void CEx_Ctrl::OnInitialUpdate()
{
CFormView::OnInitialUpdate();
// TODO: Add your specialized code here and/or call the base class
m_sp_pw.SetBuddy(&m_sel_pw);
m_sp_pw.SetRange(1, 10);
m_sp_pw.SetPos(1);
m_lists.ResetContent();
m_sel_graph.AddString(_T("0 - 选择模式"));
m_sel_graph.AddString(_T("1 - 直线"));
m_sel_graph.AddString(_T("2 - 矩形"));
m_sel_graph.AddString(_T("3 - 椭圆"));
m_sel_graph.AddString(_T("4 - 曲线"));
m_sel_graph.SetCurSel(0);
int i;
for (i = 0; i < 6; i++)
{
m_sel_ps.AddString(CGraphic::GetPenStyleById(i));
}
m_sel_ps.SetCurSel(0);
for (i = 0; i < 8; i++)
{
m_sel_bs.AddString(CGraphic::GetBrushStyleById(i));
}
m_sel_bs.SetCurSel(0);
DisplayRGB();
OnSelGraph();
}
//*******************************************************
// SETUP
//*******************************************************
void setup(){
Serial.begin(9600);
Serial.println("Starting Slave...");
delay(2000);
//Fast-SPI initialisieren
FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
//Zuerst PWM-Treiber disable
Serial.println("Set PWM off");
pinMode(Enable,OUTPUT);
digitalWrite(Enable,LOW);
DisplayRGB(0,0,0);//LED-Streifen auf Schwarz
delay(1000);
Serial.println("Set SPI off");
//Alle Fast-SPI-Lampen aus
for (int a=0;a<NUM_LEDS;a++){
leds[a]=CRGB::Black;
}
Serial.println("Init RS485");
//RS485 Initialisieren
rs485.begin (9600);
pinMode (ENABLE_PIN, OUTPUT); // driver output enable
Serial.println("Start loop...");
}
void SetLight()
{
boolean RedUP=false;
boolean RedDown=false;
boolean GreenUP=false;
boolean GreenDown=false;
boolean BlueUP=false;
boolean BlueDown=false;
if (ActualValue[actualChannel].r < TargetValue[actualChannel].r){RedUP=true;Serial.println("Red up");}
if (ActualValue[actualChannel].r > TargetValue[actualChannel].r){RedDown=true;Serial.println("Red down");}
if (ActualValue[actualChannel].g < TargetValue[actualChannel].g){GreenUP=true;Serial.println("Green up");}
if (ActualValue[actualChannel].g > TargetValue[actualChannel].g){GreenDown=true;Serial.println("Green down");}
if (ActualValue[actualChannel].b < TargetValue[actualChannel].b){BlueUP=true;Serial.println("Blue up");}
if (ActualValue[actualChannel].b > TargetValue[actualChannel].b){BlueDown=true;Serial.println("Blue down");}
Serial.print("Channel: ");
Serial.println(actualChannel);
Serial.println(ActualValue[actualChannel].r);
Serial.println(TargetValue[actualChannel].r);
Serial.println("---");
if(RedUP){ ActualValue[actualChannel].r++;Serial.println("Red add");}
if(RedDown){ ActualValue[actualChannel].r--;Serial.println("Red sub");}
if(GreenUP){ ActualValue[actualChannel].g++;Serial.println("Green add");}
if(GreenDown){ ActualValue[actualChannel].g--;Serial.println("Green sub");}
if(BlueUP){ ActualValue[actualChannel].b++;Serial.println("Blue add");}
if(BlueDown){ ActualValue[actualChannel].b--;Serial.println("Blue sub");}
if (actualChannel==0) //LED-Streifen Schalten
{
DisplayRGB(ActualValue[actualChannel].r,ActualValue[actualChannel].g,ActualValue[actualChannel].b); //PWM ausgeben
}
if (actualChannel==1)
{
//Fast-SPI selben Wert wie LED-Streifen zuweisen
for(int a=0;a<NUM_LEDS;a++){
leds[a].red = ActualValue[actualChannel].r;
leds[a].green= ActualValue[actualChannel].g;
leds[a].blue= ActualValue[actualChannel].b;
FastLED.show(); //Fast-SPI LED Wert anzeigen
}
}
//test if all values are reached.
if (
(ActualValue[actualChannel].r == TargetValue[actualChannel].r) &
(ActualValue[actualChannel].g == TargetValue[actualChannel].g) &
(ActualValue[actualChannel].b == TargetValue[actualChannel].b)
) ValueReached[actualChannel]=true;
}
void CEx_Ctrl::OnChangeBrushColor()
{
// TODO: Add your control notification handler code here
CColorDialog dlg(GetDocument()->m_GM.m_iBrushStyle);
if (dlg.DoModal() == IDOK)
{
GetDocument()->m_GM.m_clrBrush = dlg.GetColor();
Invalidate();
DisplayRGB();
}
}
//*******************************************************
// SETUP
//*******************************************************
void setup(){
//Fast-SPI initialisieren
FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
//Zuerst PWM-Treiber disable
Serial.println("Set PWM off");
pinMode(RelayPin,OUTPUT);
digitalWrite(RelayPin,LOW);
analogWrite(ColumnPin,0);
DisplayRGB(0,0,0);//LED-Streifen auf Schwarz
for(int a=0;a<NUM_LEDS;a++){
leds[a].red = 0;
leds[a].green= 0;
leds[a].blue= 0;
FastLED.show(); //Fast-SPI LED Wert anzeigen
}
Serial.begin(9600);
Serial.println("Starting Slave...");
delay(1000);
Serial.println("Set SPI off");
//Alle Fast-SPI-Lampen aus
for (int a=0;a<NUM_LEDS;a++){
leds[a]=CRGB::Black;
}
Serial.println("Init RS485");
//RS485 Initialisieren
rs485.begin (9600);
pinMode (ENABLE_PIN, OUTPUT); // driver output enable
Serial.println("Start loop...");
//*************Init ohne RS485 ***************
for (int i=0;i<5;i++)
{
TargetValue[i].r=136;
TargetValue[i].g=40;
TargetValue[i].b=0;
}
//***************** INIT END ****************
}
