void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
if( item->GetLayer() == LAYER_BUS )
break;
// Fall thru if item is not on bus layer.
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
// The easiest way to handle a drag component or sheet command
// is to simulate a block drag command
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
if( !HandleBlockBegin( &dc, BLOCK_DRAG, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
IO_MGR::PCB_FILE_T pluginType = plugin_type( aFullFileName, aCtl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep trace of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not append, so mark existing tracks to know what are
// the new tracks
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are append to the item list, so keep trace to the
// last existing item is enough
MODULE* module = GetBoard()->m_Modules.GetLast();
BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
int zonescount = GetBoard()->GetAreaCount();
// Keep also the count of copper layers, because we can happen boards
// with different copper layers counts,
// and the enabled layers
int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
GetDesignSettings().m_NetClasses.Clear();
pi->Load( aFullFileName, GetBoard(), &props );
}
catch( const IO_ERROR& ioe )
{
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->ClearFlags( FLAG0 );
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.What() )
);
DisplayError( this, msg );
return false;
}
// Now prepare a block move command to place the new items, and
// prepare the undo command.
BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
EDA_RECT bbox; // the new items bounding box, for block move
bool bboxInit = true; // true until the bounding box is initialized
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
track->SetFlags( IS_MOVED );
picker.SetItem( track );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = track->GetBoundingBox();
else
bbox.Merge( track->GetBoundingBox() );
bboxInit = false;
}
if( module )
module = module->Next();
else
module = GetBoard()->m_Modules;
for( ; module; module = module->Next() )
{
module->SetFlags( IS_MOVED );
picker.SetItem( module );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = module->GetBoundingBox();
else
bbox.Merge( module->GetBoundingBox() );
bboxInit = false;
}
if( drawing )
drawing = drawing->Next();
else
drawing = GetBoard()->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
drawing->SetFlags( IS_MOVED );
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = drawing->GetBoundingBox();
else
bbox.Merge( drawing->GetBoundingBox() );
bboxInit = false;
}
for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
zone = GetBoard()->GetArea( zonescount ) )
{
zone->SetFlags( IS_MOVED );
picker.SetItem( zone );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
zonescount++;
if( bboxInit )
bbox = zone->GetBoundingBox();
else
bbox.Merge( zone->GetBoundingBox() );
bboxInit = false;
}
SaveCopyInUndoList( undoListPicker, UR_NEW );
// we should not ask PLUGINs to do these items:
int copperLayerCount = GetBoard()->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
GetBoard()->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = GetBoard()->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
GetBoard()->SetEnabledLayers( enabledLayers );
GetBoard()->SetVisibleLayers( enabledLayers );
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
GetBoard()->BuildListOfNets();
GetBoard()->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// Finish block move command:
wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
blockmove.SetOrigin( bbox.GetOrigin() );
blockmove.SetSize( bbox.GetSize() );
blockmove.SetLastCursorPosition( cpos );
HandleBlockEnd( NULL );
return true;
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
// The easiest way to handle a menu or a hot key drag command
// is to simulate a block drag command
//
// When a drag item is requested, some items use a BLOCK_DRAG_ITEM drag type
// an some items use a BLOCK_DRAG drag type (mainly a junction)
// a BLOCK_DRAG collects all items in a block (here a 2x2 rect centered on the cursor)
// and BLOCK_DRAG_ITEM drag only the selected item
BLOCK_COMMAND_T dragType = BLOCK_DRAG_ITEM;
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
// When a junction or a node is found, a BLOCK_DRAG is better
if( m_collectedItems.IsCorner() || m_collectedItems.IsNode( false )
|| m_collectedItems.IsDraggableJunction() )
dragType = BLOCK_DRAG;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( !HandleBlockBegin( &dc, dragType, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
