VOS_VOID GU_OamPortCloseProc(OM_PROT_HANDLE_ENUM_UINT32 enHandle, CPM_PHY_PORT_ENUM_UINT32 enPhyPort)
{
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseNum++;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseSlice = OM_GetSlice();
if (enPhyPort == CPM_QueryPhyPort(CPM_OM_COMM))
{
GU_OamDisconnectPorts(enPhyPort);
g_stAcpuPcToUeSucRecord.stRlsInfo.ulRlsPortClose++;
g_stAcpuPcToUeSucRecord.stRlsInfo.ulSlice = OM_GetSlice();
}
if (VOS_ERROR != g_astOMPortUDIHandle[enHandle])
{
DRV_UDI_CLOSE(g_astOMPortUDIHandle[enHandle]);
g_astOMPortUDIHandle[enHandle] = VOS_ERROR;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseOkNum++;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseOkSlice = OM_GetSlice();
}
return;
}
VOS_UINT32 DMS_UsbPortClose(DMS_PHY_BEAR_ENUM enPhyBear)
{
DMS_PHY_BEAR_PROPERTY_STRU *pstPhyBearProp = NULL;
VOS_INT32 lRet = ERR_MSP_SUCCESS;
DMS_LOG_INFO("DMS_UsbPortClose[%d]: Enter.\n", enPhyBear);
pstPhyBearProp = DMS_GetPhyBearProperty(enPhyBear);
if (UDI_INVALID_HANDLE == pstPhyBearProp->lPortHandle)
{
DMS_LOG_WARNING("DMS_UsbPortClose[%d]: Already close.\n", enPhyBear);
return ERR_MSP_SUCCESS;
}
DMS_DBG_SDM_FUN((DMS_SDM_MSG_ID_ENUM)(DMS_SDM_VCOM_CLOSE_BEGIN + (VOS_UINT32)enPhyBear),\
0, 0, 0);
lRet = DRV_UDI_CLOSE(pstPhyBearProp->lPortHandle);
if (lRet == ERR_MSP_SUCCESS)
{
DMS_LOG_INFO("DMS_UsbPortClose[%d]: Close success.\n", enPhyBear);
pstPhyBearProp->lPortHandle = UDI_INVALID_HANDLE;
pstPhyBearProp->ucChanStat = ACM_EVT_DEV_SUSPEND;
return (VOS_UINT32)lRet;
}
DMS_LOG_INFO("DMS_UsbPortClose[%d]: Close fail.\n", enPhyBear);
DMS_DBG_SDM_FUN((DMS_SDM_MSG_ID_ENUM)(DMS_SDM_VCOM_CLOSE_ERR_BEGIN + (VOS_UINT32)enPhyBear),\
(VOS_UINT32)lRet, 0, 0);
return ERR_MSP_FAILURE;
}
VOS_VOID PPM_PortCloseProc(OM_PROT_HANDLE_ENUM_UINT32 enHandle, CPM_PHY_PORT_ENUM_UINT32 enPhyPort)
{
VOS_ULONG ulLockLevel;
OM_LOGIC_CHANNEL_ENUM_UINT32 enChannel;
VOS_BOOL ulSndMsg;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseNum++;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseSlice = OM_GetSlice();
if (VOS_ERROR == g_astOMPortUDIHandle[enHandle])
{
return;
}
DRV_UDI_CLOSE(g_astOMPortUDIHandle[enHandle]);
g_astOMPortUDIHandle[enHandle] = VOS_ERROR;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseOkNum++;
g_stAcpuDebugInfo.astPortInfo[enHandle].ulUSBCloseOkSlice = OM_GetSlice();
VOS_SpinLockIntLock(&g_stPpmPortSwitchSpinLock, ulLockLevel);
ulSndMsg = VOS_FALSE;
enChannel = OM_LOGIC_CHANNEL_BUTT;
/* CFG端口处理GU和TL的端口断开，发消息到GU和TL去处理，但不断开CPM的关联 */
if (OM_USB_CFG_PORT_HANDLE == enHandle)
{
if (enPhyPort == CPM_QueryPhyPort(CPM_OM_CFG_COMM))
{
ulSndMsg = VOS_TRUE;
enChannel = OM_LOGIC_CHANNEL_CNF;
}
}
/* IND端口断开时发消息到GU和TL去处理，但不断开CPM的关联 */
else if (OM_USB_IND_PORT_HANDLE == enHandle)
{
if (enPhyPort == CPM_QueryPhyPort(CPM_OM_IND_COMM))
{
ulSndMsg = VOS_TRUE;
enChannel = OM_LOGIC_CHANNEL_IND;
}
}
else
{
}
VOS_SpinUnlockIntUnlock(&g_stPpmPortSwitchSpinLock, ulLockLevel);
if (VOS_TRUE == ulSndMsg)
{
PPM_DisconnectAllPort(enChannel);
}
return;
}
VOS_VOID CBTPPM_OamUsbCbtPortClose(VOS_VOID)
{
if (VOS_ERROR == g_ulCbtPortUDIHandle)
{
return;
}
DRV_UDI_CLOSE(g_ulCbtPortUDIHandle);
g_ulCbtPortUDIHandle = VOS_ERROR;
/* CBT端口从USB或VCOM切换到UART时接收函数指针为空，收到USB状态变更时不做断开处理 */
if (VOS_NULL_PTR == CBTCPM_GetRcvFunc())
{
return;
}
PPM_DisconnectGUPort(OM_LOGIC_CHANNEL_CBT);
return;
}
