static int nuri_bl_notify(struct device *dev, int brightness)
{
if (brightness < 1)
brightness = 0;
gpio_set_value(EXYNOS4_GPE2(3), 1);
return brightness;
}
static int nuri_bl_init(struct device *dev)
{
int ret, gpio = EXYNOS4_GPE2(3);
ret = gpio_request(gpio, "LCD_LDO_EN");
if (!ret)
gpio_direction_output(gpio, 0);
return ret;
}
static void __init universal_tsp_init(void)
{
int gpio;
/* TSP_LDO_ON: XMDMADDR_11 */
gpio = EXYNOS4_GPE2(3);
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
gpio = EXYNOS4_GPE1(7);
gpio_request(gpio, "TSP_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
i2c3_devs[0].irq = gpio_to_irq(gpio);
}
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
};
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
.buck1_voltage1 = 1100000, /* INT */
.buck1_voltage2 = 1000000,
.buck1_voltage3 = 1100000,
.buck1_voltage4 = 1000000,
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
enum fixed_regulator_id {
FIXED_REG_ID_MMC0,
FIXED_REG_ID_HDMI_5V,
FIXED_REG_ID_CAM_S_IF,
FIXED_REG_ID_CAM_I_CORE,
FIXED_REG_ID_CAM_VT_DIO,
};
static struct regulator_consumer_supply hdmi_fixed_consumer =
REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
static void nuri_bl_exit(struct device *dev)
{
gpio_free(EXYNOS4_GPE2(3));
}
static int nuri_bl_init(struct device *dev)
{
return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
"LCD_LD0_EN");
}
};
static struct platform_device max8903_fixed_reg_dev = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MAX8903,
.dev = { .platform_data = &max8903_charger_en },
};
static struct max8903_pdata nuri_max8903 = {
/*
* cen: don't control with the driver, let it be
* controlled by regulator above
*/
.dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
/* uok, usus: not connected */
.chg = EXYNOS4_GPE2(0), /* TA_nCHG */
/* flt: vcc_1.8V_pda */
.dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
.dc_valid = true,
.usb_valid = false, /* USB is not wired to MAX8903 */
};
static struct platform_device nuri_max8903_device = {
.name = "max8903-charger",
.dev = {
.platform_data = &nuri_max8903,
},
};
static void __init nuri_power_init(void)
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
};
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
.buck1_voltage1 = 1100000, /* INT */
.buck1_voltage2 = 1000000,
.buck1_voltage3 = 1100000,
.buck1_voltage4 = 1000000,
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
I2C_BOARD_INFO("max8952", 0xC0 >> 1),
.platform_data = &universal_max8952_pdata,
}, {
I2C_BOARD_INFO("lp3974", 0xCC >> 1),
.platform_data = &universal_lp3974_pdata,
},
};
},
}, {
.chip = {
.base = EXYNOS4_GPE0(0),
.ngpio = EXYNOS4_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
.base = EXYNOS4_GPE1(0),
.ngpio = EXYNOS4_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
.base = EXYNOS4_GPE2(0),
.ngpio = EXYNOS4_GPIO_E2_NR,
.label = "GPE2",
},
}, {
.chip = {
.base = EXYNOS4_GPE3(0),
.ngpio = EXYNOS4_GPIO_E3_NR,
.label = "GPE3",
},
}, {
.chip = {
.base = EXYNOS4_GPE4(0),
.ngpio = EXYNOS4_GPIO_E4_NR,
.label = "GPE4",
},
