static void geode_wdog_disable(struct geode_wdog_softc *sc) { uint16_t wdcnfg; /* cancel any pending countdown */ sc->sc_countdown = 0; bus_space_write_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDTO, 0); /* power-down clock */ wdcnfg = bus_space_read_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDCNFG); GEODE_DPRINTF(("%s: wdcnfg %#04" PRIx16 " -> ", __func__, wdcnfg)); wdcnfg |= SC1100_WDCNFG_WD32KPD; wdcnfg &= ~(SC1100_WDCNFG_WDTYPE2_MASK | SC1100_WDCNFG_WDTYPE1_MASK); /* This no-op is for the reader's benefit. */ wdcnfg |= SC1100_WDCNFG_WDTYPE1_NOACTION | SC1100_WDCNFG_WDTYPE2_NOACTION; bus_space_write_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDCNFG, wdcnfg); GEODE_DPRINTF(("%#04" PRIx16 "\n", wdcnfg)); }
static void geode_gcb_attach(device_t parent, device_t self, void *aux) { struct geode_gcb_softc *sc = device_private(self); struct pci_attach_args *pa = aux; uint32_t cba; u_int rev; cba = pci_conf_read(pa->pa_pc, pa->pa_tag, SC1100_XBUS_CBA_SCRATCHPAD); sc->sc_iot = pa->pa_iot; if (bus_space_map(sc->sc_iot, (bus_addr_t)cba, SC1100_GCB_SIZE, 0, &sc->sc_ioh) != 0) { aprint_error(": unable to map registers\n"); return; } GEODE_DPRINTF(("%s: mapped %u bytes at %#08" PRIx32 "\n", device_xname(self), SC1100_GCB_SIZE, cba)); rev = bus_space_read_1(sc->sc_iot, sc->sc_ioh, SC1100_GCB_REV_B); aprint_naive("\n"); aprint_normal(": AMD Geode GCB (rev. 0x%02x)\n", rev); while (config_found(self, NULL, NULL) != NULL) /* empty */; }
static int geode_wdog_setmode(struct sysmon_wdog *smw) { struct geode_wdog_softc *sc = smw->smw_cookie; uint32_t ticks; int prescale, s; if ((smw->smw_mode & WDOG_MODE_MASK) == WDOG_MODE_DISARMED) { s = splhigh(); geode_wdog_disable(sc); splx(s); return 0; } if (smw->smw_period == WDOG_PERIOD_DEFAULT) smw->smw_period = 32; else if (smw->smw_period > SC1100_WDIVL_MAX) /* too big? */ return EINVAL; GEODE_DPRINTF(("%s: period %u\n", __func__, smw->smw_period)); ticks = smw->smw_period * SC1100_WDCLK_HZ; GEODE_DPRINTF(("%s: ticks0 %" PRIu32 "\n", __func__, ticks)); for (prescale = 0; ticks > UINT16_MAX; prescale++) ticks /= 2; GEODE_DPRINTF(("%s: ticks %" PRIu32 "\n", __func__, ticks)); GEODE_DPRINTF(("%s: prescale %d\n", __func__, prescale)); KASSERT(prescale <= SC1100_WDCNFG_WDPRES_MAX); KASSERT(ticks <= UINT16_MAX); s = splhigh(); sc->sc_prescale = (uint8_t)prescale; sc->sc_countdown = (uint16_t)ticks; geode_wdog_enable(sc); geode_wdog_reset(sc); splx(s); return 0; }
static void geode_wdog_enable(struct geode_wdog_softc *sc) { uint16_t wdcnfg; /* power-up clock and set prescale */ wdcnfg = bus_space_read_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDCNFG); GEODE_DPRINTF(("%s: wdcnfg %#04" PRIx16 " -> ", __func__, wdcnfg)); wdcnfg &= ~(SC1100_WDCNFG_WD32KPD | SC1100_WDCNFG_WDPRES_MASK | SC1100_WDCNFG_WDTYPE1_MASK | SC1100_WDCNFG_WDTYPE2_MASK); wdcnfg |= __SHIFTIN(sc->sc_prescale, SC1100_WDCNFG_WDPRES_MASK); wdcnfg |= SC1100_WDCNFG_WDTYPE1_RESET | SC1100_WDCNFG_WDTYPE2_NOACTION; bus_space_write_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDCNFG, wdcnfg); GEODE_DPRINTF(("%#04" PRIx16 "\n", wdcnfg)); }
static void geode_wdog_attach(device_t parent, device_t self, void *aux) { struct geode_wdog_softc *sc = device_private(self); uint8_t wdsts; aprint_naive(": Watchdog Timer\n"); aprint_normal(": AMD Geode SC1100 Watchdog Timer\n"); /* * Hook up the watchdog timer. */ sc->sc_gcb_dev = device_private(parent); sc->sc_smw.smw_name = device_xname(self); sc->sc_smw.smw_cookie = sc; sc->sc_smw.smw_setmode = geode_wdog_setmode; sc->sc_smw.smw_tickle = geode_wdog_tickle; sc->sc_smw.smw_period = 32; /* * Determine cause of the last reset, and issue a warning if it * was due to watchdog expiry. */ wdsts = bus_space_read_1(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDSTS); GEODE_DPRINTF(("%s: status %#02" PRIx8 "\n", device_xname(self), wdsts)); if (wdsts & SC1100_WDSTS_WDRST) aprint_error( "%s: WARNING: LAST RESET DUE TO WATCHDOG EXPIRATION!\n", device_xname(self)); /* reset WDOVF by writing 1 to it */ bus_space_write_1(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh, SC1100_GCB_WDSTS, wdsts & SC1100_WDSTS_WDOVF); if (sysmon_wdog_register(&sc->sc_smw) != 0) aprint_error("%s: unable to register watchdog with sysmon\n", device_xname(self)); /* cancel any pending countdown */ geode_wdog_disable(sc); attached = 1; }