// Read up to the specified number of bytes, return bytes actually read
u32 ser_read( int id, u8* dest, u32 maxsize )
{
DWORD dwRxSize;
FT_STATUS ftStatus;
DWORD dwBytesRead;
if( ser_timeout == SER_INF_TIMEOUT ) {
printf( "infinite timeout selected.\n" );
FT_SetTimeouts(ftHandle[id], 10000000, 10000000); // a couple hours to timeout...
dwRxSize = 0;
ftStatus = FT_OK;
while ((dwRxSize < maxsize) && (ftStatus == FT_OK)) {
ftStatus = FT_GetQueueStatus(ftHandle[id], &dwRxSize);
}
if(ftStatus == FT_OK) {
if((ftStatus = FT_Read(ftHandle[id], dest, maxsize, &dwBytesRead)) != FT_OK) {
printf("Error FT_Read(%d)\n", ftStatus);
}
else {
if( ser_dbg )
printf("FT_Read = %d\n", dwBytesRead);
}
}
else {
printf("Error FT_GetQueueStatus(%d)\n", ftStatus);
return 0;
}
return (u32) dwBytesRead;
}
else
{
// fd_set readfs;
// struct timeval tv;
// int retval;
if( ser_timeout == 0 )
ser_timeout = 1;
//fprintf(stderr,"setting timeout to %u\n", ser_timeout );
//fprintf(stderr,"read size: %d\n",maxsize);
//fprintf(stderr,"id: %d\n",id);
FT_SetTimeouts(ftHandle[id], ser_timeout, ser_timeout);
if((ftStatus = FT_Read(ftHandle[id], dest, maxsize, &dwBytesRead)) != FT_OK) {
// fprintf(stderr,"Error FT_Read(%d)\n", ftStatus);
}
else {
ftStatus = FT_GetQueueStatus(ftHandle[id], &dwRxSize);
// fprintf(stderr," - ser_read [%d | %02x] . %d\n", dwBytesRead, *dest & 0xFF, dwRxSize);
}
//fprintf(stderr,"read: %u\n",dwBytesRead);
return (u32) dwBytesRead;
}
}
FT_STATUS ftdimut_init() {
FT_STATUS ftStatus;
unsigned char buf[4];
unsigned int bytesRead = 0;
if(ftdimut_getData(0x17) != 0) {
return FT_OK;
}
printf("Sending 0x00 at 5 baud\n");
printf("Break on......\n");
ftStatus = FT_SetBreakOn(ftHandle);
if(ftStatus != FT_OK) return ftStatus;
usleep(1800 * 1000);
printf("Break off......\n");
ftStatus = FT_SetBreakOff(ftHandle);
if(ftStatus != FT_OK) return ftStatus;
ftStatus = FT_Read(ftHandle, buf, 4, &bytesRead);
if(ftStatus != FT_OK) return ftStatus;
if(bytesRead == 4) {
return FT_OK;
}
return FT_OTHER_ERROR;
}
/*
* Class: kinetic_Kinetic1090Puck
* Method: puckRead
* Signature: ()[I
*/
JNIEXPORT jintArray JNICALL Java_kinetic_Kinetic1090Puck_puckRead(JNIEnv *env, jobject obj)
{
DWORD rxBytes;
DWORD txBytes;
DWORD eventDWord;
DWORD bytesReturned;
FT_STATUS ftStatus = FT_GetStatus(ftHandle, &rxBytes, &txBytes, &eventDWord);
if(ftStatus != FT_OK) {
return (*env)->NewIntArray(env,0);
}
if(rxBytes == 0) {
return (*env)->NewIntArray(env,0);
}
if(rxBytes > 1024) {
rxBytes = 1024;
}
ftStatus = FT_Read(ftHandle, rxBuffer, rxBytes, &bytesReturned);
jintArray outputArray = (*env)->NewIntArray(env, bytesReturned);
jint *outputBody = (*env)->GetIntArrayElements(env, outputArray, 0);
for(int i=0;i<bytesReturned;i++) {
outputBody[i] = (int)(rxBuffer[i]);
}
(*env)->ReleaseIntArrayElements(env, outputArray, outputBody, 0);
return outputArray;
}
void* ReadData(void* ptr)
{
DeviceParams_t* device = (DeviceParams_t*)ptr;
DWORD RxBytes;
FT_STATUS status;
printf("Thread Started\r\n");
while(true)
{
WaitForData(device);
status = FT_GetQueueStatus(device->handle, &RxBytes);
if(status != FT_OK)
{
fprintf(stderr, "Can't read from ftdi device: %d\n", status);
return NULL;
}
//printf("RX %s [%d]\r\n", device->serial, RxBytes);
if(RxBytes > 0)
{
DWORD BytesReceived;
char* data = new char[RxBytes];
FT_Read(device->handle, data, RxBytes, &BytesReceived);
fprintf(stderr, "%d Bytes Read\n", BytesReceived);
delete[] data;
}
}
return NULL;
}
bool CMmcUsbHndlBase::Read(void *pDataBuffer, unsigned int dNumberOfBytesToRead, unsigned int *pdNumberOfBytesRead)
{
if( !AreLibraryFunctionsLoaded() )
{
perror("Library not loaded");
return false;
}
FT_STATUS ftStatus = FT_Read(m_Handle, pDataBuffer, dNumberOfBytesToRead, (DWORD*)pdNumberOfBytesRead);
if( ftStatus != FT_OK )
{
std::string errormsg = GetFtStatusDescription(ftStatus);
errormsg += ":FT_Read";
perror(errormsg.c_str());
return false;
}
if( *pdNumberOfBytesRead <= 0 )
{
//perror("Read processed successfully, but number of read bytes is 0");
return false;
}
return true;
}
void FT232R_SPI::ftdi_spi_rw(unsigned char *write, unsigned char *read, int size){
unsigned char * buffWrite = (unsigned char *)malloc((size+2)*((8*3)+3));
unsigned char * buffRead = (unsigned char *)malloc((size+2)*((8*3)+3));
int index = 0;
state &= ~CSN;
buffWrite[index++] = state;
for(int i = 0; i < size; i++){
index += ftdi_byte_encode(buffWrite+index, write[i]);
}
state |= CSN;
buffWrite[index++] = state;
#ifdef _WIN32
DWORD written = 0;
FT_Write(ftHandle,(void*)buffWrite, index, &written);
written = 0;
FT_Read(ftHandle, (void*) buffRead, index, &written);
#elif __linux__
unsigned int written = 0;
written = ftdi_write_data(ftdi, (unsigned char*)buffWrite, index);
ftdi_read_data(ftdi, (unsigned char*) buffRead, index);
#endif
ftdi_spi_decode(buffRead, written, read);
free(buffWrite);
free(buffRead);
}
void getSerialNumber( FT_HANDLE ftHandle )
{
FT_STATUS status;
char buf[80];
char c;
char *p;
unsigned long nBytesWritten;
unsigned long eventStatus;
unsigned long nRxCnt;// Number of characters in receive queue
unsigned long nTxCnt;// Number of characters in transmit queue
memset( buf, 0, sizeof( buf ) );
printf("Get serial number.\n");
printf("==================\n");
FT_Purge( ftHandle, FT_PURGE_RX | FT_PURGE_TX );
sprintf( buf, "N\r" );
if ( FT_OK != ( status = FT_Write( ftHandle, buf, strlen( buf ), &nBytesWritten ) ) ) {
printf("Error: Failed to write command. return code = %d\n", status );
return;
}
// Check if there is something to receive
while ( 1 ){
if ( FT_OK == FT_GetStatus( ftHandle, &nRxCnt, &nTxCnt, &eventStatus ) ) {
// If there are characters to receive
if ( nRxCnt ) {
if ( FT_OK != ( status = FT_Read( ftHandle, buf, nRxCnt, &nBytesWritten ) ) ) {
printf("Error: Failed to read data. return code = %d\n", status );
return;
}
p = buf;
while ( *p ) {
if ( 0x0d == *p ) {
*p = 0;
break;
}
p++;
}
printf( "Serial = %s \n", buf );
break;
}
}
else {
printf("Error: Failed to get status. return code = %d\n", status );
return;
}
}
}
extern "C" BOOL ReadByteEx (BYTE *data, int timeout, BOOL warn)
{
if(data == NULL)
return FALSE;
if (ParPort == -1)
{
DWORD BytesReceived = 0;
FT_SetTimeouts(ftHandleA,timeout*1000,0);
ftStatus = FT_Read(ftHandleA,RxBuffer,1,&BytesReceived);
if (ftStatus == FT_OK)
{
if (BytesReceived == 1)
{
// FT_Read OK
*data = RxBuffer[0];
return TRUE;
}
else
{
// FT_Read Timeout
if (warn)
MessageBox(topHWnd, "USB Error: Read Timeout", "ReadByteEx", MB_OK | MB_ICONERROR);
return FALSE;
}
}
else
{
// FT_Read Failed
if (warn)
MessageBox(topHWnd, "USB Error: Read Failed", "ReadByteEx", MB_OK | MB_ICONERROR);
return FALSE;
}
}
else
{
BYTE a, b;
time_t starttime = time(NULL);
shadow |= 0x20;
pwControl(shadow); // set port to input mode
b = prStatus(); // wait for ACK
while (!((b ^ c) & 0x20))
{
b = prStatus();
if (time(NULL) > starttime + (time_t)timeout)
{
if (warn)
MessageBox(topHWnd, "Timeout on data transfer!", "ReadByte", MB_OK | MB_ICONERROR);
return FALSE;
}
}
c = b;
a = prData(); // read data
shadow ^= 0x02;
pwControl(shadow); // signal byte received
*data = a;
return TRUE;
}
}
/**
* Чтение данных с устройства
*/
int FtdiDevices::readData( char *data, DWORD size, unsigned int *rcnt ) {
FT_STATUS ftStatus;
DWORD BytesReceived;
QString msg = QString(" Исполнение операции чтения (READ)."\
" Дескриптор устройства = %1"\
" Размер = %2").arg( ( int )m_ftHandleA ).arg( size );
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.INFO_MSG_TYPE, msg, appLogger.SYSTEM_LOGGER );
ftStatus = FT_SetTimeouts( m_ftHandleA, 100, 100 );
if ( ftStatus != FT_OK ) {
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.ERROR_MSG_TYPE,
" Операция установки таймаута не выполнена! ",
appLogger.SYSTEM_LOGGER );
}
else {
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.INFO_MSG_TYPE,
" Операция установки таймаута выполнена! ",
appLogger.SYSTEM_LOGGER );
}
ftStatus = FT_Read( m_ftHandleA, data, size, &BytesReceived );
/* Запись дампа пакета в лог */
if ( BytesReceived != 0) {
appLogger.sendDataToViewer( appLogger.INFO_MSG_TYPE, "Дамп ответа: ", appLogger.PROTOCOL_LOGGER );
QString dump = "";
for ( unsigned int i = 0; i < BytesReceived; i++ ) {
dump += QString(" 0x%1 ").arg( (unsigned char)data[i], 0, 16 );
}
appLogger.sendDataToViewer( appLogger.INFO_MSG_TYPE, dump, appLogger.PROTOCOL_LOGGER );
}
*rcnt = BytesReceived;
if ( ftStatus == FT_OK ) {
if ( BytesReceived == size ) {
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.INFO_MSG_TYPE,QString(" Все данные получены успешно! "), appLogger.SYSTEM_LOGGER );
}
else {
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.WARNING_MSG_TYPE,QString(" Не все данные получены успешно! "), appLogger.SYSTEM_LOGGER );
return FT_ERROR;
}
}
else {
/* Запись в лог сообщения */
appLogger.sendDataToViewer( appLogger.ERROR_MSG_TYPE, QString(" Read выполнился с ошибкой! "), appLogger.SYSTEM_LOGGER );
return FT_ERROR;
}
return FT_SUCCESSFUL;
}
QString FTD2XXInterface::readLabel(uchar label, int *ESTA_code)
{
FT_HANDLE ftdi = NULL;
if (FT_Open(id(), &ftdi) != FT_OK)
return QString();
if(FT_ResetDevice(ftdi) != FT_OK)
return QString();
if(FT_SetBaudRate(ftdi, 250000) != FT_OK)
return QString();
if(FT_SetDataCharacteristics(ftdi, FT_BITS_8, FT_STOP_BITS_2, FT_PARITY_NONE) != FT_OK)
return QString();
if(FT_SetFlowControl(ftdi, 0, 0, 0) != FT_OK)
return QString();
QByteArray request;
request.append(ENTTEC_PRO_START_OF_MSG);
request.append(label);
request.append(ENTTEC_PRO_DMX_ZERO); // data length LSB
request.append(ENTTEC_PRO_DMX_ZERO); // data length MSB
request.append(ENTTEC_PRO_END_OF_MSG);
DWORD written = 0;
if (FT_Write(ftdi, (char*) request.data(), request.size(), &written) != FT_OK)
return QString();
if (written == 0)
{
qDebug() << Q_FUNC_INFO << "Cannot write data to device";
return QString();
}
uchar* buffer = (uchar*) malloc(sizeof(uchar) * 40);
Q_ASSERT(buffer != NULL);
int read = 0;
QByteArray array;
FT_SetTimeouts(ftdi, 500,0);
FT_Read(ftdi, buffer, 40, (LPDWORD) &read);
qDebug() << Q_FUNC_INFO << "----- Read: " << read << " ------";
for (int i = 0; i < read; i++)
array.append((char) buffer[i]);
if (array[0] != ENTTEC_PRO_START_OF_MSG)
qDebug() << Q_FUNC_INFO << "Reply message wrong start code: " << QString::number(array[0], 16);
*ESTA_code = (array[5] << 8) | array[4];
array.remove(0, 6); // 4 bytes of Enttec protocol + 2 of ESTA ID
array.replace(ENTTEC_PRO_END_OF_MSG, '\0'); // replace Enttec termination with string termination
FT_Close(ftdi);
return QString(array);
}
int D2xxSerial::read(unsigned char *buffer, int length) {
DWORD BytesReceived = 0;
FT_STATUS err = FT_Read(handle,buffer, length,&BytesReceived);
if (err != FT_OK) {
printf("Error reading: %s\n", getError(err));
return 0;
}
return BytesReceived;
}
UCHAR ReadBits(void) {
UCHAR Value;
DWORD BytesRead;
FT_Status = FT_Read(FT_Handle, &Value, 1, &BytesRead);
if (FT_Status != FT_OK) {
printf("\nFT_Read error (%d), Cable disconnected?\n", FT_Status);
Idle(2000); // Display error message for 2 seconds
Quit();
}
return ~Value;
}
NDI_DECL1 unsigned int NDI_DECL2 LinkRead( void *pData, unsigned int uSize )
{
DWORD dwRead;
if( s_hndl )
{
if( FT_Read( s_hndl, pData, uSize, &dwRead ) == FT_OK )
return dwRead;
} /* if */
return 0;
}
static int pm_read(struct pm_context *pm, char *buffer, unsigned int count)
{
FT_STATUS ftstat;
DWORD bytes_read;
ftstat = FT_Read(pm->handle, buffer, count, &bytes_read);
if (ftstat == FT_OK && count == bytes_read)
return bytes_read;
return -1;
}
unsigned char ftdimut_getData(unsigned char request) {
unsigned int bytesRead, bytesWrote;
unsigned char buf[2];
FT_Write(ftHandle, &request, 1, &bytesWrote);
if(bytesWrote != 1) {
return 0;
}
FT_Read(ftHandle, buf, 2, &bytesRead);
if(bytesRead != 2) {
return 0;
}
return buf[1];
}
int main(int argc, char *argv[])
{
char * pcBufRead;
DWORD dwBytesRead;
FILE * fh;
FT_HANDLE ftHandle;
FT_STATUS ftStatus;
int iport;
if(argc > 1) {
sscanf(argv[1], "%d", &iport);
}
else {
iport = 0;
}
fh = fopen("target.bin", "wb+");
if(fh == NULL) {
printf("Cant open source file\n");
return 1;
}
ftStatus = FT_Open(iport, &ftHandle);
if(ftStatus != FT_OK) {
/*
This can fail if the ftdi_sio driver is loaded
use lsmod to check this and rmmod ftdi_sio to remove
also rmmod usbserial
*/
printf("FT_Open(%d) failed\n", iport);
return 1;
}
pcBufRead = (char *)malloc(BUF_SIZE);
FT_ResetDevice(ftHandle);
FT_SetBaudRate(ftHandle, 115200);
FT_SetDtr(ftHandle);
FT_SetRts(ftHandle);
FT_SetFlowControl(ftHandle, FT_FLOW_RTS_CTS, 0, 0);
FT_SetTimeouts(ftHandle, 0, 0); // infinite timeouts
FT_SetBitMode(ftHandle, 0xFF, 0x01);
FT_Read(ftHandle, pcBufRead, BUF_SIZE, &dwBytesRead);
fwrite(pcBufRead, 1, dwBytesRead, fh);
fclose(fh);
free(pcBufRead);
FT_Close(ftHandle);
return 0;
}
static int
usbconn_ftd2xx_read (urj_usbconn_t *conn, uint8_t *buf, int len)
{
ftd2xx_param_t *p = conn->params;
int cpy_len;
FT_STATUS status = FT_OK;
DWORD recvd = 0;
urj_log (URJ_LOG_LEVEL_COMM, "%sread begin: len %d\n", module, len);
if (!p->fc)
return -1;
/* flush send buffer to get all scheduled receive bytes */
if (usbconn_ftd2xx_flush (p) < 0)
return -1;
if (len == 0)
return 0;
/* check for number of remaining bytes in receive buffer */
cpy_len = p->recv_write_idx - p->recv_read_idx;
if (cpy_len > len)
cpy_len = len;
len -= cpy_len;
if (cpy_len > 0)
{
/* get data from the receive buffer */
memcpy (buf, &p->recv_buf[p->recv_read_idx], cpy_len);
p->recv_read_idx += cpy_len;
if (p->recv_read_idx == p->recv_write_idx)
p->recv_read_idx = p->recv_write_idx = 0;
}
if (len > 0)
{
/* need to get more data directly from the device */
while (recvd == 0)
if ((status =
FT_Read (p->fc, &buf[cpy_len], len, &recvd)) != FT_OK)
urj_error_set (URJ_ERROR_FTD, _("Error from FT_Read(): %s"),
ftd2xx_status_string(status));
}
urj_log (URJ_LOG_LEVEL_COMM, "%sread end : status %ld, length %d\n",
module, status, cpy_len + len);
return status != FT_OK ? -1 : cpy_len + len;
}
static int ft245r_recv(PROGRAMMER * pgm, char * buf, size_t len)
{
FT_STATUS r;
DWORD rlen;
r = FT_Read(handle, buf, len, &rlen);
if (r != FT_OK || len != rlen) {
fprintf(stderr,
"%s: ft245r_recv(): programmer is not responding\n",
progname);
exit(1);
}
return 0;
}
int APSRack::raw_read(int deviceID, FPGASELECT fpga) {
DWORD bytesRead, bytesWritten;
UCHAR dataBuffer[2];
USHORT transferSize = 1;
int Command = APS_FPGA_IO;
//Send the read command byte
UCHAR commandPacket = 0x80 | Command | (fpga<<2) | transferSize;
FT_Write(APSs_[deviceID].handle_, &commandPacket, 1, &bytesWritten);
//Look for the data
FT_Read(APSs_[deviceID].handle_, dataBuffer, 2, &bytesRead);
FILE_LOG(logDEBUG2) << "Read " << bytesRead << " bytes with value" << myhex << ((dataBuffer[0] << 8) | dataBuffer[1]);
return int((dataBuffer[0] << 8) | dataBuffer[1]);
}
int gecko_readbyte(LPVOID lpBuffer, DWORD dwBytesToRead, LPDWORD lpdwBytesReturned)
{
// read data based on FTDI D2XX USB 2.0 API
status = FT_Read(fthandle, lpBuffer, dwBytesToRead, lpdwBytesReturned);
if (status == FT_OK) {
if(*lpdwBytesReturned != dwBytesToRead)
return 2;
} else {
eprintf("Error: Read Error. Closing\n");
status = FT_Close(fthandle);
return 0;
}
return 1;
}
static int ublast_ftd2xx_read(struct ublast_lowlevel *low, uint8_t *buf,
unsigned size, uint32_t *bytes_read)
{
DWORD dw_bytes_read;
FT_STATUS status;
FT_HANDLE *ftdih = ublast_getftdih(low);
status = FT_Read(*ftdih, buf, size, &dw_bytes_read);
if (status != FT_OK) {
*bytes_read = dw_bytes_read;
LOG_ERROR("FT_Read returned: %s", ftd2xx_status_string(status));
return ERROR_JTAG_DEVICE_ERROR;
}
*bytes_read = dw_bytes_read;
return ERROR_OK;
}
int dxl_hal_rx( unsigned char *pPacket, int numPacket )
{
FT_STATUS ft_status;
DWORD dwNumToRead;
DWORD dwNumRead = 0;
ft_status = FT_GetQueueStatus( ghFt_Handle, &dwNumToRead );
if( ft_status != FT_OK )
return 0;
if( dwNumToRead > 0 )
{
ft_status = FT_Read( ghFt_Handle, (LPVOID)pPacket, dwNumToRead, &dwNumRead );
if( ft_status == FT_IO_ERROR )
return 0;
}
return (int)dwNumRead;
}
int main(int argc, char *argv[])
{
char cBufRead[BUF_SIZE];
DWORD dwBytesRead;
FT_STATUS ftStatus;
FT_HANDLE ftHandle;
int iport;
int i;
if(argc > 1) {
sscanf(argv[1], "%d", &iport);
}
else {
iport = 0;
}
ftStatus = FT_Open(iport, &ftHandle);
if(ftStatus != FT_OK) {
/*
This can fail if the ftdi_sio driver is loaded
use lsmod to check this and rmmod ftdi_sio to remove
also rmmod usbserial
*/
printf("FT_Open(%d) failed, with error %d.\n", iport, (int)ftStatus);
printf("Use lsmod to check if ftdi_sio (and usbserial) are present.\n");
printf("If so, unload them using rmmod, as they conflict with ftd2xx.\n");
return 1;
}
FT_SetTimeouts(ftHandle, 3000, 3000); // 3 second read timeout
for(i = 0; i < 10 ; i++) {
FT_Read(ftHandle, cBufRead, BUF_SIZE, &dwBytesRead);
if(dwBytesRead != BUF_SIZE)
printf("Timeout %d\n", i);
else
printf("Read %d\n", (int)dwBytesRead);
}
FT_Close(ftHandle);
return 0;
}
uint32_t Marmote_GetFrequency(FT_HANDLE ftHandle)
{
uint32_t freq;
uint8_t dummy;
uint8_t rxBuffer[150];
PktHdr_t* pkt;
DWORD bytesRequested;
DWORD bytesReceived;
FT_STATUS ftStatus;
sendMsg(ftHandle, SDR, GET_FREQUENCY, &dummy, 0);
bytesRequested = sizeof(rxBuffer);
ftStatus = FT_Read(ftHandle, rxBuffer, bytesRequested, &bytesReceived);
if (ftStatus != FT_OK)
{
printf("readReg(): FT_Read failed\n");
return -1;
}
pkt = NULL;
printf("Read %4d chars: ", bytesReceived);
for (DWORD i = 0; i < bytesReceived; i++)
{
if (rxBuffer[i] == SYNC_CHAR_1)
{
pkt = (PktHdr_t*)(rxBuffer+i);
}
}
printf("\n");
if (!pkt)
{
// ERROR
return 0;
}
freq = *(uint32_t*)pkt->payload;
return freq;
}
static int presto_read(uint8_t *buf, uint32_t size)
{
#if BUILD_PRESTO_FTD2XX == 1
DWORD ftbytes;
presto->status = FT_Read(presto->handle, buf, size, &ftbytes);
if (presto->status != FT_OK) {
LOG_ERROR("FT_Read returned: %s", ftd2xx_status_string(presto->status));
return ERROR_JTAG_DEVICE_ERROR;
}
#elif BUILD_PRESTO_LIBFTDI == 1
uint32_t ftbytes = 0;
struct timeval timeout, now;
gettimeofday(&timeout, NULL);
timeval_add_time(&timeout, 1, 0); /* one second timeout */
while (ftbytes < size) {
presto->retval = ftdi_read_data(&presto->ftdic, buf + ftbytes, size - ftbytes);
if (presto->retval < 0) {
LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&presto->ftdic));
return ERROR_JTAG_DEVICE_ERROR;
}
ftbytes += presto->retval;
gettimeofday(&now, NULL);
if ((now.tv_sec > timeout.tv_sec) ||
((now.tv_sec == timeout.tv_sec) && (now.tv_usec > timeout.tv_usec)))
break;
}
#endif
if (ftbytes != size) {
/* this is just a warning, there might have been timeout when detecting PRESTO,
*which is not fatal */
LOG_WARNING("couldn't read the requested number of bytes from PRESTO (%u < %u)",
(unsigned)ftbytes, (unsigned)size);
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
/* returns -1 for timeout, else 0..255 */
int
serial_read(void)
{
struct timeval tv1, tv2;
long et, oet;
DWORD rv, stat;
unsigned char buf;
gettimeofday(&tv1, 0);
do {
stat = FT_Read (handle, &buf, 1, &rv);
if (rv == 0)
usleep (10);
gettimeofday(&tv2, 0);
et = tv2.tv_usec - tv1.tv_usec;
et += (tv2.tv_sec - tv1.tv_sec) * 1000000;
et /= 1000;
oet = et;
} while (stat == FT_OK
&& rv == 0
&& et < timeout_val);
if (stat != FT_OK)
{
printf("[read failed? %ld]", stat);
return -1;
}
if (rv == 0)
{
dprintf("[T]");
return -1;
}
if (verbose > 1)
{
if (isgraph(buf))
printf("\033[31m%c\033[0m", buf);
//else
printf("\033[35m%02x\033[0m ", buf);
fflush(stdout);
}
return buf;
}
/* Read buffer USB*/
quint16 ftdiChip::Read(QByteArray &buff)
{
FT_STATUS ftStatus;
DWORD numout,RxBytes;// RxBuf=NULL, TxBuf=NULL, EventStat;
//ftStatus=FT_GetStatus(hdUSB,&RxBuf,&TxBuf, &EventStat);
//do{
ftStatus=FT_GetQueueStatus(hdUSB,&RxBytes);
if(ftStatus==FT_OK){
if(RxBytes>0){ //чтение только если в приёмном буфере что то есть
QByteArray tmpbuff(RxBytes,0x00);
ftStatus=FT_Read(hdUSB,tmpbuff.data(),RxBytes,&numout);
if(ftStatus!=FT_OK)return retErr;
buff.append(tmpbuff);
}
else return retBusyDevice;
}else return retErr;
//}while(RxBytes);
return retOk;
}
//Just wraps the FT_Read function in a QueueStatus call so we don't block on reads
int nifalcon_read(falcon_device* dev, unsigned char* str, unsigned int size, unsigned int timeout_ms)
{
unsigned long bytes_rx, bytes_read = 0;
clock_t timeout = (clock_t)(((double)timeout_ms * .001) * (double)CLOCKS_PER_SEC) + clock();
if(!dev->is_open) nifalcon_error_return(NIFALCON_DEVICE_NOT_FOUND_ERROR, "tried to read from an unopened device");
while(bytes_read < size)
{
if((dev->falcon_status_code = FT_GetQueueStatus(dev->falcon, &bytes_rx)) != FT_OK) return -dev->falcon_status_code;
if(bytes_rx > size) bytes_rx = size - bytes_read;
if(bytes_rx > 0)
{
if((dev->falcon_status_code = FT_Read(dev->falcon, str, bytes_rx, &bytes_read)) != FT_OK) return -dev->falcon_status_code;
bytes_read += bytes_rx;
}
if (clock() > timeout) return bytes_read;
}
return bytes_read;
}
bool CMmcUsbHndlBase::ReadByte( unsigned char *pData, unsigned int *pDataRead)
{
if( !AreLibraryFunctionsLoaded() )
{
perror("Library not loaded");
return false;
}
FT_STATUS ftStatus = FT_Read(m_Handle, pData, 1, (DWORD*)pDataRead);
if( ftStatus != FT_OK )
{
std::string errormsg = GetFtStatusDescription(ftStatus);
errormsg += ":FT_SetUSBParameters";
perror(errormsg.c_str());
}
return (FT_OK == ftStatus);
}
int CKMotionIO::ReadBytesAvailable(char *RxBuffer, int maxbytes, DWORD *BytesReceived, int timeout_ms)
{
FT_STATUS ftStatus;
DWORD EventDWord;
DWORD RxBytes;
DWORD TxBytes;
Mutex->Lock();
ftStatus=FT_GetStatus(ftHandle,&RxBytes,&TxBytes,&EventDWord);
if (ftStatus != FT_OK)
{
Failed();
Mutex->Unlock();
return 1;
}
if ((int)RxBytes > maxbytes) RxBytes = maxbytes-1; // leave room for null
RxBuffer[0]=0; // set buf empty initially
*BytesReceived=0;
if (RxBytes > 0)
{
ftStatus = FT_Read(ftHandle,RxBuffer,RxBytes,BytesReceived);
if (ftStatus == FT_OK)
{
RxBuffer[*BytesReceived]=0; // null terminate
}
else
{
Failed();
Mutex->Unlock();
return 1;
}
}
Mutex->Unlock();
return 0;
}