コード例 #1
0
void serialUARTInit(IO_t tx, IO_t rx, portMode_t mode, portOptions_t options, uint8_t af, uint8_t index)
{
    if (options & SERIAL_BIDIR) {
        ioConfig_t ioCfg = IO_CONFIG(GPIO_Mode_AF, GPIO_Speed_50MHz, 
            (options & SERIAL_INVERTED) ? GPIO_OType_PP : GPIO_OType_OD, 
            (options & SERIAL_INVERTED) ? GPIO_PuPd_DOWN : GPIO_PuPd_UP
        );

        IOInit(tx, OWNER_SERIAL, RESOURCE_UART_TXRX, index);
        IOConfigGPIOAF(tx, ioCfg, af);

        if (!(options & SERIAL_INVERTED))
            IOLo(tx);   // OpenDrain output should be inactive
    } else {
        ioConfig_t ioCfg = IO_CONFIG(GPIO_Mode_AF, GPIO_Speed_50MHz, GPIO_OType_PP, (options & SERIAL_INVERTED) ? GPIO_PuPd_DOWN : GPIO_PuPd_UP);
        if (mode & MODE_TX) {
            IOInit(tx, OWNER_SERIAL, RESOURCE_UART_TX, index);
            IOConfigGPIOAF(tx, ioCfg, af);
        }

        if (mode & MODE_RX) {
            IOInit(tx, OWNER_SERIAL, RESOURCE_UART_TX, index);
            IOConfigGPIOAF(rx, ioCfg, af);
        }
    }
}
コード例 #2
0
ファイル: compass_hmc5883l.c プロジェクト: 4712/cleanflight
static void hmc5883lConfigureDataReadyInterruptHandling(magDev_t* mag)
{
#ifdef USE_MAG_DATA_READY_SIGNAL
    if (mag->magIntExtiTag == IO_TAG_NONE) {
        return;
    }

    const IO_t magIntIO = IOGetByTag(mag->magIntExtiTag);

#ifdef ENSURE_MAG_DATA_READY_IS_HIGH
    uint8_t status = IORead(magIntIO);
    if (!status) {
        return;
    }
#endif

#if defined (STM32F7)
    IOInit(magIntIO, OWNER_COMPASS_EXTI, 0);
    EXTIHandlerInit(&mag->exti, hmc5883_extiHandler);
    EXTIConfig(magIntIO, &mag->exti, NVIC_PRIO_MPU_INT_EXTI, IO_CONFIG(GPIO_MODE_INPUT,0,GPIO_NOPULL));
    EXTIEnable(magIntIO, true);
#else
    IOInit(magIntIO, OWNER_COMPASS_EXTI, 0);
    IOConfigGPIO(magIntIO, IOCFG_IN_FLOATING);
    EXTIHandlerInit(&mag->exti, hmc5883_extiHandler);
    EXTIConfig(magIntIO, &mag->exti, NVIC_PRIO_MAG_INT_EXTI, EXTI_Trigger_Rising);
    EXTIEnable(magIntIO, true);
#endif
#else
    UNUSED(mag);
#endif
}
コード例 #3
0
ファイル: adc_stm32f30x.c プロジェクト: raul-ortega/iNav
void adcHardwareInit(drv_adc_config_t *init)
{
    UNUSED(init);
    int configuredAdcChannels = 0;

    for (int i = ADC_CHN_1; i < ADC_CHN_COUNT; i++) {
        if (!adcConfig[i].tag)
            continue;

        adcDevice_t * adc = &adcHardware[adcConfig[i].adcDevice];

        IOInit(IOGetByTag(adcConfig[i].tag), OWNER_ADC, RESOURCE_ADC_CH1 + (i - ADC_CHN_1), 0);
        IOConfigGPIO(IOGetByTag(adcConfig[i].tag), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));

        adcConfig[i].adcChannel = adcChannelByTag(adcConfig[i].tag);
        adcConfig[i].dmaIndex = adc->usedChannelCount++;
        adcConfig[i].sampleTime = ADC_SampleTime_601Cycles5;
        adcConfig[i].enabled = true;

        adc->enabled = true;
        configuredAdcChannels++;
    }

    if (configuredAdcChannels == 0)
        return;

    RCC_ADCCLKConfig(RCC_ADC12PLLCLK_Div256);  // 72 MHz divided by 256 = 281.25 kHz

    for (int i = 0; i < ADCDEV_COUNT; i++) {
        if (adcHardware[i].enabled) {
            adcInstanceInit(i);
        }
    }
}
コード例 #4
0
ファイル: mco.c プロジェクト: 4712betaflight/betaflight
void mcoInit(const mcoConfig_t *mcoConfig)
{
    // Only configure MCO2 with PLLI2SCLK as source for now.
    // Other MCO1 and other sources can easily be added.
    // For all F4 and F7 varianets, MCO1 is on PA8 and MCO2 is on PC9.

    if (mcoConfig->enabled[1]) {
        IO_t io = IOGetByTag(DEFIO_TAG_E(PC9));
        IOInit(io, OWNER_MCO, 2);
        HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_PLLI2SCLK, RCC_MCODIV_4);
        IOConfigGPIOAF(io, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH,  GPIO_NOPULL), GPIO_AF0_MCO);
    }
}
コード例 #5
0
ファイル: adc_stm32f30x.c プロジェクト: rotcehdnih/betaflight
void adcInit(const adcConfig_t *config)
{
    ADC_InitTypeDef ADC_InitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    uint8_t adcChannelCount = 0;

    memset(&adcOperatingConfig, 0, sizeof(adcOperatingConfig));

    if (config->vbat.enabled) {
        adcOperatingConfig[ADC_BATTERY].tag = config->vbat.ioTag;
    }

    if (config->rssi.enabled) {
        adcOperatingConfig[ADC_RSSI].tag = config->rssi.ioTag;  //RSSI_ADC_CHANNEL;
    }

    if (config->external1.enabled) {
        adcOperatingConfig[ADC_EXTERNAL1].tag = config->external1.ioTag; //EXTERNAL1_ADC_CHANNEL;
    }

    if (config->current.enabled) {
        adcOperatingConfig[ADC_CURRENT].tag = config->current.ioTag;  //CURRENT_METER_ADC_CHANNEL;
    }

    ADCDevice device = adcDeviceByInstance(ADC_INSTANCE);
    if (device == ADCINVALID)
        return;

#ifdef ADC24_DMA_REMAP
    SYSCFG_DMAChannelRemapConfig(SYSCFG_DMARemap_ADC2ADC4, ENABLE);
#endif
    adcDevice_t adc = adcHardware[device];

    bool adcActive = false;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcVerifyPin(adcOperatingConfig[i].tag, device)) {
            continue;
        }

        adcActive = true;
        IOInit(IOGetByTag(adcOperatingConfig[i].tag), OWNER_ADC_BATT + i, 0);
        IOConfigGPIO(IOGetByTag(adcOperatingConfig[i].tag), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcOperatingConfig[i].adcChannel = adcChannelByTag(adcOperatingConfig[i].tag);
        adcOperatingConfig[i].dmaIndex = adcChannelCount++;
        adcOperatingConfig[i].sampleTime = ADC_SampleTime_601Cycles5;
        adcOperatingConfig[i].enabled = true;
    }

    if (!adcActive) {
        return;
    }

    if ((device == ADCDEV_1) || (device == ADCDEV_2)) {
        // enable clock for ADC1+2
        RCC_ADCCLKConfig(RCC_ADC12PLLCLK_Div256);  // 72 MHz divided by 256 = 281.25 kHz
    } else {
        // enable clock for ADC3+4
        RCC_ADCCLKConfig(RCC_ADC34PLLCLK_Div256);  // 72 MHz divided by 256 = 281.25 kHz
    }

    RCC_ClockCmd(adc.rccADC, ENABLE);

    dmaInit(dmaGetIdentifier(adc.DMAy_Channelx), OWNER_ADC, 0);

    DMA_DeInit(adc.DMAy_Channelx);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&adc.ADCx->DR;
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
    DMA_InitStructure.DMA_BufferSize = adcChannelCount;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = adcChannelCount > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;

    DMA_Init(adc.DMAy_Channelx, &DMA_InitStructure);

    DMA_Cmd(adc.DMAy_Channelx, ENABLE);

    // calibrate

    ADC_VoltageRegulatorCmd(adc.ADCx, ENABLE);
    delay(10);
    ADC_SelectCalibrationMode(adc.ADCx, ADC_CalibrationMode_Single);
    ADC_StartCalibration(adc.ADCx);
    while (ADC_GetCalibrationStatus(adc.ADCx) != RESET);
    ADC_VoltageRegulatorCmd(adc.ADCx, DISABLE);

    ADC_CommonInitTypeDef ADC_CommonInitStructure;

    ADC_CommonStructInit(&ADC_CommonInitStructure);
    ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_CommonInitStructure.ADC_Clock = ADC_Clock_SynClkModeDiv4;
    ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_1;
    ADC_CommonInitStructure.ADC_DMAMode = ADC_DMAMode_Circular;
    ADC_CommonInitStructure.ADC_TwoSamplingDelay = 0;
    ADC_CommonInit(adc.ADCx, &ADC_CommonInitStructure);

    ADC_StructInit(&ADC_InitStructure);

    ADC_InitStructure.ADC_ContinuousConvMode    = ADC_ContinuousConvMode_Enable;
    ADC_InitStructure.ADC_Resolution            = ADC_Resolution_12b;
    ADC_InitStructure.ADC_ExternalTrigConvEvent = ADC_ExternalTrigConvEvent_0;
    ADC_InitStructure.ADC_ExternalTrigEventEdge = ADC_ExternalTrigEventEdge_None;
    ADC_InitStructure.ADC_DataAlign             = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_OverrunMode           = ADC_OverrunMode_Disable;
    ADC_InitStructure.ADC_AutoInjMode           = ADC_AutoInjec_Disable;
    ADC_InitStructure.ADC_NbrOfRegChannel       = adcChannelCount;

    ADC_Init(adc.ADCx, &ADC_InitStructure);

    uint8_t rank = 1;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(adc.ADCx, adcOperatingConfig[i].adcChannel, rank++, adcOperatingConfig[i].sampleTime);
    }

    ADC_Cmd(adc.ADCx, ENABLE);

    while (!ADC_GetFlagStatus(adc.ADCx, ADC_FLAG_RDY));

    ADC_DMAConfig(adc.ADCx, ADC_DMAMode_Circular);

    ADC_DMACmd(adc.ADCx, ENABLE);

    ADC_StartConversion(adc.ADCx);
}
コード例 #6
0
void adcInit(const adcConfig_t *config)
{

    uint8_t configuredAdcChannels = 0;

    memset(&adcOperatingConfig, 0, sizeof(adcOperatingConfig));

    if (config->vbat.enabled) {
        adcOperatingConfig[ADC_BATTERY].tag = config->vbat.ioTag;
    }

    if (config->rssi.enabled) {
        adcOperatingConfig[ADC_RSSI].tag = config->rssi.ioTag;  //RSSI_ADC_CHANNEL;
    }

    if (config->external1.enabled) {
        adcOperatingConfig[ADC_EXTERNAL1].tag = config->external1.ioTag; //EXTERNAL1_ADC_CHANNEL;
    }

    if (config->current.enabled) {
        adcOperatingConfig[ADC_CURRENT].tag = config->current.ioTag;  //CURRENT_METER_ADC_CHANNEL;
    }

    ADCDevice device = adcDeviceByInstance(ADC_INSTANCE);
    if (device == ADCINVALID)
        return;

    const adcDevice_t adc = adcHardware[device];

    bool adcActive = false;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].tag)
            continue;

        adcActive = true;
        IOInit(IOGetByTag(adcOperatingConfig[i].tag), OWNER_ADC_BATT + i, 0);
        IOConfigGPIO(IOGetByTag(adcOperatingConfig[i].tag), IO_CONFIG(GPIO_Mode_AIN, 0));
        adcOperatingConfig[i].adcChannel = adcChannelByTag(adcOperatingConfig[i].tag);
        adcOperatingConfig[i].dmaIndex = configuredAdcChannels++;
        adcOperatingConfig[i].sampleTime = ADC_SampleTime_239Cycles5;
        adcOperatingConfig[i].enabled = true;
    }

    if (!adcActive) {
        return;
    }

    RCC_ADCCLKConfig(RCC_PCLK2_Div8);  // 9MHz from 72MHz APB2 clock(HSE), 8MHz from 64MHz (HSI)
    RCC_ClockCmd(adc.rccADC, ENABLE);

    dmaInit(dmaGetIdentifier(adc.DMAy_Channelx), OWNER_ADC, 0);

    DMA_DeInit(adc.DMAy_Channelx);
    DMA_InitTypeDef DMA_InitStructure;
    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&adc.ADCx->DR;
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
    DMA_InitStructure.DMA_BufferSize = configuredAdcChannels;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = configuredAdcChannels > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
    DMA_Init(adc.DMAy_Channelx, &DMA_InitStructure);
    DMA_Cmd(adc.DMAy_Channelx, ENABLE);

    ADC_InitTypeDef ADC_InitStructure;
    ADC_StructInit(&ADC_InitStructure);
    ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_InitStructure.ADC_ScanConvMode = configuredAdcChannels > 1 ? ENABLE : DISABLE;
    ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
    ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
    ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_NbrOfChannel = configuredAdcChannels;
    ADC_Init(adc.ADCx, &ADC_InitStructure);

    uint8_t rank = 1;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(adc.ADCx, adcOperatingConfig[i].adcChannel, rank++, adcOperatingConfig[i].sampleTime);
    }

    ADC_DMACmd(adc.ADCx, ENABLE);
    ADC_Cmd(adc.ADCx, ENABLE);

    ADC_ResetCalibration(adc.ADCx);
    while (ADC_GetResetCalibrationStatus(adc.ADCx));
    ADC_StartCalibration(adc.ADCx);
    while (ADC_GetCalibrationStatus(adc.ADCx));

    ADC_SoftwareStartConvCmd(adc.ADCx, ENABLE);
}
コード例 #7
0
void ws2811LedStripHardwareInit(void)
{
    TimHandle.Instance = WS2811_TIMER;

    TimHandle.Init.Prescaler = 1;
    TimHandle.Init.Period = 135; // 800kHz
    TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
    TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
    if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
    {
        /* Initialization Error */
        return;
    }

    static DMA_HandleTypeDef  hdma_tim;

    ws2811IO = IOGetByTag(IO_TAG(WS2811_PIN));
    /* GPIOA Configuration: TIM5 Channel 1 as alternate function push-pull */
    IOInit(ws2811IO, OWNER_LED_STRIP, RESOURCE_OUTPUT, 0);
    IOConfigGPIOAF(ws2811IO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), WS2811_TIMER_GPIO_AF);

    __DMA1_CLK_ENABLE();

    
    /* Set the parameters to be configured */
    hdma_tim.Init.Channel  = WS2811_DMA_CHANNEL;
    hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
    hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
    hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD ;
    hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD ;
    hdma_tim.Init.Mode = DMA_NORMAL;
    hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
    hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
    hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
    hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;

    /* Set hdma_tim instance */
    hdma_tim.Instance = WS2811_DMA_STREAM;

    uint32_t channelAddress = 0;
    switch (WS2811_TIMER_CHANNEL) {
        case TIM_CHANNEL_1:
            timDMASource = TIM_DMA_ID_CC1;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR1);
            break;
        case TIM_CHANNEL_2:
            timDMASource = TIM_DMA_ID_CC2;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR2);
            break;
        case TIM_CHANNEL_3:
            timDMASource = TIM_DMA_ID_CC3;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR3);
            break;
        case TIM_CHANNEL_4:
            timDMASource = TIM_DMA_ID_CC4;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR4);
            break;
    }

    /* Link hdma_tim to hdma[x] (channelx) */
    __HAL_LINKDMA(&TimHandle, hdma[timDMASource], hdma_tim);

    dmaSetHandler(WS2811_DMA_HANDLER_IDENTIFER, WS2811_DMA_IRQHandler, NVIC_PRIO_WS2811_DMA, timDMASource);

    /* Initialize TIMx DMA handle */
    if(HAL_DMA_Init(TimHandle.hdma[timDMASource]) != HAL_OK)
    {
        /* Initialization Error */
        return;
    }

    TIM_OC_InitTypeDef TIM_OCInitStructure;

    /* PWM1 Mode configuration: Channel1 */
    TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
    TIM_OCInitStructure.Pulse = 0;
    TIM_OCInitStructure.OCPolarity = TIM_OCPOLARITY_HIGH;
    TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
    TIM_OCInitStructure.OCNIdleState  = TIM_OCNIDLESTATE_RESET;
    TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;

    if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &TIM_OCInitStructure, WS2811_TIMER_CHANNEL) != HAL_OK)
    {
        /* Configuration Error */
        return;
    }

    const hsvColor_t hsv_white = {  0, 255, 255};
    ws2811Initialised = true;
    setStripColor(&hsv_white);
}
コード例 #8
0
void pwmDigitalMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType)
{
    motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
    motor->timerHardware = timerHardware;

    TIM_TypeDef *timer = timerHardware->tim;
    const IO_t motorIO = IOGetByTag(timerHardware->tag);

    const uint8_t timerIndex = getTimerIndex(timer);
    const bool configureTimer = (timerIndex == dmaMotorTimerCount-1);

    IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), timerHardware->alternateFunction);

    __DMA1_CLK_ENABLE();

    if (configureTimer) {
        RCC_ClockCmd(timerRCC(timer), ENABLE);

        uint32_t hz;
        switch (pwmProtocolType) {
            case(PWM_TYPE_DSHOT600):
                hz = MOTOR_DSHOT600_MHZ * 1000000;
                break;
            case(PWM_TYPE_DSHOT300):
                hz = MOTOR_DSHOT300_MHZ * 1000000;
                break;
            default:
            case(PWM_TYPE_DSHOT150):
                hz = MOTOR_DSHOT150_MHZ * 1000000;
        }

        motor->TimHandle.Instance = timerHardware->tim;
        motor->TimHandle.Init.Prescaler = (SystemCoreClock / timerClockDivisor(timer) / hz) - 1;;
        motor->TimHandle.Init.Period = MOTOR_BITLENGTH;
        motor->TimHandle.Init.RepetitionCounter = 0;
        motor->TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
        motor->TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
        if(HAL_TIM_PWM_Init(&motor->TimHandle) != HAL_OK)
        {
            /* Initialization Error */
            return;
        }

    }
    else
    {
        motor->TimHandle = dmaMotors[timerIndex].TimHandle;
    }

    switch (timerHardware->channel) {
        case TIM_CHANNEL_1:
            motor->timerDmaSource = TIM_DMA_ID_CC1;
            break;
        case TIM_CHANNEL_2:
            motor->timerDmaSource = TIM_DMA_ID_CC2;
            break;
        case TIM_CHANNEL_3:
            motor->timerDmaSource = TIM_DMA_ID_CC3;
            break;
        case TIM_CHANNEL_4:
            motor->timerDmaSource = TIM_DMA_ID_CC4;
            break;
    }

    dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;

    /* Set the parameters to be configured */
    motor->hdma_tim.Init.Channel  = timerHardware->dmaChannel;
    motor->hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
    motor->hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
    motor->hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
    motor->hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
    motor->hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
    motor->hdma_tim.Init.Mode = DMA_NORMAL;
    motor->hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
    motor->hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    motor->hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
    motor->hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
    motor->hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;

    /* Set hdma_tim instance */
    if(timerHardware->dmaStream == NULL)
    {
        /* Initialization Error */
        return;
    }
    motor->hdma_tim.Instance = timerHardware->dmaStream;

    /* Link hdma_tim to hdma[x] (channelx) */
    __HAL_LINKDMA(&motor->TimHandle, hdma[motor->timerDmaSource], motor->hdma_tim);

    dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);

    /* Initialize TIMx DMA handle */
    if(HAL_DMA_Init(motor->TimHandle.hdma[motor->timerDmaSource]) != HAL_OK)
    {
        /* Initialization Error */
        return;
    }

    TIM_OC_InitTypeDef TIM_OCInitStructure;

    /* PWM1 Mode configuration: Channel1 */
    TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
    TIM_OCInitStructure.OCPolarity = TIM_OCPOLARITY_HIGH;
    TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
    TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_RESET;
    TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;
    TIM_OCInitStructure.Pulse = 0;

    if(HAL_TIM_PWM_ConfigChannel(&motor->TimHandle, &TIM_OCInitStructure, motor->timerHardware->channel) != HAL_OK)
    {
        /* Configuration Error */
        return;
    }
}
コード例 #9
0
void adcInit(drv_adc_config_t *init)
{
    ADC_InitTypeDef ADC_InitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    uint8_t i;
    uint8_t configuredAdcChannels = 0;

    memset(&adcConfig, 0, sizeof(adcConfig));

#if !defined(VBAT_ADC_PIN) && !defined(EXTERNAL1_ADC_PIN) && !defined(RSSI_ADC_PIN) && !defined(CURRENT_METER_ADC_PIN)
    UNUSED(init);
#endif

#ifdef VBAT_ADC_PIN
    if (init->enableVBat) {
        IOInit(IOGetByTag(IO_TAG(VBAT_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
        IOConfigGPIO(IOGetByTag(IO_TAG(VBAT_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcConfig[ADC_BATTERY].adcChannel = VBAT_ADC_CHANNEL;
        adcConfig[ADC_BATTERY].dmaIndex = configuredAdcChannels++;
        adcConfig[ADC_BATTERY].enabled = true;
        adcConfig[ADC_BATTERY].sampleTime = ADC_SampleTime_480Cycles;
    }
#endif

#ifdef EXTERNAL1_ADC_PIN
    if (init->enableExternal1) {
        IOInit(IOGetByTag(IO_TAG(EXTERNAL1_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(EXTERNAL1_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcConfig[ADC_EXTERNAL1].adcChannel = EXTERNAL1_ADC_CHANNEL;
        adcConfig[ADC_EXTERNAL1].dmaIndex = configuredAdcChannels++;
        adcConfig[ADC_EXTERNAL1].enabled = true;
        adcConfig[ADC_EXTERNAL1].sampleTime = ADC_SampleTime_480Cycles;
    }
#endif

#ifdef RSSI_ADC_PIN
    if (init->enableRSSI) {
        IOInit(IOGetByTag(IO_TAG(RSSI_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(RSSI_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcConfig[ADC_RSSI].adcChannel = RSSI_ADC_CHANNEL;
        adcConfig[ADC_RSSI].dmaIndex = configuredAdcChannels++;
        adcConfig[ADC_RSSI].enabled = true;
        adcConfig[ADC_RSSI].sampleTime = ADC_SampleTime_480Cycles;
    }
#endif

#ifdef CURRENT_METER_ADC_PIN
    if (init->enableCurrentMeter) {
        IOInit(IOGetByTag(IO_TAG(CURRENT_METER_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(CURRENT_METER_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcConfig[ADC_CURRENT].adcChannel = CURRENT_METER_ADC_CHANNEL;
        adcConfig[ADC_CURRENT].dmaIndex = configuredAdcChannels++;
        adcConfig[ADC_CURRENT].enabled = true;
        adcConfig[ADC_CURRENT].sampleTime = ADC_SampleTime_480Cycles;
    }
#endif

    //RCC_ADCCLKConfig(RCC_ADC12PLLCLK_Div256);  // 72 MHz divided by 256 = 281.25 kHz
    
    RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA2, ENABLE);
    RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);

    DMA_DeInit(DMA2_Stream4);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR;
    DMA_InitStructure.DMA_Channel = DMA_Channel_0;
    DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory;
    DMA_InitStructure.DMA_BufferSize = configuredAdcChannels;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = configuredAdcChannels > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_Init(DMA2_Stream4, &DMA_InitStructure);

    DMA_Cmd(DMA2_Stream4, ENABLE);

    // calibrate

    /*
    ADC_VoltageRegulatorCmd(ADC1, ENABLE);
    delay(10);
    ADC_SelectCalibrationMode(ADC1, ADC_CalibrationMode_Single);
    ADC_StartCalibration(ADC1);
    while(ADC_GetCalibrationStatus(ADC1) != RESET);
    ADC_VoltageRegulatorCmd(ADC1, DISABLE);
    */

    ADC_CommonInitTypeDef ADC_CommonInitStructure;

    ADC_CommonStructInit(&ADC_CommonInitStructure);
    ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div8;
    ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
    ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
    ADC_CommonInit(&ADC_CommonInitStructure);

    ADC_StructInit(&ADC_InitStructure);

    ADC_InitStructure.ADC_ContinuousConvMode    = ENABLE;
    ADC_InitStructure.ADC_Resolution            = ADC_Resolution_12b;
    ADC_InitStructure.ADC_ExternalTrigConv 		= ADC_ExternalTrigConv_T1_CC1;
    ADC_InitStructure.ADC_ExternalTrigConvEdge 	= ADC_ExternalTrigConvEdge_None;
    ADC_InitStructure.ADC_DataAlign             = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_NbrOfConversion       = configuredAdcChannels;
    ADC_InitStructure.ADC_ScanConvMode 			= configuredAdcChannels > 1 ? ENABLE : DISABLE; // 1=scan more that one channel in group

    ADC_Init(ADC1, &ADC_InitStructure);

    uint8_t rank = 1;
    for (i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(ADC1, adcConfig[i].adcChannel, rank++, adcConfig[i].sampleTime);
    }
    ADC_DMARequestAfterLastTransferCmd(ADC1, ENABLE);

    ADC_DMACmd(ADC1, ENABLE);
    ADC_Cmd(ADC1, ENABLE);

    ADC_SoftwareStartConv(ADC1);
}
コード例 #10
0
ファイル: adc_stm32f30x.c プロジェクト: AXH2O/raceflight
void adcInit(drv_adc_config_t *init)
{
    ADC_InitTypeDef ADC_InitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    uint8_t i;
    uint8_t adcChannelCount = 0;

    memset(&adcConfig, 0, sizeof(adcConfig));

#ifdef VBAT_ADC_PIN
    if (init->enableVBat) {
	    IOInit(IOGetByTag(IO_TAG(VBAT_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(VBAT_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));

        adcConfig[ADC_BATTERY].adcChannel = VBAT_ADC_CHANNEL;
        adcConfig[ADC_BATTERY].dmaIndex = adcChannelCount;
        adcConfig[ADC_BATTERY].sampleTime = ADC_SampleTime_601Cycles5;
        adcConfig[ADC_BATTERY].enabled = true;
        adcChannelCount++;
    }
#endif

#ifdef RSSI_ADC_PIN
    if (init->enableRSSI) {
	    IOInit(IOGetByTag(IO_TAG(RSSI_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(RSSI_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));

        adcConfig[ADC_RSSI].adcChannel = RSSI_ADC_CHANNEL;
        adcConfig[ADC_RSSI].dmaIndex = adcChannelCount;
        adcConfig[ADC_RSSI].sampleTime = ADC_SampleTime_601Cycles5;
        adcConfig[ADC_RSSI].enabled = true;
        adcChannelCount++;
    }
#endif

#ifdef CURRENT_METER_ADC_PIN
    if (init->enableCurrentMeter) {
	    IOInit(IOGetByTag(IO_TAG(CURRENT_METER_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(CURRENT_METER_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));

        adcConfig[ADC_CURRENT].adcChannel = CURRENT_METER_ADC_CHANNEL;
        adcConfig[ADC_CURRENT].dmaIndex = adcChannelCount;
        adcConfig[ADC_CURRENT].sampleTime = ADC_SampleTime_601Cycles5;
        adcConfig[ADC_CURRENT].enabled = true;
        adcChannelCount++;
    }
#endif

#ifdef EXTERNAL1_ADC_PIN
    if (init->enableExternal1) {
	    IOInit(IOGetByTag(IO_TAG(EXTERNAL1_ADC_PIN)), OWNER_SYSTEM, RESOURCE_ADC);
	    IOConfigGPIO(IOGetByTag(IO_TAG(EXTERNAL1_ADC_PIN)), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));

        adcConfig[ADC_EXTERNAL1].adcChannel = EXTERNAL1_ADC_CHANNEL;
        adcConfig[ADC_EXTERNAL1].dmaIndex = adcChannelCount;
        adcConfig[ADC_EXTERNAL1].sampleTime = ADC_SampleTime_601Cycles5;
        adcConfig[ADC_EXTERNAL1].enabled = true;
        adcChannelCount++;
    }
#endif

    RCC_ADCCLKConfig(RCC_ADC12PLLCLK_Div256);  // 72 MHz divided by 256 = 281.25 kHz
    RCC_AHBPeriphClockCmd(ADC_AHB_PERIPHERAL | RCC_AHBPeriph_ADC12, ENABLE);

    DMA_DeInit(ADC_DMA_CHANNEL);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&ADC_INSTANCE->DR;
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
    DMA_InitStructure.DMA_BufferSize = adcChannelCount;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = adcChannelCount > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;

    DMA_Init(ADC_DMA_CHANNEL, &DMA_InitStructure);

    DMA_Cmd(ADC_DMA_CHANNEL, ENABLE);


    // calibrate

    ADC_VoltageRegulatorCmd(ADC_INSTANCE, ENABLE);
    delay(10);
    ADC_SelectCalibrationMode(ADC_INSTANCE, ADC_CalibrationMode_Single);
    ADC_StartCalibration(ADC_INSTANCE);
    while(ADC_GetCalibrationStatus(ADC_INSTANCE) != RESET);
    ADC_VoltageRegulatorCmd(ADC_INSTANCE, DISABLE);


    ADC_CommonInitTypeDef ADC_CommonInitStructure;

    ADC_CommonStructInit(&ADC_CommonInitStructure);
    ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_CommonInitStructure.ADC_Clock = ADC_Clock_SynClkModeDiv4;
    ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_1;
    ADC_CommonInitStructure.ADC_DMAMode = ADC_DMAMode_Circular;
    ADC_CommonInitStructure.ADC_TwoSamplingDelay = 0;
    ADC_CommonInit(ADC_INSTANCE, &ADC_CommonInitStructure);

    ADC_StructInit(&ADC_InitStructure);

    ADC_InitStructure.ADC_ContinuousConvMode    = ADC_ContinuousConvMode_Enable;
    ADC_InitStructure.ADC_Resolution            = ADC_Resolution_12b;
    ADC_InitStructure.ADC_ExternalTrigConvEvent = ADC_ExternalTrigConvEvent_0;
    ADC_InitStructure.ADC_ExternalTrigEventEdge = ADC_ExternalTrigEventEdge_None;
    ADC_InitStructure.ADC_DataAlign             = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_OverrunMode           = ADC_OverrunMode_Disable;
    ADC_InitStructure.ADC_AutoInjMode           = ADC_AutoInjec_Disable;
    ADC_InitStructure.ADC_NbrOfRegChannel       = adcChannelCount;

    ADC_Init(ADC_INSTANCE, &ADC_InitStructure);

    uint8_t rank = 1;
    for (i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(ADC_INSTANCE, adcConfig[i].adcChannel, rank++, adcConfig[i].sampleTime);
    }

    ADC_Cmd(ADC_INSTANCE, ENABLE);

    while(!ADC_GetFlagStatus(ADC_INSTANCE, ADC_FLAG_RDY));

    ADC_DMAConfig(ADC_INSTANCE, ADC_DMAMode_Circular);

    ADC_DMACmd(ADC_INSTANCE, ENABLE);

    ADC_StartConversion(ADC_INSTANCE);
}
コード例 #11
0
void ws2811LedStripHardwareInit(void)
{
    TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
    TIM_OCInitTypeDef  TIM_OCInitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    uint16_t prescalerValue;

    dmaSetHandler(WS2811_DMA_HANDLER_IDENTIFER, WS2811_DMA_IRQHandler, NVIC_PRIO_WS2811_DMA, 0);

    ws2811IO = IOGetByTag(IO_TAG(WS2811_PIN));
/* GPIOA Configuration: TIM5 Channel 1 as alternate function push-pull */
    IOInit(ws2811IO, OWNER_LED_STRIP, RESOURCE_OUTPUT, 0);
    IOConfigGPIO(ws2811IO, IO_CONFIG(GPIO_Speed_50MHz, GPIO_Mode_AF_PP));

    RCC_ClockCmd(timerRCC(WS2811_TIMER), ENABLE);

    /* Compute the prescaler value */
    prescalerValue = (uint16_t) (SystemCoreClock / 24000000) - 1;
    /* Time base configuration */
    TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
    TIM_TimeBaseStructure.TIM_Period = 29; // 800kHz
    TIM_TimeBaseStructure.TIM_Prescaler = prescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);

    /* PWM1 Mode configuration: Channel1 */
    TIM_OCStructInit(&TIM_OCInitStructure);
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 0;
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
    TIM_OC1Init(TIM3, &TIM_OCInitStructure);
    TIM_OC1PreloadConfig(TIM3, TIM_OCPreload_Enable);

    TIM_CtrlPWMOutputs(TIM3, ENABLE);

    /* configure DMA */
    /* DMA clock enable */
    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);

    /* DMA1 Channel6 Config */
    DMA_DeInit(DMA1_Channel6);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&TIM3->CCR1;
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)ledStripDMABuffer;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
    DMA_InitStructure.DMA_BufferSize = WS2811_DMA_BUFFER_SIZE;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;

    DMA_Init(DMA1_Channel6, &DMA_InitStructure);

    /* TIM3 CC1 DMA Request enable */
    TIM_DMACmd(TIM3, TIM_DMA_CC1, ENABLE);

    DMA_ITConfig(DMA1_Channel6, DMA_IT_TC, ENABLE);

    const hsvColor_t hsv_white = {  0, 255, 255};
    ws2811Initialised = true;
    setStripColor(&hsv_white);
    ws2811UpdateStrip();
}
コード例 #12
0
ファイル: adc_stm32f4xx.c プロジェクト: AlienWiiBF/betaflight
void adcInit(adcConfig_t *config)
{
    ADC_InitTypeDef ADC_InitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    uint8_t i;
    uint8_t configuredAdcChannels = 0;

    memset(&adcOperatingConfig, 0, sizeof(adcOperatingConfig));

    if (config->vbat.enabled) {
        adcOperatingConfig[ADC_BATTERY].tag = config->vbat.ioTag;
    }

    if (config->rssi.enabled) {
        adcOperatingConfig[ADC_RSSI].tag = config->rssi.ioTag;  //RSSI_ADC_CHANNEL;
    }

    if (config->external1.enabled) {
        adcOperatingConfig[ADC_EXTERNAL1].tag = config->external1.ioTag; //EXTERNAL1_ADC_CHANNEL;
    }

    if (config->currentMeter.enabled) {
        adcOperatingConfig[ADC_CURRENT].tag = config->currentMeter.ioTag;  //CURRENT_METER_ADC_CHANNEL;
    }

    ADCDevice device = adcDeviceByInstance(ADC_INSTANCE);
    if (device == ADCINVALID)
        return;

    adcDevice_t adc = adcHardware[device];

    bool adcActive = false;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].tag)
            continue;

        adcActive = true;
        IOInit(IOGetByTag(adcOperatingConfig[i].tag), OWNER_ADC_BATT + i, 0);
        IOConfigGPIO(IOGetByTag(adcOperatingConfig[i].tag), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        adcOperatingConfig[i].adcChannel = adcChannelByTag(adcOperatingConfig[i].tag);
        adcOperatingConfig[i].dmaIndex = configuredAdcChannels++;
        adcOperatingConfig[i].sampleTime = ADC_SampleTime_480Cycles;
        adcOperatingConfig[i].enabled = true;
    }

    if (!adcActive) {
        return;
    }
    
    RCC_ClockCmd(adc.rccADC, ENABLE);

    dmaInit(dmaGetIdentifier(adc.DMAy_Streamx), OWNER_ADC, 0);

    DMA_DeInit(adc.DMAy_Streamx);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&adc.ADCx->DR;
    DMA_InitStructure.DMA_Channel = adc.channel;
    DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory;
    DMA_InitStructure.DMA_BufferSize = configuredAdcChannels;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = configuredAdcChannels > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_Init(adc.DMAy_Streamx, &DMA_InitStructure);

    DMA_Cmd(adc.DMAy_Streamx, ENABLE);

    ADC_CommonInitTypeDef ADC_CommonInitStructure;

    ADC_CommonStructInit(&ADC_CommonInitStructure);
    ADC_CommonInitStructure.ADC_Mode             = ADC_Mode_Independent;
    ADC_CommonInitStructure.ADC_Prescaler        = ADC_Prescaler_Div8;
    ADC_CommonInitStructure.ADC_DMAAccessMode    = ADC_DMAAccessMode_Disabled;
    ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
    ADC_CommonInit(&ADC_CommonInitStructure);

    ADC_StructInit(&ADC_InitStructure);

    ADC_InitStructure.ADC_ContinuousConvMode       = ENABLE;
    ADC_InitStructure.ADC_Resolution               = ADC_Resolution_12b;
    ADC_InitStructure.ADC_ExternalTrigConv         = ADC_ExternalTrigConv_T1_CC1;
    ADC_InitStructure.ADC_ExternalTrigConvEdge     = ADC_ExternalTrigConvEdge_None;
    ADC_InitStructure.ADC_DataAlign                = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_NbrOfConversion          = configuredAdcChannels;
    ADC_InitStructure.ADC_ScanConvMode             = configuredAdcChannels > 1 ? ENABLE : DISABLE; // 1=scan more that one channel in group

    ADC_Init(adc.ADCx, &ADC_InitStructure);

    uint8_t rank = 1;
    for (i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(adc.ADCx, adcOperatingConfig[i].adcChannel, rank++, adcOperatingConfig[i].sampleTime);
    }
    ADC_DMARequestAfterLastTransferCmd(adc.ADCx, ENABLE);

    ADC_DMACmd(adc.ADCx, ENABLE);
    ADC_Cmd(adc.ADCx, ENABLE);

    ADC_SoftwareStartConv(adc.ADCx);
}
コード例 #13
0
ファイル: adc_stm32f7xx.c プロジェクト: npsm/inav
void adcInit(drv_adc_config_t *init)
{
    uint8_t i;
    uint8_t configuredAdcChannels = 0;

    memset(&adcConfig, 0, sizeof(adcConfig));

#ifdef VBAT_ADC_PIN
    if (init->enableVBat) {
        adcConfig[ADC_BATTERY].tag = IO_TAG(VBAT_ADC_PIN); //VBAT_ADC_CHANNEL;
    }
#endif

#ifdef RSSI_ADC_PIN
    if (init->enableRSSI) {
        adcConfig[ADC_RSSI].tag = IO_TAG(RSSI_ADC_PIN);  //RSSI_ADC_CHANNEL;
    }
#endif

#ifdef EXTERNAL1_ADC_PIN
    if (init->enableExternal1) {
        adcConfig[ADC_EXTERNAL1].tag = IO_TAG(EXTERNAL1_ADC_PIN); //EXTERNAL1_ADC_CHANNEL;
    }
#endif

#ifdef CURRENT_METER_ADC_PIN
    if (init->enableCurrentMeter) {
        adcConfig[ADC_CURRENT].tag = IO_TAG(CURRENT_METER_ADC_PIN);  //CURRENT_METER_ADC_CHANNEL;
    }
#endif
    __HAL_RCC_DMA2_CLK_ENABLE();
    __HAL_RCC_ADC1_CLK_ENABLE();
    
    AdcHandle_1.Instance          = ADC1;

    AdcHandle_1.Init.ClockPrescaler        = ADC_CLOCKPRESCALER_PCLK_DIV8;
    AdcHandle_1.Init.Resolution            = ADC_RESOLUTION_12B;
    AdcHandle_1.Init.ScanConvMode          = configuredAdcChannels > 1 ? ENABLE : DISABLE;
    AdcHandle_1.Init.ContinuousConvMode    = ENABLE;
    AdcHandle_1.Init.DiscontinuousConvMode = DISABLE;
    AdcHandle_1.Init.NbrOfDiscConversion   = 0;
    AdcHandle_1.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;        /* Conversion start trigged at each external event */
    AdcHandle_1.Init.ExternalTrigConv      = ADC_EXTERNALTRIGCONV_T1_CC1;
    AdcHandle_1.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
    AdcHandle_1.Init.NbrOfConversion       = configuredAdcChannels;
    AdcHandle_1.Init.DMAContinuousRequests = ENABLE;
    AdcHandle_1.Init.EOCSelection          = DISABLE;

    HAL_ADC_Init(&AdcHandle_1);


    hdma_adc_1.Instance = MCU_ADC1_DMA_STREAM;
  
    hdma_adc_1.Init.Channel  = MCU_ADC1_DMA_CHANNEL;
    hdma_adc_1.Init.Direction = DMA_PERIPH_TO_MEMORY;
    hdma_adc_1.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_adc_1.Init.MemInc = configuredAdcChannels > 1 ? DMA_MINC_ENABLE : DMA_MINC_DISABLE;;
    hdma_adc_1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
    hdma_adc_1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
    hdma_adc_1.Init.Mode = DMA_CIRCULAR;
    hdma_adc_1.Init.Priority = DMA_PRIORITY_HIGH;
    hdma_adc_1.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    hdma_adc_1.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL;
    hdma_adc_1.Init.MemBurst = DMA_MBURST_SINGLE;
    hdma_adc_1.Init.PeriphBurst = DMA_PBURST_SINGLE;
  
    HAL_DMA_Init(&hdma_adc_1);
  
    /* Associate the initialized DMA handle to the ADC handle */
    __HAL_LINKDMA(&AdcHandle_1, DMA_Handle, hdma_adc_1);
  
    /* NVIC configuration for DMA transfer complete interrupt */
//    HAL_NVIC_SetPriority(MCU_ADC1_DMA_STREAM_IRQn, NVIC_PRIORITY_BASE(NVIC_PRIO_ADC1_DMA), NVIC_PRIORITY_SUB(NVIC_PRIO_ADC1_DMA));
//    HAL_NVIC_EnableIRQ(MCU_ADC1_DMA_STREAM_IRQn);    

    uint8_t rank = 1;
    for (i = 0; i < ADC_CHANNEL_COUNT; i++) 
    {
        if (!adcConfig[i].enabled) {
            continue;
        }
        
        IOInit(IOGetByTag(adcConfig[i].tag), OWNER_ADC, RESOURCE_ADC_BATTERY + i, 0);
        IOConfigGPIO(IOGetByTag(adcConfig[i].tag), IO_CONFIG(GPIO_Mode_AN, 0, GPIO_OType_OD, GPIO_PuPd_NOPULL));
        ADC_ChannelConfTypeDef sConfig;        
        sConfig.Channel      = adcChannelByTag(adcConfig[i].tag);
        sConfig.Rank         = rank++;
        sConfig.SamplingTime = ADC_SAMPLETIME_480CYCLES;
        sConfig.Offset       = 0;
        HAL_ADC_ConfigChannel(&AdcHandle_1, &sConfig);
    }

    HAL_ADC_Start_DMA(&AdcHandle_1, (uint32_t*)&adcValues, configuredAdcChannels);
}
コード例 #14
0
void pwmDshotMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType, uint8_t output)
{
    motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
    motor->timerHardware = timerHardware;

    TIM_TypeDef *timer = timerHardware->tim;
    const IO_t motorIO = IOGetByTag(timerHardware->tag);

    const uint8_t timerIndex = getTimerIndex(timer);

    IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), timerHardware->alternateFunction);

    __DMA1_CLK_ENABLE();

    RCC_ClockCmd(timerRCC(timer), ENABLE);

    motor->TimHandle.Instance = timerHardware->tim;
    motor->TimHandle.Init.Prescaler = (timerClock(timer) / getDshotHz(pwmProtocolType)) - 1;
    motor->TimHandle.Init.Period = pwmProtocolType == PWM_TYPE_PROSHOT1000 ? MOTOR_NIBBLE_LENGTH_PROSHOT : MOTOR_BITLENGTH;
    motor->TimHandle.Init.RepetitionCounter = 0;
    motor->TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
    motor->TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
    motor->TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
    if (HAL_TIM_PWM_Init(&motor->TimHandle) != HAL_OK) {
        /* Initialization Error */
        return;
    }

    motor->timerDmaSource = timerDmaSource(timerHardware->channel);
    dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;

    /* Set the parameters to be configured */
    motor->hdma_tim.Init.Channel = timerHardware->dmaChannel;
    motor->hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
    motor->hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
    motor->hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
    motor->hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
    motor->hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
    motor->hdma_tim.Init.Mode = DMA_NORMAL;
    motor->hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
    motor->hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    motor->hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
    motor->hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
    motor->hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;

    /* Set hdma_tim instance */
    if (timerHardware->dmaRef == NULL) {
        /* Initialization Error */
        return;
    }
    motor->hdma_tim.Instance = timerHardware->dmaRef;

    /* Link hdma_tim to hdma[x] (channelx) */
    __HAL_LINKDMA(&motor->TimHandle, hdma[motor->timerDmaSource], motor->hdma_tim);

    dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);

    /* Initialize TIMx DMA handle */
    if (HAL_DMA_Init(motor->TimHandle.hdma[motor->timerDmaSource]) != HAL_OK) {
        /* Initialization Error */
        return;
    }

    TIM_OC_InitTypeDef TIM_OCInitStructure;

    /* PWM1 Mode configuration: Channel1 */
    TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
    if (output & TIMER_OUTPUT_N_CHANNEL) {
        TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
        TIM_OCInitStructure.OCPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCPOLARITY_HIGH : TIM_OCPOLARITY_LOW;
        TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_RESET;
        TIM_OCInitStructure.OCNPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPOLARITY_HIGH : TIM_OCNPOLARITY_LOW;
    } else {
        TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_SET;
        TIM_OCInitStructure.OCPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCPOLARITY_LOW : TIM_OCPOLARITY_HIGH;
        TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_SET;
        TIM_OCInitStructure.OCNPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPOLARITY_LOW : TIM_OCNPOLARITY_HIGH;
    }
    TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;
    TIM_OCInitStructure.Pulse = 0;

    if (HAL_TIM_PWM_ConfigChannel(&motor->TimHandle, &TIM_OCInitStructure, motor->timerHardware->channel) != HAL_OK) {
        /* Configuration Error */
        return;
    }
}
コード例 #15
0
void pwmDigitalMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType)
{
    TIM_OCInitTypeDef TIM_OCInitStructure;
    DMA_InitTypeDef DMA_InitStructure;

    motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
    motor->timerHardware = timerHardware;

    TIM_TypeDef *timer = timerHardware->tim;
    const IO_t motorIO = IOGetByTag(timerHardware->tag);

    const uint8_t timerIndex = getTimerIndex(timer);
    const bool configureTimer = (timerIndex == dmaMotorTimerCount-1);

    IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_Mode_AF, GPIO_Speed_50MHz, GPIO_OType_PP, GPIO_PuPd_UP), timerHardware->alternateFunction);

    if (configureTimer) {
        TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
        TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);

        RCC_ClockCmd(timerRCC(timer), ENABLE);
        TIM_Cmd(timer, DISABLE);

        uint32_t hz;
        switch (pwmProtocolType) {
            case(PWM_TYPE_DSHOT600):
                hz = MOTOR_DSHOT600_MHZ * 1000000;
                break;
            case(PWM_TYPE_DSHOT300):
                hz = MOTOR_DSHOT300_MHZ * 1000000;
                break;
            default:
            case(PWM_TYPE_DSHOT150):
                hz = MOTOR_DSHOT150_MHZ * 1000000;
        }

        TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)((SystemCoreClock / timerClockDivisor(timer) / hz) - 1);
        TIM_TimeBaseStructure.TIM_Period = MOTOR_BITLENGTH;
        TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
        TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
        TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
        TIM_TimeBaseInit(timer, &TIM_TimeBaseStructure);
    }

    TIM_OCStructInit(&TIM_OCInitStructure);
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    if (timerHardware->output & TIMER_OUTPUT_N_CHANNEL) {
        TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
        TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCNIdleState_Reset;
        TIM_OCInitStructure.TIM_OCNPolarity = (timerHardware->output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPolarity_Low : TIM_OCNPolarity_High;
    } else {
        TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
        TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
        TIM_OCInitStructure.TIM_OCPolarity =  (timerHardware->output & TIMER_OUTPUT_INVERTED) ? TIM_OCPolarity_Low : TIM_OCPolarity_High;
    }
    TIM_OCInitStructure.TIM_Pulse = 0;

    timerOCInit(timer, timerHardware->channel, &TIM_OCInitStructure);
    timerOCPreloadConfig(timer, timerHardware->channel, TIM_OCPreload_Enable);
    motor->timerDmaSource = timerDmaSource(timerHardware->channel);
    dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;

    TIM_CCxCmd(timer, timerHardware->channel, TIM_CCx_Enable);

    if (configureTimer) {
        TIM_CtrlPWMOutputs(timer, ENABLE);
        TIM_ARRPreloadConfig(timer, ENABLE);
        TIM_Cmd(timer, ENABLE);
    }

    DMA_Channel_TypeDef *channel = timerHardware->dmaChannel;

    if (channel == NULL) {
        /* trying to use a non valid channel */
        return;
    }

    dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
    dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);

    DMA_Cmd(channel, DISABLE);
    DMA_DeInit(channel);
    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)timerChCCR(timerHardware);
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)motor->dmaBuffer;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
    DMA_InitStructure.DMA_BufferSize = MOTOR_DMA_BUFFER_SIZE;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;

    DMA_Init(channel, &DMA_InitStructure);

    DMA_ITConfig(channel, DMA_IT_TC, ENABLE);
}
コード例 #16
0
ファイル: adc_stm32f10x.c プロジェクト: iforce2d/cleanflight
void adcInit(drv_adc_config_t *init)
{

#if !defined(VBAT_ADC_PIN) && !defined(EXTERNAL1_ADC_PIN) && !defined(RSSI_ADC_PIN) && !defined(CURRENT_METER_ADC_PIN)
    UNUSED(init);
#endif

    uint8_t configuredAdcChannels = 0;

    memset(&adcConfig, 0, sizeof(adcConfig));

#ifdef VBAT_ADC_PIN
    if (init->enableVBat) {
        adcConfig[ADC_BATTERY].tag = IO_TAG(VBAT_ADC_PIN);
    }
#endif

#ifdef RSSI_ADC_PIN
    if (init->enableRSSI) {
        adcConfig[ADC_RSSI].tag = IO_TAG(RSSI_ADC_PIN);
    }
#endif

#ifdef EXTERNAL1_ADC_PIN
    if (init->enableExternal1) {
        adcConfig[ADC_EXTERNAL1].tag = IO_TAG(EXTERNAL1_ADC_PIN);
    }
#endif

#ifdef CURRENT_METER_ADC_PIN
    if (init->enableCurrentMeter) {
        adcConfig[ADC_CURRENT].tag = IO_TAG(CURRENT_METER_ADC_PIN);
    }
#endif

    ADCDevice device = adcDeviceByInstance(ADC_INSTANCE);
    if (device == ADCINVALID)
        return;

    const adcDevice_t adc = adcHardware[device];

    for (int  i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcConfig[i].tag)
            continue;

        IOInit(IOGetByTag(adcConfig[i].tag), OWNER_ADC, RESOURCE_ADC_BATTERY+i, 0);
        IOConfigGPIO(IOGetByTag(adcConfig[i].tag), IO_CONFIG(GPIO_Mode_AIN, 0));
        adcConfig[i].adcChannel = adcChannelByTag(adcConfig[i].tag);
        adcConfig[i].dmaIndex = configuredAdcChannels++;
        adcConfig[i].sampleTime = ADC_SampleTime_239Cycles5;
        adcConfig[i].enabled = true;
    }

    RCC_ADCCLKConfig(RCC_PCLK2_Div8);  // 9MHz from 72MHz APB2 clock(HSE), 8MHz from 64MHz (HSI)
    RCC_ClockCmd(adc.rccADC, ENABLE);
    RCC_ClockCmd(adc.rccDMA, ENABLE);

    DMA_DeInit(adc.DMAy_Channelx);
    DMA_InitTypeDef DMA_InitStructure;
    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&adc.ADCx->DR;
    DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)adcValues;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
    DMA_InitStructure.DMA_BufferSize = configuredAdcChannels;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = configuredAdcChannels > 1 ? DMA_MemoryInc_Enable : DMA_MemoryInc_Disable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
    DMA_InitStructure.DMA_Priority = DMA_Priority_High;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
    DMA_Init(adc.DMAy_Channelx, &DMA_InitStructure);
    DMA_Cmd(adc.DMAy_Channelx, ENABLE);

    ADC_InitTypeDef ADC_InitStructure;
    ADC_StructInit(&ADC_InitStructure);
    ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
    ADC_InitStructure.ADC_ScanConvMode = configuredAdcChannels > 1 ? ENABLE : DISABLE;
    ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
    ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
    ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
    ADC_InitStructure.ADC_NbrOfChannel = configuredAdcChannels;
    ADC_Init(adc.ADCx, &ADC_InitStructure);

    uint8_t rank = 1;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcConfig[i].enabled) {
            continue;
        }
        ADC_RegularChannelConfig(adc.ADCx, adcConfig[i].adcChannel, rank++, adcConfig[i].sampleTime);
    }

    ADC_DMACmd(adc.ADCx, ENABLE);
    ADC_Cmd(adc.ADCx, ENABLE);

    ADC_ResetCalibration(adc.ADCx);
    while (ADC_GetResetCalibrationStatus(adc.ADCx));
    ADC_StartCalibration(adc.ADCx);
    while (ADC_GetCalibrationStatus(adc.ADCx));

    ADC_SoftwareStartConvCmd(adc.ADCx, ENABLE);
}
コード例 #17
0
ファイル: adc_stm32f7xx.c プロジェクト: rotcehdnih/betaflight
void adcInit(const adcConfig_t *config)
{
    uint8_t i;
    uint8_t configuredAdcChannels = 0;

    memset(&adcOperatingConfig, 0, sizeof(adcOperatingConfig));

    if (config->vbat.enabled) {
        adcOperatingConfig[ADC_BATTERY].tag = config->vbat.ioTag;
    }

    if (config->rssi.enabled) {
        adcOperatingConfig[ADC_RSSI].tag = config->rssi.ioTag;  //RSSI_ADC_CHANNEL;
    }

    if (config->external1.enabled) {
        adcOperatingConfig[ADC_EXTERNAL1].tag = config->external1.ioTag; //EXTERNAL1_ADC_CHANNEL;
    }

    if (config->current.enabled) {
        adcOperatingConfig[ADC_CURRENT].tag = config->current.ioTag;  //CURRENT_METER_ADC_CHANNEL;
    }

    ADCDevice device = adcDeviceByInstance(ADC_INSTANCE);
    if (device == ADCINVALID)
        return;

    adcDevice_t adc = adcHardware[device];

    bool adcActive = false;
    for (int i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcVerifyPin(adcOperatingConfig[i].tag, device)) {
            continue;
        }

        adcActive = true;
        IOInit(IOGetByTag(adcOperatingConfig[i].tag), OWNER_ADC_BATT + i, 0);
        IOConfigGPIO(IOGetByTag(adcOperatingConfig[i].tag), IO_CONFIG(GPIO_MODE_ANALOG, 0, GPIO_NOPULL));
        adcOperatingConfig[i].adcChannel = adcChannelByTag(adcOperatingConfig[i].tag);
        adcOperatingConfig[i].dmaIndex = configuredAdcChannels++;
        adcOperatingConfig[i].sampleTime = ADC_SAMPLETIME_480CYCLES;
        adcOperatingConfig[i].enabled = true;
    }

    if (!adcActive) {
        return;
    }

    RCC_ClockCmd(adc.rccADC, ENABLE);
    dmaInit(dmaGetIdentifier(adc.DMAy_Streamx), OWNER_ADC, 0);

    adc.ADCHandle.Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV8;
    adc.ADCHandle.Init.ContinuousConvMode    = ENABLE;
    adc.ADCHandle.Init.Resolution            = ADC_RESOLUTION_12B;
    adc.ADCHandle.Init.ExternalTrigConv      = ADC_EXTERNALTRIGCONV_T1_CC1;
    adc.ADCHandle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
    adc.ADCHandle.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
    adc.ADCHandle.Init.NbrOfConversion       = configuredAdcChannels;
    adc.ADCHandle.Init.ScanConvMode          = configuredAdcChannels > 1 ? ENABLE : DISABLE; // 1=scan more that one channel in group
    adc.ADCHandle.Init.DiscontinuousConvMode = DISABLE;
    adc.ADCHandle.Init.NbrOfDiscConversion   = 0;
    adc.ADCHandle.Init.DMAContinuousRequests = ENABLE;
    adc.ADCHandle.Init.EOCSelection          = DISABLE;
    adc.ADCHandle.Instance = adc.ADCx;

    /*##-1- Configure the ADC peripheral #######################################*/
    if (HAL_ADC_Init(&adc.ADCHandle) != HAL_OK)
    {
      /* Initialization Error */
    }

    adc.DmaHandle.Init.Channel = adc.channel;
    adc.DmaHandle.Init.Direction = DMA_PERIPH_TO_MEMORY;
    adc.DmaHandle.Init.PeriphInc = DMA_PINC_DISABLE;
    adc.DmaHandle.Init.MemInc = configuredAdcChannels > 1 ? DMA_MINC_ENABLE : DMA_MINC_DISABLE;
    adc.DmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
    adc.DmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
    adc.DmaHandle.Init.Mode = DMA_CIRCULAR;
    adc.DmaHandle.Init.Priority = DMA_PRIORITY_HIGH;
    adc.DmaHandle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    adc.DmaHandle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
    adc.DmaHandle.Init.MemBurst = DMA_MBURST_SINGLE;
    adc.DmaHandle.Init.PeriphBurst = DMA_PBURST_SINGLE;
    adc.DmaHandle.Instance = adc.DMAy_Streamx;

    /*##-2- Initialize the DMA stream ##########################################*/
    if (HAL_DMA_Init(&adc.DmaHandle) != HAL_OK)
    {
        /* Initialization Error */
    }

    __HAL_LINKDMA(&adc.ADCHandle, DMA_Handle, adc.DmaHandle);

    uint8_t rank = 1;
    for (i = 0; i < ADC_CHANNEL_COUNT; i++) {
        if (!adcOperatingConfig[i].enabled) {
            continue;
        }
        ADC_ChannelConfTypeDef sConfig;
        sConfig.Channel      = adcOperatingConfig[i].adcChannel;
        sConfig.Rank         = rank++;
        sConfig.SamplingTime = adcOperatingConfig[i].sampleTime;
        sConfig.Offset       = 0;

        /*##-3- Configure ADC regular channel ######################################*/
        if (HAL_ADC_ConfigChannel(&adc.ADCHandle, &sConfig) != HAL_OK)
        {
          /* Channel Configuration Error */
        }
    }

    //HAL_CLEANINVALIDATECACHE((uint32_t*)&adcValues, configuredAdcChannels);
    /*##-4- Start the conversion process #######################################*/
    if (HAL_ADC_Start_DMA(&adc.ADCHandle, (uint32_t*)&adcValues, configuredAdcChannels) != HAL_OK)
    {
        /* Start Conversation Error */
    }
}