void SS3OFlyingPiece::Draw(size_t* lastTeam, size_t* lastTex, CVertexArray* va) {
DrawCommon(lastTeam, va);
const float3& interPos = pos + speed * globalRendering->timeOffset;
if (texture != *lastTex) {
*lastTex = texture;
if (*lastTex == 0) {
return;
}
va->DrawArrayTN(GL_QUADS);
va = GetVertexArray();
va->Initialize();
texturehandlerS3O->SetS3oTexture(texture);
}
for (int i = 0; i < 4; i++) {
const SS3OVertex& v = chunk[i];
const float3 tp = transMat.Mul(v.pos) + interPos;
const float3 tn = transMat.Mul(v.normal);
va->AddVertexQTN(tp, v.texCoord.x, v.texCoord.y, tn);
}
}
void S3DOFlyingPiece::Draw(size_t* lastTeam, size_t* lastTex, CVertexArray* va) {
DrawCommon(lastTeam, va);
const float3& interPos = pos + speed * globalRendering->timeOffset;
const C3DOTextureHandler::UnitTexture* tex = chunk->texture;
const std::vector<S3DOVertex>& vertices = piece->vertices;
const std::vector<int>& indices = chunk->vertices;
const float uvCoords[8] = {
tex->xstart, tex->ystart,
tex->xend, tex->ystart,
tex->xend, tex->yend,
tex->xstart, tex->yend
};
for (int i = 0; i < 4; i++) {
const S3DOVertex& v = vertices[indices[i]];
const float3 tp = transMat.Mul(v.pos) + interPos;
const float3 tn = transMat.Mul(v.normal);
va->AddVertexQTN(tp, uvCoords[i << 1], uvCoords[(i << 1) + 1], tn);
}
}
//
// Called by LKDrawLook8000, this is what happens when we change mapspace mode, advancing through types.
// We paint infopages, nearest, tri, etc.etc.
// Normally there is plenty of cpu available because the map is not even calculated.
// This is why we bring to the Draw thread, in the nearest pages case, also calculations.
//
void MapWindow::DrawMapSpace(HDC hdc, RECT rc ) {
HFONT oldfont;
HBRUSH hB;
TextInBoxMode_t TextDisplayMode = {0};
TCHAR Buffer[LKSIZEBUFFERLARGE*2];
#ifdef DRAWLKSTATUS
bool dodrawlkstatus=false;
#endif
static POINT p[10];
if (MapSpaceMode==MSM_WELCOME) {
if (INVERTCOLORS)
hB=LKBrush_Petrol;
else
hB=LKBrush_Mlight;
} else {
if (INVERTCOLORS)
hB=LKBrush_Mdark;
else
hB=LKBrush_Mlight;
}
oldfont = (HFONT)SelectObject(hdc, LKINFOFONT); // save font
if (MapSpaceMode!=MSM_WELCOME) FillRect(hdc,&rc, hB);
if (DoInit[MDI_DRAWMAPSPACE]) {
p[0].x=0; p[0].y=rc.bottom-BottomSize-NIBLSCALE(2); p[1].x=rc.right-1; p[1].y=p[0].y;
p[2].x=0; p[2].y=0; p[3].x=rc.right-1; p[3].y=0; // 091230 right-1
p[4].x=0; p[4].y=0; p[5].x=0; p[5].y=rc.bottom-BottomSize-NIBLSCALE(2);
p[6].x=rc.right-1; p[6].y=0; p[7].x=rc.right-1; p[7].y=rc.bottom-BottomSize-NIBLSCALE(2); // 091230 right-1
// p[8].x=0; p[8].y=rc.bottom-BottomSize-NIBLSCALE(2); p[9].x=rc.right; p[9].y=p[8].y;
/*
StartupStore(_T("DOINIT DRAWMAPSPACE 21=%d=%d 22=%d=%d 23=%d=%d 24=%d=%d 31=%d=%d 32=%d=%d\n"),
ConfIP[LKMODE_WP][0],ConfIP21,
ConfIP[LKMODE_WP][1],ConfIP22,
ConfIP[LKMODE_WP][2],ConfIP23,
ConfIP[LKMODE_WP][3],ConfIP24,
ConfIP[LKMODE_NAV][0],ConfIP31,
ConfIP[LKMODE_NAV][1],ConfIP32);
*/
if (MapSpaceMode==MSM_WELCOME) LoadSplash(hdc,_T("LKPROFILE"));
DoInit[MDI_DRAWMAPSPACE]=false;
}
// Paint borders in green, but only in nearest pages and welcome
if (MapSpaceMode==MSM_WELCOME || (!IsMultiMap() && MapSpaceMode!=MSM_MAP) )
{
if (INVERTCOLORS) {
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[2], p[3], RGB_GREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[4], p[5], RGB_GREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[6], p[7], RGB_GREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[0], p[1], RGB_GREEN, rc);
} else {
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[2], p[3], RGB_DARKGREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[4], p[5], RGB_DARKGREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[6], p[7], RGB_DARKGREEN, rc);
_DrawLine(hdc, PS_SOLID, NIBLSCALE(1), p[0], p[1], RGB_DARKGREEN, rc);
}
}
#ifdef DRAWLKSTATUS
if (LKevent==LKEVENT_NEWRUN) dodrawlkstatus=true;
#endif
// We are entering mapspacemodes with no initial check on configured subpages.
// Thus we need to ensure that the page is really available, or find the first valid.
// However, this will prevent direct customkey access to pages!
// Instead, we do it when we call next page from InfoPageChange
// if (!ConfIP[ModeIndex][CURTYPE]) NextModeType();
switch (MapSpaceMode) {
case MSM_WELCOME:
#if (1)
if (!DrawInfo.NAVWarning) {
static double firsttime=DrawInfo.Time;
// delayed automatic exit from welcome mode
if ( DrawInfo.Time > (firsttime+1.0) ) {
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
if (EnableSoundModes) LKSound(_T("LK_BEEP1.WAV"));
RefreshMap();
break;
}
}
#endif
if(GlobalModelType==MODELTYPE_PNA_MINIMAP)
{
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
break;
}
DrawWelcome8000(hdc, rc);
break;
case MSM_MAPTRK:
SetSideviewPage(IM_HEADING);
LKDrawMultimap_Asp(hdc,rc);
break;
case MSM_MAPWPT:
#if 0
// If there is no destination, force jump to the map
if (GetOvertargetIndex()<0) {
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
break;
}
#endif
SetSideviewPage(IM_NEXT_WP);
LKDrawMultimap_Asp(hdc,rc);
break;
case MSM_MAPASP:
SetSideviewPage(IM_NEAR_AS);
LKDrawMultimap_Asp(hdc,rc);
break;
case MSM_MAPRADAR:
LKDrawMultimap_Radar(hdc,rc);
break;
case MSM_VISUALGLIDE:
SetSideviewPage(IM_VISUALGLIDE);
LKDrawMultimap_Asp(hdc,rc);
break;
case MSM_MAPTEST:
LKDrawMultimap_Test(hdc,rc);
break;
case MSM_LANDABLE:
case MSM_NEARTPS:
case MSM_AIRPORTS:
DrawNearest(hdc, rc);
break;
case MSM_AIRSPACES:
DrawAspNearest(hdc, rc);
break;
case MSM_COMMON:
case MSM_RECENT:
DrawCommon(hdc, rc);
break;
case MSM_MAP:
break;
case MSM_INFO_THERMAL:
case MSM_INFO_CRUISE:
case MSM_INFO_TASK:
case MSM_INFO_AUX:
case MSM_INFO_TRI:
case MSM_INFO_HSI:
case MSM_INFO_TRF:
case MSM_INFO_TARGET:
case MSM_INFO_CONTEST:
DrawInfoPage(hdc,rc, false);
break;
case MSM_TRAFFIC:
DrawTraffic(hdc,rc);
break;
case MSM_THERMALS:
DrawThermalHistory(hdc,rc);
break;
default:
memset((void*)&TextDisplayMode, 0, sizeof(TextDisplayMode));
TextDisplayMode.Color = RGB_WHITE;
TextDisplayMode.NoSetFont = 1;
TextDisplayMode.AlligneCenter = 1;
SelectObject(hdc, LK8TargetFont);
_stprintf(Buffer,TEXT("MapSpaceMode=%d"),MapSpaceMode);
TextInBox(hdc, &rc, Buffer, (rc.right-rc.left)/2, NIBLSCALE(50) , 0, &TextDisplayMode, false);
break;
}
#ifdef DRAWLKSTATUS
// no need to clear dodrawlkstatus, it is already reset at each run
if (dodrawlkstatus) DrawLKStatus(hdc, rc);
#endif
SelectObject(hdc, oldfont);
}