コード例 #1
0
ファイル: int6k.c プロジェクト: JeremySavonet/open-plc-utils
static void manager (struct plc * plc, signed count, signed pause)

{
	while (count--)
	{
		if (_anyset (plc->flags, PLC_VERSION))
		{
			VersionInfo1 (plc);
		}
		if (_anyset (plc->flags, PLC_ATTRIBUTES))
		{
			Attributes1 (plc);
		}
		if (_anyset (plc->flags, PLC_WATCHDOG_REPORT))
		{
			WatchdogReport (plc);
		}
		if (_anyset (plc->flags, PLC_NVRAM_INFO))
		{
			NVRAMInfo (plc);
		}
		if (_anyset (plc->flags, PLC_SDRAM_INFO))
		{
			SDRAMInfo (plc);
		}
		if (_anyset (plc->flags, PLC_READ_IDENTITY))
		{
			Identity1 (plc);
		}
		if (_anyset (plc->flags, PLC_NETWORK))
		{
			NetInfo1 (plc);
		}
		if (_anyset (plc->flags, PLC_SDRAM_CONFIG))
		{
			WriteCFG (plc);
		}
		if (_anyset (plc->flags, PLC_WRITE_MAC))
		{
			WriteNVM (plc);
		}
		if (_anyset (plc->flags, PLC_READ_MAC))
		{
			ReadFirmware1 (plc);
		}
		if (_anyset (plc->flags, PLC_WRITE_PIB))
		{
			WritePIB (plc);
		}
		if (_anyset (plc->flags, PLC_READ_PIB))
		{
			ReadParameters1 (plc);
		}
		if (_anyset (plc->flags, PLC_HOST_ACTION))
		{
			HostActionResponse (plc);
		}
		if (_anyset (plc->flags, PLC_PUSH_BUTTON))
		{
			PushButton (plc);
		}
		if (_anyset (plc->flags, (PLC_SETLOCALKEY | PLC_SETREMOTEKEY)))
		{
			SetNMK (plc);
		}
		if (_anyset (plc->flags, PLC_FACTORY_DEFAULTS))
		{
			FactoryDefaults (plc);
		}
		if (_anyset (plc->flags, PLC_FLASH_DEVICE))
		{
			FlashNVM (plc);
			WaitForRestart (plc);
		}
		if (_anyset (plc->flags, PLC_RESET_DEVICE))
		{
			ResetDevice (plc);
		}
		sleep (pause);
	}
	return;
}
コード例 #2
0
signed EmulateHost (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);
	static char const * actions [] =
	{
		"start device",
		"store firmware",
		"store parameters",
		"update host",
		"config memory",
		"restore defaults",
		"unknown"
	};

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);

#if 0

	struct __packed vs_host_action_rsp
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
	}
	* response = (struct vs_host_action_rsp *) (message);

#endif

#ifndef __GNUC__
#pragma pack (pop)
#endif

	struct nvm_header1 nvm_header;
	struct pib_header pib_header;
	uint32_t offset;
	char const * PIB = plc->PIB.name;
	char const * NVM = plc->NVM.name;
	signed timer = channel->timeout;
	signed status = 0;
	Request (plc, "Waiting for Host Action");
	while (1)
	{
		channel->timeout = plc->timer;
		status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
		channel->timeout = timer;
		if (status < 0)
		{
			break;
		}
		if (status > 0)
		{
			printf ("\n");
			if (indicate->MACTION < (sizeof (actions) / sizeof (char const *)))
			{
				Confirm (plc, "Host Action Request is (%d) %s.", indicate->MACTION, actions [indicate->MACTION]);
			}
			else
			{
				error (0, ENOTSUP, "Host Action 0x%0X", indicate->MACTION);
				continue;
			}
			memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
			channel->timeout = timer;
			if (indicate->MACTION == 0x00)
			{
				unsigned module = 0;
				char firmware [PLC_VERSION_STRING];
				if (HostActionResponse (plc))
				{
					return (-1);
				}
				if (lseek (plc->PIB.file, 0, SEEK_SET))
				{
					error (1, errno, FILE_CANTHOME, plc->PIB.name);
				}
				if (read (plc->PIB.file, &pib_header, sizeof (pib_header)) != sizeof (pib_header))
				{
					error (1, errno, FILE_CANTREAD, plc->PIB.name);
				}
				if (lseek (plc->PIB.file, 0, SEEK_SET))
				{
					error (1, errno, FILE_CANTHOME, plc->PIB.name);
				}
				if (BE16TOH (*(uint16_t *)(&pib_header)) < 0x0305)
				{
					offset = LEGACY_PIBOFFSET;
				}
				else if (BE16TOH (*(uint16_t *)(&pib_header)) < 0x0500)
				{
					offset = INT6x00_PIBOFFSET;
				}
				else
				{
					offset = AR7x00_PIBOFFSET;
				}
				if (WriteMEM (plc, &plc->PIB, 0, offset, LE16TOH (pib_header.PIBLENGTH)))
				{
					return (-1);
				}
				if (lseek (plc->NVM.file, 0, SEEK_SET))
				{
					error (1, errno, FILE_CANTHOME, plc->NVM.name);
				}
				if (read (plc->NVM.file, &nvm_header, sizeof (nvm_header)) != sizeof (nvm_header))
				{
					error (1, errno, FILE_CANTREAD, plc->NVM.name);
				}
				while (nvm_header.NEXTHEADER)
				{
					lseek (plc->NVM.file, LE32TOH (nvm_header.NEXTHEADER), SEEK_SET);
					if (read (plc->NVM.file, &nvm_header, sizeof (nvm_header)) != sizeof (nvm_header))
					{
						error (1, errno, FILE_CANTREAD, plc->NVM.name);
					}
					module++;
				}
				if (WriteFirmware1 (plc, module, &nvm_header))
				{
					return (-1);
				}
				if (StartFirmware1 (plc, module, &nvm_header))
				{
					return (-1);
				}
				if (WaitForStart (plc, firmware, sizeof (firmware)))
				{
					return (-1);
				}
				if (_anyset (plc->flags, PLC_FLASH_DEVICE))
				{
					if (WriteNVM (plc))
					{
						return (-1);
					}
					if (WritePIB (plc))
					{
						return (-1);
					}
					if (FlashNVM (plc))
					{
						return (-1);
					}
				}
				continue;
			}
			if (indicate->MACTION == 0x01)
			{
				if (HostActionResponse (plc))
				{
					return (-1);
				}
				close (plc->NVM.file);
				if (ReadFirmware1 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (indicate->MACTION == 0x02)
			{
				if (HostActionResponse (plc))
				{
					return (-1);
				}
				close (plc->PIB.file);
				if (ReadParameters1 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (indicate->MACTION == 0x03)
			{
				if (HostActionResponse (plc))
				{
					return (-1);
				}
				close (plc->NVM.file);
				if (ReadFirmware1 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				close (plc->PIB.file);
				if (ReadParameters1 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (indicate->MACTION == 0x04)
			{

#if 0

/*
 *	Due to an omission in the INT6300 BootLoader, responding to this VS_HOST_ACTION
 *      indication will suppress subsequent VS_HOST_ACTION messages and the device will
 *     	not request firmware and parameters; this may be corrected on the INT6400;
 */

				if (HostActionResponse (plc))
				{
					return (-1);
				}

#endif

				if (WriteCFG (plc))
				{
					return (-1);
				}

/*
 *	At this point, one could download firmware and parameters without waiting for
 *	further  requests from the device; however, we elect to wait for them since it
 *	is 'good form'; a device should send code 0x00 within 10 seconds of this one;
 */

				continue;
			}
			if (indicate->MACTION == 0x05)
			{
				if (HostActionResponse (plc))
				{
					return (-1);
				}
				close (plc->NVM.file);
				if ((plc->NVM.file = open (plc->NVM.name = NVM, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				close (plc->PIB.file);
				if ((plc->PIB.file = open (plc->PIB.name = PIB, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			error (0, ENOSYS, "Host Action 0x%0X", indicate->MACTION);
		}
	}
	return (0);
}
コード例 #3
0
ファイル: plchostd2.c プロジェクト: GSLyons/open-plc-utils
signed function (struct plc * plc, char const * socket)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

	static char const * actions [] =
	{
		"start device",
		"store firmware",
		"store parameters",
		"update host",
		"config memory",
		"restore defaults",
		"unknown"
	};

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	signed fd = opensocket (socket);
	char firmware [PLC_VERSION_STRING];
	char const * FactoryNVM = plc->NVM.name;
	char const * FactoryPIB = plc->PIB.name;
	signed action;
	signed status;
	write (fd, MESSAGE, strlen (MESSAGE));
	while (!done)
	{
		status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
		if (status < 0)
		{
			break;
		}
		if (status < 1)
		{
			continue;
		}
		action = indicate->MACTION;
		if (action < SIZEOF (actions))
		{
			fprintf(stderr, "plchostd2: action = %s\n", actions[action]);
		}
		else
		{
			fprintf(stderr, "plchostd2: action = %d\n", action);
		}
		memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
		if (HostActionResponse (plc))
		{
			return (-1);
		}
		if (action == 0x00)
		{
			if (BootDevice2 (plc))
			{
				return (-1);
			}
			if (WaitForStart (plc, firmware, sizeof (firmware)))
			{
				return (-1);
			}
			if (_anyset (plc->flags, PLC_FLASH_DEVICE))
			{
				FlashDevice2 (plc, (PLC_COMMIT_FORCE | PLC_COMMIT_NORESET | PLC_COMMIT_FACTPIB));
			}
			continue;
		}
		if (action == 0x01)
		{
			close (plc->NVM.file);
			if (ReadFirmware2 (plc))
			{
				return (-1);
			}
			if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			continue;
		}
		if (action == 0x02)
		{
			close (plc->PIB.file);
			if (ReadParameters2 (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x03)
		{
			close (plc->PIB.file);
			if (ReadParameters2 (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			close (plc->NVM.file);
			if (ReadFirmware2 (plc))
			{
				return (-1);
			}
			if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x04)
		{
			if (InitDevice2 (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x05)
		{
			close (plc->NVM.file);
			if ((plc->NVM.file = open (plc->NVM.name = FactoryNVM, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			close (plc->PIB.file);
			if ((plc->PIB.file = open (plc->PIB.name = FactoryPIB, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x06)
		{
			close (plc->PIB.file);
			if (ReadParameters2 (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			continue;
		}
		error (0, ENOSYS, "Host Action 0x%02X", action);
	}
	close (fd);
	return (0);
}
コード例 #4
0
ファイル: amphost.c プロジェクト: I2SE/open-plc-utils
signed function (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);
	static char const * actions [] =
	{
		"start device",
		"store firmware",
		"store parameters",
		"update host",
		"config memory",
		"restore defaults",
		"unknown"
	};

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	char const * FactoryNVM = plc->NVM.name;
	char const * FactoryPIB = plc->PIB.name;
	signed status;
	signed action;
	Request (plc, "Waiting for Host Action");
	while (1)
	{
		status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
		if (status < 0)
		{
			break;
		}
		if (status > 0)
		{
			printf ("\n");
			if (indicate->MACTION < SIZEOF (actions))
			{
				Confirm (plc, "Host Action Request is (%d) %s.", indicate->MACTION, actions [indicate->MACTION]);
			}
			else
			{
				error (0, ENOTSUP, "Host Action 0x%0X", indicate->MACTION);
				continue;
			}
			action = indicate->MACTION;
			memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
			if (HostActionResponse (plc))
			{
				return (-1);
			}
			if (action == 0x00)
			{
				if (BootDevice1 (plc))
				{
					return (-1);
				}
				if (_anyset (plc->flags, PLC_FLASH_DEVICE))
				{
					FlashDevice1 (plc);
				}
				continue;
			}
			if (action == 0x01)
			{
				close (plc->NVM.file);
				if (ReadFirmware1 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x02)
			{
				close (plc->PIB.file);
				if (ReadParameters1 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x03)
			{
				close (plc->PIB.file);
				if (ReadParameters1 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				close (plc->NVM.file);
				if (ReadFirmware1 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x04)
			{
				if (InitDevice1 (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x05)
			{
				close (plc->PIB.file);
				if ((plc->PIB.file = open (plc->PIB.name = FactoryPIB, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				close (plc->NVM.file);
				if ((plc->NVM.file = open (plc->NVM.name = FactoryNVM, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x06)
			{
				close (plc->PIB.file);
				if (ReadParameters1 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				continue;
			}
			error (0, ENOSYS, "Host Action 0x%02X", action);
		}
	}
	return (0);
}
コード例 #5
0
ファイル: plchostd.c プロジェクト: harrynoob/open-plc-utils
signed function (struct plc * plc, char const * socket)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	byte buffer [3000];
	struct plctopology * plctopology = (struct plctopology *)(buffer);
	signed fd = opensocket (socket);
	char const * FactoryNVM = plc->NVM.name;
	char const * FactoryPIB = plc->PIB.name;
	signed action;
	signed status;
	memset (buffer, 0, sizeof (buffer));
	write (fd, MESSAGE, strlen (MESSAGE));
	while (!done)
	{
		status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
		if (status < 0)
		{
			break;
		}
		if (status < 1)
		{
			PLCTopology (channel, message, plctopology);
			PLCTopologyPrint (plctopology);
			continue;
		}
		action = indicate->MACTION;
		memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
		if (HostActionResponse (plc))
		{
			return (-1);
		}
		if (action == 0x00)
		{
			if (BootDevice2 (plc))
			{
				return (-1);
			}
			if (_anyset (plc->flags, PLC_FLASH_DEVICE))
			{
				FlashDevice2 (plc);
			}
			continue;
		}
		if (action == 0x01)
		{
			close (plc->NVM.file);
			if (ReadFirmware1 (plc))
			{
				return (-1);
			}
			if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x02)
		{
			close (plc->PIB.file);
			if (ReadParameters (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x03)
		{
			close (plc->PIB.file);
			if (ReadParameters (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			close (plc->NVM.file);
			if (ReadFirmware1 (plc))
			{
				return (-1);
			}
			if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x04)
		{
			if (InitDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x05)
		{
			close (plc->NVM.file);
			if ((plc->NVM.file = open (plc->NVM.name = FactoryNVM, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->NVM.name);
			}
			close (plc->PIB.file);
			if ((plc->PIB.file = open (plc->PIB.name = FactoryPIB, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			if (ResetDevice (plc))
			{
				return (-1);
			}
			continue;
		}
		if (action == 0x06)
		{
			close (plc->PIB.file);
			if (ReadParameters (plc))
			{
				return (-1);
			}
			if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
			{
				error (1, errno, "%s", plc->PIB.name);
			}
			continue;
		}
		error (0, ENOSYS, "Host Action 0x%02X", action);
	}
	close (fd);
	return (0);
}
コード例 #6
0
ファイル: plctool.c プロジェクト: tcdog001/apv5sdk-v15
static void manager (struct plc * plc, signed count, signed pause) 

{
	while (count--) 
	{
		if (_anyset (plc->flags, PLC_VERSION)) 
		{
			VersionInfo2 (plc);
		}
		if (_anyset (plc->flags, PLC_ATTRIBUTES)) 
		{
			Attributes2 (plc);
		}
		if (_anyset (plc->flags, PLC_WATCHDOG_REPORT)) 
		{
			WatchdogReport (plc);
		}
		if (_anyset (plc->flags, PLC_NVRAM_INFO)) 
		{
			NVRAMInfo (plc);
		}
		if (_anyset (plc->flags, PLC_READ_IDENTITY)) 
		{
			Identity2 (plc);
		}
		if (_anyset (plc->flags, PLC_REMOTEHOSTS)) 
		{
			RemoteHosts (plc);
		}
		if (_anyset (plc->flags, PLC_NETWORK)) 
		{
			NetInfo2 (plc);
		}
		if (_anyset (plc->flags, PLC_READ_PIB)) 
		{
			ModuleRead (plc, &plc->pib, PLC_MOD_OP_READ_MEMORY, PLC_MODULEID_PARAMETERS, 0);
		}
		if (_anyset (plc->flags, PLC_READ_MAC)) 
		{
			ModuleRead (plc, &plc->nvm, PLC_MOD_OP_READ_MEMORY, PLC_MODULEID_FIRMWARE, 0);
		}
		if (_anyset (plc->flags, PLC_HOST_ACTION)) 
		{
			HostActionResponse (plc);
		}
		if (_anyset (plc->flags, PLC_PUSH_BUTTON)) 
		{
			PushButton (plc);
		}
		if (_anyset (plc->flags, PLC_FACTORY_DEFAULTS)) 
		{
			FactoryDefaults (plc);
		}
		if (_anyset (plc->flags, (PLC_SETLOCALKEY | PLC_SETREMOTEKEY))) 
		{
			SetNMK (plc);
		}
		if (_anyset (plc->flags, PLC_FLASH_DEVICE)) 
		{
			FlashDevice2 (plc);
		}
		if (_anyset (plc->flags, PLC_RESET_DEVICE)) 
		{
			ResetDevice (plc);
		}
		sleep (pause);
	}
	return;
}
コード例 #7
0
signed function (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	char firmware [PLC_VERSION_STRING];
	char const * FactoryNVM = plc->NVM.name;
	char const * FactoryPIB = plc->PIB.name;
	signed status;
	while (true)
	{
		status = ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_IND));
		if (status < 0)
		{
			break;
		}
		if (status > 0)
		{
			signed action = indicate->MACTION;
			memcpy (channel->peer, indicate->ethernet.OSA, sizeof (channel->peer));
			if (HostActionResponse (plc))
			{
				return (-1);
			}
			if (action == 0x00)
			{
				if (BootDevice2 (plc))
				{
					return (-1);
				}
				if (WaitForStart (plc, firmware, sizeof (firmware)))
				{
					return (-1);
				}
				if (_anyset (plc->flags, PLC_FLASH_DEVICE))
				{
					FlashDevice2 (plc, (PLC_COMMIT_FORCE | PLC_COMMIT_NORESET | PLC_COMMIT_FACTPIB));
				}
				continue;
			}
			if (action == 0x01)
			{
				close (plc->NVM.file);
				if (ReadFirmware2 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				continue;
			}
			if (action == 0x02)
			{
				close (plc->PIB.file);
				if (ReadParameters2 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x03)
			{
				close (plc->PIB.file);
				if (ReadParameters2 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				close (plc->NVM.file);
				if (ReadFirmware2 (plc))
				{
					return (-1);
				}
				if ((plc->NVM.file = open (plc->NVM.name = plc->nvm.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x04)
			{
				if (InitDevice2 (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x05)
			{
				close (plc->NVM.file);
				if ((plc->NVM.file = open (plc->NVM.name = FactoryNVM, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->NVM.name);
				}
				close (plc->PIB.file);
				if ((plc->PIB.file = open (plc->PIB.name = FactoryPIB, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				if (ResetDevice (plc))
				{
					return (-1);
				}
				continue;
			}
			if (action == 0x06)
			{
				close (plc->PIB.file);
				if (ReadParameters2 (plc))
				{
					return (-1);
				}
				if ((plc->PIB.file = open (plc->PIB.name = plc->pib.name, O_BINARY|O_RDONLY)) == -1)
				{
					error (1, errno, "%s", plc->PIB.name);
				}
				continue;
			}
			error (0, ENOSYS, "Host Action 0x%02X", action);
		}
	}
	return (0);
}