コード例 #1
0
ファイル: manage.c プロジェクト: RobinSystems/linux-3.13
static int xen_suspend(void *data)
{
	struct suspend_info *si = data;
	int err;

	BUG_ON(!irqs_disabled());

	err = syscore_suspend();
	if (err) {
		pr_err("%s: system core suspend failed: %d\n", __func__, err);
		return err;
	}

	if (si->pre)
		si->pre();

	/*
	 * This hypercall returns 1 if suspend was cancelled
	 * or the domain was merely checkpointed, and 0 if it
	 * is resuming in a new domain.
	 */
	si->cancelled = HYPERVISOR_suspend(si->arg);

	if (si->post)
		si->post(si->cancelled);

	if (!si->cancelled) {
		xen_irq_resume();
		xen_timer_resume();
	}

	syscore_resume();

	return 0;
}
コード例 #2
0
CAMLprim value
stub_hypervisor_suspend(value unit)
{
  CAMLparam0();
  int cancelled;

  printk("WARNING: stub_hypervisor_suspend not yet implemented\n");
  cancelled = 1;
#if 0
  /* Turn the store and console mfns to pfns - required because xc_domain_restore uses these values */
  start_info.store_mfn = mfn_to_pfn(start_info.store_mfn);
  start_info.console.domU.mfn = mfn_to_pfn(start_info.console.domU.mfn);

  /* canonicalize_pagetables can't cope with pagetable entries that are outside of the guest's mfns,
     so we must unmap anything outside of our space */
  unmap_shared_info();

  /* Actually do the suspend. When this function returns 0, we've been resumed */
  cancelled = HYPERVISOR_suspend(virt_to_mfn(&start_info));

  if(cancelled) {
    start_info.store_mfn = pfn_to_mfn(start_info.store_mfn);
    start_info.console.domU.mfn = pfn_to_mfn(start_info.console.domU.mfn);
  }

  /* Reinitialise several things */
  trap_init();
  init_events();

  /* ENABLE EVENT DELIVERY. This is disabled at start of day. */
  local_irq_enable();

  setup_xen_features();
  HYPERVISOR_shared_info = map_shared_info(start_info.shared_info);

  /* Set up event and failsafe callback addresses. */
  HYPERVISOR_set_callbacks(
						   (unsigned long)hypervisor_callback,
						   (unsigned long)failsafe_callback, 0);

  init_time();
  arch_rebuild_p2m();

  unmask_evtchn(start_info.console.domU.evtchn);
  unmask_evtchn(start_info.store_evtchn);
#endif
  CAMLreturn(Val_int(cancelled));
}
コード例 #3
0
ファイル: control.c プロジェクト: ornarium/freebsd
/* HVM mode suspension. */
static void
xctrl_suspend()
{
	int suspend_cancelled;

	EVENTHANDLER_INVOKE(power_suspend);

	/*
	 * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE
	 * drivers need this.
	 */
	mtx_lock(&Giant);
	if (DEVICE_SUSPEND(root_bus) != 0) {
		mtx_unlock(&Giant);
		printf("%s: device_suspend failed\n", __func__);
		return;
	}
	mtx_unlock(&Giant);

	/*
	 * Prevent any races with evtchn_interrupt() handler.
	 */
	disable_intr();
	irq_suspend();

	suspend_cancelled = HYPERVISOR_suspend(0);
	if (suspend_cancelled)
		irq_resume();
	else
		xenpci_resume();

	/*
	 * Re-enable interrupts and put the scheduler back to normal.
	 */
	enable_intr();

	/*
	 * FreeBSD really needs to add DEVICE_SUSPEND_CANCEL or
	 * similar.
	 */
	mtx_lock(&Giant);
	if (!suspend_cancelled)
		DEVICE_RESUME(root_bus);
	mtx_unlock(&Giant);

	EVENTHANDLER_INVOKE(power_resume);
}
コード例 #4
0
static int xen_suspend(void *data)
{
	int *cancelled = data;
	int err;

	BUG_ON(!irqs_disabled());

	load_cr3(swapper_pg_dir);

	err = device_power_down(PMSG_SUSPEND);
	if (err) {
		printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n",
		       err);
		return err;
	}

	xen_mm_pin_all();
	gnttab_suspend();
	xen_pre_suspend();

	/*
	 * This hypercall returns 1 if suspend was cancelled
	 * or the domain was merely checkpointed, and 0 if it
	 * is resuming in a new domain.
	 */
	*cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info));

	xen_post_suspend(*cancelled);
	gnttab_resume();
	xen_mm_unpin_all();

	device_power_up(PMSG_RESUME);

	if (!*cancelled) {
		xen_irq_resume();
		xen_console_resume();
		xen_timer_resume();
	}

	return 0;
}
コード例 #5
0
ファイル: manage.c プロジェクト: MaxChina/linux
static int xen_suspend(void *data)
{
	struct suspend_info *si = data;
	int err;

	BUG_ON(!irqs_disabled());

	err = syscore_suspend();
	if (err) {
		pr_err("%s: system core suspend failed: %d\n", __func__, err);
		return err;
	}

	gnttab_suspend();
	xen_arch_pre_suspend();

	/*
	 * This hypercall returns 1 if suspend was cancelled
	 * or the domain was merely checkpointed, and 0 if it
	 * is resuming in a new domain.
	 */
	si->cancelled = HYPERVISOR_suspend(xen_pv_domain()
                                           ? virt_to_mfn(xen_start_info)
                                           : 0);

	xen_arch_post_suspend(si->cancelled);
	gnttab_resume();

	if (!si->cancelled) {
		xen_irq_resume();
		xen_console_resume();
		xen_timer_resume();
	}

	syscore_resume();

	return 0;
}
コード例 #6
0
ファイル: manage.c プロジェクト: LittleForker/linux-2.6
static int xen_suspend(void *data)
{
	struct suspend_info *si = data;
	int err;

	BUG_ON(!irqs_disabled());

	err = sysdev_suspend(PMSG_FREEZE);
	if (err) {
		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
			err);
		return err;
	}

	if (si->pre)
		si->pre();

	/*
	 * This hypercall returns 1 if suspend was cancelled
	 * or the domain was merely checkpointed, and 0 if it
	 * is resuming in a new domain.
	 */
	si->cancelled = HYPERVISOR_suspend(si->arg);

	if (si->post)
		si->post(si->cancelled);

	if (!si->cancelled) {
		xen_irq_resume();
		xen_console_resume();
		xen_timer_resume();
	}

	sysdev_resume();

	return 0;
}
コード例 #7
0
static int __do_suspend(void *ignore)
{
	int err;

	extern void time_resume(void);

	BUG_ON(smp_processor_id() != 0);
	BUG_ON(in_interrupt());

#if defined(__i386__) || defined(__x86_64__)
	if (xen_feature(XENFEAT_auto_translated_physmap)) {
		printk(KERN_WARNING "Cannot suspend in "
		       "auto_translated_physmap mode.\n");
		return -EOPNOTSUPP;
	}
#endif

	err = smp_suspend();
	if (err)
		return err;

	xenbus_suspend();

	preempt_disable();

#ifdef __i386__
	kmem_cache_shrink(pgd_cache);
#endif
	mm_pin_all();
	local_irq_disable();
	preempt_enable();

	gnttab_suspend();

	pre_suspend();

	/*
	 * We'll stop somewhere inside this hypercall. When it returns,
	 * we'll start resuming after the restore.
	 */
	HYPERVISOR_suspend(virt_to_mfn(xen_start_info));

	shutting_down = SHUTDOWN_INVALID;

	post_suspend();

	gnttab_resume();

	irq_resume();

	time_resume();

	switch_idle_mm();

	local_irq_enable();

	xencons_resume();

	xenbus_resume();

	smp_resume();

	return err;
}
コード例 #8
0
/*
 * Top level routine to direct suspend/resume of a domain.
 */
void
xen_suspend_domain(void)
{
	extern void rtcsync(void);
	extern hrtime_t hres_last_tick;
	mfn_t start_info_mfn;
	ulong_t flags;
	pfn_t pfn;
	int i;

	/*
	 * Check that we are happy to suspend on this hypervisor.
	 */
	if (xen_hypervisor_supports_solaris(XEN_SUSPEND_CHECK) == 0) {
		cpr_err(CE_WARN, "Cannot suspend on this hypervisor "
		    "version: v%lu.%lu%s, need at least version v3.0.4 or "
		    "-xvm based hypervisor", XENVER_CURRENT(xv_major),
		    XENVER_CURRENT(xv_minor), XENVER_CURRENT(xv_ver));
		return;
	}

	/*
	 * XXPV - Are we definitely OK to suspend by the time we've connected
	 * the handler?
	 */

	cpr_err(CE_NOTE, "Domain suspending for save/migrate");

	SUSPEND_DEBUG("xen_suspend_domain\n");

	/*
	 * suspend interrupts and devices
	 * XXPV - we use suspend/resume for both save/restore domains (like sun
	 * cpr) and for migration.  Would be nice to know the difference if
	 * possible.  For save/restore where down time may be a long time, we
	 * may want to do more of the things that cpr does.  (i.e. notify user
	 * processes, shrink memory footprint for faster restore, etc.)
	 */
	xen_suspend_devices();
	SUSPEND_DEBUG("xenbus_suspend\n");
	xenbus_suspend();

	pfn = hat_getpfnum(kas.a_hat, (caddr_t)xen_info);
	start_info_mfn = pfn_to_mfn(pfn);

	/*
	 * XXPV: cpu hotplug can hold this under a xenbus watch. Are we safe
	 * wrt xenbus being suspended here?
	 */
	mutex_enter(&cpu_lock);

	/*
	 * Suspend must be done on vcpu 0, as no context for other CPUs is
	 * saved.
	 *
	 * XXPV - add to taskq API ?
	 */
	thread_affinity_set(curthread, 0);
	kpreempt_disable();

	SUSPEND_DEBUG("xen_start_migrate\n");
	xen_start_migrate();
	if (ncpus > 1)
		suspend_cpus();

	/*
	 * We can grab the ec_lock as it's a spinlock with a high SPL. Hence
	 * any holder would have dropped it to get through suspend_cpus().
	 */
	mutex_enter(&ec_lock);

	/*
	 * From here on in, we can't take locks.
	 */
	SUSPEND_DEBUG("ec_suspend\n");
	ec_suspend();
	SUSPEND_DEBUG("gnttab_suspend\n");
	gnttab_suspend();

	flags = intr_clear();

	xpv_time_suspend();

	/*
	 * Currently, the hypervisor incorrectly fails to bring back
	 * powered-down VCPUs.  Thus we need to record any powered-down VCPUs
	 * to prevent any attempts to operate on them.  But we have to do this
	 * *after* the very first time we do ec_suspend().
	 */
	for (i = 1; i < ncpus; i++) {
		if (cpu[i] == NULL)
			continue;

		if (cpu_get_state(cpu[i]) == P_POWEROFF)
			CPUSET_ATOMIC_ADD(cpu_suspend_lost_set, i);
	}

	/*
	 * The dom0 save/migrate code doesn't automatically translate
	 * these into PFNs, but expects them to be, so we do it here.
	 * We don't use mfn_to_pfn() because so many OS services have
	 * been disabled at this point.
	 */
	xen_info->store_mfn = mfn_to_pfn_mapping[xen_info->store_mfn];
	xen_info->console.domU.mfn =
	    mfn_to_pfn_mapping[xen_info->console.domU.mfn];

	if (CPU->cpu_m.mcpu_vcpu_info->evtchn_upcall_mask == 0) {
		prom_printf("xen_suspend_domain(): "
		    "CPU->cpu_m.mcpu_vcpu_info->evtchn_upcall_mask not set\n");
		(void) HYPERVISOR_shutdown(SHUTDOWN_crash);
	}

	if (HYPERVISOR_update_va_mapping((uintptr_t)HYPERVISOR_shared_info,
	    0, UVMF_INVLPG)) {
		prom_printf("xen_suspend_domain(): "
		    "HYPERVISOR_update_va_mapping() failed\n");
		(void) HYPERVISOR_shutdown(SHUTDOWN_crash);
	}

	SUSPEND_DEBUG("HYPERVISOR_suspend\n");

	/*
	 * At this point we suspend and sometime later resume.
	 */
	if (HYPERVISOR_suspend(start_info_mfn)) {
		prom_printf("xen_suspend_domain(): "
		    "HYPERVISOR_suspend() failed\n");
		(void) HYPERVISOR_shutdown(SHUTDOWN_crash);
	}

	/*
	 * Point HYPERVISOR_shared_info to its new value.
	 */
	if (HYPERVISOR_update_va_mapping((uintptr_t)HYPERVISOR_shared_info,
	    xen_info->shared_info | PT_NOCONSIST | PT_VALID | PT_WRITABLE,
	    UVMF_INVLPG))
		(void) HYPERVISOR_shutdown(SHUTDOWN_crash);

	if (xen_info->nr_pages != mfn_count) {
		prom_printf("xen_suspend_domain(): number of pages"
		    " changed, was 0x%lx, now 0x%lx\n", mfn_count,
		    xen_info->nr_pages);
		(void) HYPERVISOR_shutdown(SHUTDOWN_crash);
	}

	xpv_time_resume();

	cached_max_mfn = 0;

	SUSPEND_DEBUG("gnttab_resume\n");
	gnttab_resume();

	/* XXPV: add a note that this must be lockless. */
	SUSPEND_DEBUG("ec_resume\n");
	ec_resume();

	intr_restore(flags);

	if (ncpus > 1)
		resume_cpus();

	mutex_exit(&ec_lock);
	xen_end_migrate();
	mutex_exit(&cpu_lock);

	/*
	 * Now we can take locks again.
	 */

	/*
	 * Force the tick value used for tv_nsec in hres_tick() to be up to
	 * date. rtcsync() will reset the hrestime value appropriately.
	 */
	hres_last_tick = xpv_gethrtime();

	/*
	 * XXPV: we need to have resumed the CPUs since this takes locks, but
	 * can remote CPUs see bad state? Presumably yes. Should probably nest
	 * taking of todlock inside of cpu_lock, or vice versa, then provide an
	 * unlocked version.  Probably need to call clkinitf to reset cpu freq
	 * and re-calibrate if we migrated to a different speed cpu.  Also need
	 * to make a (re)init_cpu_info call to update processor info structs
	 * and device tree info.  That remains to be written at the moment.
	 */
	rtcsync();

	rebuild_mfn_list();

	SUSPEND_DEBUG("xenbus_resume\n");
	xenbus_resume();
	SUSPEND_DEBUG("xenbus_resume_devices\n");
	xen_resume_devices();

	thread_affinity_clear(curthread);
	kpreempt_enable();

	SUSPEND_DEBUG("finished xen_suspend_domain\n");

	/*
	 * We have restarted our suspended domain, update the hypervisor
	 * details. NB: This must be done at the end of this function,
	 * since we need the domain to be completely resumed before
	 * these functions will work correctly.
	 */
	xen_set_version(XENVER_CURRENT_IDX);

	/*
	 * We can check and report a warning, but we don't stop the
	 * process.
	 */
	if (xen_hypervisor_supports_solaris(XEN_SUSPEND_CHECK) == 0)
		cmn_err(CE_WARN, "Found hypervisor version: v%lu.%lu%s "
		    "but need at least version v3.0.4",
		    XENVER_CURRENT(xv_major), XENVER_CURRENT(xv_minor),
		    XENVER_CURRENT(xv_ver));

	cmn_err(CE_NOTE, "domain restore/migrate completed");
}
コード例 #9
0
ファイル: control.c プロジェクト: cyrilmagsuci/freebsd
static void
xctrl_suspend()
{
#ifdef SMP
	cpuset_t cpu_suspend_map;
#endif
	int suspend_cancelled;

	EVENTHANDLER_INVOKE(power_suspend);

	if (smp_started) {
		thread_lock(curthread);
		sched_bind(curthread, 0);
		thread_unlock(curthread);
	}
	KASSERT((PCPU_GET(cpuid) == 0), ("Not running on CPU#0"));

	/*
	 * Clear our XenStore node so the toolstack knows we are
	 * responding to the suspend request.
	 */
	xs_write(XST_NIL, "control", "shutdown", "");

	/*
	 * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE
	 * drivers need this.
	 */
	mtx_lock(&Giant);
	if (DEVICE_SUSPEND(root_bus) != 0) {
		mtx_unlock(&Giant);
		printf("%s: device_suspend failed\n", __func__);
		return;
	}
	mtx_unlock(&Giant);

#ifdef SMP
	CPU_ZERO(&cpu_suspend_map);	/* silence gcc */
	if (smp_started) {
		/*
		 * Suspend other CPUs. This prevents IPIs while we
		 * are resuming, and will allow us to reset per-cpu
		 * vcpu_info on resume.
		 */
		cpu_suspend_map = all_cpus;
		CPU_CLR(PCPU_GET(cpuid), &cpu_suspend_map);
		if (!CPU_EMPTY(&cpu_suspend_map))
			suspend_cpus(cpu_suspend_map);
	}
#endif

	/*
	 * Prevent any races with evtchn_interrupt() handler.
	 */
	disable_intr();
	intr_suspend();
	xen_hvm_suspend();

	suspend_cancelled = HYPERVISOR_suspend(0);

	xen_hvm_resume(suspend_cancelled != 0);
	intr_resume(suspend_cancelled != 0);
	enable_intr();

	/*
	 * Reset grant table info.
	 */
	gnttab_resume(NULL);

#ifdef SMP
	/* Send an IPI_BITMAP in case there are pending bitmap IPIs. */
	lapic_ipi_vectored(IPI_BITMAP_VECTOR, APIC_IPI_DEST_ALL);
	if (smp_started && !CPU_EMPTY(&cpu_suspend_map)) {
		/*
		 * Now that event channels have been initialized,
		 * resume CPUs.
		 */
		resume_cpus(cpu_suspend_map);
	}
#endif

	/*
	 * FreeBSD really needs to add DEVICE_SUSPEND_CANCEL or
	 * similar.
	 */
	mtx_lock(&Giant);
	DEVICE_RESUME(root_bus);
	mtx_unlock(&Giant);

	if (smp_started) {
		thread_lock(curthread);
		sched_unbind(curthread);
		thread_unlock(curthread);
	}

	EVENTHANDLER_INVOKE(power_resume);

	if (bootverbose)
		printf("System resumed after suspension\n");

}
コード例 #10
0
ファイル: reboot.c プロジェクト: BackupTheBerlios/arp2-svn
static int __do_suspend(void *ignore)
{
	int i, j, k, fpp, err;

	extern unsigned long max_pfn;
	extern unsigned long *pfn_to_mfn_frame_list_list;
	extern unsigned long *pfn_to_mfn_frame_list[];

	extern void time_resume(void);

	BUG_ON(smp_processor_id() != 0);
	BUG_ON(in_interrupt());

	if (xen_feature(XENFEAT_auto_translated_physmap)) {
		printk(KERN_WARNING "Cannot suspend in "
		       "auto_translated_physmap mode.\n");
		return -EOPNOTSUPP;
	}

	err = smp_suspend();
	if (err)
		return err;

	xenbus_suspend();

	preempt_disable();

#ifdef __i386__
	kmem_cache_shrink(pgd_cache);
#endif
	mm_pin_all();

	__cli();
	preempt_enable();

	gnttab_suspend();

	HYPERVISOR_shared_info = (shared_info_t *)empty_zero_page;
	clear_fixmap(FIX_SHARED_INFO);

	xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn);
	xen_start_info->console_mfn = mfn_to_pfn(xen_start_info->console_mfn);

	/*
	 * We'll stop somewhere inside this hypercall. When it returns,
	 * we'll start resuming after the restore.
	 */
	HYPERVISOR_suspend(virt_to_mfn(xen_start_info));

	shutting_down = SHUTDOWN_INVALID;

	set_fixmap(FIX_SHARED_INFO, xen_start_info->shared_info);

	HYPERVISOR_shared_info = (shared_info_t *)fix_to_virt(FIX_SHARED_INFO);

	memset(empty_zero_page, 0, PAGE_SIZE);

	HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
		virt_to_mfn(pfn_to_mfn_frame_list_list);

	fpp = PAGE_SIZE/sizeof(unsigned long);
	for (i = 0, j = 0, k = -1; i < max_pfn; i += fpp, j++) {
		if ((j % fpp) == 0) {
			k++;
			pfn_to_mfn_frame_list_list[k] =
				virt_to_mfn(pfn_to_mfn_frame_list[k]);
			j = 0;
		}
		pfn_to_mfn_frame_list[k][j] =
			virt_to_mfn(&phys_to_machine_mapping[i]);
	}
	HYPERVISOR_shared_info->arch.max_pfn = max_pfn;

	gnttab_resume();

	irq_resume();

	time_resume();

	switch_idle_mm();

	__sti();

	xencons_resume();

	xenbus_resume();

	smp_resume();

	return err;
}
コード例 #11
0
ファイル: control.c プロジェクト: coyizumi/cs111
/* Full PV mode suspension. */
static void
xctrl_suspend()
{
	int i, j, k, fpp, suspend_cancelled;
	unsigned long max_pfn, start_info_mfn;

	EVENTHANDLER_INVOKE(power_suspend);

#ifdef SMP
	struct thread *td;
	cpuset_t map;
	u_int cpuid;

	/*
	 * Bind us to CPU 0 and stop any other VCPUs.
	 */
	td = curthread;
	thread_lock(td);
	sched_bind(td, 0);
	thread_unlock(td);
	cpuid = PCPU_GET(cpuid);
	KASSERT(cpuid == 0, ("xen_suspend: not running on cpu 0"));

	map = all_cpus;
	CPU_CLR(cpuid, &map);
	CPU_NAND(&map, &stopped_cpus);
	if (!CPU_EMPTY(&map))
		stop_cpus(map);
#endif

	/*
	 * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE
	 * drivers need this.
	 */
	mtx_lock(&Giant);
	if (DEVICE_SUSPEND(root_bus) != 0) {
		mtx_unlock(&Giant);
		printf("%s: device_suspend failed\n", __func__);
#ifdef SMP
		if (!CPU_EMPTY(&map))
			restart_cpus(map);
#endif
		return;
	}
	mtx_unlock(&Giant);

	local_irq_disable();

	xencons_suspend();
	gnttab_suspend();
	intr_suspend();

	max_pfn = HYPERVISOR_shared_info->arch.max_pfn;

	void *shared_info = HYPERVISOR_shared_info;
	HYPERVISOR_shared_info = NULL;
	pmap_kremove((vm_offset_t) shared_info);
	PT_UPDATES_FLUSH();

	xen_start_info->store_mfn = MFNTOPFN(xen_start_info->store_mfn);
	xen_start_info->console.domU.mfn = MFNTOPFN(xen_start_info->console.domU.mfn);

	/*
	 * We'll stop somewhere inside this hypercall. When it returns,
	 * we'll start resuming after the restore.
	 */
	start_info_mfn = VTOMFN(xen_start_info);
	pmap_suspend();
	suspend_cancelled = HYPERVISOR_suspend(start_info_mfn);
	pmap_resume();

	pmap_kenter_ma((vm_offset_t) shared_info, xen_start_info->shared_info);
	HYPERVISOR_shared_info = shared_info;

	HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
		VTOMFN(xen_pfn_to_mfn_frame_list_list);
  
	fpp = PAGE_SIZE/sizeof(unsigned long);
	for (i = 0, j = 0, k = -1; i < max_pfn; i += fpp, j++) {
		if ((j % fpp) == 0) {
			k++;
			xen_pfn_to_mfn_frame_list_list[k] = 
				VTOMFN(xen_pfn_to_mfn_frame_list[k]);
			j = 0;
		}
		xen_pfn_to_mfn_frame_list[k][j] = 
			VTOMFN(&xen_phys_machine[i]);
	}
	HYPERVISOR_shared_info->arch.max_pfn = max_pfn;

	gnttab_resume();
	intr_resume(suspend_cancelled != 0);
	local_irq_enable();
	xencons_resume();

#ifdef CONFIG_SMP
	for_each_cpu(i)
		vcpu_prepare(i);

#endif

	/* 
	 * Only resume xenbus /after/ we've prepared our VCPUs; otherwise
	 * the VCPU hotplug callback can race with our vcpu_prepare
	 */
	mtx_lock(&Giant);
	DEVICE_RESUME(root_bus);
	mtx_unlock(&Giant);

#ifdef SMP
	thread_lock(curthread);
	sched_unbind(curthread);
	thread_unlock(curthread);
	if (!CPU_EMPTY(&map))
		restart_cpus(map);
#endif
	EVENTHANDLER_INVOKE(power_resume);
}