NDIS_STATUS
HwSetChannel(
_In_ PHW Hw,
_In_ ULONG PhyId,
_In_ UCHAR Channel
)
{
// Must only be called for the active phy
MPASSERT(PhyId == Hw->PhyState.OperatingPhyId);
// When setting the channel, we dont check if we are not already on that
// channel. This is because this may be called after setting a PhyID and
// that does not necessarily set the channel
HW_ACQUIRE_HARDWARE_LOCK(Hw, FALSE);
HW_SET_ADAPTER_STATUS(Hw, HW_ADAPTER_IN_CHANNEL_SWITCH);
HW_RELEASE_HARDWARE_LOCK(Hw, FALSE);
// Wait for active send threads to finish. We dont wait
// for anything else on an HAL reset since some of those
// operations themselves may be causing the reset (Eg. channel
// switch of a scan)
HW_WAIT_FOR_ACTIVE_SENDS_TO_FINISH(Hw);
// MpTrace(COMP_TESTING, DBG_SERIOUS, ("HwSetChannel \n"));
HwDisableInterrupt(Hw, HW_ISR_TRACKING_CHANNEL);
// Flush the sends
HwFlushSendEngine(Hw, FALSE);
HalSwitchChannel(Hw->Hal,
PhyId,
Channel,
FALSE
);
HwResetSendEngine(Hw, FALSE);
HwResetReceiveEngine(Hw, FALSE);
HalStartReceive(Hw->Hal);
// MpTrace(COMP_TESTING, DBG_SERIOUS, ("HwSetChannel \n"));
HwEnableInterrupt(Hw, HW_ISR_TRACKING_CHANNEL);
HW_CLEAR_ADAPTER_STATUS(Hw, HW_ADAPTER_IN_CHANNEL_SWITCH);
return NDIS_STATUS_SUCCESS;
}
NDIS_STATUS
HwResetHAL(
__in PHW Hw,
__in PHW_HAL_RESET_PARAMETERS ResetParams,
__in BOOLEAN DispatchLevel
)
{
UNREFERENCED_PARAMETER(ResetParams);
UNREFERENCED_PARAMETER(DispatchLevel);
MPASSERT(!DispatchLevel);
// Since we wait, we cannot be called at dispatch
HW_ACQUIRE_HARDWARE_LOCK(Hw, FALSE);
HW_SET_ADAPTER_STATUS(Hw, HW_ADAPTER_HAL_IN_RESET);
HW_RELEASE_HARDWARE_LOCK(Hw, FALSE);
// Wait for active send threads to finish. We dont wait
// for anything else on an HAL reset since some of those
// operations themselves may be causing the reset (Eg. channel
// switch of a scan)
HW_WAIT_FOR_ACTIVE_SENDS_TO_FINISH(Hw);
HwDisableInterrupt(Hw, HW_ISR_TRACKING_HAL_RESET);
if (ResetParams->FullReset)
{
// Perform a full reset of the HW
HalResetStart(Hw->Hal);
HalStop(Hw->Hal);
// Reset the send and receive engine
HwWaitForPendingReceives(Hw, NULL);
HwResetSendEngine(Hw, FALSE);
HwResetReceiveEngine(Hw, FALSE);
// Remove old keys, etc
HwClearNicState(Hw);
// Reset our MAC & PHY state
HwResetSoftwareMacState(Hw);
HwResetSoftwarePhyState(Hw);
HalStart(Hw->Hal, TRUE);
// Push the new state on the hardware
HwSetNicState(Hw);
HalResetEnd(Hw->Hal);
}
else
{
// TODO: Currently we are overloading the HalSwitchChannel API for doing a HalReset
HalSwitchChannel(Hw->Hal,
Hw->PhyState.OperatingPhyId,
HalGetPhyMIB(Hw->Hal, Hw->PhyState.OperatingPhyId)->Channel,
FALSE
);
HwResetReceiveEngine(Hw, FALSE);
HwResetSendEngine(Hw, FALSE);
HalStartReceive(Hw->Hal);
}
HwEnableInterrupt(Hw, HW_ISR_TRACKING_HAL_RESET);
HW_CLEAR_ADAPTER_STATUS(Hw, HW_ADAPTER_HAL_IN_RESET);
return NDIS_STATUS_SUCCESS;
}