static void
xsltNumberFormatTokenize(xmlChar *format,
xsltFormatPtr tokens)
{
int index = 0;
int j;
default_token.token = DEFAULT_TOKEN;
default_token.width = 1;
default_token.separator = BAD_CAST(DEFAULT_SEPARATOR);
tokens->start = NULL;
tokens->tokens[0].separator = NULL;
tokens->end = NULL;
/*
* Insert initial non-alphanumeric token.
* There is always such a token in the list, even if NULL
*/
while (! (IS_LETTER(format[index]) || IS_DIGIT(format[index]))) {
if (format[index] == 0)
break; /* while */
index++;
}
if (index > 0)
tokens->start = xmlStrndup(format, index);
for (tokens->nTokens = 0; tokens->nTokens < MAX_TOKENS;
tokens->nTokens++) {
if (format[index] == 0)
break; /* for */
/*
* separator has already been parsed (except for the first
* number) in tokens->end, recover it.
*/
if (tokens->nTokens > 0) {
tokens->tokens[tokens->nTokens].separator = tokens->end;
tokens->end = NULL;
}
if (IS_DIGIT_ONE(format[index]) ||
IS_DIGIT_ZERO(format[index])) {
tokens->tokens[tokens->nTokens].width = 1;
while (IS_DIGIT_ZERO(format[index])) {
tokens->tokens[tokens->nTokens].width++;
index++;
}
if (IS_DIGIT_ONE(format[index])) {
tokens->tokens[tokens->nTokens].token = format[index] - 1;
index++;
}
} else if (format[index] == (xmlChar)'A') {
tokens->tokens[tokens->nTokens].token = format[index];
index++;
} else if (format[index] == (xmlChar)'a') {
tokens->tokens[tokens->nTokens].token = format[index];
index++;
} else if (format[index] == (xmlChar)'I') {
tokens->tokens[tokens->nTokens].token = format[index];
index++;
} else if (format[index] == (xmlChar)'i') {
tokens->tokens[tokens->nTokens].token = format[index];
index++;
} else {
/* XSLT section 7.7
* "Any other format token indicates a numbering sequence
* that starts with that token. If an implementation does
* not support a numbering sequence that starts with that
* token, it must use a format token of 1."
*/
tokens->tokens[tokens->nTokens].token = (xmlChar)'0';
tokens->tokens[tokens->nTokens].width = 1;
}
/*
* Skip over remaining alphanumeric characters from the Nd
* (Number, decimal digit), Nl (Number, letter), No (Number,
* other), Lu (Letter, uppercase), Ll (Letter, lowercase), Lt
* (Letters, titlecase), Lm (Letters, modifiers), and Lo
* (Letters, other (uncased)) Unicode categories. This happens
* to correspond to the Letter and Digit classes from XML (and
* one wonders why XSLT doesn't refer to these instead).
*/
while (IS_LETTER(format[index]) || IS_DIGIT(format[index]))
index++;
/*
* Insert temporary non-alphanumeric final tooken.
*/
j = index;
while (! (IS_LETTER(format[index]) || IS_DIGIT(format[index]))) {
if (format[index] == 0)
break; /* while */
index++;
}
if (index > j)
tokens->end = xmlStrndup(&format[j], index - j);
}
}
static void
xsltNumberFormatInsertNumbers(xsltNumberDataPtr data,
double *numbers,
int numbers_max,
xsltFormatPtr tokens,
xmlBufferPtr buffer)
{
int i = 0;
double number;
xsltFormatTokenPtr token;
/*
* Handle initial non-alphanumeric token
*/
if (tokens->start != NULL)
xmlBufferCat(buffer, tokens->start);
for (i = 0; i < numbers_max; i++) {
/* Insert number */
number = numbers[(numbers_max - 1) - i];
if (i < tokens->nTokens) {
/* The "n"th format token will be used to format the "n"th
* number in the list */
token = &(tokens->tokens[i]);
} else if (tokens->nTokens > 0) {
/* If there are more numbers than format tokens, then the
* last format token will be used to format the remaining
* numbers. */
token = &(tokens->tokens[tokens->nTokens - 1]);
} else {
/* If there are no format tokens, then a format token of
* 1 is used to format all numbers. */
token = &default_token;
}
/* Print separator, except for the first number */
if (i > 0) {
if (token->separator != NULL)
xmlBufferCat(buffer, token->separator);
else
xmlBufferCCat(buffer, DEFAULT_SEPARATOR);
}
switch (xmlXPathIsInf(number)) {
case -1:
xmlBufferCCat(buffer, "-Infinity");
break;
case 1:
xmlBufferCCat(buffer, "Infinity");
break;
default:
if (xmlXPathIsNaN(number)) {
xmlBufferCCat(buffer, "NaN");
} else {
switch (token->token) {
case 'A':
xsltNumberFormatAlpha(buffer,
number,
TRUE);
break;
case 'a':
xsltNumberFormatAlpha(buffer,
number,
FALSE);
break;
case 'I':
xsltNumberFormatRoman(buffer,
number,
TRUE);
break;
case 'i':
xsltNumberFormatRoman(buffer,
number,
FALSE);
break;
default:
if (IS_DIGIT_ZERO(token->token)) {
xsltNumberFormatDecimal(buffer,
number,
token->token,
token->width,
data->digitsPerGroup,
data->groupingCharacter);
}
break;
}
}
}
}
/*
* Handle final non-alphanumeric token
*/
if (tokens->end != NULL)
xmlBufferCat(buffer, tokens->end);
}
static void
xsltNumberFormatInsertNumbers(xsltNumberDataPtr data,
double *numbers,
int numbers_max,
xsltFormatPtr tokens,
xmlBufferPtr buffer)
{
int i = 0;
double number;
xsltFormatTokenPtr token;
/*
* Handle initial non-alphanumeric token
*/
if (tokens->start != NULL)
xmlBufferCat(buffer, tokens->start);
for (i = 0; i < numbers_max; i++) {
/* Insert number */
number = numbers[(numbers_max - 1) - i];
/* Round to nearest like XSLT 2.0 */
number = floor(number + 0.5);
/*
* XSLT 1.0 isn't clear on how to handle negative numbers, but XSLT
* 2.0 says:
*
* It is a non-recoverable dynamic error if any undiscarded item
* in the atomized sequence supplied as the value of the value
* attribute of xsl:number cannot be converted to an integer, or
* if the resulting integer is less than 0 (zero).
*/
if (number < 0.0) {
xsltTransformError(NULL, NULL, NULL,
"xsl-number : negative value\n");
/* Recover by treating negative values as zero. */
number = 0.0;
}
if (i < tokens->nTokens) {
/*
* The "n"th format token will be used to format the "n"th
* number in the list
*/
token = &(tokens->tokens[i]);
} else if (tokens->nTokens > 0) {
/*
* If there are more numbers than format tokens, then the
* last format token will be used to format the remaining
* numbers.
*/
token = &(tokens->tokens[tokens->nTokens - 1]);
} else {
/*
* If there are no format tokens, then a format token of
* 1 is used to format all numbers.
*/
token = &default_token;
}
/* Print separator, except for the first number */
if (i > 0) {
if (token->separator != NULL)
xmlBufferCat(buffer, token->separator);
else
xmlBufferCCat(buffer, DEFAULT_SEPARATOR);
}
switch (xmlXPathIsInf(number)) {
case -1:
xmlBufferCCat(buffer, "-Infinity");
break;
case 1:
xmlBufferCCat(buffer, "Infinity");
break;
default:
if (xmlXPathIsNaN(number)) {
xmlBufferCCat(buffer, "NaN");
} else {
switch (token->token) {
case 'A':
xsltNumberFormatAlpha(data, buffer, number, TRUE);
break;
case 'a':
xsltNumberFormatAlpha(data, buffer, number, FALSE);
break;
case 'I':
xsltNumberFormatRoman(data, buffer, number, TRUE);
break;
case 'i':
xsltNumberFormatRoman(data, buffer, number, FALSE);
break;
default:
if (IS_DIGIT_ZERO(token->token)) {
xsltNumberFormatDecimal(buffer,
number,
token->token,
token->width,
data->digitsPerGroup,
data->groupingCharacter,
data->groupingCharacterLen);
}
break;
}
}
}
}
/*
* Handle final non-alphanumeric token
*/
if (tokens->end != NULL)
xmlBufferCat(buffer, tokens->end);
}
