;
}
int main( void )
{
I16 card = -1, card_number = 0;
U32 input, out_value = 0;
if((card = Register_Card(PCI_6208V, card_number))<0){
printf("Can't open device file: PCI6208V\n");
exit(-1);
}
do{
clrscr();
printf("PCI-6208V DIO Sample :\n");
printf("\nThe Data to/from DO/DI are shown in the following table:\n");
printf("--------------------------------------------------------\n");
DO_WritePort(card, 0, out_value);
printf(" DO port output = 0x%x\n", (U16)(out_value&0x0f));
usleep(100);
DI_ReadPort(card, 0, &input);
printf(" DI port input = 0x%x\n", (U16)(input&0x0f));
printf("--------------------------------------------------------\n");
//if(stop_flag) break;
printf(" Press Enter to stop...\n");
//usleep(100000);
out_value = (out_value+1)%16;
}while(!kbhit());
if(card>=0){
Release_Card(card);
}
return 0;
}
int main( void )
{
I16 card;
U32 input=0, output_value=0;
if ((card=Register_Card (PCI_9111DG, 0)) <0 ) {
printf("Register_Card error=%d", card);
exit(1);
}
printf("\n Press Enter for Exit \n");
do{
clrscr();
printf("*****************************************************************\n" );
printf(" PCI9111 IO Polling \n");
printf("*****************************************************************\n\n");
printf(" \n\n\n\n");
DO_WritePort(card,0, output_value);
printf(" Value write to OUTPUT PORT : %02x \n\n", (U16)output_value);
DI_ReadPort(card,0,&input);
printf(" Value read from INPUT PORT : %02x \n\n\n\n\n\n\n", (U16)input );
printf(" press Enter to stop \n\n\n");
usleep( 10000 );
if( output_value == 0xff )
output_value = 0;
else
output_value ++;
}while( !kbhit() );
Release_Card( card );
return 0;
}
int main(void)
{
int err;
char temp_char;
int card_number = 0;
setbuf(stdout, NULL);
printf(" Please input the Card Index: ");
scanf(" %d", &card_number);
system("clear");
printf("PCI-7258 Interrupt Sample (INT1)\n\n");
printf("This program shows the number of occurrence of INT1 interupt.\n");
printf("INT1 interrupt is generated by external signal from DI bit-0/bit-1.\n");
printf("Press ESC for exit\n\n");
int_count = 0;
if((card = Register_Card(PCI_7258, (I16)card_number))<0){
printf ("Can't open device file: PCI7258\n");
exit(-1);
}
DO_WritePort(card,0, out_Val);
err = DIO_SetDualInterrupt(card, INT1_EXT_SIGNAL, INT2_DISABLE, sig1_handler, NULL );
if(err!=NoError){
printf(" error from DIO_SetDualInterrupt : %d \n" , err );
goto exit_after_error;
}
while(1){
temp_char = getch();
if(temp_char==0x1b)
break;
DO_WritePort(card, 0, 0x0);
sleep(0);
DO_WritePort(card, 0, 0x1);
}
DIO_SetDualInterrupt(card, INT1_DISABLE, INT2_DISABLE, NULL, NULL);
DO_WritePort(card, 0, 0x0);
exit_after_error:
if(card>=0)
Release_Card(card);
exit(0);
}
int main(void)
{
int err;
char temp_char;
setbuf( stdout, NULL );
printf("PCI-7432 Dual Interrupt Sample\n" );
printf("This program shows the number of occurrence of interrupt\n" );
printf("for Dual interrupt lines.\n" );
printf("INT1 interrupt is generated by external signal from DI bit-0.\n");
printf("INT2 interrupt is generated by external signal from DI bit-1.\n");
printf("If you connect DO bit-0 to DI bit-0 and DO bit-1 to DI bit-1,\n");
printf("press any key can generate two interrupts.\n");
printf("One for INT1 and the other for INT2.\n");
printf("Or press ESC for exit\n\n" );
int_count = int2_count=0;
if ((card=Register_Card(PCI_7432, card_number)) < 0) {
printf("Register_Card Error = %d\n", card);
exit(0);
}
err = DIO_SetDualInterrupt(card, INT1_EXT_SIGNAL, INT2_EXT_SIGNAL, sig1_handler, sig2_handler);
if( err != NoError ){
printf(" error from DIO_SetDualInterrupt : %d \n" , err );
goto exit_after_error;
}
while(1){
temp_char = getch();
if( temp_char == 0x1b )
break;
DO_WritePort(card,0, 0x3);
usleep(1000);
DO_WritePort(card,0, 0x0);
}
DIO_SetDualInterrupt(card, INT1_DISABLE, INT2_DISABLE, NULL, NULL);
exit_after_error:
if (card >= 0)
Release_Card(card);
exit(0);
}
int main( void )
{
I16 card = -1, card_number = 0, i;
U32 input = 0, out_value = 1;
if((card = Register_Card(PCI_7250, card_number))<0){
printf("Can't open device file: PCI7250\n");
exit(-1);
}
printf("open device file successfully!!\n");
do{
clrscr();
printf("PCI-7250 DIO Sample :\n");
printf("\nThe Data to/from DO/DI are shown in the following table:\n");
printf("--------------------------------------------------------\n");
printf(" PCI-7250 : ");
DO_WritePort(card, 0, out_value);
printf("Do port output = 0x%x\n", (U16)out_value);
DI_ReadPort(card, 0, &input);
printf(" DI port input = 0x%x\n", (U16)input);
for(i=1; i<4; i++){
printf(" PCI-7251#%d : ", i);
if(DO_WritePort(card, 0, out_value)==NoError){
printf("\nDo port output = 0x%x\n", (U16)out_value);
DI_ReadPort(card, 0, &input);
printf("\n DI port input = 0x%x\n", (U16)input);
}
else
printf("None\n");
}
printf("--------------------------------------------------------\n");
printf(" Press Enter to stop...\n");
//usleep(200000);
out_value = (out_value<<1)%256;
if(!out_value)
out_value = 1;
}while(!kbhit());
if(card>=0){
DO_WritePort(card, 0, 0);
Release_Card(card);
}
return 0;
}
void main(void)
{
I16 card, err, card_num=0;
U16 in_value, out_value = 0;
printf("This program output data from TTL0 to TTL1.\n");
printf("Please input a card number: ");
scanf(" %hd", &card_num);
if ((card = Register_Card(PCI_7444, card_num)) <0 ) {
printf("Register_Card error=%d", card);
exit(1);
}
err = DIO_PortConfig(card, P7444_TTL0, OUTPUT_PORT);
if(err!=NoError) {
printf("Input Port Config Error: %d\n",err);
exit(1);
}
err = DIO_PortConfig(card, P7444_TTL1, INPUT_PORT);
if(err!=NoError) {
printf("Output Port Config Error: %d\n",err);
exit(1);
}
do{
clrscr();
printf ("-------------------------------------------------\n");
err = DO_WritePort(card, P7444_TTL0, out_value);
if (err!=NoError) {
printf("DO_WritePort error=%d", err);
exit(1);
}
printf(" TTL0 output = 0x%x\n", out_value);
err = DI_ReadPort(card, P7444_TTL1, &in_value);
if (err!=NoError) {
printf("DI_ReadPort error=%d", err);
exit(1);
}
printf(" TTL1 input = 0x%x\n", in_value);
printf ("-------------------------------------------------\n");
printf ("\n Press Enter to stop...\n");
usleep(200000);
if(out_value < 0xffff)
out_value = (out_value + 1);
else
out_value = 0;
} while(!kbhit());
Release_Card(card);
}
void sig_handler2(int signo)
{
if(int2_count<total_count){
DO_WritePort(card,Channel_P3A, buffer[int2_count]);
DI_ReadPort(card,Channel_P1A,&in_buffer[int2_count]);
int2_count++;
//generate INT1 interrupt signal
DO_WritePort(card,Channel_P3C,1);
DO_WritePort(card,Channel_P3C,0);
}
else if(int2_count==total_count){
// reset the Timer to stop generate INT2
CTR_Setup(card, 1, RATE_GENERATOR, 0, BIN);
CTR_Setup(card, 2, RATE_GENERATOR, 0, BIN);
printf("\n\n INT1 Count:%d INT2 Count:%d \n\n\n", int_count, int2_count);
printf(" press ENTER for display data \n" ); // this will be catched by getchar() in main()
int2_count++;
}
return;
}
int main(int argc, char **argv)
{
I16 card, err;
U16 card_num;
U32 DO_Write = 0xffff;
U32 DO_Read, DI_Read;
printf("This sample write digital data to DO port and read digital value from DI port.\n");
printf("Card Number? ");
scanf(" %hd", &card_num);
card = Register_Card(PCI_9223, card_num);
if(card<0){
printf("Register_Card Error: %d\n", card);
exit(1);
}
do{
/*Write DO port*/
err = DO_WritePort(card, 0, DO_Write);
if(err<0){
printf("DO_WritePort Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Read the written data from DO port*/
err = DO_ReadPort(card, 0, &DO_Read);
if(err<0){
printf("DO_ReadPort Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Read DI Port*/
err = DI_ReadPort(card, 0, &DI_Read);
if(err<0){
printf("DI_ReadPort Error: %d\n", err);
Release_Card(card);
exit(1);
}
clrscr();
printf("/*--------------------------------*/\n");
printf(" DO Read Data : %#x\n", DO_Read);
printf(" DI Read Data : %#x\n", DI_Read);
printf("\n\tPress Enter to exit...\n");
printf("/*--------------------------------*/\n");
DO_Write = (DO_Write==0)? 0xffff: (DO_Write-1);
usleep(100000);
}while(!kbhit());
Release_Card(card);
return 0;
}
int main(void)
{
I16 err;
int card_number = 0;
U32 input = 0, out_value = 1, pattern = 0;
F32 rt = 0.0;
printf(" Please input the Card_Index for PCI7260 :");
scanf(" %d", &card_number ); getchar();
if((card = Register_Card(PCI_7260, (I16)card_number))<0){
printf ("Can't open device file: PCI7260 %d\n", card);
exit(-1);
}
printf("open device file successfully!!\n");
err = IdentifyLED_Control (card, 1);
GetInitPattern(card, INIT_PTN, &pattern);
printf("Init Pattern: %x\n", pattern);
DO_WritePort(card, 0, pattern);
GetInitPattern(card, EMGSHDN_PTN, &pattern);
printf("EMG Shutdown Pattern: %x\n", pattern);
err = WDT_Setup(card, 0, 5.0, &rt, wdt_sig_handler);
if(err!=NoError){
printf("WDT_Setup err %d!", err);
Release_Card(card);
exit(1);
}
err = WDT_Control(card, 0, WDT_ARM);
if(err!=NoError){
printf("WDT_Control err %d!", err);
Release_Card(card);
exit(1);
}
printf("\nWDT will overflow after %.4f seconds ...\n", rt);
getch();
WDT_Control(card, 0, WDT_DISARM);
IdentifyLED_Control(card, 0);
if(card>=0){
Release_Card(card);
}
return 0;
}
int main(void)
{
I16 card = -1, err;
int card_number = 0;
U32 input = 0, out_value = 0x80000000;
printf(" Please input the Card_Index for PCI7258 :");
scanf(" %d", &card_number); getchar();
if((card = Register_Card(PCI_7258, (I16)card_number))<0){
printf ("Can't open device file: PCI7258 %d\n", card);
exit(-1);
}
printf("open device file successfully!!\n");
do{
clrscr();
if(out_value==0x80000000)
out_value = 1L;
printf("PCI-7258 DIO Sample :\n");
printf("\nThe Data to/from DO/DI are shown in the following table:\n");
printf("--------------------------------------------------------\n");
err = DO_WritePort(card, 0, out_value & 0x0FFFF);
err = DO_WritePort(card, 1, (out_value >> 16 ) & 0x0FFFF);
//printf(" Do port output = 0x%x\n", (U16)out_value);
printf(" Do port output = 0x%08lx err=%d\n", (U32)out_value, err);
usleep(5000);
err = DI_ReadPort(card, 0, &input);
//printf(" DI port input = 0x%x\n", (U16)input);
printf(" DI port input = 0x%x err=%d\n", (U16)input, err);
printf("--------------------------------------------------------\n");
printf(" Press Enter to stop...\n");
//usleep(200000);
out_value = out_value<<1;
}while(!kbhit());
if(card>=0){
Release_Card(card);
}
return 0;
}
int main(void)
{
I16 card = -1, err;
int card_number = 0;
U32 input = 0, out_value = 1, pattern=0;
printf(" Please input the Card_Index for PCI7260 :");
scanf(" %d", &card_number); getchar();
if((card = Register_Card(PCI_7260, (I16)card_number))<0){
printf("Can't open device file: PCI7260 %d\n", card);
exit(-1);
}
printf("open device file successfully!!\n");
err = IdentifyLED_Control(card, 1);
GetInitPattern(card, INIT_PTN, &pattern);
printf("Init Pattern: %x\n", pattern);
GetInitPattern(card, EMGSHDN_PTN, &pattern);
printf("EMG Shutdown Pattern: %x\n", pattern);
do{
clrscr();
printf("PCI-7260 DIO Sample :\n");
printf("\nThe Data to/from DO/DI are shown in the following table:\n");
printf("--------------------------------------------------------\n");
err = DO_WritePort(card, 0, out_value);
printf(" Do port output = 0x%x err=%d\n", (U8)out_value, err);
usleep(10000);
err = DI_ReadPort(card, 0, &input);
printf(" DI port input = 0x%x err=%d\n", (U8)input, err);
printf("--------------------------------------------------------\n");
printf(" Press Enter to stop...\n");
usleep(200000);
out_value = /*(out_value + 1)*/(out_value*2)%256;
if(!out_value)
out_value = 1;
}while(!kbhit());
if(card>=0){
Release_Card(card);
}
return 0;
}
int main( void )
{
I16 card=-1, card_number = 0;
U32 input = 0, out_value = 1, i=0;
if ((card=Register_Card(PCI_7452, card_number)) < 0) {
printf ("Can't open device file: PCI7452\n");
exit(-1);
}
printf ("open device file successfully!!\n");
do {
clrscr();
printf ("PCI-7452 DIO Sample :\n\n");
printf ("The Data to/from DO/DI are shown in the following table:\n");
printf ("--------------------------------------------------------\n");
for(i=0; i<4; i++) {
DO_WritePort(card, i, out_value);
printf(" Do port%d output = 0x%lx\n", i, out_value);
usleep(100);
DI_ReadPort(card, i, &input);
printf(" DI port%d input = 0x%lx\n", i, input);
}
printf ("--------------------------------------------------------\n");
printf (" Press Enter to stop...\n");
usleep(100000);
out_value = (out_value * 2) % ((1<<31) + 1);
if(!out_value)
out_value = 1;
}while( !kbhit() );
if(card>=0) {
Release_Card(card);
}
return 0;
}
int main(int argc, char **argv)
{
I16 err;
U16 card_num=0;
//U32 vi;
U32 DIRead,DOWrite;
//BOOLEAN fStop;
U32 COSEventOutLen = 100; //100 system clock - 100 * 8 ns
printf("This sample performs change of state functionality.\n");
printf("DIO Port A is configured as a DO port while Port B\n");
printf("is configured as a DI Port. Signal will be asserted\n");
printf("and a %ld ns pulse will be generated to AFI0 while\n", 8*COSEventOutLen);
printf("the DI state is changed.\n");
printf("Card Number? ");
scanf(" %hd", &card_num);
int_count=0;
/*Open and Initialize Device*/
card = Register_Card(PCI_7350, card_num);
if(card<0){
printf("Register_Card Error: %d\n", card);
exit(1);
}
/*Configure 7350 DIO Port*/
err = DIO_PortConfig(card, P7350_DIO_A, OUTPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_A Error: %d\n", err);
Release_Card(card);
exit(1);
}
err = DIO_PortConfig(card, P7350_DIO_B, INPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_B Error: %d\n", err);
Release_Card(card);
exit(1);
}
DO_WritePort(card, P7350_DIO_A, 0);
//usleep(1000);
/*
* Setup COS for Port B
*/
//err = DIO_SetCOSInterrupt32(card, 0, 0xff00, &COS_Event/*, 0*/);
err = DIO_SetCOSInterrupt32(card, 0, 0xff00, sig_handler);
if(err<0){
printf("DIO_SetCOSInterrupt32 Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*
* Set COS event out to AFI port
*/
err = DIO_7350_AFIConfig(card, P7350_AFI_0, 1, P7350_AFI_COSTrigOut, COSEventOutLen);
if(err<0){
printf("DIO_7350_AFIConfig Port_A Error: %d\n", err);
Release_Card(card);
exit(1);
}
do{
/*
* DO output to Port A/C
*/
//printf("\nOutput Data?");
//scanf(" %lx", &vi);
usleep(500000);
clrscr();
printf("This sample performs change of state functionality.\n");
printf("DIO Port A is configured as a DO port while Port B\n");
printf("is configured as a DI Port. Signal will be asserted\n");
printf("and a %ld ns pulse will be generated to AFI0 while\n", 8*COSEventOutLen);
printf("the DI state is changed.\n\n\n");
if((out_Val)%4==0||(out_Val)%4==1){
DO_WritePort(card, P7350_DIO_A, 0/*vi&0xff*/);DOWrite=0;}
else{
DO_WritePort(card, P7350_DIO_A, 1/*vi&0xff*/);DOWrite=1;}
//out_Val = (out_Val+1)%2;
//DO_WritePort(card, P7350_DIO_A, out_Val/*vi&0xff*/);
usleep(1000);
//DO_WritePort(card, P7350_DIO_A, vi&0xff);
DI_ReadPort(card, P7350_DIO_B, &DIRead);
out_Val++;
printf("Write to Port A: 0x%lx; Read from Port B: 0x%lx;\n\n\n", DOWrite/*vi&0xff*/, DIRead);
//printf("Write to Port A: 0x%lx; Read from Port B: 0x%lx;\n", vi&0xff, DIRead);
printf("Press Enter to Quit......\n");
//fStop = getch();
}while(!kbhit()/*(fStop!='q')&&(fStop!='Q')*/);
err = DIO_SetCOSInterrupt32(card, 0, 0, NULL);
if(err<0){
printf("DIO_SetCOSInterrupt32 Error: %d\n", err);
}
err = DIO_7350_AFIConfig(card, P7350_AFI_0, 0, 0, 0);
if(err<0){
printf("DIO_7350_AFIConfig Error: %d\n", err);
}
//printf("Press any key to exit...\n\n");
//getch();
Release_Card(card);
return 0;
}
int main(int argc, char **argv)
{
I16 card, err;
U16 card_num;
U32 DI_Value0;
U32 DI_Value1;
U32 DO_Value = 0;
U32 DO_Read0;
U32 DO_Read1;
printf("This sample perform DIO with polling mode.\n");
printf("Port A/C are configured as DO ports\n");
printf("while port B/D are configured as DI ones.\n");
printf("You can connect port A-C, and B-D to test this sample.\n\n");
printf("Card Number? ");
scanf(" %hd", &card_num);
/*
* Open and Initialize Device
*/
card = Register_Card(PCI_7350, card_num);
if(card<0){
printf("Register_Card Error: %d\n", card);
exit(1);
}
/*
* Configure 7350 DIO Port Direction (Input or Output)
*/
err = DIO_PortConfig(card, P7350_DIO_A, OUTPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_A Error: %d\n", err);
Release_Card(card);
exit(1);
}
err = DIO_PortConfig(card, 1, INPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_B Error: %d\n", err);
Release_Card(card);
exit(1);
}
err = DIO_PortConfig(card, P7350_DIO_C, OUTPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_C Error: %d\n", err);
Release_Card(card);
exit(1);
}
err = DIO_PortConfig(card, P7350_DIO_D, INPUT_PORT);
if(err<0){
printf("DIO_PortConfig Port_D Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*
* Configure DIO Voltage Level
*/
err = DIO_VoltLevelConfig(card, P7350_PortDIO, VoltLevel_3R3);
if(err<0){
printf("DIO_7350_SetVoltLevel Error: %d\n", err);
Release_Card(card);
exit(1);
}
else
{
printf("DIO_7350_SetVoltLevel ok!");
}
/*
* Read/Write Control
*/
do{
clrscr();
/*Write Port A*/
err = DO_WritePort(card, P7350_DIO_A, DO_Value);
if(err<0){
printf("DO_WritePort Port A Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Write Port C*/
err = DO_WritePort(card, P7350_DIO_C, 255-DO_Value);
if(err<0){
printf("DO_WritePort Port C Error: %d\n", err);
Release_Card(card);
exit(1);
}
usleep(1000);
/*Read Port B*/
err = DI_ReadPort(card, P7350_DIO_B, &DI_Value0);
if(err<0){
printf("DI_ReadPort Port B Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Read Port D*/
err = DI_ReadPort(card, P7350_DIO_D, &DI_Value1);
if(err<0){
printf("DI_ReadPort Port D Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Read Back Port A*/
err = DO_ReadPort(card, P7350_DIO_A, &DO_Read0);
if(err<0){
printf("DO_ReadPort Port A Error: %d\n", err);
Release_Card(card);
exit(1);
}
/*Read Back Port C*/
err = DO_ReadPort(card, P7350_DIO_C, &DO_Read1);
if(err<0){
printf("DO_ReadPort Port C Error: %d\n", err);
Release_Card(card);
exit(1);
}
printf("-----------------------------------------\n");
printf(" DO Write Port Port A Port C\n");
printf(" DO Write Data 0x%lx 0x%lx\n\n", DO_Value, 255-DO_Value);
printf(" DO Read Port Port A Port C\n");
printf(" DO Read Data 0x%lx 0x%lx\n\n", DO_Read0, DO_Read1);
printf(" DI Read Port Port B Port D\n");
printf(" DI Read Data 0x%lx 0x%lx\n\n", DI_Value0, DI_Value1);
printf(" Press Enter to stop...\n");
printf("-----------------------------------------\n");
if(++DO_Value==256)
DO_Value = 0;
usleep(1000);
}while(!kbhit());
printf("Press any key to exit...\n");
getch();
Release_Card(card);
return 0;
}
void AU9525Tester::OnStartTest()
{
// TODO: Add your control notification handler code here
UpdateData(TRUE);
// m_strResult = "";
// m_strTestInformation = "";
UpdateData(FALSE);
// GetDlgItem(IDC_BUTTON_START)->EnableWindow(FALSE);
// SetTimer(ID_CLOCK,10000,NULL);
long t1; // test cycle
// EndLess contorl loop
CString StrOutput;
StrOutput="Ready";
CString ChipName,StrInput;
MSG msg;
COleVariant Buf;
do{
time(&t1); // get time
ChipName="";
//============================================
// Get ChipName
//============================================
do
{
m_Comm.SetOutput(COleVariant(StrOutput)); // Send Ready
Sleep(10);
Buf=m_Comm.GetInput(); // get chip name
ChipName=ChipName + (CString)(Buf.bstrVal);
// DoEvents
while( ::PeekMessage( &msg, NULL, 0, 0, PM_NOREMOVE ) )
{
::GetMessage( &msg, NULL, 0, 0 );
::TranslateMessage( &msg );
::DispatchMessage( &msg );
}
} while ((ChipName!="AU6710ASF22") && (AllenStop==0));
// m_SpeedError.SetBkColor(RGB(255,255,255)); // initail interface
// m_LedFail.SetBkColor(RGB(255,255,255));
m_UnknowDevice.SetBackColor(RGB(255,255,255));
m_Slot0.SetBackColor(RGB(255,255,255));
m_Slot1.SetBackColor(RGB(255,255,255));
m_TestResult.SetBackColor(RGB(255,255,255));
m_TestResult.SetWindowText("Wait for Testing"); // set label UI
// m_strResult = "";
// m_strTestInformation = "";
//
DO_WritePort(card, Channel_P1A, 0x0); // set power on
Sleep(2000);
StartTest();
// m_Infor.LineScroll(m_Infor.GetLineCount());
DO_WritePort(card, Channel_P1A, 0xFF);
while( ::PeekMessage( &msg, NULL, 0, 0, PM_NOREMOVE ) )
{
::GetMessage( &msg, NULL, 0, 0 );
::TranslateMessage( &msg );
::DispatchMessage( &msg );
}
} while (AllenStop==0);
}
