/*
* Stops transfer processing for an endpoint and throws away all unprocessed
* TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
* xhci_bulk_tx/xhci_ctrl_tx on this enpoint will add new transfers there and
* ring the doorbell, causing this endpoint to start working again.
* (Careful: This will BUG() when there was no transfer in progress. Shouldn't
* happen in practice for current uses and is too complicated to fix right now.)
*/
static void abort_td(struct usb_device *udev, int ep_index)
{
struct xhci_ctrl *ctrl = udev->controller;
struct xhci_ring *ring = ctrl->devs[udev->slot_id]->eps[ep_index].ring;
union xhci_trb *event;
u32 field;
xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_STOP_RING);
event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
field = le32_to_cpu(event->trans_event.flags);
BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
BUG_ON(GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len
!= COMP_STOP)));
xhci_acknowledge_event(ctrl);
event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
event->event_cmd.status)) != COMP_SUCCESS);
xhci_acknowledge_event(ctrl);
xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
event->event_cmd.status)) != COMP_SUCCESS);
xhci_acknowledge_event(ctrl);
}
static void record_transfer_result(struct usb_device *udev,
union xhci_trb *event, int length)
{
udev->act_len = min(length, length -
EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
case COMP_SUCCESS:
BUG_ON(udev->act_len != length);
/* fallthrough */
case COMP_SHORT_TX:
udev->status = 0;
break;
case COMP_STALL:
udev->status = USB_ST_STALLED;
break;
case COMP_DB_ERR:
case COMP_TRB_ERR:
udev->status = USB_ST_BUF_ERR;
break;
case COMP_BABBLE:
udev->status = USB_ST_BABBLE_DET;
break;
default:
udev->status = 0x80; /* USB_ST_TOO_LAZY_TO_MAKE_A_NEW_MACRO */
}
}
/**
* Waits for a specific type of event and returns it. Discards unexpected
* events. Caller *must* call xhci_acknowledge_event() after it is finished
* processing the event, and must not access the returned pointer afterwards.
*
* @param ctrl Host controller data structure
* @param expected TRB type expected from Event TRB
* @return pointer to event trb
*/
union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
{
trb_type type;
unsigned long ts = get_timer(0);
int retry = 50;
try_again:
do {
union xhci_trb *event = ctrl->event_ring->dequeue;
if (!event_ready(ctrl))
continue;
type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
if (type == expected)
return event;
if (type == TRB_PORT_STATUS) {
/* TODO: remove this once enumeration has been reworked */
/*
* Port status change events always have a
* successful completion code
*/
BUG_ON(GET_COMP_CODE(
le32_to_cpu(event->generic.field[2])) !=
COMP_SUCCESS);
}
else
printf("Unexpected XHCI event TRB, skipping... "
"(%08x %08x %08x %08x)\n",
le32_to_cpu(event->generic.field[0]),
le32_to_cpu(event->generic.field[1]),
le32_to_cpu(event->generic.field[2]),
le32_to_cpu(event->generic.field[3]));
xhci_acknowledge_event(ctrl);
} while (get_timer(ts) < (XHCI_TIMEOUT * 50000));
//} while (1);
retry--;
if (retry > 0)
goto try_again;
if (expected == TRB_TRANSFER)
return NULL;
printf("\n\n\nXHCI timeout on event type %d... cannot recover.\n\n\n", expected);
BUG();
}
/**
* Debug a transfer request block (TRB).
*/
void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
{
u64 address;
u32 type = le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK;
switch (type) {
case TRB_TYPE(TRB_LINK):
xhci_dbg(xhci, "Link TRB:\n");
xhci_print_trb_offsets(xhci, trb);
address = le64_to_cpu(trb->link.segment_ptr);
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
GET_INTR_TARGET(le32_to_cpu(trb->link.intr_target)));
xhci_dbg(xhci, "Cycle bit = %u\n",
le32_to_cpu(trb->link.control) & TRB_CYCLE);
xhci_dbg(xhci, "Toggle cycle bit = %u\n",
le32_to_cpu(trb->link.control) & LINK_TOGGLE);
xhci_dbg(xhci, "No Snoop bit = %u\n",
le32_to_cpu(trb->link.control) & TRB_NO_SNOOP);
break;
case TRB_TYPE(TRB_TRANSFER):
address = le64_to_cpu(trb->trans_event.buffer);
/*
* FIXME: look at flags to figure out if it's an address or if
* the data is directly in the buffer field.
*/
xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
break;
case TRB_TYPE(TRB_COMPLETION):
address = le64_to_cpu(trb->event_cmd.cmd_trb);
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status)));
xhci_dbg(xhci, "Flags = 0x%x\n",
le32_to_cpu(trb->event_cmd.flags));
break;
default:
xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
(unsigned int) type>>10);
xhci_print_trb_offsets(xhci, trb);
break;
}
}
/**
* Queues up the Control Transfer Request
*
* @param udev pointer to the USB device structure
* @param pipe contains the DIR_IN or OUT , devnum
* @param req request type
* @param length length of the buffer
* @param buffer buffer to be read/written based on the request
* @return returns 0 if successful else error code on failure
*/
int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
struct devrequest *req, int length,
void *buffer)
{
int ret;
int start_cycle;
int num_trbs;
u32 field;
u32 length_field;
u64 buf_64 = 0;
struct xhci_generic_trb *start_trb;
struct xhci_ctrl *ctrl = udev->controller;
int slot_id = udev->slot_id;
int ep_index;
u32 trb_fields[4];
struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
struct xhci_ring *ep_ring;
union xhci_trb *event;
XHCI_RING_PRINTF("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
req->request, req->request,
req->requesttype, req->requesttype,
le16_to_cpu(req->value), le16_to_cpu(req->value),
le16_to_cpu(req->index));
ep_index = usb_pipe_ep_index(pipe);
ep_ring = virt_dev->eps[ep_index].ring;
/*
* Check to see if the max packet size for the default control
* endpoint changed during FS device enumeration
*/
if (udev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(udev);
if (ret < 0)
return ret;
}
xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
virt_dev->out_ctx->size);
struct xhci_ep_ctx *ep_ctx = NULL;
ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
/* 1 TRB for setup, 1 for status */
num_trbs = 2;
/*
* Don't need to check if we need additional event data and normal TRBs,
* since data in control transfers will never get bigger than 16MB
* XXX: can we get a buffer that crosses 64KB boundaries?
*/
if (length > 0)
num_trbs++;
/*
* XXX: Calling routine prepare_ring() called in place of
* prepare_trasfer() as there in 'Linux' since we are not
* maintaining multiple TDs/transfer at the same time.
*/
ret = prepare_ring(ctrl, ep_ring,
le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
if (ret < 0)
return ret;
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
* state may change as we enqueue the other TRBs, so save it too.
*/
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
XHCI_RING_PRINTF("start_trb %p, start_cycle %d\n", start_trb, start_cycle);
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
field = 0;
field |= TRB_IDT | (TRB_SETUP << TRB_TYPE_SHIFT);
if (start_cycle == 0)
field |= 0x1;
/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
//if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) == 0x100) {
// XHCI_MTK
if (1) {
if (length > 0) {
if (req->requesttype & USB_DIR_IN)
field |= (TRB_DATA_IN << TRB_TX_TYPE_SHIFT);
else
field |= (TRB_DATA_OUT << TRB_TX_TYPE_SHIFT);
}
}
XHCI_RING_PRINTF("req->requesttype = %d, req->request = %d,"
"le16_to_cpu(req->value) = %d,"
"le16_to_cpu(req->index) = %d,"
"le16_to_cpu(req->length) = %d\n",
req->requesttype, req->request, le16_to_cpu(req->value),
le16_to_cpu(req->index), le16_to_cpu(req->length));
trb_fields[0] = req->requesttype | req->request << 8 |
le16_to_cpu(req->value) << 16;
trb_fields[1] = le16_to_cpu(req->index) |
le16_to_cpu(req->length) << 16;
/* TRB_LEN | (TRB_INTR_TARGET) */
trb_fields[2] = (8 | ((0 & TRB_INTR_TARGET_MASK) <<
TRB_INTR_TARGET_SHIFT));
/* Immediate data in pointer */
trb_fields[3] = field;
queue_trb(ctrl, ep_ring, true, trb_fields);
/* Re-initializing field to zero */
field = 0;
/* If there's data, queue data TRBs */
/* Only set interrupt on short packet for IN endpoints */
if (usb_pipein(pipe))
field = TRB_ISP | (TRB_DATA << TRB_TYPE_SHIFT);
else
field = (TRB_DATA << TRB_TYPE_SHIFT);
length_field = (length & TRB_LEN_MASK) | 0 |
//length_field = (length & TRB_LEN_MASK) | xhci_td_remainder(length) |
((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
//XHCI_RING_PRINTF("length_field = %d, length = %d,"
// "xhci_td_remainder(length) = %d , TRB_INTR_TARGET(0) = %d\n",
// length_field, (length & TRB_LEN_MASK),
// xhci_td_remainder(length), 0);
if (length > 0) {
if (req->requesttype & USB_DIR_IN)
field |= TRB_DIR_IN;
buf_64 = (uintptr_t)buffer;
trb_fields[0] = lower_32_bits(buf_64);
trb_fields[1] = upper_32_bits(buf_64);
trb_fields[2] = length_field;
trb_fields[3] = field | ep_ring->cycle_state;
xhci_flush_cache((uint32_t)buffer, length);
queue_trb(ctrl, ep_ring, true, trb_fields);
}
/*
* Queue status TRB -
* see Table 7 and sections 4.11.2.2 and 6.4.1.2.3
*/
/* If the device sent data, the status stage is an OUT transfer */
field = 0;
if (length > 0 && req->requesttype & USB_DIR_IN)
field = 0;
else
field = TRB_DIR_IN;
trb_fields[0] = 0;
trb_fields[1] = 0;
trb_fields[2] = ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
/* Event on completion */
trb_fields[3] = field | TRB_IOC |
(TRB_STATUS << TRB_TYPE_SHIFT) |
ep_ring->cycle_state;
queue_trb(ctrl, ep_ring, false, trb_fields);
giveback_first_trb(udev, ep_index, start_cycle, start_trb);
event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
if (!event)
goto abort;
field = le32_to_cpu(event->trans_event.flags);
BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
record_transfer_result(udev, event, length);
xhci_acknowledge_event(ctrl);
/* Invalidate buffer to make it available to usb-core */
if (length > 0)
xhci_inval_cache((uint32_t)buffer, length);
if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))
== COMP_SHORT_TX) {
/* Short data stage, clear up additional status stage event */
event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
if (!event)
goto abort;
BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
xhci_acknowledge_event(ctrl);
}
return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
abort:
XHCI_RING_PRINTF("XHCI control transfer timed out, aborting...\n");
abort_td(udev, ep_index);
udev->status = USB_ST_NAK_REC;
udev->act_len = 0;
return -ETIMEDOUT;
}
/**
* Debug a transfer request block (TRB).
*/
void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
{
u64 address;
#if 0 /* original code */
u32 type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
#else /* 2010/6/28,2010/7/16 modified by Panasonic for little-endian
access to the data structures in host memory */
u32 type = xhci_desc_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
#endif
switch (type) {
case TRB_TYPE(TRB_LINK):
xhci_dbg(xhci, "Link TRB:\n");
xhci_print_trb_offsets(xhci, trb);
#if 0 /* original code */
address = trb->link.segment_ptr;
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
GET_INTR_TARGET(trb->link.intr_target));
xhci_dbg(xhci, "Cycle bit = %u\n",
(unsigned int) (trb->link.control & TRB_CYCLE));
xhci_dbg(xhci, "Toggle cycle bit = %u\n",
(unsigned int) (trb->link.control & LINK_TOGGLE));
xhci_dbg(xhci, "No Snoop bit = %u\n",
(unsigned int) (trb->link.control & TRB_NO_SNOOP));
#else /* 2010/6/28,2010/7/16 modified by Panasonic for little-endian
access to the data structures in host memory */
address = xhci_desc_read_64(xhci, &trb->link.segment_ptr);
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
GET_INTR_TARGET(xhci_desc_readl(xhci, &trb->link.intr_target)));
xhci_dbg(xhci, "Cycle bit = %u\n",
(unsigned int) (xhci_desc_readl(xhci, &trb->link.control) & TRB_CYCLE));
xhci_dbg(xhci, "Toggle cycle bit = %u\n",
(unsigned int) (xhci_desc_readl(xhci, &trb->link.control) & LINK_TOGGLE));
xhci_dbg(xhci, "No Snoop bit = %u\n",
(unsigned int) (xhci_desc_readl(xhci, &trb->link.control) & TRB_NO_SNOOP));
#endif
break;
case TRB_TYPE(TRB_TRANSFER):
#if 0 /* original code */
address = trb->trans_event.buffer;
#else /* 2010/6/28,2010/7/16 modified by Panasonic for little-endian
access to the data structures in host memory */
address = xhci_desc_read_64(xhci, &trb->trans_event.buffer);
#endif
/*
* FIXME: look at flags to figure out if it's an address or if
* the data is directly in the buffer field.
*/
xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
break;
case TRB_TYPE(TRB_COMPLETION):
#if 0 /* original code */
address = trb->event_cmd.cmd_trb;
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
#else /* 2010/6/28,2010/7/16 modified by Panasonic for little-endian
access to the data structures in host memory */
address = xhci_desc_read_64(xhci, &trb->event_cmd.cmd_trb);
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
(unsigned int) GET_COMP_CODE(xhci_desc_readl(xhci, &trb->event_cmd.status)));
xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) xhci_desc_readl(xhci, &trb->event_cmd.flags));
#endif
break;
default:
xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
(unsigned int) type>>10);
xhci_print_trb_offsets(xhci, trb);
break;
}
}
