C++ (Cpp) GEMINI_GPIO_BASEの例

コード例 #1

ファイル: main.c プロジェクト: janfj/dd-wrt

static inline void wbd222_wdt_setup(void)
{
#ifdef CONFIG_MACH_WBD222
        int val;

        val = __raw_readl(IO_ADDRESS(GEMINI_GPIO_BASE(0)) + 0x08);
        val |= 1 << 18;
        __raw_writel(val, IO_ADDRESS(GEMINI_GPIO_BASE(0)) + 0x08);
#endif
}

コード例 #2

ファイル: main.c プロジェクト: janfj/dd-wrt

static inline void wbd222_wdt_touch(void)
{
#ifdef CONFIG_MACH_WBD222
        int val;

        val = __raw_readl(IO_ADDRESS(GEMINI_GPIO_BASE(0)) + 0x00);
        if (val & 1 << 18)
                val &= ~(1 << 18);
        else
                val |= 1 << 18;

        __raw_writel(val, IO_ADDRESS(GEMINI_GPIO_BASE(0)) + 0x00);
#endif
}

コード例 #3

ファイル: mm.c プロジェクト: 0-T-0/ps4-linux

		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
		.pfn		= __phys_to_pfn(GEMINI_TIMER_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
		.pfn		= __phys_to_pfn(GEMINI_INTERRUPT_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
		.pfn		= __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(0)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(1)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(2)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),

コード例 #4

ファイル: mm.c プロジェクト: curbthepain/android_kernel_us990_rev

		.virtual	= IO_ADDRESS(GEMINI_TIMER_BASE),
		.pfn		= __phys_to_pfn(GEMINI_TIMER_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
		.pfn		= __phys_to_pfn(GEMINI_INTERRUPT_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
		.pfn		= __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(0)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(0)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(1)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(1)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(2)),
		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(2)),
		.length		= SZ_512K,
		.type 		= MT_DEVICE,
	}, {
		.virtual	= IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),