void I2C_EE_Init()
{
/* GPIO Periph clock enable */
RCC_AHB1PeriphClockCmd(I2C_EE_GPIO_CLK, ENABLE);
/* GPIO configuration */
I2C_GPIO_Configuration();
}
/**************************************************************/
//程 序 名： main()
//开 发 者： MingH
//入口参数： 无
//功能说明： 主函数
//**************************************************************/
int main(void)
{
unsigned char err_code;
RCC_Config(); // 时钟初始化配置
Beep_Init(); // 蜂鸣器初始化配置
Touch_Init();
Pcie_Gpio_Init();
Tim3_Init();
RGB_Init(); //RGB 初始化
RCC_GetClocksFreq(&RCC_ClockFreq);
SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
USB2Serial_Init(); // 串口初始化配置
Pwm_Init();
Adc_Init();
I2C_GPIO_Configuration();
err_code = LIS3DH_Init();
if (NO_ERROR == err_code)
{
printf("\r\nLIS3DH Init is succeed! \r\n");
}
else
{
printf("\r\nLIS3DH Init is failed! \r\n");
}
RTC_Init(); // RTC 初始化配置
if(SD_Init() == SD_OK) {
printf ("\r\n发现SD卡!\r\n");
}
else {
printf("\r\n没有发现 SD 卡设备! \r\n");
}
printf("\r\n\r\n");
save_sd_detect = SD_Detect(); //初始化SD卡插入状态
SysTick_Delay_ms(500);
TIM_Cmd(TIM1, DISABLE);
TIM_CtrlPWMOutputs(TIM1, DISABLE);
while (1)
{
if(read_sd_detect_flag){
if (save_sd_detect != SD_Detect()){
/* 蜂鸣器响 */
TIM_Cmd(TIM1, ENABLE);
TIM_CtrlPWMOutputs(TIM1, ENABLE);
sd_detect_change = 1; //SD卡插入状态有变
buzzer_delay = 0;
if (SD_Detect() != SD_NOT_PRESENT){
if(SD_Init() == SD_OK) {
printf ("\r\n发现SD卡!\r\n");
}
else {
printf("\r\n没有发现 SD 卡设备! \r\n");
}
printf("\r\n\r\n");
}
}
save_sd_detect = SD_Detect();
read_sd_detect_flag = 0;
}
Time_Show();
Test_Pcie_Gpio();
Touch_Key_Proc();
if (read_lis3dh_flag){
Collect_Data(ACCdata);
for (i=0; i<3; i++){
if (oldACCdata[i] < ACCdata[i]){
ACCdiff[i] = ACCdata[i] - oldACCdata[i];
}
else{
ACCdiff[i] = oldACCdata[i] - ACCdata[i];
}
}
RGB_Control(ACCdiff[0]<<1, ACCdiff[1]<<1, ACCdiff[2]<<1);
for (i=0; i<3; i++){
oldACCdata[i] = ACCdata[i];
}
read_lis3dh_flag = 0;
}
if (one_second_flag){
printf("X=%d, Y=%d, Z=%d\r\n\r\n", ACCdata[1], ACCdata[0], ACCdata[2]);
Adc_Proc();
one_second_flag = 0;
}
}
}
