static inline int _gpio_setup_bank_bit(cmd_t *op)
{
switch (op->bank) {
case 'a': //bank a
op->bank = GPIOA_bank_bit0_27(0);
if (op->bit < 28) { //bit0..27
op->bit = GPIOA_bit_bit0_27(op->bit);
} else {
return -1;
}
break;
case 'b': //bank b
op->bank = GPIOB_bank_bit0_23(0);
if (op->bit < 24) { //bit0..23
op->bit = GPIOB_bit_bit0_23(op->bit);
} else {
return -1;
}
break;
case 'c': //bank c
op->bank = GPIOC_bank_bit0_15(0);
if (op->bit < 16) { //bit0..15
op->bit = GPIOC_bit_bit0_15(op->bit);
} else {
return -1;
}
break;
case 'd': //bank d
op->bank = GPIOD_bank_bit0_9(0);
if (op->bit < 10) { //bit0..9
op->bit = GPIOD_bit_bit0_9(op->bit);
} else {
return -1;
}
break;
case 'x': //bank x
if (op->bit < 32) { //bit0..31 ,bit no change .
op->bank = GPIOX_bank_bit0_31(0); //bit 0..15 16..21 share one bank
} else if (op->bit <36) { //bit 32..35
op->bank = GPIOX_bank_bit32_35(0);
op->bit = GPIOX_bit_bit32_35(op->bit);
} else {
return -1;
}
break;
case 'y': //bank y
if (op->bit < 23) { //bit0..22 ,bit no change .
op->bank = GPIOY_bank_bit0_22(0); //bit 0..15 16..21 share one bank
} else {
return -1;
}
break;
case 'o': //bank ao
if (op->bit < 12) { //bit0..11 ,bit no change .
op->bank = GPIOAO_bank_bit0_11(0); //bit 0..11
op->bit = GPIOAO_bit_bit0_11(op->bit);
} else {
return -1;
}
break;
/* FIXME AO/BOOT/CARD GPIO can not controle todo */
default:
printk("GPIO, invalid selection.\n");
return -1;
}
return 0;
}
.name = "frontend0_demod_addr"
},
[2] = {
.start = (GPIOD_bank_bit0_9(8)<<16)|GPIOD_bit_bit0_9(8), //reset pin
.end = (GPIOD_bank_bit0_9(8)<<16)|GPIOD_bit_bit0_9(8),
.flags = IORESOURCE_MEM,
.name = "frontend0_reset_pin"
},
[3] = {
.start = 0, //reset enable value
.end = 0,
.flags = IORESOURCE_MEM,
.name = "frontend0_reset_value_enable"
},
[4] = {
.start = (GPIOB_bank_bit0_23(23)<<16)|GPIOB_bit_bit0_23(23), //DVBS2 LNBON/OFF pin
.end = (GPIOB_bank_bit0_23(23)<<16)|GPIOB_bit_bit0_23(23),
.flags = IORESOURCE_MEM,
.name = "frontend0_LNBON/OFF"
},
[5] = {
.start = 0xc0, //is avl6211
.end = 0xc0,
.flags = IORESOURCE_MEM,
.name = "frontend0_tuner_addr"
},
[6] = {
.start = (GPIOB_bank_bit0_23(21)<<16)|GPIOB_bit_bit0_23(21), //is avl6211
.end = (GPIOB_bank_bit0_23(21)<<16)|GPIOB_bit_bit0_23(21),
.flags = IORESOURCE_MEM,
.name = "frontend0_POWERON/OFF"
