コード例 #1
0
ファイル: eap.c プロジェクト: bluhm/sys
void
eap_resume(struct eap_softc *sc)
{
	int i;

	if (!sc->sc_1371) {
		/* Enable interrupts and looping mode. */
		/* enable the parts we need */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		EWRITE4(sc, EAP_ICSC, EAP_CDC_EN);

		/* reset codec */
		/* normal operation */
		/* select codec clocks */
		eap1370_write_codec(sc, AK_RESET, AK_PD);
		eap1370_write_codec(sc, AK_RESET, AK_PD | AK_NRST);
		eap1370_write_codec(sc, AK_CS, 0x0);

	} else {
		/* clean slate */

		EWRITE4(sc, EAP_SIC, 0);
		EWRITE4(sc, EAP_ICSC, 0);
		EWRITE4(sc, E1371_LEGACY, 0);

		if (sc->sc_ct5880) {
			EWRITE4(sc, EAP_ICSS, EAP_CT5880_AC97_RESET);
			/* Let codec wake up */
			delay(20000);
		}

		ac97_resume(&sc->host_if, sc->codec_if);

		EWRITE4(sc, E1371_SRC, E1371_SRC_DISABLE);
		for (i = 0; i < 0x80; i++)
			eap1371_src_write(sc, i, 0);
		eap1371_src_write(sc, ESRC_ADC + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_ADC_VOLL, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_ADC_VOLR, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC1_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC1_VOLR, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC2_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2_VOLR, ESRC_SET_DAC_VOLI(1));
		EWRITE4(sc, E1371_SRC, 0);

		/* Interrupt enable */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
	}
}
コード例 #2
0
void
eap1371_set_adc_rate(struct eap_softc *sc, int rate)
{
	int freq, n, truncm;
	int out;
	int s;

	/* Whatever, it works, so I'll leave it :) */

	if (rate > 48000)
		rate = 48000;
	if (rate < 4000)
		rate = 4000;
	n = rate / 3000;
	if ((1 << n) & SRC_MAGIC)
		n--;
	truncm = ((21 * n) - 1) | 1;
	freq = ((48000 << 15) / rate) * n;
	if (rate >= 24000) {
		if (truncm > 239)
			truncm = 239;
		out = ESRC_SET_TRUNC((239 - truncm) / 2);
	} else {
		if (truncm > 119)
			truncm = 119;
		out = ESRC_SMF | ESRC_SET_TRUNC((119 - truncm) / 2);
	}
 	out |= ESRC_SET_N(n);
	s = splaudio();
	eap1371_src_write(sc, ESRC_ADC+ESRC_TRUNC_N, out);

      
	out = eap1371_src_read(sc, ESRC_ADC+ESRC_IREGS) & 0xff;
	eap1371_src_write(sc, ESRC_ADC+ESRC_IREGS, out |
	    ESRC_SET_VFI(freq >> 15));
	eap1371_src_write(sc, ESRC_ADC+ESRC_VFF, freq & 0x7fff);
	eap1371_src_write(sc, ESRC_ADC_VOLL, ESRC_SET_ADC_VOL(n));
	eap1371_src_write(sc, ESRC_ADC_VOLR, ESRC_SET_ADC_VOL(n));
	splx(s);
}
コード例 #3
0
void
eap_attach(struct device *parent, struct device *self, void *aux)
{
	struct eap_softc *sc = (struct eap_softc *)self;
	struct pci_attach_args *pa = (struct pci_attach_args *)aux;
	pci_chipset_tag_t pc = pa->pa_pc;
	struct audio_hw_if *eap_hw_if;
	char const *intrstr;
	pci_intr_handle_t ih;
	mixer_ctrl_t ctl;
	int i;
	int revision, ct5880;

	/* Flag if we're "creative" */
	sc->sc_1371 = !(PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ENSONIQ &&
	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_AUDIOPCI);

	revision = PCI_REVISION(pa->pa_class);
	if (sc->sc_1371) {
		if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ENSONIQ &&
		    ((PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_AUDIOPCI97 &&
		    (revision == EAP_ES1373_8 || revision == EAP_CT5880_A)) ||
		    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_CT5880))
			ct5880 = 1;
		else
			ct5880 = 0;
	}

	/* Map I/O register */
	if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
	    &sc->iot, &sc->ioh, NULL, NULL, 0)) {
		return;
	}

	sc->sc_dmatag = pa->pa_dmat;

	/* Map and establish the interrupt. */
	if (pci_intr_map(pa, &ih)) {
		printf(": couldn't map interrupt\n");
		return;
	}
	intrstr = pci_intr_string(pc, ih);
	sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, eap_intr, sc,
	    sc->sc_dev.dv_xname);
	if (sc->sc_ih == NULL) {
		printf(": couldn't establish interrupt");
		if (intrstr != NULL)
			printf(" at %s", intrstr);
		printf("\n");
		return;
	}
	printf(": %s\n", intrstr);

	if (!sc->sc_1371) {
		/* Enable interrupts and looping mode. */
		/* enable the parts we need */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		EWRITE4(sc, EAP_ICSC, EAP_CDC_EN);

		/* reset codec */
		/* normal operation */
		/* select codec clocks */
		eap1370_write_codec(sc, AK_RESET, AK_PD);
		eap1370_write_codec(sc, AK_RESET, AK_PD | AK_NRST);
		eap1370_write_codec(sc, AK_CS, 0x0);

		eap_hw_if = &eap1370_hw_if;

		/* Enable all relevant mixer switches. */
		ctl.dev = EAP_OUTPUT_SELECT;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = 1 << EAP_VOICE_VOL | 1 << EAP_FM_VOL |
		    1 << EAP_CD_VOL | 1 << EAP_LINE_VOL | 1 << EAP_AUX_VOL |
		    1 << EAP_MIC_VOL;
		eap_hw_if->set_port(sc, &ctl);

		ctl.type = AUDIO_MIXER_VALUE;
		ctl.un.value.num_channels = 1;
		for (ctl.dev = EAP_MASTER_VOL; ctl.dev < EAP_MIC_VOL;
		     ctl.dev++) {
			ctl.un.value.level[AUDIO_MIXER_LEVEL_MONO] = VOL_0DB;
			eap_hw_if->set_port(sc, &ctl);
		}
		ctl.un.value.level[AUDIO_MIXER_LEVEL_MONO] = 0;
		eap_hw_if->set_port(sc, &ctl);
		ctl.dev = EAP_MIC_PREAMP;
		ctl.type = AUDIO_MIXER_ENUM;
		ctl.un.ord = 0;
		eap_hw_if->set_port(sc, &ctl);
		ctl.dev = EAP_RECORD_SOURCE;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = 1 << EAP_MIC_VOL;
		eap_hw_if->set_port(sc, &ctl);
	} else {
		/* clean slate */

                EWRITE4(sc, EAP_SIC, 0);
		EWRITE4(sc, EAP_ICSC, 0);
		EWRITE4(sc, E1371_LEGACY, 0);

		if (ct5880) {
			EWRITE4(sc, EAP_ICSS, EAP_CT5880_AC97_RESET);
			/* Let codec wake up */
			delay(20000);
		}

                /* Reset from es1371's perspective */
                EWRITE4(sc, EAP_ICSC, E1371_SYNC_RES);
                delay(20);
                EWRITE4(sc, EAP_ICSC, 0);

		/*
		 * Must properly reprogram sample rate converter,
		 * or it locks up.  Set some defaults for the life of the
		 * machine, and set up a sb default sample rate.
		 */
		EWRITE4(sc, E1371_SRC, E1371_SRC_DISABLE);
		for (i = 0; i < 0x80; i++)
			eap1371_src_write(sc, i, 0);
		eap1371_src_write(sc, ESRC_DAC1+ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC2+ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC1+ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC2+ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_ADC_VOLL, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_ADC_VOLR, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_DAC1_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC1_VOLR, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2_VOLR, ESRC_SET_DAC_VOLI(1));
		eap1371_set_adc_rate(sc, 22050);
		eap1371_set_dac_rate(sc, 22050, 1);
		eap1371_set_dac_rate(sc, 22050, 2);
	     
		EWRITE4(sc, E1371_SRC, 0);

		/* Reset codec */

		/* Interrupt enable */
		sc->host_if.arg = sc;
		sc->host_if.attach = eap1371_attach_codec;
		sc->host_if.read = eap1371_read_codec;
		sc->host_if.write = eap1371_write_codec;
		sc->host_if.reset = eap1371_reset_codec;
		sc->host_if.flags = eap_flags_codec;
		sc->flags = AC97_HOST_DONT_READ;
	
		if (ac97_attach(&sc->host_if) == 0) {
			/* Interrupt enable */
			EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		} else
			return;

		eap_hw_if = &eap1371_hw_if;

		/* Just enable the DAC and master volumes by default */
		ctl.type = AUDIO_MIXER_ENUM;
		ctl.un.ord = 0;  /* off */
		ctl.dev = eap1371_get_portnum_by_name(sc, AudioCoutputs,
		    AudioNmaster, AudioNmute);
		eap1371_mixer_set_port(sc, &ctl);
		ctl.dev = eap1371_get_portnum_by_name(sc, AudioCinputs,
		    AudioNdac, AudioNmute);
		eap1371_mixer_set_port(sc, &ctl);
		ctl.dev = eap1371_get_portnum_by_name(sc, AudioCrecord,
		    AudioNvolume, AudioNmute);
		eap1371_mixer_set_port(sc, &ctl);
		
		ctl.dev = eap1371_get_portnum_by_name(sc, AudioCrecord,
		    AudioNsource, NULL);
		ctl.type = AUDIO_MIXER_ENUM;
		ctl.un.ord = 0;
		eap1371_mixer_set_port(sc, &ctl);

	}

	audio_attach_mi(eap_hw_if, sc, &sc->sc_dev);
#if NMIDI > 0
	sc->sc_mididev = midi_attach_mi(&eap_midi_hw_if, sc, &sc->sc_dev);
#endif
}
コード例 #4
0
ファイル: eap.c プロジェクト: sofuture/bitrig
int
eap_resume(struct eap_softc *sc)
{
	mixer_ctrl_t ctl;
	int i;

	if (!sc->sc_1371) {
		/* Enable interrupts and looping mode. */
		/* enable the parts we need */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		EWRITE4(sc, EAP_ICSC, EAP_CDC_EN);

		/* reset codec */
		/* normal operation */
		/* select codec clocks */
		eap1370_write_codec(sc, AK_RESET, AK_PD);
		eap1370_write_codec(sc, AK_RESET, AK_PD | AK_NRST);
		eap1370_write_codec(sc, AK_CS, 0x0);

		bzero(&ctl, sizeof(ctl));

		ctl.dev = EAP_RECORD_SOURCE;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = sc->sc_record_source;
		eap1370_hw_if.set_port(sc, &ctl);

		ctl.dev = EAP_INPUT_SOURCE;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = sc->sc_input_source;
		eap1370_hw_if.set_port(sc, &ctl);

		eap1370_set_mixer(sc, AK_MGAIN, sc->sc_mic_preamp);

		for (i = EAP_MASTER_VOL; i < EAP_MIC_VOL; i++)
			eap1370_write_codec(sc, i, sc->sc_port[i]);

	} else {
		/* clean slate */

		EWRITE4(sc, EAP_SIC, 0);
		EWRITE4(sc, EAP_ICSC, 0);
		EWRITE4(sc, E1371_LEGACY, 0);

		if (sc->sc_ct5880) {
			EWRITE4(sc, EAP_ICSS, EAP_CT5880_AC97_RESET);
			/* Let codec wake up */
			delay(20000);
		}

		ac97_resume(&sc->host_if, sc->codec_if);

		EWRITE4(sc, E1371_SRC, E1371_SRC_DISABLE);
		for (i = 0; i < 0x80; i++)
			eap1371_src_write(sc, i, 0);
		eap1371_src_write(sc, ESRC_ADC + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_ADC_VOLL, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_ADC_VOLR, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC1_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC1_VOLR, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC2_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2_VOLR, ESRC_SET_DAC_VOLI(1));
		EWRITE4(sc, E1371_SRC, 0);

		/* Interrupt enable */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
	}

	return (0);
}
コード例 #5
0
ファイル: eap.c プロジェクト: sofuture/bitrig
void
eap_attach(struct device *parent, struct device *self, void *aux)
{
	struct eap_softc *sc = (struct eap_softc *)self;
	struct pci_attach_args *pa = (struct pci_attach_args *)aux;
	pci_chipset_tag_t pc = pa->pa_pc;
	struct audio_hw_if *eap_hw_if;
	char const *intrstr;
	pci_intr_handle_t ih;
	mixer_ctrl_t ctl;
	int i;
	int revision;

	/* Flag if we're "creative" */
	sc->sc_1371 = !(PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ENSONIQ &&
	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_AUDIOPCI);

	revision = PCI_REVISION(pa->pa_class);
	if (sc->sc_1371) {
		if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ENSONIQ &&
		    ((PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_AUDIOPCI97 &&
		    (revision == EAP_ES1373_8 || revision == EAP_CT5880_A)) ||
		    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ENSONIQ_CT5880))
			sc->sc_ct5880 = 1;
	}

	/* Map I/O register */
	if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
	    &sc->iot, &sc->ioh, NULL, NULL, 0)) {
		return;
	}

	sc->sc_dmatag = pa->pa_dmat;

	/* Map and establish the interrupt. */
	if (pci_intr_map(pa, &ih)) {
		printf(": couldn't map interrupt\n");
		return;
	}
	intrstr = pci_intr_string(pc, ih);
	sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, eap_intr, sc,
	    sc->sc_dev.dv_xname);
	if (sc->sc_ih == NULL) {
		printf(": couldn't establish interrupt");
		if (intrstr != NULL)
			printf(" at %s", intrstr);
		printf("\n");
		return;
	}
	printf(": %s\n", intrstr);

	if (!sc->sc_1371) {
		/* Enable interrupts and looping mode. */
		/* enable the parts we need */
		EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		EWRITE4(sc, EAP_ICSC, EAP_CDC_EN);

		/* reset codec */
		/* normal operation */
		/* select codec clocks */
		eap1370_write_codec(sc, AK_RESET, AK_PD);
		eap1370_write_codec(sc, AK_RESET, AK_PD | AK_NRST);
		eap1370_write_codec(sc, AK_CS, 0x0);

		eap_hw_if = &eap1370_hw_if;

		/* Enable all relevant mixer switches. */
		ctl.dev = EAP_INPUT_SOURCE;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = 1 << EAP_VOICE_VOL | 1 << EAP_FM_VOL |
		    1 << EAP_CD_VOL | 1 << EAP_LINE_VOL | 1 << EAP_AUX_VOL |
		    1 << EAP_MIC_VOL;
		eap_hw_if->set_port(sc, &ctl);

		ctl.type = AUDIO_MIXER_VALUE;
		ctl.un.value.num_channels = 1;
		for (ctl.dev = EAP_MASTER_VOL; ctl.dev < EAP_MIC_VOL;
		     ctl.dev++) {
			ctl.un.value.level[AUDIO_MIXER_LEVEL_MONO] = VOL_0DB;
			eap_hw_if->set_port(sc, &ctl);
		}
		ctl.un.value.level[AUDIO_MIXER_LEVEL_MONO] = 0;
		eap_hw_if->set_port(sc, &ctl);
		ctl.dev = EAP_MIC_PREAMP;
		ctl.type = AUDIO_MIXER_ENUM;
		ctl.un.ord = 0;
		eap_hw_if->set_port(sc, &ctl);
		ctl.dev = EAP_RECORD_SOURCE;
		ctl.type = AUDIO_MIXER_SET;
		ctl.un.mask = 1 << EAP_MIC_VOL;
		eap_hw_if->set_port(sc, &ctl);
	} else {
		/* clean slate */

                EWRITE4(sc, EAP_SIC, 0);
		EWRITE4(sc, EAP_ICSC, 0);
		EWRITE4(sc, E1371_LEGACY, 0);

		if (sc->sc_ct5880) {
			EWRITE4(sc, EAP_ICSS, EAP_CT5880_AC97_RESET);
			/* Let codec wake up */
			delay(20000);
		}

                /* Reset from es1371's perspective */
                EWRITE4(sc, EAP_ICSC, E1371_SYNC_RES);
                delay(20);
                EWRITE4(sc, EAP_ICSC, 0);

		/*
		 * Must properly reprogram sample rate converter,
		 * or it locks up.
		 *
		 * We don't know how to program it (no documentation),
		 * and the linux/oss magic receipe doesn't work (breaks
		 * full-duplex, by selecting different play and record
		 * rates). On the other hand, the sample rate converter
		 * can't be disabled (disabling it would disable DMA),
		 * so we use these magic defaults that make it "resample"
		 * 48kHz to 48kHz without breaking full-duplex.
		 */
		EWRITE4(sc, E1371_SRC, E1371_SRC_DISABLE);
		for (i = 0; i < 0x80; i++)
			eap1371_src_write(sc, i, 0);
		eap1371_src_write(sc, ESRC_ADC + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_ADC + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_ADC_VOLL, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_ADC_VOLR, ESRC_SET_ADC_VOL(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC1 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC1_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC1_VOLR, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_IREGS, ESRC_SET_VFI(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_TRUNC_N, ESRC_SET_N(16));
		eap1371_src_write(sc, ESRC_DAC2 + ESRC_VFF, 0);
		eap1371_src_write(sc, ESRC_DAC2_VOLL, ESRC_SET_DAC_VOLI(1));
		eap1371_src_write(sc, ESRC_DAC2_VOLR, ESRC_SET_DAC_VOLI(1));
		EWRITE4(sc, E1371_SRC, 0);

		/* Reset codec */

		/* Interrupt enable */
		sc->host_if.arg = sc;
		sc->host_if.attach = eap1371_attach_codec;
		sc->host_if.read = eap1371_read_codec;
		sc->host_if.write = eap1371_write_codec;
		sc->host_if.reset = eap1371_reset_codec;
		sc->host_if.flags = eap_flags_codec;
		sc->flags = AC97_HOST_DONT_READ;
	
		if (ac97_attach(&sc->host_if) == 0) {
			/* Interrupt enable */
			EWRITE4(sc, EAP_SIC, EAP_P2_INTR_EN | EAP_R1_INTR_EN);
		} else
			return;

		eap_hw_if = &eap1371_hw_if;
	}

	audio_attach_mi(eap_hw_if, sc, &sc->sc_dev);
#if NMIDI > 0
	sc->sc_mididev = midi_attach_mi(&eap_midi_hw_if, sc, &sc->sc_dev);
#endif
}