void CI2C1_Interrupt(LDD_RTOS_TISRParameter _isrParameter)
{
/* {MQXLite RTOS Adapter} ISR parameter is passed as parameter from RTOS interrupt dispatcher */
CI2C1_TDeviceDataPtr DeviceDataPrv = (CI2C1_TDeviceDataPtr)_isrParameter;
register uint8_t Status; /* Temporary variable for status register */
Status = I2C_PDD_ReadStatusReg(I2C0_BASE_PTR); /* Safe status register */
I2C_PDD_ClearInterruptFlags(I2C0_BASE_PTR, (Status)); /* Clear interrupt flag */
if (I2C_PDD_GetMasterMode(I2C0_BASE_PTR) == I2C_PDD_MASTER_MODE) { /* Is device in master mode? */
if (I2C_PDD_GetTransmitMode(I2C0_BASE_PTR) == I2C_PDD_TX_DIRECTION) { /* Is device in Tx mode? */
if ((Status & I2C_PDD_RX_ACKNOWLEDGE) != 0x00U){ /* NACK received? */
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* Switch device to slave mode (stop signal sent) */
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
DeviceDataPrv->OutLenM = 0x00U; /* No character for sending */
DeviceDataPrv->InpLenM = 0x00U; /* No character for reception */
DeviceDataPrv->SerFlag &= (uint8_t)~(MASTER_IN_PROGRES); /* No character for sending or reception */
} else {
if (DeviceDataPrv->OutLenM != 0x00U) { /* Is any char. for transmitting? */
DeviceDataPrv->OutLenM--; /* Decrease number of chars for the transmit */
I2C_PDD_WriteDataReg(I2C0_BASE_PTR, *(DeviceDataPrv->OutPtrM)++); /* Send character */
} else {
if (DeviceDataPrv->InpLenM != 0x00U) { /* Is any char. for reception? */
if (DeviceDataPrv->InpLenM == 0x01U) { /* If only one char to receive */
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_DISABLE); /* then transmit ACK disable */
} else {
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_ENABLE); /* else transmit ACK enable */
}
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
(void)I2C_PDD_ReadDataReg(I2C0_BASE_PTR); /* Dummy read character */
} else {
DeviceDataPrv->SerFlag &= (uint8_t)~(MASTER_IN_PROGRES); /* Clear flag "busy" */
if (DeviceDataPrv->SendStop == LDD_I2C_SEND_STOP) {
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* Switch device to slave mode (stop signal sent) */
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
}
CI2C1_OnMasterBlockSent(DeviceDataPrv->UserData); /* Invoke OnMasterBlockSent event */
}
}
}
} else {
DeviceDataPrv->InpLenM--; /* Decrease number of chars for the receive */
if (DeviceDataPrv->InpLenM != 0x00U) { /* Is any char. for reception? */
if (DeviceDataPrv->InpLenM == 0x01U) {
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_DISABLE); /* Transmit NACK */
}
} else {
DeviceDataPrv->SerFlag &= (uint8_t)~(MASTER_IN_PROGRES); /* Clear flag "busy" */
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* If no, switch device to slave mode (stop signal sent) */
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_ENABLE); /* Transmit ACK */
}
*(DeviceDataPrv->InpPtrM)++ = I2C_PDD_ReadDataReg(I2C0_BASE_PTR); /* Receive character */
if (DeviceDataPrv->InpLenM == 0x00U) { /* Is any char. for reception? */
CI2C1_OnMasterBlockReceived(DeviceDataPrv->UserData); /* Invoke OnMasterBlockReceived event */
}
}
} else {
if ((Status & I2C_PDD_ARBIT_LOST) != 0x00U) { /* Arbitration lost? */
DeviceDataPrv->OutLenM = 0x00U; /* Any character is not for sent */
DeviceDataPrv->InpLenM = 0x00U; /* Any character is not for reception */
DeviceDataPrv->SendStop = LDD_I2C_SEND_STOP; /* Set variable for sending stop condition (for master mode) */
DeviceDataPrv->SerFlag &= (uint8_t)~(MASTER_IN_PROGRES); /* Any character is not for sent or reception*/
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
}
}
}
void i2c_interrupt_process (i2c_buf_t *buf) {
/*
* this is the i2c interrupt handler, will be called from a wrapper function,
* processor failexpert recommended using register for status, not sure if
* necessary. assuming device is always in master mode.
*/
uint8_t status = I2C_S_REG(I2C0_BASE_PTR);
uint8_t errormask = 0x00;
// clear interrupt flag
I2C_S_REG(I2C0_BASE_PTR) = (uint_8)(status | ((I2C_S_IICIF_MASK & I2C_S_ARBL_MASK) & I2C_S_REG(I2C0_BASE_PTR)));
if (I2C_PDD_GetMasterMode(I2C0_BASE_PTR) == I2C_PDD_MASTER_MODE) { /* Is device in master mode? */
if (I2C_PDD_GetTransmitMode(I2C0_BASE_PTR) == I2C_PDD_TX_DIRECTION) { /* Is device in Tx mode? */
if ((status & I2C_PDD_RX_ACKNOWLEDGE) != 0x00U){ /* NACK received? */
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* Switch device to slave mode (stop signal sent) */
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
buf->tx_req = 0x00U; /* No character for sending */
buf->rx_req = 0x00U; /* No character for reception */
buf->flags &= ~(MASTER_IN_PROGRES); /* No character for sending or reception */
buf->flags |= (ADDR_COMPLETE | REP_ADDR_COMPLETE); /* Set the flag */
errormask |= LDD_I2C_MASTER_NACK; /* Set the Master Nack error mask */
}
else {
if ((buf->flags & ADDR_COMPLETE) != 0x00U) { /* If 10-bit addr has been completed */
if (buf->tx_req != 0x00U) { /* Is any char. for transmitting? */
buf->tx_req--; /* Decrease number of chars for the transmit */
I2C_PDD_WriteDataReg(I2C0_BASE_PTR, buf->tx_buf[buf->tx_idx++]); /* Send character */
}
else {
if (buf->rx_req != 0x00U) { /* Is any char. for reception? */
if ((buf->flags & REP_ADDR_COMPLETE) != 0x00U) { /* If repeated start and addr tx has been completed for 10-bit mode ?*/
if (buf->rx_req == 0x01U) { /* If only one char to receive */
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_DISABLE); /* then transmit ACK disable */
}
else {
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_ENABLE); /* else transmit ACK enable */
}
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
(void)I2C_PDD_ReadDataReg(I2C0_BASE_PTR); /* Dummy read character */
}
else { /* Repeated address has not been completed for 10-bit addressing mode */
I2C_PDD_RepeatStart(I2C0_BASE_PTR); /* Repeat start cycle generated */
I2C_PDD_WriteDataReg(I2C0_BASE_PTR, (uint8_t)(buf->slave_addr_high | 0x01U)); /* Send slave address high byte*/
buf->flags |= REP_ADDR_COMPLETE;
}
}
else {
buf->flags &= ~(MASTER_IN_PROGRES); /* Clear flag "busy" */
if (buf->sendstop == TRUE) {
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* Switch device to slave mode (stop signal sent) */
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
}
}
}
} else {
I2C_PDD_WriteDataReg(I2C0_BASE_PTR, buf->slave_addr_low); /* Send second part of the 10-bit addres */
buf->flags |= (ADDR_COMPLETE); /* Address complete */
}
}
}
else {
buf->rx_req--; /* Decrease number of chars for the receive */
if (buf->rx_req != 0x00U) { /* Is any char. for reception? */
if (buf->rx_req == 0x01U) {
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_DISABLE); /* Transmit NACK */
}
} else {
buf->flags &= ~(MASTER_IN_PROGRES); /* Clear flag "busy" */
I2C_PDD_SetMasterMode(I2C0_BASE_PTR, I2C_PDD_SLAVE_MODE); /* If no, switch device to slave mode (stop signal sent) */
I2C_PDD_EnableTransmitAcknowledge(I2C0_BASE_PTR, PDD_ENABLE); /* Transmit ACK */
}
buf->rx_buf[buf->rx_idx++] = I2C_PDD_ReadDataReg(I2C0_BASE_PTR); /* Receive character */
}
} else {
if ((status & I2C_PDD_ARBIT_LOST) != 0x00U) { /* Arbitration lost? */
buf->tx_req = 0x00U; /* Any character is not for sent */
buf->rx_req = 0x00U; /* Any character is not for reception */
buf->sendstop = TRUE; /* Set variable for sending stop condition (for master mode) */
buf->flags &= ~(MASTER_IN_PROGRES); /* Any character is not for sent or reception*/
I2C_PDD_SetTransmitMode(I2C0_BASE_PTR, I2C_PDD_RX_DIRECTION); /* Switch to Rx mode */
errormask |= LDD_I2C_ARBIT_LOST; /* Set the ArbitLost error mask */
}
}
if (errormask != 0x00) { /* Is any error mask set? */
buf->errors |= errormask; /* Update list of error mask value */
// maybe do something here to handle error?
}
}
