/**
* This FSM checks for new incoming packets, and routes it to appropriate
* stack components. It also performs timed operations.
*
* This function must be called periodically called
* to make sure that timely response.
*
* @preCondition StackInit() is already called.
*
* side affect: Stack FSM is executed.
*/
void StackTask(void)
{
static NODE_INFO remoteNode;
static WORD dataCount;
#if defined(STACK_USE_ICMP)
static BYTE data[MAX_ICMP_DATA_LEN];
static WORD ICMPId;
static WORD ICMPSeq;
#endif
IP_ADDR destIP; //Is filled with the Destination IP address contained in the IP header
union
{
BYTE MACFrameType;
BYTE IPFrameType;
ICMP_CODE ICMPCode;
} type;
BOOL lbContinue;
lbContinue = TRUE;
while( lbContinue )
{
lbContinue = FALSE;
switch(smStack)
{
case SM_STACK_IDLE:
case SM_STACK_MAC:
//Check if the MAC RX Buffer has any data, and if it does, read the header.
//Get the next header from the NIC. The node who sent it's address will be copied to
//'remoteNode.MACAddr'.
if ( !MACRxbufGetHdr(&remoteNode.MACAddr, &type.MACFrameType) )
{
//Header was NOT read if MACRxbufGetHdr returned FALSE
#if defined(STACK_USE_DHCP)
//If DHCP is enabled AND MAC is not linked yet, set our IP to 0
if (STACK_IS_DHCP_ENABLED)
{
if ( !MACIsLinked() )
{
#if (DEBUG_STACKTSK >= LOG_INFO)
debugPutMsg(1); //@mxd:1:DHCP Enabled but MAC not linked yet - set IP to 0.0.0.0
#endif
//IP address must be 0.0.0.0 before DHCP has obtained a valid IP address
MY_IP_BYTE1 = 0;
MY_IP_BYTE2 = 0;
MY_IP_BYTE3 = 0;
MY_IP_BYTE4 = 0;
stackFlags.bits.bInConfigMode = TRUE;
DHCPReset();
}
}
#endif
break;
}
lbContinue = TRUE;
if ( type.MACFrameType == MAC_IP ) {
smStack = SM_STACK_IP;
#if (DEBUG_STACKTSK >= LOG_DEBUG)
debugPutMsg(2); //@mxd:2:Reading MAC IP header
#endif
}
else if ( type.MACFrameType == MAC_ARP ) {
smStack = SM_STACK_ARP;
#if (DEBUG_STACKTSK >= LOG_DEBUG)
debugPutMsg(3); //@mxd:3:Reading MAC ARP header
#endif
}
else {
MACRxbufDiscard();
#if (DEBUG_STACKTSK >= LOG_WARN)
debugPutMsg(4); //@mxd:4:Unknown MAC header read, MAC Frame Type = 0x%x
debugPutByteHex(type.MACFrameType);
#endif
}
break;
case SM_STACK_ARP:
lbContinue = FALSE;
if ( ARPProcess() )
smStack = SM_STACK_IDLE;
break;
case SM_STACK_IP:
if ( IPGetHeader(&destIP, /* Get Destination IP Address as received in IP header */
&remoteNode,
&type.IPFrameType,
&dataCount) )
{
lbContinue = TRUE;
if ( type.IPFrameType == IP_PROT_ICMP )
{
smStack = SM_STACK_ICMP;
#if defined(STACK_USE_IP_GLEANING)
if ( stackFlags.bits.bInConfigMode )
{
/*
* Accoriding to "IP Gleaning" procedure, when we receive an ICMP packet
* with a valid IP address while we are still in configuration mode,
* accept that address as ours and conclude configuration mode.
*/
if ( destIP.Val != 0xffffffff )
{
stackFlags.bits.bInConfigMode = FALSE;
MY_IP_BYTE1 = destIP.v[0];
MY_IP_BYTE2 = destIP.v[1];
MY_IP_BYTE3 = destIP.v[2];
MY_IP_BYTE4 = destIP.v[3];
#if defined(STACK_USE_DHCP)
/*
* If DHCP and IP gleaning is enabled at the
* same time, we must ensuer that once we have
* IP address through IP gleaning, we abort
* any pending DHCP requests and do not renew
* any new DHCP configuration.
*/
DHCPAbort();
#endif
}
}
#endif
}
#if defined(STACK_USE_TCP)
else if ( type.IPFrameType == IP_PROT_TCP )
smStack = SM_STACK_TCP;
#endif
#if defined(STACK_USE_UDP)
else if ( type.IPFrameType == IP_PROT_UDP )
smStack = SM_STACK_UDP;
#endif
else
{
lbContinue = FALSE;
MACRxbufDiscard();
smStack = SM_STACK_IDLE;
}
}
else
{
MACRxbufDiscard();
smStack = SM_STACK_IDLE;
}
break;
#if defined(STACK_USE_UDP)
case SM_STACK_UDP:
//tempLocalIP.v[0] = MY_IP_BYTE1;
//tempLocalIP.v[1] = MY_IP_BYTE2;
//tempLocalIP.v[2] = MY_IP_BYTE3;
//tempLocalIP.v[3] = MY_IP_BYTE4;
if ( UDPProcess(&remoteNode, &destIP, dataCount) )
smStack = SM_STACK_IDLE;
lbContinue = FALSE;
break;
#endif
#if defined(STACK_USE_TCP)
case SM_STACK_TCP:
//tempLocalIP.v[0] = MY_IP_BYTE1;
//tempLocalIP.v[1] = MY_IP_BYTE2;
//tempLocalIP.v[2] = MY_IP_BYTE3;
//tempLocalIP.v[3] = MY_IP_BYTE4;
//Will return TRUE if TCPProcess finished it's task, else FALSE
if ( TCPProcess(&remoteNode, &destIP, dataCount) )
smStack = SM_STACK_IDLE;
lbContinue = FALSE;
break;
#endif
case SM_STACK_ICMP:
smStack = SM_STACK_IDLE;
#if defined(STACK_USE_ICMP)
if ( dataCount <= (MAX_ICMP_DATA_LEN+9) )
{
if ( ICMPGet(&type.ICMPCode,
data,
(BYTE*)&dataCount,
&ICMPId,
&ICMPSeq) )
{
if ( type.ICMPCode == ICMP_ECHO_REQUEST )
{
lbContinue = TRUE;
smStack = SM_STACK_ICMP_REPLY;
}
else
{
smStack = SM_STACK_IDLE;
}
}
else
{
smStack = SM_STACK_IDLE;
}
}
#endif
MACRxbufDiscard();
break;
#if defined(STACK_USE_ICMP)
case SM_STACK_ICMP_REPLY:
if ( ICMPIsTxReady() )
{
ICMPPut(&remoteNode,
ICMP_ECHO_REPLY,
data,
(BYTE)dataCount,
ICMPId,
ICMPSeq);
smStack = SM_STACK_IDLE;
}
break;
#endif
}
}
#if defined(STACK_USE_TCP)
// Perform timed TCP FSM.
TCPTick();
#endif
#if defined(STACK_USE_DHCP)
/*
* DHCP must be called all the time even after IP configuration is discovered.
* DHCP has to account lease expiration time and renew the configuration time.
*/
DHCPTask();
if ( DHCPIsBound() )
stackFlags.bits.bInConfigMode = FALSE;
#endif
//Perform routine MAC tasks
MACTask();
}
/**
* This FSM checks for new incoming packets, and routes it to appropriate
* stack components. It also performs timed operations.
*
* This function must be called periodically called
* to make sure that timely response.
*
* @preCondition StackInit() is already called.
*
* side affect: Stack FSM is executed.
*/
void StackTask(void)
{
static WORD dataCount;
#if defined(STACK_USE_ICMP)
static BYTE data[MAX_ICMP_DATA_LEN];
static WORD ICMPId;
static WORD ICMPSeq;
#endif
IP_ADDR destIP; //Is filled with the Destination IP address contained in the IP header
union
{
BYTE MACFrameType;
BYTE IPFrameType;
ICMP_CODE ICMPCode;
} type;
BOOL lbContinue;
do
{
lbContinue = FALSE;
switch(smStack)
{
case SM_STACK_IDLE:
case SM_STACK_MAC:
//debugPutGenRomStr(2, (ROM char*)"1"); //@mxd:2:%s
//Check if the MAC RX Buffer has any data, and if it does, read the header.
//Get the next header from the NIC. The node who sent it's address will be copied to
//'remoteNode.MACAddr'.
//Header was NOT read if MACGetHeader returned FALSE
if ( !MACGetHeader(&remoteNode.MACAddr, &type.MACFrameType) )
{
//debugPutGenRomStr(2, (ROM char*)"2"); //@mxd:2:%s
//MODIFIED DHCP BEGIN
// ADDED
#if defined(STACK_USE_DHCP)
// Normally, an application would not include DHCP module
// if it is not enabled. But in case some one wants to disable
// DHCP module at run-time, remember to not clear our IP
// address if link is removed.
if(STACK_IS_DHCP_ENABLED)
{
if(!MACIsLinked())
{
AppConfig.MyIPAddr.v[0] = MY_DEFAULT_IP_ADDR_BYTE1;
AppConfig.MyIPAddr.v[1] = MY_DEFAULT_IP_ADDR_BYTE2;
AppConfig.MyIPAddr.v[2] = MY_DEFAULT_IP_ADDR_BYTE3;
AppConfig.MyIPAddr.v[3] = MY_DEFAULT_IP_ADDR_BYTE4;
AppConfig.MyMask.v[0] = MY_DEFAULT_MASK_BYTE1;
AppConfig.MyMask.v[1] = MY_DEFAULT_MASK_BYTE2;
AppConfig.MyMask.v[2] = MY_DEFAULT_MASK_BYTE3;
AppConfig.MyMask.v[3] = MY_DEFAULT_MASK_BYTE4;
DHCPFlags.bits.bDHCPServerDetected = FALSE;
stackFlags.bits.bInConfigMode = TRUE;
DHCPReset();
}
// DHCP must be called all the time even after IP configuration is
// discovered.
// DHCP has to account lease expiration time and renew the configuration
// time.
DHCPTask();
if(DHCPIsBound())
stackFlags.bits.bInConfigMode = FALSE;
}
#endif
//MODIFIED DHCP END
//MODIFIED DHCP BEGIN
// Removed
/*
#if defined(STACK_USE_DHCP)
// Normally, an application would not include DHCP module
// if it is not enabled. But in case some one wants to disable
// DHCP module at run-time, remember to not clear our IP
// address if link is removed.
//Set our IP to 0.0.0.0 if all the following are TRUE:
// - DHCP is enabled
// - MAC is not linked yet (or cable is unplugged)
if (STACK_IS_DHCP_ENABLED)
{
if ( !MACIsLinked() )
{
//debugPutGenRomStr(2, (ROM char*)"3"); //@mxd:2:%s
#if (DEBUG_STACKTSK >= LOG_INFO)
//debugPutMsg(1); //@mxd:1:DHCP Enabled but MAC not linked yet - set IP to 0.0.0.0
#endif
//if (stackFlags.bits.bInConfigMode) {
//IP address must be 0.0.0.0 before DHCP has obtained a valid IP address
MY_IP_BYTE1 = 0;
MY_IP_BYTE2 = 0;
MY_IP_BYTE3 = 0;
MY_IP_BYTE4 = 0;
//}
stackFlags.bits.bInConfigMode = TRUE;
DHCPReset();
}
}
#endif
*/
//MODIFIED DHCP END
break; //case SM_STACK_IDLE: AND case SM_STACK_MAC:
}
//debugPutGenRomStr(2, (ROM char*)"4"); //@mxd:2:%s
lbContinue = TRUE;
if ( type.MACFrameType == MAC_IP ) {
smStack = SM_STACK_IP;
#if (DEBUG_STACKTSK >= LOG_DEBUG)
debugPutMsg(2); //@mxd:2:Reading MAC IP header
#endif
}
else if ( type.MACFrameType == MAC_ARP ) {
smStack = SM_STACK_ARP;
#if (DEBUG_STACKTSK >= LOG_DEBUG)
debugPutMsg(3); //@mxd:3:Reading MAC ARP header
#endif
}
else {
MACDiscardRx(); //Discard the contents of the current RX buffer
#if (DEBUG_STACKTSK >= LOG_WARN)
debugPutMsg(4); //@mxd:4:Unknown MAC header read, MAC Frame Type = 0x%x
debugPutByteHex(type.MACFrameType);
#endif
}
break; //case SM_STACK_IDLE: AND case SM_STACK_MAC:
case SM_STACK_ARP:
if ( ARPProcess() )
smStack = SM_STACK_IDLE;
//lbContinue = FALSE; //Removed in latest Microchip TCP/IP stack
break;
case SM_STACK_IP:
if ( IPGetHeader(&destIP, /* Get Destination IP Address as received in IP header */
&remoteNode,
&type.IPFrameType,
&dataCount) )
{
lbContinue = TRUE;
if ( type.IPFrameType == IP_PROT_ICMP )
{
smStack = SM_STACK_ICMP;
#if defined(STACK_USE_IP_GLEANING)
if(stackFlags.bits.bInConfigMode && STACK_IS_DHCP_ENABLED)
{
// Accoriding to "IP Gleaning" procedure,
// when we receive an ICMP packet with a valid
// IP address while we are still in configuration
// mode, accept that address as ours and conclude
// configuration mode.
if ( destIP.Val != 0xffffffff )
{
stackFlags.bits.bInConfigMode = FALSE;
MY_IP_BYTE1 = destIP.v[0];
MY_IP_BYTE2 = destIP.v[1];
MY_IP_BYTE3 = destIP.v[2];
MY_IP_BYTE4 = destIP.v[3];
myDHCPBindCount--;
}
}
#endif
}
#if defined(STACK_USE_TCP)
else if ( type.IPFrameType == IP_PROT_TCP )
smStack = SM_STACK_TCP;
#endif
#if defined(STACK_USE_UDP)
else if ( type.IPFrameType == IP_PROT_UDP )
smStack = SM_STACK_UDP;
#endif
else // Unknown/unsupported higher level protocol
{
lbContinue = FALSE;
MACDiscardRx(); //Discard the contents of the current RX buffer
smStack = SM_STACK_IDLE;
}
}
else // Improper IP header version or checksum
{
MACDiscardRx(); //Discard the contents of the current RX buffer
smStack = SM_STACK_IDLE;
}
break; //case SM_STACK_IP:
#if defined(STACK_USE_UDP)
case SM_STACK_UDP:
if ( UDPProcess(&remoteNode, &destIP, dataCount) )
smStack = SM_STACK_IDLE;
//lbContinue = FALSE; //Removed in latest Microchip TCP/IP stack
break; //case SM_STACK_UDP:
#endif
#if defined(STACK_USE_TCP)
case SM_STACK_TCP:
if ( TCPProcess(&remoteNode, &destIP, dataCount) ) //Will return TRUE if TCPProcess finished it's task, else FALSE
smStack = SM_STACK_IDLE;
//lbContinue = FALSE; //Removed in latest Microchip TCP/IP stack
break; //case SM_STACK_TCP:
#endif
case SM_STACK_ICMP:
smStack = SM_STACK_IDLE;
#if defined(STACK_USE_ICMP)
if ( dataCount <= (MAX_ICMP_DATA_LEN+9) )
{
if ( ICMPGet(&type.ICMPCode,
data,
(BYTE*)&dataCount,
&ICMPId,
&ICMPSeq) )
{
if ( type.ICMPCode == ICMP_ECHO_REQUEST )
{
lbContinue = TRUE;
smStack = SM_STACK_ICMP_REPLY;
}
}
}
#endif
MACDiscardRx(); //Discard the contents of the current RX buffer
break; //case SM_STACK_ICMP:
#if defined(STACK_USE_ICMP)
case SM_STACK_ICMP_REPLY:
if ( ICMPIsTxReady() )
{
ICMPPut(&remoteNode,
ICMP_ECHO_REPLY,
data,
(BYTE)dataCount,
ICMPId,
ICMPSeq);
smStack = SM_STACK_IDLE;
}
break; //case SM_STACK_ICMP_REPLY:
#endif
} //switch(smStack)
FAST_USER_PROCESS();
} while(lbContinue);
#if defined(STACK_USE_TCP)
// Perform timed TCP FSM.
TCPTick();
#endif
//MODIFIED DHCP BEGIN
// Removed this
//#if defined(STACK_USE_DHCP)
/*
* DHCP must be called all the time even after IP configuration is
* discovered.
* DHCP has to account lease expiration time and renew the configuration
* time.
*/
// DHCPTask();
// if(DHCPIsBound())
// stackFlags.bits.bInConfigMode = FALSE;
//#endif
//debugPutGenRomStr(2, (ROM char*)"MACTask"); //@mxd:2:%s
//Perform routine MAC tasks
MACTask();
}
/******************************************************************************
* Function: void StackTask(void)
* PreCondition: StackInit() is already called.
* Input: None
* Output: Stack FSM is executed.
* Side Effects: None
* Note: This FSM checks for new incoming packets,
* and routes it to appropriate stack components.
* It also performs timed operations.
* This function must be called periodically to
* ensure timely responses.
******************************************************************************/
void StackTask(void)
{
static WORD dataCount;
IP_ADDR tempLocalIP;
BOOL lbContinue;
#if defined(STACK_USE_ICMP)
static BYTE data[MAX_ICMP_DATA_LEN];
static WORD ICMPId, ICMPSeq;
#endif
union
{
BYTE MACFrameType;
BYTE IPFrameType;
ICMP_CODE ICMPCode;
} type;
do
{
lbContinue = FALSE;
switch(smStack)
{
case SM_STACK_IDLE:
case SM_STACK_MAC:
if ( !MACGetHeader(&remoteNode.MACAddr, &type.MACFrameType) )
{
#if defined(STACK_USE_DHCP)
// Normally, an application would not include DHCP module
// if it is not enabled. But in case some one wants to disable
// DHCP module at run-time, remember to not clear our IP
// address if link is removed.
if ( AppConfig.Flags.bIsDHCPEnabled )
{
if ( !MACIsLinked() )
{
AppConfig.MyIPAddr.Val = 0x00000000ul;
AppConfig.Flags.bInConfigMode = TRUE;
DHCPReset();
}
}
#endif
break;
}
lbContinue = TRUE;
if ( type.MACFrameType == MAC_IP )
smStack = SM_STACK_IP;
else if ( type.MACFrameType == MAC_ARP )
smStack = SM_STACK_ARP;
else
MACDiscardRx();
break;
case SM_STACK_ARP:
if ( ARPProcess() )
smStack = SM_STACK_IDLE;
break;
case SM_STACK_IP:
if ( IPGetHeader(&tempLocalIP,&remoteNode,&type.IPFrameType,&dataCount) )
{
lbContinue = TRUE;
if ( type.IPFrameType == IP_PROT_ICMP )
{
smStack = SM_STACK_ICMP;
#if defined(STACK_USE_IP_GLEANING)
if(AppConfig.Flags.bInConfigMode && AppConfig.Flags.bIsDHCPEnabled)
{
/*
* Accoriding to "IP Gleaning" procedure,
* when we receive an ICMP packet with a valid
* IP address while we are still in configuration
* mode, accept that address as ours and conclude
* configuration mode.
*/
if( tempLocalIP.Val != 0xffffffff )
{
AppConfig.Flags.bInConfigMode = FALSE;
AppConfig.MyIPAddr = tempLocalIP;
myDHCPBindCount--;
}
}
#endif
}
#if defined(STACK_USE_TCP)
else if ( type.IPFrameType == IP_PROT_TCP )
smStack = SM_STACK_TCP;
#endif
#if defined(STACK_USE_UDP)
else if ( type.IPFrameType == IP_PROT_UDP )
smStack = SM_STACK_UDP;
#endif
else // Unknown/unsupported higher level protocol
{
lbContinue = FALSE;
MACDiscardRx();
smStack = SM_STACK_IDLE;
}
}
else // Improper IP header version or checksum
{
MACDiscardRx();
smStack = SM_STACK_IDLE;
}
break;
#if defined(STACK_USE_UDP)
case SM_STACK_UDP:
if ( UDPProcess(&remoteNode, &tempLocalIP, dataCount) )
smStack = SM_STACK_IDLE;
break;
#endif
#if defined(STACK_USE_TCP)
case SM_STACK_TCP:
if ( TCPProcess(&remoteNode, &tempLocalIP, dataCount) )
smStack = SM_STACK_IDLE;
break;
#endif
case SM_STACK_ICMP:
smStack = SM_STACK_IDLE;
#if defined(STACK_USE_ICMP)
if ( dataCount <= (MAX_ICMP_DATA_LEN+8) )
{
if ( ICMPGet(&type.ICMPCode,data,(BYTE*)&dataCount,&ICMPId,&ICMPSeq) )
{
if ( type.ICMPCode == ICMP_ECHO_REQUEST )
{
lbContinue = TRUE;
smStack = SM_STACK_ICMP_REPLY;
}
}
}
#endif
MACDiscardRx();
break;
#if defined(STACK_USE_ICMP)
case SM_STACK_ICMP_REPLY:
if ( ICMPIsTxReady() )
{
ICMPPut(&remoteNode,ICMP_ECHO_REPLY,data,(BYTE)dataCount,ICMPId,ICMPSeq);
smStack = SM_STACK_IDLE;
}
break;
#endif
}
} while(lbContinue);
#if defined(STACK_USE_TCP)
TCPTick(); // Perform timed TCP FSM.
#endif
#if defined(STACK_USE_DHCP)
/*
* DHCP must be called all the time even after IP configuration is
* discovered.
* DHCP has to account lease expiration time and renew the configuration
* time.
*/
DHCPTask();
if(DHCPIsBound()) AppConfig.Flags.bInConfigMode = FALSE;
#endif
#if defined(STACK_USE_SNTP)
SNTPTask(); // Execute SNTP client FSM
#endif
#if defined(STACK_USE_NBNS)
NBNSTask(); // Execute NetBIOS name service task
#endif
}
