/*******************************************************************************
* Function Name: WaveDAC_0_Low_Wave2Setup
********************************************************************************
*
* Summary:
* Sets pointer and size for waveform 2.
*
* Parameters:
* uint8 * WavePtr: Pointer to the waveform array.
* uint16 SampleSize: The amount of samples in the waveform.
*
* Return:
* None
*
*******************************************************************************/
void WaveDAC_0_Low_Wave2Setup(const uint8 * wavePtr, uint16 sampleSize)
{
#if (CY_PSOC3)
uint16 memoryType; /* determining the source memory type */
memoryType = (WaveDAC_0_Low_HI16FLASHPTR == HI16(wavePtr)) ? HI16(CYDEV_FLS_BASE) : HI16(CYDEV_SRAM_BASE);
WaveDAC_0_Low_Wave2Chan = WaveDAC_0_Low_Wave2_DMA_DmaInitialize(
WaveDAC_0_Low_Wave2_DMA_BYTES_PER_BURST, WaveDAC_0_Low_Wave2_DMA_REQUEST_PER_BURST,
memoryType, HI16(CYDEV_PERIPH_BASE));
#else /* PSoC 5 */
WaveDAC_0_Low_Wave2Chan = WaveDAC_0_Low_Wave2_DMA_DmaInitialize(
WaveDAC_0_Low_Wave2_DMA_BYTES_PER_BURST, WaveDAC_0_Low_Wave2_DMA_REQUEST_PER_BURST,
HI16(wavePtr), HI16(WaveDAC_0_Low_DAC8__D));
#endif /* CY_PSOC3 */
/*
* TD is looping on itself.
* Increment the source address, but not the destination address.
*/
(void)CyDmaTdSetConfiguration(WaveDAC_0_Low_Wave2TD, sampleSize, WaveDAC_0_Low_Wave2TD,
(uint8)CY_DMA_TD_INC_SRC_ADR | (uint8)WaveDAC_0_Low_Wave2_DMA__TD_TERMOUT_EN);
/* Set the TD source and destination address */
(void)CyDmaTdSetAddress(WaveDAC_0_Low_Wave2TD, LO16((uint32)wavePtr), LO16(WaveDAC_0_Low_DAC8__D));
/* Associate the TD with the channel */
(void)CyDmaChSetInitialTd(WaveDAC_0_Low_Wave2Chan, WaveDAC_0_Low_Wave2TD);
}
static void scsiPhyInitDMA()
{
// One-time init only.
if (scsiDmaTxChan == CY_DMA_INVALID_CHANNEL)
{
scsiDmaRxChan =
SCSI_RX_DMA_DmaInitialize(
1, // Bytes per burst
1, // request per burst
HI16(CYDEV_PERIPH_BASE),
HI16(CYDEV_SRAM_BASE)
);
scsiDmaTxChan =
SCSI_TX_DMA_DmaInitialize(
1, // Bytes per burst
1, // request per burst
HI16(CYDEV_SRAM_BASE),
HI16(CYDEV_PERIPH_BASE)
);
CyDmaChDisable(scsiDmaRxChan);
CyDmaChDisable(scsiDmaTxChan);
scsiDmaRxTd[0] = CyDmaTdAllocate();
scsiDmaTxTd[0] = CyDmaTdAllocate();
SCSI_RX_DMA_COMPLETE_StartEx(scsiRxCompleteISR);
SCSI_TX_DMA_COMPLETE_StartEx(scsiTxCompleteISR);
}
}
void DmaTxConfiguration(void)
{
uint8 i;
/* Initialize DMA channel. */
TxOutDmaCh = TxDma_DmaInitialize(TX_DMA_BYTES_PER_BURST, TX_DMA_REQUEST_PER_BURST,
HI16(TX_DMA_SRC_BASE), HI16(TX_DMA_DST_BASE));
/* Allocate transfer descriptors for each buffer chunk. */
for (i = 0u; i < NUM_OF_BUFFERS; ++i)
{
TxOutDmaTd[i] = CyDmaTdAllocate();
}
/* Configure DMA transfer descriptors. */
for (i = 0u; i < (NUM_OF_BUFFERS - 1u); ++i)
{
/* Chain current and next DMA transfer descriptors to be in row. */
CyDmaTdSetConfiguration(TxOutDmaTd[i], TRANSFER_SIZE, TxOutDmaTd[i + 1u],
TD_INC_SRC_ADR);
}
/* Chain last and 1st DMA transfer descriptors to make cyclic buffer. */
CyDmaTdSetConfiguration(TxOutDmaTd[NUM_OF_BUFFERS - 1u], TRANSFER_SIZE, TxOutDmaTd[0u],
TD_INC_SRC_ADR);
for (i = 0u; i < NUM_OF_BUFFERS; i++)
{
/* Set source and destination addresses. */
CyDmaTdSetAddress(TxOutDmaTd[i], LO16((uint32) &soundBuffer[i * TRANSFER_SIZE]),
LO16((uint32) I2S_1_TX_CH0_F0_PTR));
}
/* Set 1st transfer descriptor to execute. */
CyDmaChSetInitialTd(TxOutDmaCh, TxOutDmaTd[0u]);
}
void dcbInitThunk(DCThunk* p, void (*entry)())
{
#if DC__ABI_PPC64_ELF_V != 2
/*
ppc64 thunk code: (v1)
oris r11, r2, HI16(p)
ori r11,r11, LO16(p)
ld r12,48(r11)
ld r2,56(r11)
mtctr r12
bctr
*/
p->thunk_entry = (void *)&(p->code_load_hi);
p->toc_thunk = ((long)(p->thunk_entry) & 0xffffffff00000000UL);
p->code_load_hi = 0x644bU; /* oris r11, r2, HI16(p) */
p->addr_self_hi = HI16(p);
p->code_load_lo = 0x616bU; /* ori r11,r11, LO16(p) */
p->addr_self_lo = LO16(p);
p->code_jump[0] = 0xe98b0030U; /* ld r12,48(r11) */
p->code_jump[1] = 0xe84b0038U; /* ld r2,56(r11) */
p->code_jump[2] = 0x7d8903a6U; /* mtclr r12 */
p->code_jump[3] = 0x4e800420U; /* bctr */
p->addr_entry = (void *)*((long *)entry);
p->toc_entry = *((long *)(entry + 8));
#else
/*
ppc64 thunk code: (v2)
lis r11, HIST16(p)
ori r11,r11, HIER16(p)
rldicr r11,r11,32,31
oris r11,r11, HI16(p)
ori r11,r11, LO16(p)
ld r12,40(r11)
mtctr r12
bctr
*/
p->code_load_hist = 0x3d60U; /* lis r11,HIST16(p) */
p->addr_self_hist = HIST16(p);
p->code_load_hier = 0x616bU; /* ori r11,r11, HIER16(p) */
p->addr_self_hier = HIER16(p);
p->code_rot = 0x796b07c6U; /* rldicr r11,r11,32,31 */
p->code_load_hi = 0x656bU; /* oris r11,r11, HI16(p) */
p->addr_self_hi = HI16(p);
p->code_load_lo = 0x616bU; /* ori r11,r11, LO16(p) */
p->addr_self_lo = LO16(p);
p->code_jump[0] = 0xe98b0028U; /* ld r12,40(r11) */
p->code_jump[1] = 0x7d8903a6U; /* mtclr r12 */
p->code_jump[2] = 0x4e800420U; /* bctr */
p->addr_entry = (void *)(entry);
#endif
}
void Configure_DMA(){
ADC2Filter_DMA_Chan = ADC2Filter_DMA_DmaInitialize(ADC2Filter_DMA_BYTES_PER_BURST, ADC2Filter_DMA_REQUEST_PER_BURST,
HI16(ADC2Filter_DMA_SRC_BASE), HI16(ADC2Filter_DMA_DST_BASE));
ADC2Filter_DMA_TD[0] = CyDmaTdAllocate();
ADC2Filter_DMA_TD[1] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(ADC2Filter_DMA_TD[0], 2, ADC2Filter_DMA_TD[1], TD_AUTO_EXEC_NEXT);
CyDmaTdSetConfiguration(ADC2Filter_DMA_TD[1], 2, ADC2Filter_DMA_TD[0], ADC2Filter_DMA__TD_TERMOUT_EN);
CyDmaTdSetAddress(ADC2Filter_DMA_TD[0], LO16((uint32)ADC_DelSig_1_DEC_SAMP_PTR), LO16((uint32)Filter_STAGEA_PTR));
CyDmaTdSetAddress(ADC2Filter_DMA_TD[1], LO16((uint32)ADC_DelSig_1_DEC_SAMP_PTR), LO16((uint32)Filter_STAGEB_PTR));
CyDmaChSetInitialTd(ADC2Filter_DMA_Chan, ADC2Filter_DMA_TD[0]);
CyDmaChEnable(ADC2Filter_DMA_Chan, 1);
/*Second buffer*/
DMA_2_Chan = DMA_2_DmaInitialize(DMA_2_BYTES_PER_BURST, DMA_2_REQUEST_PER_BURST,
HI16(DMA_2_SRC_BASE), HI16(DMA_2_DST_BASE));
DMA_2_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_2_TD[0], buffersize, CY_DMA_DISABLE_TD /* DMA_2_TD[0]*/, DMA_2__TD_TERMOUT_EN | TD_INC_SRC_ADR | TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_2_TD[0], LO16((uint32)ADC_samples), LO16((uint32)Buffer_samples));
CyDmaChSetInitialTd(DMA_2_Chan, DMA_2_TD[0]);
CyDmaChEnable(DMA_2_Chan, 1);
/*First buffer*/
DMA_1_Chan = DMA_1_DmaInitialize(DMA_1_BYTES_PER_BURST, DMA_1_REQUEST_PER_BURST,
HI16(DMA_1_SRC_BASE), HI16(DMA_1_DST_BASE));
DMA_1_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_1_TD[0], buffersize,/* CY_DMA_DISABLE_TD*/ DMA_1_TD[0], DMA_1__TD_TERMOUT_EN | TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_1_TD[0], LO16((uint32)Filter_HOLDA_PTR), LO16((uint32)ADC_samples));
CyDmaChSetInitialTd(DMA_1_Chan, DMA_1_TD[0]);
CyDmaChEnable(DMA_1_Chan, 1);
DMA_3_Chan = DMA_3_DmaInitialize(DMA_3_BYTES_PER_BURST, DMA_3_REQUEST_PER_BURST,
HI16(DMA_3_SRC_BASE), HI16(DMA_3_DST_BASE));
DMA_3_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_3_TD[0], buffersize, DMA_3_TD[0], DMA_3__TD_TERMOUT_EN | TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_3_TD[0], LO16((uint32)Filter_HOLDB_PTR), LO16((uint32)LPF_samples));
CyDmaChSetInitialTd(DMA_3_Chan, DMA_3_TD[0]);
CyDmaChEnable(DMA_3_Chan, 1);
DMA_4_Chan = DMA_4_DmaInitialize(DMA_4_BYTES_PER_BURST, DMA_4_REQUEST_PER_BURST,
HI16(DMA_4_SRC_BASE), HI16(DMA_4_DST_BASE));
DMA_4_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_4_TD[0], buffersize, CY_DMA_DISABLE_TD /*DMA_4_TD[0]*/, DMA_4__TD_TERMOUT_EN | TD_INC_SRC_ADR | TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_4_TD[0], LO16((uint32)LPF_samples), LO16((uint32)LPF_buffer));
CyDmaChSetInitialTd(DMA_4_Chan, DMA_4_TD[0]);
CyDmaChEnable(DMA_4_Chan, 1);
}
/*******************************************************************************
* Function Name: AuxDetection_Initialization
********************************************************************************
* Summary:
* This routine sets up the DMA path for obtaining the AUX I2S data in
* SRAM buffer for comparing.
*
* Parameters:
* void
*
* Return:
* void
*
*******************************************************************************/
void AuxDetection_Initialization(void)
{
uint16 index;
I2SRxMDAChan = I2S_Rx_DMA_DmaInitialize(1, 1, HI16(CYDEV_PERIPH_BASE),HI16(CYDEV_SRAM_BASE));
auxDMA_Td = CyDmaTdAllocate();
CyDmaTdSetConfiguration(auxDMA_Td, AUX_TD_SIZE, auxDMA_Td, TD_INC_DST_ADR | auxTermOut);
CyDmaTdSetAddress(auxDMA_Td, (uint16)(I2S_RX_FIFO_0_PTR), (uint16)auxBuffer );
CyDmaChSetInitialTd(I2SRxMDAChan, auxDMA_Td);
for(index = 0; index < AUX_TD_SIZE; index++)
{
auxBuffer[index] = 0;
}
}
void setupType0Adv()
{
advPacket0 *ap;
ap = (advPacket0 *)&cyBle_discoveryModeInfo.advData->advData[ADVINDEX];
// packet type + LSM9Setting
ap->setup = ADVPACKET0 | (LSM9DS0GetSetting()<<2);
// fix this
ap->tb0 =LO8(systime);
ap->tb1 =HI8(LO16(systime));
ap->tb2 =LO8(HI16(systime));
// position // if it is a uint16 it causes some unhandled exception
uint16 val= QD_ReadCounter();
ap->position = val;
// acceleration x,y,z
memcpy(&ap->accel , LSM9DS0GetAccel(), 6); // sizeof(LSM9DS0DATA));
// gyro x,y,z
memcpy(&ap->gyro , LSM9DS0GetGyro(),6 ); // sizeof(LSM9DS0DATA));
// mag x,y,z
memcpy(&ap->mag , LSM9DS0GetMag(),6); //sizeof(LSM9DS0DATA));
CyBle_GapUpdateAdvData(cyBle_discoveryModeInfo.advData, cyBle_discoveryModeInfo.scanRspData);
}
void `$INSTANCE_NAME`_Start() {
uint8* DMA_TD = (uint8*)`$INSTANCE_NAME`_DMA_TD;
uint8 numTD = `$INSTANCE_NAME`_numTD;
uint8* pwm_data_ptr = ((uint8*)&`$INSTANCE_NAME`_PWM_data) + 0x40;
uint8* dc_data_ptr = (uint8*)&`$INSTANCE_NAME`_PWM_data;
uint8 i,j,k;
for (i=0; i<4; i++)
for (j=0; j<8; j++)
`$INSTANCE_NAME`_PWM_data.dc[i][j] = 0;
for (i=0; i<4; i++)
for (j=0; j<16; j++)
`$INSTANCE_NAME`_PWM_data.pwm[i][j] = 0;
uint8 interruptState;
interruptState = CyEnterCriticalSection();
*(reg8*)`$INSTANCE_NAME`_C_TLC5940_WordCounter__CONTROL_AUX_CTL_REG |= 0x20u;
*(reg8*)`$INSTANCE_NAME`_C_TLC5940_BitCounter__CONTROL_AUX_CTL_REG |= 0x20u;
*(reg8*)`$INSTANCE_NAME`_C_TLC5940_WordCounter__PERIOD_REG = 0x08;
*(reg8*)`$INSTANCE_NAME`_C_TLC5940_gsclk_counter_GSCLKCounter_u0__D1_REG = 0x04;
`$INSTANCE_NAME`_DP_AUX_0 |= 5;
`$INSTANCE_NAME`_DP_AUX_1 |= 5;
`$INSTANCE_NAME`_DP_AUX_0 &= ~0x01;
`$INSTANCE_NAME`_DP_AUX_1 &= ~0x01;
CyExitCriticalSection(interruptState);
`$INSTANCE_NAME`_DMA_Chan = `$INSTANCE_NAME`_DMA_DmaInitialize(`$INSTANCE_NAME`_DMA_BYTES_PER_BURST, `$INSTANCE_NAME`_DMA_REQUEST_PER_BURST,
HI16(`$INSTANCE_NAME`_DMA_SRC_BASE), HI16(`$INSTANCE_NAME`_DMA_DST_BASE));
for (i = 0; i < numTD; i++)
DMA_TD[i] = CyDmaTdAllocate();
for (i = 0; i < numTD; i++) {
CyDmaTdSetConfiguration(DMA_TD[i], 16, DMA_TD[(i+1)%numTD], TD_TERMIN_EN | `$INSTANCE_NAME`_DMA__TD_TERMOUT_EN | TD_INC_SRC_ADR);
}
for (i = 0; i < 4; i++) {
CyDmaTdSetAddress(DMA_TD[i*3], LO16((uint32)dc_data_ptr + i*16 ), LO16((uint32)`$INSTANCE_NAME`_SHIFT_REG_FIFO));
CyDmaTdSetAddress(DMA_TD[i*3+1], LO16((uint32)pwm_data_ptr + i*32 ), LO16((uint32)`$INSTANCE_NAME`_SHIFT_REG_FIFO));
CyDmaTdSetAddress(DMA_TD[i*3+2], LO16((uint32)pwm_data_ptr + i*32 + 16 ), LO16((uint32)`$INSTANCE_NAME`_SHIFT_REG_FIFO));
}
CyDmaChSetInitialTd(`$INSTANCE_NAME`_DMA_Chan, DMA_TD[0]);
CyDmaChEnable(`$INSTANCE_NAME`_DMA_Chan, 1);
}
/*******************************************************************************
* Function Name: OSC1_ADC_SAR_Init
********************************************************************************
*
* Summary:
* Inits channels for DMA transfer. Provides loading period to the AMUX address
* selection counter
*
* Parameters:
* None.
*
* Return:
* None.
*
* Reentrant:
* No.
*
*******************************************************************************/
void OSC1_ADC_SAR_Init(void)
{
/* Init DMA, 2 bytes bursts, each burst requires a request */
OSC1_ADC_SAR_tempChan = OSC1_ADC_SAR_TempBuf_DmaInitialize(OSC1_ADC_SAR_TEMP_BYTES_PER_BURST,
OSC1_ADC_SAR_REQUEST_PER_BURST, (uint16)(HI16(CYDEV_PERIPH_BASE)), (uint16)(HI16(CYDEV_SRAM_BASE)));
/* Init DMA, (OSC1_ADC_SAR_NUMBER_OF_CHANNELS << 1u) bytes bursts, each burst requires a request */
OSC1_ADC_SAR_finalChan = OSC1_ADC_SAR_FinalBuf_DmaInitialize((uint8)OSC1_ADC_SAR_FINAL_BYTES_PER_BURST,
OSC1_ADC_SAR_REQUEST_PER_BURST, (uint16)(HI16(CYDEV_SRAM_BASE)), (uint16)(HI16(CYDEV_SRAM_BASE)));
#if(OSC1_ADC_SAR_IRQ_REMOVE == 0u)
/* Set the ISR to point to the OSC1_ADC_SAR_IRQ Interrupt. */
OSC1_ADC_SAR_IRQ_SetVector(&OSC1_ADC_SAR_ISR);
/* Set the priority. */
OSC1_ADC_SAR_IRQ_SetPriority((uint8)OSC1_ADC_SAR_INTC_NUMBER);
#endif /* End OSC1_ADC_SAR_IRQ_REMOVE */
}
/*******************************************************************************
* Function Name: DmaRxConfiguration
********************************************************************************
* Summary:
* Configures the DMA transfer for RX direction
*
* Parameters:
* None.
*
* Return:
* None.
*
*******************************************************************************/
void DmaRxConfiguration()
{
/* Init DMA, 1 byte bursts, each burst requires a request */
rxChannel = DMA_RX_DmaInitialize(DMA_RX_BYTES_PER_BURST, DMA_RX_REQUEST_PER_BURST,
HI16(DMA_RX_SRC_BASE), HI16(DMA_RX_DST_BASE));
rxTD = CyDmaTdAllocate();
/* Configure this Td as follows:
* - Increment the destination address, but not the source address
*/
CyDmaTdSetConfiguration(rxTD, BUFFER_SIZE, CY_DMA_DISABLE_TD, TD_INC_DST_ADR);
/* From the SPIM to the memory */
CyDmaTdSetAddress(rxTD, LO16((uint32)SPIM_RXDATA_PTR), LO16((uint32)rxBuffer));
/* Associate the TD with the channel */
CyDmaChSetInitialTd(rxChannel, rxTD);
}
/*******************************************************************************
* Function Name: Dma_M_Rx_Configuration
********************************************************************************
* Summary:
* Configures the DMA transfer for RX direction
*
* Parameters:
* None.
*
* Return:
* None.
*
*******************************************************************************/
void Dma_M_Rx_Configuration()
{
/* Init DMA, 1 byte bursts, each burst requires a request */
M_RxChannel = DMA_RX_M_DmaInitialize(DMA_RX_M_BYTES_PER_BURST, DMA_RX_M_REQUEST_PER_BURST,
HI16(DMA_RX_M_SRC_BASE), HI16(DMA_RX_M_DST_BASE));
M_RxTD[0u] = CyDmaTdAllocate();
M_RxTD[1u] = CyDmaTdAllocate();
/* Configure this Td as follows:
* - The TD is looping on itself
* - Increment the destination address, but not the source address
*/
CyDmaTdSetConfiguration(M_RxTD[0u], 8u, M_RxTD[1u], TD_INC_DST_ADR);
CyDmaTdSetConfiguration(M_RxTD[1u], 1u, M_RxTD[0u], 0u);
/* From the SPIM to the memory */
CyDmaTdSetAddress(M_RxTD[0u], LO16((uint32)SPIM_BSPIM_sR8_Dp_u0__F1_REG), LO16((uint32)m_rxBuffer));
CyDmaTdSetAddress(M_RxTD[1u], LO16((uint32)m_rxBuffer), LO16((uint32)m_rxBuffer));
/* Associate the TD with the channel */
CyDmaChSetInitialTd(M_RxChannel, M_RxTD[0u]);
}
void Camera_Start()
{
Camera_SIOD_SetDriveMode(Camera_SIOD_DM_RES_UP); //turn on pull-up resistors on I2C pins
Camera_SIOC_SetDriveMode(Camera_SIOC_DM_RES_UP);
Camera_I2C_Start();
Camera_WriteReg(0x12,0x80); //reset
CyDelay(1);
uint16 i;
for(i=0;Camera_settings[i][0]!=0xff;i++) Camera_WriteReg(Camera_settings[i][0],Camera_settings[i][1]); //camera settings
for(i=0;Camera_format[i]!=0xff;i++) Camera_WriteReg(Camera_format[i],Camera_qcif[i]); //qcif format (176x144)
uint8 (*buffer)[BUFFER_SIZE]=(uint8(*)[BUFFER_SIZE])Camera_framebuffer; //recast buffer for easier arithmetic
DMA_channel=Camera_DMA_DmaInitialize(1,1,HI16(CYDEV_PERIPH_BASE),HI16(CYDEV_SRAM_BASE)); //peripheral -> SRAM
for(i=0;i<sizeof DMA_TD;i++) //set up TDs
{
DMA_TD[i]=CyDmaTdAllocate();
CyDmaTdSetAddress(DMA_TD[i],LO16(Camera_FIFO_dp__F0_REG),LO16((uint32)buffer[i]));
if(i) CyDmaTdSetConfiguration(DMA_TD[i-1],BUFFER_SIZE,DMA_TD[i],TD_INC_DST_ADR);
}
CyDmaChPriority(DMA_channel,0); //ensure highest priority for DMA channel
}
//子控件发送消息处理函数
static ptu32_t HmiNotify(struct WindowMsg *pMsg)
{
HWND hwnd;
u16 event,id;
hwnd =pMsg->hwnd;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
switch(id)
{
case ID_CLOSE:
if(event==MSG_BTN_DOWN)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
break;
////
case ID_SHOWTEXT:
if(event==CBN_SELECTED)//复选框选中
{
pb1.Flag |= PBF_SHOWTEXT;
pb2.Flag |= PBF_SHOWTEXT;
}
if(event==CBN_UNSELECTED)//复选框未选中
{
pb1.Flag &= ~PBF_SHOWTEXT;
pb2.Flag &= ~PBF_SHOWTEXT;
}
break;
////
case ID_ORG:
if(event==CBN_SELECTED)
{
pb1.Flag &= ~PBF_ORG_RIGHT;
pb2.Flag &= ~PBF_ORG_BOTTOM;
}
if(event==CBN_UNSELECTED)
{
pb1.Flag |= PBF_ORG_RIGHT;
pb2.Flag |= PBF_ORG_BOTTOM;
}
break;
}
return true;
}
void DMA_2_Config()
{
// Variable declarations for DMA_2
// Move these variable declarations to the top of the function
uint8 DMA_2_Chan;
uint8 DMA_2_TD[1];
// DMA Configuration for DMA_2
#define DMA_2_BYTES_PER_BURST 2
#define DMA_2_REQUEST_PER_BURST 1
#define DMA_2_SRC_BASE (CYDEV_PERIPH_BASE)
#define DMA_2_DST_BASE (CYDEV_SRAM_BASE)
DMA_2_Chan = DMA_2_DmaInitialize(DMA_2_BYTES_PER_BURST, DMA_2_REQUEST_PER_BURST, HI16(DMA_2_SRC_BASE), HI16(DMA_2_DST_BASE));
DMA_2_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_2_TD[0], n*2, DMA_INVALID_TD, TD_SWAP_EN | DMA_2__TD_TERMOUT_EN | TD_INC_SRC_ADR | TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_2_TD[0], LO16((uint32)Filter_1_HOLDAM_PTR), LO16((uint32)V_Sample));
CyDmaChSetInitialTd(DMA_2_Chan, DMA_2_TD[0]);
CyDmaChEnable(DMA_2_Chan, 1);
}
void DMA_1_Config()
{
// Variable declarations for DMA_1
// Move these variable declarations to the top of the function
uint8 DMA_1_Chan;
uint8 DMA_1_TD[1];
// DMA Configuration for DMA_1
#define DMA_1_BYTES_PER_BURST 2
#define DMA_1_REQUEST_PER_BURST 1
#define DMA_1_SRC_BASE (CYDEV_PERIPH_BASE)
#define DMA_1_DST_BASE (CYDEV_PERIPH_BASE)
DMA_1_Chan = DMA_1_DmaInitialize(DMA_1_BYTES_PER_BURST, DMA_1_REQUEST_PER_BURST, HI16(DMA_1_SRC_BASE), HI16(DMA_1_DST_BASE));
DMA_1_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_1_TD[0], 2, DMA_INVALID_TD, TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_1_TD[0], LO16((uint32)ADC_DelSig_1_DEC_SAMP_PTR), LO16((uint32)Filter_1_STAGEAM_PTR));
CyDmaChSetInitialTd(DMA_1_Chan, DMA_1_TD[0]);
CyDmaChEnable(DMA_1_Chan, 1);
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 i;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
text_align_idx =0;
prog1_val=0;
prog2_val=0;
prog1_inc=1;
prog2_inc=1;
pb1.Flag =PBF_SHOWTEXT|PBF_ORG_LEFT;
pb1.Range =100;
pb1.Pos =prog1_val;
pb1.FGColor =RGB(0,160,0);
pb1.BGColor =RGB(10,10,10);
pb1.TextColor =RGB(240,240,240);
pb1.DrawTextFlag =DT_VCENTER|DT_CENTER;
pb2.Flag =PBF_SHOWTEXT|PBF_ORG_BOTTOM;
pb2.Range =100;
pb2.Pos =prog1_val;
pb2.FGColor =RGB(200,0,0);
pb2.BGColor =RGB(10,10,200);
pb2.TextColor =RGB(1,1,1);
pb2.DrawTextFlag =DT_VCENTER|DT_CENTER;
GetClientRect(hwnd,&rc0);
CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,RectW(&rc0)-64,RectH(&rc0)-28,60,24,hwnd,ID_CLOSE,NULL);
i=RectH(&rc0)-(3*30);
CreateWindow(CHECKBOX,"显示文字",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+0*32,128,24,hwnd,ID_SHOWTEXT,NULL);
CreateWindow(CHECKBOX,"增长方向",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+1*32,128,24,hwnd,ID_ORG,NULL);
// CreateWindow(CHECKBOX,"改变颜色",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+2*32,128,24,hwnd,ID_COLOR,NULL);
CreateWindow(PROGRESSBAR,"水平进度条1",WS_CHILD|PBS_HOR|WS_VISIBLE,8,16,128,28,hwnd,ID_PROGBAR1,NULL);
CreateWindow(PROGRESSBAR,"垂直进度条2",WS_CHILD|PBS_VER|WS_VISIBLE,160,16,28,128,hwnd,ID_PROGBAR2,NULL);
GDD_CreateTimer(hwnd,1,3000,TMR_START);
GDD_CreateTimer(hwnd,2,100,TMR_START);
break;
////
case MSG_TIMER:
{
switch(pMsg->Param1)
{
case 1:
{
HWND wnd;
text_align_idx++;
if(text_align_idx>=9)
{
text_align_idx=0;
}
pb1.DrawTextFlag =text_align[text_align_idx];
pb2.DrawTextFlag =text_align[text_align_idx];
wnd =GetDlgItem(hwnd,ID_PROGBAR1);
SendMessage(wnd,PBM_SETDATA,(u32)&pb1,NULL);
wnd =GetDlgItem(hwnd,ID_PROGBAR2);
SendMessage(wnd,PBM_SETDATA,(u32)&pb2,NULL);
}
break;
/////
case 2:
{
HWND wnd;
if(prog1_val<=0)
{
prog1_val =0;
prog1_inc =1;
}
if(prog1_val>=100)
{
prog1_val =100;
prog1_inc =-1;
}
wnd =GetDlgItem(hwnd,ID_PROGBAR1);
pb1.Pos =prog1_val;
SendMessage(wnd,PBM_SETDATA,(u32)&pb1,NULL);
sprintf(text_buf,"进度:%d...",pb1.Pos);
SetWindowText(wnd,text_buf,1000);
prog1_val += prog1_inc;
if(prog2_val<=0)
{
prog2_val =0;
prog2_inc =1;
}
if(prog2_val>=100)
{
prog2_val =100;
prog2_inc =-1;
}
wnd =GetDlgItem(hwnd,ID_PROGBAR2);
pb2.Pos =prog2_val;
SendMessage(wnd,PBM_SETDATA,(u32)&pb2,NULL);
sprintf(text_buf,"%d%%",pb2.Pos);
SetWindowText(wnd,text_buf,1000);
prog2_val += prog2_inc;
InvalidateWindow(hwnd);
}
break;
/////
}
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
switch(id)
{
case ID_CLOSE:
if(event==BTN_UP)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
break;
////
case ID_SHOWTEXT:
if(event==CBN_SELECTED)//复选框选中
{
pb1.Flag |= PBF_SHOWTEXT;
pb2.Flag |= PBF_SHOWTEXT;
}
if(event==CBN_UNSELECTED)//复选框未选中
{
pb1.Flag &= ~PBF_SHOWTEXT;
pb2.Flag &= ~PBF_SHOWTEXT;
}
break;
////
case ID_ORG:
if(event==CBN_SELECTED)
{
pb1.Flag &= ~PBF_ORG_RIGHT;
pb2.Flag &= ~PBF_ORG_BOTTOM;
}
if(event==CBN_UNSELECTED)
{
pb1.Flag |= PBF_ORG_RIGHT;
pb2.Flag |= PBF_ORG_BOTTOM;
}
break;
////
}
}
break;
////
case MSG_PAINT:
{
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetFillColor(hdc,RGB(200,200,200));
FillRect(hdc,&rc0);
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 x,y;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
timer_500ms_count=0;
memset(ZigBeeTextBuf,0,sizeof(ZigBeeTextBuf));
memset(ZigBeeTimeBuf,0,sizeof(ZigBeeTimeBuf));
zigbee_ShowString("Zigbee Text");
hwndZigBee =hwnd;
GetClientRect(hwnd,&rc0);
SetFocusWindow(hwnd);
CreateWindow(BUTTON,"关闭",WS_BORDER|WS_DLGFRAME|WS_CHILD|BS_SIMPLE|WS_VISIBLE,RectW(&rc0)-60,RectH(&rc0)-60,56,56,hwnd,ID_CLOSE,NULL);
SetRect(&rcZigBeeString,4,4,RectW(&rc0)-4*2,60);
x=4;
y=RectH(&rc0)-70;
SetRect(&rcGroupBox_LED,x,y,100,66);
SetRect(&rcGroupBox_CTR,x+100+4,y,100,66);
x=rcGroupBox_LED.left+12;
y=rcGroupBox_LED.top+18;
CreateWindow(BUTTON,"LED1",WS_BORDER|WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+0*24,72,20,hwnd,ID_LED1,NULL);
CreateWindow(BUTTON,"LED2",WS_BORDER|WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+1*24,72,20,hwnd,ID_LED2,NULL);
x=rcGroupBox_CTR.left+12;
y=rcGroupBox_CTR.top+18;
CreateWindow(BUTTON,"组网",WS_BORDER|WS_CHILD|WS_VISIBLE,x,y+0*24,72,20,hwnd,ID_NET_ON,NULL);
CreateWindow(BUTTON,"断开",WS_BORDER|WS_CHILD|WS_VISIBLE,x,y+1*24,72,20,hwnd,ID_NET_OFF,NULL);
CreateWindow(BUTTON,"发送",WS_BORDER|WS_CHILD|BS_SIMPLE|WS_VISIBLE,RectW(&rc0)-60,rcGroupBox_CTR.top-(24+2),56,24,hwnd,ID_SEND,NULL);
GDD_CreateTimer(hwnd,0,500,TMR_START);
break;
////
case MSG_KEY_DOWN:
break;
//////
case MSG_KEY_UP:
{
u16 key_val;
hdc =BeginPaint(hwnd);
key_val =LO16(pMsg->Param1);
sprintf(ZigBeeTextBuf,"KeyVal:%04XH",key_val);
DrawText(hdc,ZigBeeTextBuf,-1,&rc,DT_LEFT|DT_VCENTER|DT_BORDER|DT_BKGND);
EndPaint(hwnd,hdc);
// InvalidateWindow(hwnd);
}
break;
//////
case MSG_TIMER:
{
timer_500ms_count++;
sprintf(ZigBeeTimeBuf,"TIME:%06d",timer_500ms_count);
/*
i=SendMessage(GetDesktopWindow(),MSG_GET_POS,timer_500ms_count,0);
printf("i=%08XH.\r\n",i);
*/
InvalidateWindow(hwnd);
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
switch(event)
{
case BTN_DOWN: //按钮按下
if(id==ID_LED1)
{
zigbee_LED1_ON();
}
if(id==ID_LED2)
{
zigbee_LED2_ON();
}
if(id==ID_NET_ON)
{
zigbee_NET_ON();
}
if(id==ID_NET_OFF)
{
zigbee_NET_OFF();
}
if(id==ID_SEND)
{
zigbee_send_string(ZigBeeTextBuf);
}
break;
////
case BTN_UP: //按钮弹起
if(id==ID_CLOSE)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
if(id==ID_LED1)
{
zigbee_LED1_OFF();
}
if(id==ID_LED2)
{
zigbee_LED2_OFF();
}
break;
////
}
}
break;
////
case MSG_PAINT:
{
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetFillColor(hdc,RGB(150,150,150));
FillRect(hdc,&rc0);
SetTextColor(hdc,RGB(0,0,128));
SetDrawColor(hdc,RGB(100,100,100));
DrawGroupBox(hdc,&rcZigBeeString,"信息接收区");
////
SetRect(&rc,
rcGroupBox_LED.left,
rcGroupBox_LED.top-(24+2),
RectW(&rcGroupBox_LED),
24);
if(zigbee_is_ok())
{
SetTextColor(hdc,RGB(0,255,0));
SetDrawColor(hdc,RGB(0,200,0));
SetFillColor(hdc,RGB(0,128,0));
DrawText(hdc,"连接成功",-1,&rc,DT_CENTER|DT_VCENTER|DT_BORDER|DT_BKGND);
}
else
{
SetTextColor(hdc,RGB(255,0,0));
SetDrawColor(hdc,RGB(200,0,0));
SetFillColor(hdc,RGB(100,0,0));
if(timer_500ms_count&0x01)
{
DrawText(hdc,"未连接",-1,&rc,DT_CENTER|DT_VCENTER|DT_BORDER|DT_BKGND);
}
else
{
DrawText(hdc," ",-1,&rc,DT_CENTER|DT_VCENTER|DT_BORDER|DT_BKGND);
}
}
////
SetRect(&rc,
rcGroupBox_CTR.left,
rcGroupBox_CTR.top-(24+2),
RectW(&rcGroupBox_CTR),
24);
SetTextColor(hdc,RGB(0,255,255));
SetDrawColor(hdc,RGB(0,200,200));
SetFillColor(hdc,RGB(0,80,80));
DrawText(hdc,ZigBeeTimeBuf,-1,&rc,DT_CENTER|DT_VCENTER|DT_BORDER|DT_BKGND);
////
SetTextColor(hdc,RGB(0,255,0));
SetDrawColor(hdc,RGB(0,200,0));
SetFillColor(hdc,RGB(0,80,0));
CopyRect(&rc,&rcZigBeeString);
InflateRectEx(&rc,-4,-20,-4,-4);
DrawText(hdc,ZigBeeTextBuf,-1,&rc,DT_LEFT|DT_VCENTER|DT_BORDER|DT_BKGND);
SetTextColor(hdc,RGB(0,0,128));
SetDrawColor(hdc,RGB(80,80,80));
DrawGroupBox(hdc,&rcGroupBox_LED,"LED控制");
DrawGroupBox(hdc,&rcGroupBox_CTR,"网络控制");
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 i;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
GetClientRect(hwnd,&rc0);
CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,RectW(&rc0)-64,RectH(&rc0)-28,60,24,hwnd,ID_CLOSE,NULL);
SetRect(&rc,4,8,120,100);
hwndLB1=CreateWindow(LISTBOX,"列表框1",WS_CHILD|WS_BORDER|WS_VISIBLE,rc.left,rc.top,RectW(&rc),RectH(&rc),hwnd,ID_LISTBOX1,NULL);
OffsetRect(&rc,RectW(&rc)+8,0);
hwndLB2=CreateWindow(LISTBOX,"列表框2",WS_CHILD|WS_BORDER|WS_VISIBLE,rc.left,rc.top,RectW(&rc),RectH(&rc),hwnd,ID_LISTBOX2,NULL);
GetWindowRect(hwndLB1,&rc);
OffsetRect(&rc,0,RectH(&rc)+4);
ScreenToClient(hwnd,(POINT*)&rc,2);
CreateWindow(BUTTON,"-->",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,rc.right-50,rc.top,50,20,hwnd,ID_RIGHT,NULL);
GetWindowRect(hwndLB2,&rc);
OffsetRect(&rc,0,RectH(&rc)+4);
ScreenToClient(hwnd,(POINT*)&rc,2);
CreateWindow(BUTTON,"<--",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,rc.left,rc.top,50,20,hwnd,ID_LEFT,NULL);
SendMessage(hwndLB1,LBM_ADDSTRING,0,(u32)"ListItem-0");
SendMessage(hwndLB1,LBM_ADDSTRING,1,(u32)"ListItem-1");
SendMessage(hwndLB1,LBM_ADDSTRING,2,(u32)"ListItem-2");
SendMessage(hwndLB1,LBM_ADDSTRING,3,(u32)"ListItem-3");
SendMessage(hwndLB1,LBM_ADDSTRING,4,(u32)"ListItem-4");
SendMessage(hwndLB1,LBM_ADDSTRING,5,(u32)"ListItem-5");
SendMessage(hwndLB1,LBM_ADDSTRING,6,(u32)"ListItem-6");
SendMessage(hwndLB1,LBM_ADDSTRING,7,(u32)"ListItem-7");
SendMessage(hwndLB1,LBM_ADDSTRING,8,(u32)"ListItem-8");
SendMessage(hwndLB1,LBM_ADDSTRING,9,(u32)"ListItem-9");
SendMessage(hwndLB1,LBM_SETTOPINDEX,0,0);
SendMessage(hwndLB1,LBM_SETCURSEL,3,0);
SendMessage(hwndLB2,LBM_ADDSTRING,0,(u32)"ListItem-10");
SendMessage(hwndLB2,LBM_ADDSTRING,1,(u32)"ListItem-11");
SendMessage(hwndLB2,LBM_ADDSTRING,2,(u32)"ListItem-12");
SendMessage(hwndLB2,LBM_ADDSTRING,3,(u32)"ListItem-13");
SendMessage(hwndLB2,LBM_ADDSTRING,4,(u32)"ListItem-14");
SendMessage(hwndLB2,LBM_ADDSTRING,5,(u32)"ListItem-15");
SendMessage(hwndLB2,LBM_ADDSTRING,6,(u32)"ListItem-16");
SendMessage(hwndLB2,LBM_ADDSTRING,7,(u32)"ListItem-17");
SendMessage(hwndLB2,LBM_ADDSTRING,8,(u32)"ListItem-18");
SendMessage(hwndLB2,LBM_ADDSTRING,9,(u32)"ListItem-19");
SendMessage(hwndLB2,LBM_SETTOPINDEX,0,0);
SendMessage(hwndLB2,LBM_SETCURSEL,3,0);
GDD_CreateTimer(hwnd,1,3000,TMR_START);
GDD_CreateTimer(hwnd,2,100,TMR_START);
break;
////
case MSG_TIMER:
{
switch(pMsg->Param1)
{
case 1:
{
}
break;
/////
case 2:
{
}
break;
/////
}
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
if(event==BTN_UP && id==ID_CLOSE)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}////
if(event==BTN_UP && id==ID_RIGHT)
{
char *buf;
int i;
i =SendMessage(hwndLB1,LBM_GETCURSEL,0,0);
if(i>=0)
{
buf =(char*)malloc(SendMessage(hwndLB1,LBM_GETTEXTLEN,i,0));
if(buf!=NULL)
{
SendMessage(hwndLB1,LBM_GETTEXT,i,(u32)buf);
SendMessage(hwndLB1,LBM_DELSTRING,i,0);
SendMessage(hwndLB2,LBM_ADDSTRING,-1,(u32)buf);
i=SendMessage(hwndLB2,LBM_GETCOUNT,0,0)-1;
SendMessage(hwndLB2,LBM_SETTOPINDEX,i-3,0);
SendMessage(hwndLB2,LBM_SETCURSEL,-1,0);
free(buf);
}
}
}////
if(event==BTN_UP && id==ID_LEFT)
{
char *buf;
int i;
i =SendMessage(hwndLB2,LBM_GETCURSEL,0,0);
if(i>=0)
{
buf =(char*)malloc(SendMessage(hwndLB2,LBM_GETTEXTLEN,i,0));
if(buf!=NULL)
{
SendMessage(hwndLB2,LBM_GETTEXT,i,(u32)buf);
SendMessage(hwndLB2,LBM_DELSTRING,i,0);
SendMessage(hwndLB1,LBM_ADDSTRING,-1,(u32)buf);
i=SendMessage(hwndLB1,LBM_GETCOUNT,0,0)-1;
SendMessage(hwndLB1,LBM_SETTOPINDEX,i-3,0);
SendMessage(hwndLB1,LBM_SETCURSEL,-1,0);
free(buf);
}
}
}////
if(event==LBN_SELCHANGE && id==ID_LISTBOX1)
{
printf("listbox1 sel change.\r\n");
}////
if(event==LBN_SELCHANGE && id==ID_LISTBOX2)
{
printf("listbox2 sel change.\r\n");
}////
}
break;
////
case MSG_PAINT:
{
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetFillColor(hdc,RGB(200,200,200));
FillRect(hdc,&rc0);
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 i,x,y;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
cfg_idx =0;
bBorder=TRUE;
bBKGND=TRUE;
bColor=TRUE;
for(i=0;i<8;i++)
{
timer_count[i] =0;
timer_run[i] =FALSE;
}
GetClientRect(hwnd,&rc0);
CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,RectW(&rc0)-64,RectH(&rc0)-28,60,24,hwnd,ID_CLOSE,NULL);
y=20;
x=128+8;
CreateWindow(BUTTON,"运行",WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+0*28,60,24,hwnd,ID_START_1,NULL);
CreateWindow(BUTTON,"运行",WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+1*28,60,24,hwnd,ID_START_2,NULL);
CreateWindow(BUTTON,"运行",WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+2*28,60,24,hwnd,ID_START_3,NULL);
CreateWindow(BUTTON,"运行",WS_CHILD|BS_HOLD|WS_VISIBLE,x,y+3*28,60,24,hwnd,ID_START_4,NULL);
y=20;
x=128+8+64;
CreateWindow(BUTTON,"清零",WS_CHILD|WS_VISIBLE,x,y+0*28,60,24,hwnd,ID_CLR_1,NULL);
CreateWindow(BUTTON,"清零",WS_CHILD|WS_VISIBLE,x,y+1*28,60,24,hwnd,ID_CLR_2,NULL);
CreateWindow(BUTTON,"清零",WS_CHILD|WS_VISIBLE,x,y+2*28,60,24,hwnd,ID_CLR_3,NULL);
CreateWindow(BUTTON,"清零",WS_CHILD|WS_VISIBLE,x,y+3*28,60,24,hwnd,ID_CLR_4,NULL);
GDD_CreateTimer(hwnd,0,timer_interval[0],0);
GDD_CreateTimer(hwnd,1,timer_interval[1],0);
GDD_CreateTimer(hwnd,2,timer_interval[2],0);
GDD_CreateTimer(hwnd,3,timer_interval[3],0);
GDD_CreateTimer(hwnd,7,500,TMR_START);
break;
////
case MSG_TIMER:
{
i =pMsg->Param1&0xFF;
timer_count[i]++;
InvalidateWindow(hwnd);
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
switch(event)
{
case BTN_DOWN: //按钮按下
if(id>=ID_START_1 && id<=ID_START_4)
{
i =id&0xF;
timer_run[i] =TRUE;
GDD_ResetTimer(GDD_FindTimer(hwnd,i),timer_interval[i],TMR_START);
}
if(id>=ID_CLR_1 && id<=ID_CLR_4)
{
i =id&0xF;
timer_count[i] =0;
InvalidateWindow(hwnd);
}
break;
////
case BTN_UP: //按钮弹起
if(id==ID_CLOSE)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
if(id>=ID_START_1 && id<=ID_START_4)
{
i =id&0xF;
timer_run[i] =FALSE;
GDD_ResetTimer(GDD_FindTimer(hwnd,i),timer_interval[i],0);
}
break;
////
}
}
break;
////
case MSG_PAINT:
{
char wbuf[32];
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetFillColor(hdc,RGB(100,100,100));
FillRect(hdc,&rc0);
SetRect(&rc,4,20,128,24);
for(i=0;i<4;i++)
{
SetTextColor(hdc,DrawText_Color_Tbl[i].text_color);
SetDrawColor(hdc,DrawText_Color_Tbl[i].bd_color);
SetFillColor(hdc,DrawText_Color_Tbl[i].bk_color);
sprintf(wbuf," 定时器%d: %d",i+1,timer_count[i]);
if(timer_run[i]!=FALSE)
{
DrawText(hdc,wbuf,-1,&rc,DT_LEFT|DT_VCENTER|DT_BORDER|DT_BKGND);
}
else
{
if(timer_count[7]&0x01)
{
DrawText(hdc,wbuf,-1,&rc,DT_LEFT|DT_VCENTER|DT_BORDER|DT_BKGND);
}
else
{
DrawText(hdc,wbuf,-1,&rc,DT_LEFT|DT_VCENTER|DT_BKGND);
}
}
OffsetRect(&rc,0,28);
}
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
/*******************************************************************************
* Function Name: SimulateCyclingSpeed
********************************************************************************
*
* Summary:
* Simulates Cycling speed data and send them to the Client device.
*
* Parameters:
* None.
*
* Return:
* None
*
*******************************************************************************/
void SimulateCyclingSpeed(void)
{
CYBLE_API_RESULT_T apiResult;
uint8 csValue[CSC_MEASUREMENT_CHAR_SIZE];
uint8 len = 0u;
/* Updates CSC Measurement Characteristic data */
wheelRev += CSC_WHEEL_REV_VAL;
lastWheelEvTime += CSC_WHEEL_EV_TIME_VAL;
crankRev += CSC_CRANK_REV_VAL;
lastCrankEvTime += CSC_CRANK_EV_TIME_VAL;
if((speedSimulation & CSCS_NOTIFICATION_ENABLE) != 0u)
{
/* Pack SCS Measurement Characteristic data */
csValue[len++] = cscFlags;
if(0u != (cscFlags & CSC_WHEEL_REV_DATA_PRESENT))
{
csValue[len++] = LO8(LO16(wheelRev));
csValue[len++] = HI8(LO16(wheelRev));
csValue[len++] = LO8(HI16(wheelRev));
csValue[len++] = HI8(HI16(wheelRev));
csValue[len++] = LO8(lastWheelEvTime);
csValue[len++] = HI8(lastWheelEvTime);
/* Calculate instantaneous speed */
cscSpeed = ((((((uint32)WHEEEL_CIRCUMFERENCE_CM) * (CSC_WHEEL_REV_VAL))
* ((uint32) WHEEL_TIME_EVENT_UNIT)) / ((uint32) CSC_WHEEL_EV_TIME_VAL))
* ((uint32) MS_TO_KMH_COEFITIENT)) / ((uint32) INT_DIVIDER);
}
if(0u != (cscFlags & CSC_CRANK_REV_DATA_PRESENT))
{
csValue[len++] = LO8(crankRev);
csValue[len++] = HI8(crankRev);
csValue[len++] = LO8(lastCrankEvTime);
csValue[len++] = HI8(lastCrankEvTime);
cscCadenceRpm = (((uint32) CSC_CRANK_REV_VAL) * ((uint32) WHEEL_TIME_EVENT_UNIT) * 60u) /
((uint32) CSC_CRANK_EV_TIME_VAL);
}
/* Send Characteristic value to peer device */
apiResult = CyBle_CscssSendNotification(cyBle_connHandle, CYBLE_CSCS_CSC_MEASUREMENT, len, csValue);
if(CYBLE_ERROR_OK == apiResult)
{
DBG_PRINTF("CscssSendNotification, ");
DBG_PRINTF("Wheel Revolution: %ld, ", wheelRev);
DBG_PRINTF("Wheel Time: %ld s, ", lastWheelEvTime / CSC_TIME_PER_SEC);
DBG_PRINTF("Crank Revolution: %ld, ", crankRev);
DBG_PRINTF("Crank Time: %ld s, ", lastCrankEvTime / CSC_TIME_PER_SEC);
DBG_PRINTF("Speed: %d.%2.2d km/h, ", cscSpeed/100u, cscSpeed%100u);
DBG_PRINTF("Cadence: %d rpm\r\n", cscCadenceRpm);
}
else
{
DBG_PRINTF("Error #%x while sending CSC Measurement Characteristic notification\r\n", apiResult);
}
}
if(((speedSimulation & CSCS_INDICATION_ENABLE) != 0u) && (speedCPresponse != 0u))
{
apiResult = CyBle_CscssSendIndication(cyBle_connHandle, CYBLE_CSCS_SC_CONTROL_POINT,
scCPResponse[CSCS_SC_CP_RESP_LEN_IDX], scCPResponse + 1u);
DBG_PRINTF("CyBle_CscsSendIndication(CYBLE_CSCS_SC_CONTROL_POINT), API result: %x \r\n", apiResult);
speedCPresponse = 0u;
}
}
/*******************************************************************************
* Function Name: CscServiceAppEventHandler
********************************************************************************
*
* Summary:
* This is an event callback function to receive events from the BLE Component,
* which are specific to Cycling Speed and Cadence Service.
*
* Parameters:
* event: CSCS event.
* *eventParams: Data structure specific to event received.
*
* Return:
* None
*
*******************************************************************************/
void CscsCallback(uint32 event, void *eventParam)
{
uint8 i;
uint8 sensorLocSupported = 0u;
CYBLE_CSCS_CHAR_VALUE_T *wrReqParam;
switch(event)
{
/* CSCS Server - Notifications for Cycling Speed and Cadence Service
Characteristic was enabled. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type.
*/
case CYBLE_EVT_CSCSS_NOTIFICATION_ENABLED:
DBG_PRINTF("Notifications for CSC Measurement Characteristic are enabled\r\n");
speedSimulation |= CSCS_NOTIFICATION_ENABLE;
break;
/* CSCS Server - Notifications for Cycling Speed and Cadence Service
Characteristic was disabled. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSS_NOTIFICATION_DISABLED:
DBG_PRINTF("Notifications for CSC Measurement Characteristic are disabled\r\n");
speedSimulation &= ~CSCS_NOTIFICATION_ENABLE;
break;
/* CSCS Server - Indication for Cycling Speed and Cadence Service Characteristic
was enabled. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSS_INDICATION_ENABLED:
DBG_PRINTF("Indications for SC Control Point Characteristic are enabled\r\n");
speedSimulation |= CSCS_INDICATION_ENABLE;
break;
/* CSCS Server - Indication for Cycling Speed and Cadence Service Characteristic
was disabled. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSS_INDICATION_DISABLED:
DBG_PRINTF("Indications for SC Control Point Characteristic are disabled\r\n");
speedSimulation &= ~CSCS_INDICATION_ENABLE;
break;
/* CSCS Server - Cycling Speed and Cadence Service Characteristic
Indication was confirmed. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSS_INDICATION_CONFIRMATION:
DBG_PRINTF("Confirmation of SC Control Point Characteristic indication received\r\n");
break;
/* CSCS Server - Write Request for Cycling Speed and Cadence Service
Characteristic was received. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type.
*/
case CYBLE_EVT_CSCSS_CHAR_WRITE:
wrReqParam = (CYBLE_CSCS_CHAR_VALUE_T *) eventParam;
DBG_PRINTF("Write to SC Control Point Characteristic occurred. ");
DBG_PRINTF("Data length: %d. ", wrReqParam->value->len);
DBG_PRINTF("Received data:");
for(i = 0u; i < wrReqParam->value->len; i++)
{
DBG_PRINTF(" %x", wrReqParam->value->val[i]);
}
DBG_PRINTF("\r\n");
/* Form the general response packet */
scCPResponse[CSCS_SC_CP_RESP_LEN_IDX] = SC_CP_CHAR_LENGTH_3BYTES;
scCPResponse[CSCS_SC_CP_RESP_OP_CODE_IDX] = CYBLE_CSCS_RESPONSE_CODE;
scCPResponse[CSCS_SC_CP_REQ_OP_CODE_IDX] = wrReqParam->value->val[CSCS_SC_CP_OP_CODE_IDX];
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_SUCCESS;
/* Handle the received op code */
switch(wrReqParam->value->val[CSCS_SC_CP_OP_CODE_IDX])
{
case CYBLE_CSCS_SET_CUMMULATIVE_VALUE:
if(wrReqParam->value->len == CSCS_SET_CUMMULATIVE_VALUE_LEN)
{
wheelRev = (wrReqParam->value->val[CSCS_SC_CUM_VAL_BYTE0_IDX + 3u] << THREE_BYTES_SHIFT) |
(wrReqParam->value->val[CSCS_SC_CUM_VAL_BYTE0_IDX + 2u] << TWO_BYTES_SHIFT) |
(wrReqParam->value->val[CSCS_SC_CUM_VAL_BYTE0_IDX + 1u] << ONE_BYTE_SHIFT) |
wrReqParam->value->val[CSCS_SC_CUM_VAL_BYTE0_IDX];
if(0ul == wheelRev)
{
DBG_PRINTF("Set cumulative value to zero.\r\n");
}
else
{
DBG_PRINTF("Set cumulative value to 0x%4.4x%4.4x.\r\n", HI16(wheelRev), LO16(wheelRev));
}
}
else
{
/* Length is invalid, indicate failure */
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OPERATION_FAILED;
}
break;
case CYBLE_CSCS_START_SENSOR_CALIBRATION:
DBG_PRINTF("Start Sensor calibration command received. ");
if(wrReqParam->value->len == CSCS_START_SENSOR_CALIBRATION_LEN)
{
DBG_PRINTF("This command is not supported in this example project.\r\n");
/* The Start Sensor Calibration command is not supported in the example */
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OP_CODE_NOT_SUPPORTED;
}
else
{
/* Length is invalid, indicate failure */
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OPERATION_FAILED;
}
break;
case CYBLE_CSCS_UPDATE_SENSOR_LOCATION:
DBG_PRINTF("Update Sensor Location \r\n");
if(wrReqParam->value->len == CSCS_UPDATE_SENSOR_LOCATION_LEN)
{
/* Update to the location of the Sensor with the value sent as parameter to this op code.
*/
for(i = 0u; i < NUM_SUPPORTED_SENSORS; i++)
{
if(sensorLocations[i] == wrReqParam->value->val[CYBLE_CSCS_SENSOR_LOC_IDX])
{
sensorLocSupported = 1u;
}
}
if(0u != sensorLocSupported)
{
(void) CyBle_CscssSetCharacteristicValue(CYBLE_CSCS_SENSOR_LOCATION,
sizeof(uint8),
&wrReqParam->value->val[CYBLE_CSCS_SENSOR_LOC_IDX]);
DBG_PRINTF("Set sensor location operation completed successfully. \r\n");
}
else
{
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_INVALID_PARAMETER;
DBG_PRINTF("Unsupported sensor location.\r\n");
}
}
else
{
/* Length is invalid, indicate failure */
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OPERATION_FAILED;
}
break;
case CYBLE_CSCS_REQ_SUPPORTED_SENSOR_LOCATION:
DBG_PRINTF("Request Supported Sensor Locations \r\n");
if(wrReqParam->value->len == CSCS_REQ_SUPPORTED_SENSOR_LOCATION_LEN)
{
/* Request a list of supported locations where the Sensor can be attached. */
scCPResponse[CSCS_SC_CP_RESP_LEN_IDX] += NUM_SUPPORTED_SENSORS;
for(i = 0u; i < NUM_SUPPORTED_SENSORS; i++)
{
scCPResponse[CSCS_SC_CP_RESP_PARAMETER_IDX + i] = sensorLocations[i];
}
}
else
{
/* Length is invalid, indicate failure */
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OPERATION_FAILED;
}
break;
default:
DBG_PRINTF("Unsupported command.\r\n");
scCPResponse[CSCS_SC_CP_RESP_VALUE_IDX] = CYBLE_CSCS_ERR_OP_CODE_NOT_SUPPORTED;
break;
}
/* Set the flag about active response pending */
speedCPresponse = 1u;
break;
/* CSCS Client - Cycling Speed and Cadence Service Characteristic
Notification was received. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_NOTIFICATION:
break;
/* CSCS Client - Cycling Speed and Cadence Service Characteristic
Indication was received. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_INDICATION:
break;
/* CSCS Client - Read Response for Read Request of Cycling Speed and Cadence
Service Characteristic value. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_READ_CHAR_RESPONSE:
break;
/* CSCS Client - Write Response for Write Request of Cycling Speed and Cadence
Service Characteristic value. The parameter of this event is a structure of
CYBLE_CSCS_CHAR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_WRITE_CHAR_RESPONSE:
break;
/* CSCS Client - Read Response for Read Request of Cycling Speed and Cadence
Service Characteristic Descriptor Read request. The parameter of this event
is a structure of CYBLE_CSCS_DESCR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_READ_DESCR_RESPONSE:
break;
/* CSCS Client - Write Response for Write Request of Cycling Speed and Cadence
Service Characteristic Configuration Descriptor value. The parameter of
this event is a structure of CYBLE_CSCS_DESCR_VALUE_T type
*/
case CYBLE_EVT_CSCSC_WRITE_DESCR_RESPONSE:
break;
default:
DBG_PRINTF("Unrecognized CSCS event.\r\n");
break;
}
}
int sbv_patch_enable_lmb()
{
u8 buf[256];
slib_exp_lib_t *modload_lib = (slib_exp_lib_t *)buf;
smod_mod_info_t *loadfile_info = (smod_mod_info_t *)buf;
void *pStartModule, *pLoadModuleBuffer, *lf_text_start, *patch_addr;
u32 lf_rpc_dispatch, lf_jump_table, result;
int nexps, id, i;
memset(&_slib_cur_exp_lib_list, 0, sizeof(slib_exp_lib_list_t));
/* Locate the modload export library - it must have at least 16 exports. */
if ((nexps = slib_get_exp_lib("modload", modload_lib)) < 16)
return -1;
pStartModule = modload_lib->exports[8];
pLoadModuleBuffer = modload_lib->exports[10];
/* Now we need to find the loadfile module. */
memset(buf, 0, sizeof(smod_mod_info_t));
if (!(id = smod_get_mod_by_name("LoadModuleByEE", loadfile_info)))
return -1;
/* Locate the loadfile RPC dispatch code, where the first 4 instructions look like:
27bdffe8 addiu $sp, -24
2c820006 sltiu $v0, $a0, 6
14400003 bnez $v0, +12
afbf0010 sw $ra, 0x10($sp)
*/
lf_text_start = (void *)(loadfile_info->text_start + 0x400);
smem_read(lf_text_start, buf, sizeof buf);
for (i = 0; i < sizeof buf; i += 4) {
if ((*(u32 *)(buf + i) == 0x27bdffe8) &&
(*(u32 *)(buf + i + 4) == 0x2c820006) &&
(*(u32 *)(buf + i + 8) == 0x14400003) &&
(*(u32 *)(buf + i + 12) == 0xafbf0010))
break;
}
/* This is a special case: if the IOP was reset with an image that contains a
LOADFILE that supports LMB, we won't detect the dispatch routine. If we
even got this far in the code then we can return success. */
if (i >= sizeof buf)
return 0;
/* We need to extract the address of the jump table, it's only 40 bytes in. */
lf_rpc_dispatch = (u32)lf_text_start + i;
smem_read((void *)lf_rpc_dispatch, buf, 40);
lf_jump_table = (*(u16 *)(buf + 0x1c) << 16) + *(s16 *)(buf + 0x24);
/* Now we can patch our subversive LoadModuleBuffer RPC call. */
SifInitIopHeap();
if (!(patch_addr = SifAllocIopHeap(sizeof lmb_patch)))
return -1;
/* result is where the RPC return structure is stored. */
result = (u32)patch_addr + 96;
lmb_patch[5] = JAL((u32)pLoadModuleBuffer);
lmb_patch[7] = HI16(result);
lmb_patch[9] = LO16(result);
lmb_patch[15] = JAL((u32)pStartModule);
SyncDCache(lmb_patch, (void *)(lmb_patch + 24));
smem_write(patch_addr, lmb_patch, sizeof lmb_patch);
/* Finally. The last thing to do is to patch the loadfile RPC dispatch routine
so that it will jump to entry #6 in it's jump table, and to patch the jump
table itself. */
ee_kmode_enter();
*(u32 *)(SUB_VIRT_MEM + lf_rpc_dispatch + 4) = 0x2c820007;
*(u32 *)(SUB_VIRT_MEM + lf_jump_table + 0x18) = (u32)patch_addr;
ee_kmode_exit();
return 0;
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 i;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
cfg_idx =0;
bBorder=TRUE;
bBKGND=TRUE;
bColor=TRUE;
GetClientRect(hwnd,&rc0);
CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,RectW(&rc0)-64,RectH(&rc0)-28,60,24,hwnd,ID_CLOSE,NULL);
i=RectH(&rc0)-(3*30);
CreateWindow(CHECKBOX,"绘制边框",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+0*32,128,24,hwnd,ID_BORDER,NULL);
CreateWindow(CHECKBOX,"绘制背景",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+1*32,128,24,hwnd,ID_BKGND,NULL);
CreateWindow(CHECKBOX,"改变颜色",WS_CHILD|CBS_SELECTED|WS_VISIBLE,4,i+2*32,128,24,hwnd,ID_COLOR,NULL);
GDD_CreateTimer(hwnd,1,3000,TMR_START);
GDD_CreateTimer(hwnd,2,1000,TMR_START);
break;
////
case MSG_TIMER:
{
switch(pMsg->Param1)
{
case 1:
cfg_idx++;
if(DrawText_Cfg_Tbl[cfg_idx].text==NULL)
{
cfg_idx=0;
}
InvalidateWindow(hwnd);
break;
/////
case 2:
if(bColor!=FALSE)
{
color_idx++;
if(color_idx>=8)
{
color_idx=0;
}
InvalidateWindow(hwnd);
}
break;
/////
}
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
if(id==ID_CLOSE)
{
if(event==BTN_UP)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
InvalidateWindow(hwnd);
}
if(id==ID_BORDER)
{
if(event==CBN_SELECTED)
{
bBorder =TRUE;
}
if(event==CBN_UNSELECTED)
{
bBorder =FALSE;
}
InvalidateWindow(hwnd);
}
if(id==ID_BKGND)
{
if(event==CBN_SELECTED)
{
bBKGND =TRUE;
}
if(event==CBN_UNSELECTED)
{
bBKGND =FALSE;
}
InvalidateWindow(hwnd);
}
if(id==ID_COLOR)
{
if(event==CBN_SELECTED)
{
bColor =TRUE;
}
if(event==CBN_UNSELECTED)
{
bColor =FALSE;
}
InvalidateWindow(hwnd);
}
}
break;
////
case MSG_PAINT:
{
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetFillColor(hdc,RGB(200,200,200));
FillRect(hdc,&rc0);
SetRect(&rc,4,10,RectW(&rc0)-4*2,60);
SetTextColor(hdc,DrawText_Color_Tbl[color_idx].text_color);
SetDrawColor(hdc,DrawText_Color_Tbl[color_idx].bd_color);
SetFillColor(hdc,DrawText_Color_Tbl[color_idx].bk_color);
i=DrawText_Cfg_Tbl[cfg_idx].flag;
if(bBorder)
{
i |= DT_BORDER;
}
if(bBKGND)
{
i |= DT_BKGND;
}
DrawText(hdc,DrawText_Cfg_Tbl[cfg_idx].text,-1,&rc,i);
// DrawText(hdc,"DrawText\r\n**绘制字符串**",-1,&rc,DT_BORDER|DT_BKGND|DT_VCENTER|DT_CENTER);
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
/*******************************************************************************
* Function Name: USBFS_1_InitEP_DMA
********************************************************************************
*
* Summary:
* This function allocates and initializes a DMA channel to be used by the
* USBFS_1_LoadInEP() or USBFS_1_ReadOutEP() APIs for data
* transfer.
*
* Parameters:
* epNumber: Contains the data endpoint number.
* Valid values are between 1 and 8.
* *pData: Pointer to a data array that is related to the EP transfers.
*
* Return:
* None.
*
* Reentrant:
* No.
*
*******************************************************************************/
void USBFS_1_InitEP_DMA(uint8 epNumber, const uint8 *pData)
{
uint16 src;
uint16 dst;
#if (CY_PSOC3) /* PSoC 3 */
src = HI16(CYDEV_SRAM_BASE);
dst = HI16(CYDEV_PERIPH_BASE);
pData = pData;
#else /* PSoC 5 */
if((USBFS_1_EP[epNumber].addr & USBFS_1_DIR_IN) != 0u )
{ /* for the IN EP source is the SRAM memory buffer */
src = HI16(pData);
dst = HI16(CYDEV_PERIPH_BASE);
}
else
{ /* for the OUT EP source is the SIE register */
src = HI16(CYDEV_PERIPH_BASE);
dst = HI16(pData);
}
#endif /* End C51 */
switch(epNumber)
{
case USBFS_1_EP1:
#if(USBFS_1_DMA1_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep1_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA1_REMOVE */
break;
case USBFS_1_EP2:
#if(USBFS_1_DMA2_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep2_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA2_REMOVE */
break;
case USBFS_1_EP3:
#if(USBFS_1_DMA3_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep3_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA3_REMOVE */
break;
case USBFS_1_EP4:
#if(USBFS_1_DMA4_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep4_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA4_REMOVE */
break;
case USBFS_1_EP5:
#if(USBFS_1_DMA5_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep5_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA5_REMOVE */
break;
case USBFS_1_EP6:
#if(USBFS_1_DMA6_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep6_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA6_REMOVE */
break;
case USBFS_1_EP7:
#if(USBFS_1_DMA7_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep7_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA7_REMOVE */
break;
case USBFS_1_EP8:
#if(USBFS_1_DMA8_REMOVE == 0u)
USBFS_1_DmaChan[epNumber] = USBFS_1_ep8_DmaInitialize(
USBFS_1_DMA_BYTES_PER_BURST, USBFS_1_DMA_REQUEST_PER_BURST, src, dst);
#endif /* End USBFS_1_DMA8_REMOVE */
break;
default:
/* Do not support EP0 DMA transfers */
break;
}
if((epNumber > USBFS_1_EP0) && (epNumber < USBFS_1_MAX_EP))
{
USBFS_1_DmaTd[epNumber] = CyDmaTdAllocate();
}
}
/*******************************************************************************
* Function Name: main
********************************************************************************
* Summary:
* System entry point. This calls the user SFlash write API when switch SW2
* is pressed during system bootup.
*
* Parameters:
* void
*
* Return:
* int
*
*******************************************************************************/
int main()
{
uint32 data[USER_SFLASH_ROW_SIZE/4];
uint8 *sflashPtr;
uint8 rowIndex;
uint32 dataIndex;
CyGlobalIntEnable; /* Enable system interrupts required for UART operation */
UART_Console_Start(); /* UART is used for UI on the serial port terminal */
if(Write_Switch_Read() == SWITCH_PRESSED) /* If SW2 on BLE pioneer kit baseboard is pressed during startup */
{
for(dataIndex = 0; dataIndex < (USER_SFLASH_ROW_SIZE/4); dataIndex++)
{
data[dataIndex] = SFLASH_STARTING_VALUE + dataIndex; /* Fill the user SFlash write buffer with known data */
}
for(rowIndex = 0; rowIndex < USER_SFLASH_ROWS; rowIndex++) /* Continuously write all the 4 user FLASH rows */
{
uint32 status;
UART_Console_UartPutString("\r\nWriting user SFlash row");
UART_Console_UartPutChar('0' + rowIndex);
/* User SFlash write API will change the IMO frequency to 48MHz internally (which is not desired for any
* peripherals that are operating on IMO based clock (UART in this example). Wait for UART data transfer
* to complete before calling the user SFlash write API */
while((UART_Console_SpiUartGetTxBufferSize() + UART_Console_GET_TX_FIFO_SR_VALID) != 0u);
status = WriteUserSFlashRow(rowIndex, &data[0]);
if(status == USER_SFLASH_WRITE_SUCCESSFUL)
{
UART_Console_UartPutString(" successful");
}
else
{
UART_Console_UartPutString(" failed - ");
UART_Console_UartPutChar(HexToAscii(HI8(HI16(status)),1));
UART_Console_UartPutChar(HexToAscii(HI8(HI16(status)),0));
UART_Console_UartPutChar(HexToAscii(LO8(HI16(status)),1));
UART_Console_UartPutChar(HexToAscii(LO8(HI16(status)),0));
}
}
UART_Console_UartPutString("\r\nUser SFlash write complete\r\n");
}
sflashPtr = (uint8 *)USER_SFLASH_BASE_ADDRESS; /* User SFlash read is direct memory read using pointers */
/* Read all the 512 bytes of user configurable SFlash content and display on UART console */
for(rowIndex = 0; rowIndex < USER_SFLASH_ROWS; rowIndex++)
{
UART_Console_UartPutString("\r\n\nUser SFlash row ");
UART_Console_UartPutChar('0' + rowIndex);
UART_Console_UartPutString(" data:\r\n");
for(dataIndex = 0; dataIndex < USER_SFLASH_ROW_SIZE; dataIndex++)
{
uint8 readData;
readData = *sflashPtr++;
UART_Console_UartPutChar(HexToAscii(readData,1));
UART_Console_UartPutChar(HexToAscii(readData,0));
UART_Console_UartPutChar(' ');
}
}
while(1); /* halt the system */
}
static u32 win_proc(MSG *pMsg)
{
HWND hwnd;
HDC hdc;
RECT rc,rc0;
u32 i;
hwnd =pMsg->hwnd;
switch(pMsg->Code)
{
case MSG_CREATE:
x1_inc =2;
y1_inc =1;
x2_inc =2;
y2_inc =1;
bMoveMainWin=FALSE;
GetClientRect(hwnd,&rc0);
hwnd_BTN1 =CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,RectW(&rc0)-64,RectH(&rc0)-28,60,24,hwnd,ID_CLOSE,NULL);
hwnd_BTN2 =CreateWindow(BUTTON,"关闭",WS_CHILD|BS_NORMAL|WS_BORDER|WS_VISIBLE,4,4,60,24,hwnd,ID_CLOSE,NULL);
CreateWindow(BUTTON,"移动主窗口",WS_CHILD|BS_HOLD|WS_BORDER|WS_VISIBLE,4,RectH(&rc0)-28,100,24,hwnd,ID_MOVE_1,NULL);
GDD_CreateTimer(hwnd,0,200,TMR_START);
GDD_CreateTimer(hwnd,1,150,TMR_START);
GDD_CreateTimer(hwnd,2,100,TMR_START);
break;
////
case MSG_TIMER:
{
switch(pMsg->Param1)
{
case 0:
{
static int x_inc=2;
static int y_inc=1;
if(bMoveMainWin==FALSE)
{
break;
}
GetWindowRect(hwnd,&rc);
if(rc.left > 320)
{
x_inc =-3;
}
if(rc.left <- 200)
{
x_inc =3;
}
if(rc.top > 200)
{
y_inc =-2;
}
if(rc.top < -100)
{
y_inc =2;
}
rc.left+=x_inc;
rc.top+=y_inc;
ScreenToClient(GetParent(hwnd),(POINT*)&rc,2);
MoveWindow(hwnd,rc.left,rc.top);
}
break;
/////
case 1:
{
GetClientRect(hwnd,&rc0);
ClientToScreen(hwnd,(POINT*)&rc0,2);
GetWindowRect(hwnd_BTN1,&rc);
/*
GetWindowRect(hwnd_BTN2,&rc0);
if(IsIntersectRect(&rc,&rc0))
{
x1_inc *=-1;
y1_inc *=-1;
x2_inc *=-1;
y2_inc *=-1;
}
*/
if((rc.right) >= (rc0.right))
{
x1_inc =-3;
}
if(rc.left <= rc0.left)
{
x1_inc =3;
}
if((rc.bottom) >= (rc0.bottom))
{
y1_inc =-2;
}
if(rc.top <= rc0.top)
{
y1_inc =2;
}
rc.left +=x1_inc;
rc.top +=y1_inc;
ScreenToClient(hwnd,(POINT*)&rc,2);
MoveWindow(hwnd_BTN1,rc.left,rc.top);
}
case 2:
{
GetClientRect(hwnd,&rc0);
ClientToScreen(hwnd,(POINT*)&rc0,2);
GetWindowRect(hwnd_BTN2,&rc);
/*
GetWindowRect(hwnd_BTN1,&rc0);
if(IsIntersectRect(&rc,&rc0))
{
x1_inc *=-1;
y1_inc *=-1;
x2_inc *=-1;
y2_inc *=-1;
}
*/
if((rc.right) >= (rc0.right))
{
x2_inc =-2;
}
if(rc.left <= rc0.left)
{
x2_inc =2;
}
if((rc.bottom) >= (rc0.bottom))
{
y2_inc =-1;
}
if(rc.top <= rc0.top)
{
y2_inc =1;
}
rc.left +=x2_inc;
rc.top +=y2_inc;
ScreenToClient(hwnd,(POINT*)&rc,2);
MoveWindow(hwnd_BTN2,rc.left,rc.top);
}
break;
////
default:
break;
}
InvalidateWindow(hwnd);
}
break;
case MSG_NOTIFY:
{
u16 event,id;
event =HI16(pMsg->Param1);
id =LO16(pMsg->Param1);
switch(event)
{
case BTN_DOWN: //按钮按下
if(id==ID_MOVE_1)
{
bMoveMainWin=TRUE;
}
break;
////
case BTN_UP: //按钮弹起
if(id==ID_CLOSE)
{
PostMessage(hwnd,MSG_CLOSE,0,0);
}
if(id==ID_MOVE_1)
{
bMoveMainWin=FALSE;
}
break;
////
default:
break;
}
}
break;
////
case MSG_PAINT:
{
char wbuf[32];
hdc =BeginPaint(hwnd);
GetClientRect(hwnd,&rc0);
SetTextColor(hdc,RGB(0,240,0));
SetFillColor(hdc,RGB(40,40,40));
SetDrawColor(hdc,RGB(0,240,0));
GetWindowRect(hwnd,&rc);
sprintf(wbuf,"当前主窗口位置: %d,%d",rc.left,rc.top);
DrawText(hdc,wbuf,-1,&rc0,DT_LEFT|DT_VCENTER|DT_BORDER|DT_BKGND);
EndPaint(hwnd,hdc);
}
break;
////
default:
return DefWindowProc(pMsg);
}
return 0;
}
/*******************************************************************************
* Function Name: DMA_Config
********************************************************************************
*
* Summary:
* Initializes and sets up DMA for use (generated by DMA Wizard)
*
* Parameters:
* None.
*
* Return:
* None.
*
*******************************************************************************/
void DMA_Config(void)
{
/* Declare variable to hold the handle for DMA channel */
uint8 channelHandle;
/* Declare DMA Transaction Descriptor for memory transfer into
* Filter Channel.
*/
uint8 tdChanA;
/* Configure the DMA to Transfer the data in 1 burst with individual trigger
* for each burst.
*/
channelHandle = DMA_DmaInitialize(BYTES_PER_BURST, REQUEST_PER_BURST,
HI16(UPPER_SRC_ADDRESS), HI16(UPPER_DEST_ADDRESS));
/* This function allocates a TD for use with an initialized DMA channel */
tdChanA = CyDmaTdAllocate();
/* Configure the tdChanA to transfer 1 byte with no next TD */
CyDmaTdSetConfiguration(tdChanA, 1u, DMA_INVALID_TD, 0u);
/* Set the source address as ADC_DelSig and the destination as
* Filter Channel A.
*/
CyDmaTdSetAddress(tdChanA, LO16((uint32)ADC_DelSig_DEC_SAMP_PTR), LO16((uint32)Filter_STAGEAH_PTR));
/* Set tdChanA to be the initial TD associated with channelHandle */
CyDmaChSetInitialTd(channelHandle, tdChanA);
/* Enable the DMA channel represented by channelHandle and preserve the TD */
CyDmaChEnable(channelHandle, 1u);
uint8 DMA_1_Chan;
uint8 DMA_1_TD[1];
DMA_1_Chan = DMA_1_DmaInitialize(DMA_1_BYTES_PER_BURST, DMA_1_REQUEST_PER_BURST,
HI16(DMA_1_SRC_BASE), HI16(DMA_1_DST_BASE));
DMA_1_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_1_TD[0], buffersize, CY_DMA_DISABLE_TD, TD_INC_DST_ADR);
CyDmaTdSetAddress(DMA_1_TD[0], LO16((uint32)Filter_HOLDA_PTR), LO16((uint32)buffer));
CyDmaChSetInitialTd(DMA_1_Chan, DMA_1_TD[0]);
CyDmaChEnable(DMA_1_Chan, 1);
/* Variable declarations for DMA_2 */
/* Move these variable declarations to the top of the function */
uint8 DMA_2_Chan;
uint8 DMA_2_TD[1];
DMA_2_Chan = DMA_2_DmaInitialize(DMA_2_BYTES_PER_BURST, DMA_2_REQUEST_PER_BURST,
HI16(DMA_2_SRC_BASE), HI16(DMA_2_DST_BASE));
DMA_2_TD[0] = CyDmaTdAllocate();
CyDmaTdSetConfiguration(DMA_2_TD[0], 1, CY_DMA_DISABLE_TD, 0);
CyDmaTdSetAddress(DMA_2_TD[0], LO16((uint32)Filter_HOLDA_PTR), LO16((uint32)VDAC8_Data_PTR));
CyDmaChSetInitialTd(DMA_2_Chan, DMA_2_TD[0]);
CyDmaChEnable(DMA_2_Chan, 1);
}
