/*
* PgArchiverMain
*
* The argc/argv parameters are valid only in EXEC_BACKEND case. However,
* since we don't use 'em, it hardly matters...
*/
NON_EXEC_STATIC void
PgArchiverMain(int argc, char *argv[])
{
IsUnderPostmaster = true; /* we are a postmaster subprocess now */
MyProcPid = getpid(); /* reset MyProcPid */
MyStartTime = time(NULL); /* record Start Time for logging */
/*
* If possible, make this process a group leader, so that the postmaster
* can signal any child processes too.
*/
#ifdef HAVE_SETSID
if (setsid() < 0)
elog(FATAL, "setsid() failed: %m");
#endif
InitializeLatchSupport(); /* needed for latch waits */
InitLatch(&mainloop_latch); /* initialize latch used in main loop */
/*
* Ignore all signals usually bound to some action in the postmaster,
* except for SIGHUP, SIGTERM, SIGUSR1, SIGUSR2, and SIGQUIT.
*/
pqsignal(SIGHUP, ArchSigHupHandler);
pqsignal(SIGINT, SIG_IGN);
pqsignal(SIGTERM, ArchSigTermHandler);
pqsignal(SIGQUIT, pgarch_exit);
pqsignal(SIGALRM, SIG_IGN);
pqsignal(SIGPIPE, SIG_IGN);
pqsignal(SIGUSR1, pgarch_waken);
pqsignal(SIGUSR2, pgarch_waken_stop);
pqsignal(SIGCHLD, SIG_DFL);
pqsignal(SIGTTIN, SIG_DFL);
pqsignal(SIGTTOU, SIG_DFL);
pqsignal(SIGCONT, SIG_DFL);
pqsignal(SIGWINCH, SIG_DFL);
PG_SETMASK(&UnBlockSig);
/*
* Identify myself via ps
*/
init_ps_display("archiver process", "", "", "");
pgarch_MainLoop();
exit(0);
}
/*
* Main entry point for syslogger process
* argc/argv parameters are valid only in EXEC_BACKEND case.
*/
NON_EXEC_STATIC void
SysLoggerMain(int argc, char *argv[])
{
#ifndef WIN32
char logbuffer[READ_BUF_SIZE];
int bytes_in_logbuffer = 0;
#endif
char *currentLogDir;
char *currentLogFilename;
int currentLogRotationAge;
pg_time_t now;
IsUnderPostmaster = true; /* we are a postmaster subprocess now */
MyProcPid = getpid(); /* reset MyProcPid */
MyStartTime = time(NULL); /* set our start time in case we call elog */
now = MyStartTime;
#ifdef EXEC_BACKEND
syslogger_parseArgs(argc, argv);
#endif /* EXEC_BACKEND */
am_syslogger = true;
init_ps_display("logger process", "", "", "");
/*
* If we restarted, our stderr is already redirected into our own input
* pipe. This is of course pretty useless, not to mention that it
* interferes with detecting pipe EOF. Point stderr to /dev/null. This
* assumes that all interesting messages generated in the syslogger will
* come through elog.c and will be sent to write_syslogger_file.
*/
if (redirection_done)
{
int fd = open(DEVNULL, O_WRONLY, 0);
/*
* The closes might look redundant, but they are not: we want to be
* darn sure the pipe gets closed even if the open failed. We can
* survive running with stderr pointing nowhere, but we can't afford
* to have extra pipe input descriptors hanging around.
*/
close(fileno(stdout));
close(fileno(stderr));
if (fd != -1)
{
dup2(fd, fileno(stdout));
dup2(fd, fileno(stderr));
close(fd);
}
}
/*
* Syslogger's own stderr can't be the syslogPipe, so set it back to text
* mode if we didn't just close it. (It was set to binary in
* SubPostmasterMain).
*/
#ifdef WIN32
else
_setmode(_fileno(stderr), _O_TEXT);
#endif
/*
* Also close our copy of the write end of the pipe. This is needed to
* ensure we can detect pipe EOF correctly. (But note that in the restart
* case, the postmaster already did this.)
*/
#ifndef WIN32
if (syslogPipe[1] >= 0)
close(syslogPipe[1]);
syslogPipe[1] = -1;
#else
if (syslogPipe[1])
CloseHandle(syslogPipe[1]);
syslogPipe[1] = 0;
#endif
/*
* If possible, make this process a group leader, so that the postmaster
* can signal any child processes too. (syslogger probably never has any
* child processes, but for consistency we make all postmaster child
* processes do this.)
*/
#ifdef HAVE_SETSID
if (setsid() < 0)
elog(FATAL, "setsid() failed: %m");
#endif
InitializeLatchSupport(); /* needed for latch waits */
/* Initialize private latch for use by signal handlers */
InitLatch(&sysLoggerLatch);
/*
* Properly accept or ignore signals the postmaster might send us
*
* Note: we ignore all termination signals, and instead exit only when all
* upstream processes are gone, to ensure we don't miss any dying gasps of
* broken backends...
*/
pqsignal(SIGHUP, sigHupHandler); /* set flag to read config file */
pqsignal(SIGINT, SIG_IGN);
pqsignal(SIGTERM, SIG_IGN);
pqsignal(SIGQUIT, SIG_IGN);
pqsignal(SIGALRM, SIG_IGN);
pqsignal(SIGPIPE, SIG_IGN);
pqsignal(SIGUSR1, sigUsr1Handler); /* request log rotation */
pqsignal(SIGUSR2, SIG_IGN);
/*
* Reset some signals that are accepted by postmaster but not here
*/
pqsignal(SIGCHLD, SIG_DFL);
pqsignal(SIGTTIN, SIG_DFL);
pqsignal(SIGTTOU, SIG_DFL);
pqsignal(SIGCONT, SIG_DFL);
pqsignal(SIGWINCH, SIG_DFL);
PG_SETMASK(&UnBlockSig);
#ifdef WIN32
/* Fire up separate data transfer thread */
InitializeCriticalSection(&sysloggerSection);
EnterCriticalSection(&sysloggerSection);
threadHandle = (HANDLE) _beginthreadex(NULL, 0, pipeThread, NULL, 0, NULL);
if (threadHandle == 0)
elog(FATAL, "could not create syslogger data transfer thread: %m");
#endif /* WIN32 */
/*
* Remember active logfile's name. We recompute this from the reference
* time because passing down just the pg_time_t is a lot cheaper than
* passing a whole file path in the EXEC_BACKEND case.
*/
last_file_name = logfile_getname(first_syslogger_file_time, NULL);
/* remember active logfile parameters */
currentLogDir = pstrdup(Log_directory);
currentLogFilename = pstrdup(Log_filename);
currentLogRotationAge = Log_RotationAge;
/* set next planned rotation time */
set_next_rotation_time();
/* main worker loop */
for (;;)
{
bool time_based_rotation = false;
int size_rotation_for = 0;
long cur_timeout;
int cur_flags;
#ifndef WIN32
int rc;
#endif
/* Clear any already-pending wakeups */
ResetLatch(&sysLoggerLatch);
/*
* Process any requests or signals received recently.
*/
if (got_SIGHUP)
{
got_SIGHUP = false;
ProcessConfigFile(PGC_SIGHUP);
/*
* Check if the log directory or filename pattern changed in
* postgresql.conf. If so, force rotation to make sure we're
* writing the logfiles in the right place.
*/
if (strcmp(Log_directory, currentLogDir) != 0)
{
pfree(currentLogDir);
currentLogDir = pstrdup(Log_directory);
rotation_requested = true;
/*
* Also, create new directory if not present; ignore errors
*/
mkdir(Log_directory, S_IRWXU);
}
if (strcmp(Log_filename, currentLogFilename) != 0)
{
pfree(currentLogFilename);
currentLogFilename = pstrdup(Log_filename);
rotation_requested = true;
}
/*
* If rotation time parameter changed, reset next rotation time,
* but don't immediately force a rotation.
*/
if (currentLogRotationAge != Log_RotationAge)
{
currentLogRotationAge = Log_RotationAge;
set_next_rotation_time();
}
/*
* If we had a rotation-disabling failure, re-enable rotation
* attempts after SIGHUP, and force one immediately.
*/
if (rotation_disabled)
{
rotation_disabled = false;
rotation_requested = true;
}
}
if (Log_RotationAge > 0 && !rotation_disabled)
{
/* Do a logfile rotation if it's time */
now = (pg_time_t) time(NULL);
if (now >= next_rotation_time)
rotation_requested = time_based_rotation = true;
}
if (!rotation_requested && Log_RotationSize > 0 && !rotation_disabled)
{
/* Do a rotation if file is too big */
if (ftell(syslogFile) >= Log_RotationSize * 1024L)
{
rotation_requested = true;
size_rotation_for |= LOG_DESTINATION_STDERR;
}
if (csvlogFile != NULL &&
ftell(csvlogFile) >= Log_RotationSize * 1024L)
{
rotation_requested = true;
size_rotation_for |= LOG_DESTINATION_CSVLOG;
}
}
if (rotation_requested)
{
/*
* Force rotation when both values are zero. It means the request
* was sent by pg_rotate_logfile.
*/
if (!time_based_rotation && size_rotation_for == 0)
size_rotation_for = LOG_DESTINATION_STDERR | LOG_DESTINATION_CSVLOG;
logfile_rotate(time_based_rotation, size_rotation_for);
}
/*
* Calculate time till next time-based rotation, so that we don't
* sleep longer than that. We assume the value of "now" obtained
* above is still close enough. Note we can't make this calculation
* until after calling logfile_rotate(), since it will advance
* next_rotation_time.
*
* Also note that we need to beware of overflow in calculation of the
* timeout: with large settings of Log_RotationAge, next_rotation_time
* could be more than INT_MAX msec in the future. In that case we'll
* wait no more than INT_MAX msec, and try again.
*/
if (Log_RotationAge > 0 && !rotation_disabled)
{
pg_time_t delay;
delay = next_rotation_time - now;
if (delay > 0)
{
if (delay > INT_MAX / 1000)
delay = INT_MAX / 1000;
cur_timeout = delay * 1000L; /* msec */
}
else
cur_timeout = 0;
cur_flags = WL_TIMEOUT;
}
else
{
cur_timeout = -1L;
cur_flags = 0;
}
/*
* Sleep until there's something to do
*/
#ifndef WIN32
rc = WaitLatchOrSocket(&sysLoggerLatch,
WL_LATCH_SET | WL_SOCKET_READABLE | cur_flags,
syslogPipe[0],
cur_timeout);
if (rc & WL_SOCKET_READABLE)
{
int bytesRead;
bytesRead = read(syslogPipe[0],
logbuffer + bytes_in_logbuffer,
sizeof(logbuffer) - bytes_in_logbuffer);
if (bytesRead < 0)
{
if (errno != EINTR)
ereport(LOG,
(errcode_for_socket_access(),
errmsg("could not read from logger pipe: %m")));
}
else if (bytesRead > 0)
{
bytes_in_logbuffer += bytesRead;
process_pipe_input(logbuffer, &bytes_in_logbuffer);
continue;
}
else
{
/*
* Zero bytes read when select() is saying read-ready means
* EOF on the pipe: that is, there are no longer any processes
* with the pipe write end open. Therefore, the postmaster
* and all backends are shut down, and we are done.
*/
pipe_eof_seen = true;
/* if there's any data left then force it out now */
flush_pipe_input(logbuffer, &bytes_in_logbuffer);
}
}
#else /* WIN32 */
/*
* On Windows we leave it to a separate thread to transfer data and
* detect pipe EOF. The main thread just wakes up to handle SIGHUP
* and rotation conditions.
*
* Server code isn't generally thread-safe, so we ensure that only one
* of the threads is active at a time by entering the critical section
* whenever we're not sleeping.
*/
LeaveCriticalSection(&sysloggerSection);
(void) WaitLatch(&sysLoggerLatch,
WL_LATCH_SET | cur_flags,
cur_timeout);
EnterCriticalSection(&sysloggerSection);
#endif /* WIN32 */
if (pipe_eof_seen)
{
/*
* seeing this message on the real stderr is annoying - so we make
* it DEBUG1 to suppress in normal use.
*/
ereport(DEBUG1,
(errmsg("logger shutting down")));
/*
* Normal exit from the syslogger is here. Note that we
* deliberately do not close syslogFile before exiting; this is to
* allow for the possibility of elog messages being generated
* inside proc_exit. Regular exit() will take care of flushing
* and closing stdio channels.
*/
proc_exit(0);
}
}
}
/*
* InitAuxiliaryProcess -- create a per-auxiliary-process data structure
*
* This is called by bgwriter and similar processes so that they will have a
* MyProc value that's real enough to let them wait for LWLocks. The PGPROC
* and sema that are assigned are one of the extra ones created during
* InitProcGlobal.
*
* Auxiliary processes are presently not expected to wait for real (lockmgr)
* locks, so we need not set up the deadlock checker. They are never added
* to the ProcArray or the sinval messaging mechanism, either. They also
* don't get a VXID assigned, since this is only useful when we actually
* hold lockmgr locks.
*
* Startup process however uses locks but never waits for them in the
* normal backend sense. Startup process also takes part in sinval messaging
* as a sendOnly process, so never reads messages from sinval queue. So
* Startup process does have a VXID and does show up in pg_locks.
*/
void
InitAuxiliaryProcess(void)
{
PGPROC *auxproc;
int proctype;
/*
* ProcGlobal should be set up already (if we are a backend, we inherit
* this by fork() or EXEC_BACKEND mechanism from the postmaster).
*/
if (ProcGlobal == NULL || AuxiliaryProcs == NULL)
elog(PANIC, "proc header uninitialized");
if (MyProc != NULL)
elog(ERROR, "you already exist");
/*
* Initialize process-local latch support. This could fail if the kernel
* is low on resources, and if so we want to exit cleanly before acquiring
* any shared-memory resources.
*/
InitializeLatchSupport();
/*
* We use the ProcStructLock to protect assignment and releasing of
* AuxiliaryProcs entries.
*
* While we are holding the ProcStructLock, also copy the current shared
* estimate of spins_per_delay to local storage.
*/
SpinLockAcquire(ProcStructLock);
set_spins_per_delay(ProcGlobal->spins_per_delay);
/*
* Find a free auxproc ... *big* trouble if there isn't one ...
*/
for (proctype = 0; proctype < NUM_AUXILIARY_PROCS; proctype++)
{
auxproc = &AuxiliaryProcs[proctype];
if (auxproc->pid == 0)
break;
}
if (proctype >= NUM_AUXILIARY_PROCS)
{
SpinLockRelease(ProcStructLock);
elog(FATAL, "all AuxiliaryProcs are in use");
}
/* Mark auxiliary proc as in use by me */
/* use volatile pointer to prevent code rearrangement */
((volatile PGPROC *) auxproc)->pid = MyProcPid;
MyProc = auxproc;
MyPgXact = &ProcGlobal->allPgXact[auxproc->pgprocno];
SpinLockRelease(ProcStructLock);
/*
* Initialize all fields of MyProc, except for those previously
* initialized by InitProcGlobal.
*/
SHMQueueElemInit(&(MyProc->links));
MyProc->waitStatus = STATUS_OK;
MyProc->lxid = InvalidLocalTransactionId;
MyProc->fpVXIDLock = false;
MyProc->fpLocalTransactionId = InvalidLocalTransactionId;
MyPgXact->xid = InvalidTransactionId;
MyPgXact->xmin = InvalidTransactionId;
MyProc->backendId = InvalidBackendId;
MyProc->databaseId = InvalidOid;
MyProc->roleId = InvalidOid;
MyPgXact->delayChkpt = false;
MyPgXact->vacuumFlags = 0;
MyProc->lwWaiting = false;
MyProc->lwWaitMode = 0;
MyProc->lwWaitLink = NULL;
MyProc->waitLock = NULL;
MyProc->waitProcLock = NULL;
#ifdef USE_ASSERT_CHECKING
if (assert_enabled)
{
int i;
/* Last process should have released all locks. */
for (i = 0; i < NUM_LOCK_PARTITIONS; i++)
Assert(SHMQueueEmpty(&(MyProc->myProcLocks[i])));
}
#endif
/*
* Acquire ownership of the PGPROC's latch, so that we can use WaitLatch.
* Note that there's no particular need to do ResetLatch here.
*/
OwnLatch(&MyProc->procLatch);
/*
* We might be reusing a semaphore that belonged to a failed process. So
* be careful and reinitialize its value here. (This is not strictly
* necessary anymore, but seems like a good idea for cleanliness.)
*/
PGSemaphoreReset(&MyProc->sem);
/*
* Arrange to clean up at process exit.
*/
on_shmem_exit(AuxiliaryProcKill, Int32GetDatum(proctype));
}
/*
* InitProcess -- initialize a per-process data structure for this backend
*/
void
InitProcess(void)
{
/* use volatile pointer to prevent code rearrangement */
volatile PROC_HDR *procglobal = ProcGlobal;
/*
* ProcGlobal should be set up already (if we are a backend, we inherit
* this by fork() or EXEC_BACKEND mechanism from the postmaster).
*/
if (procglobal == NULL)
elog(PANIC, "proc header uninitialized");
if (MyProc != NULL)
elog(ERROR, "you already exist");
/*
* Initialize process-local latch support. This could fail if the kernel
* is low on resources, and if so we want to exit cleanly before acquiring
* any shared-memory resources.
*/
InitializeLatchSupport();
/*
* Try to get a proc struct from the free list. If this fails, we must be
* out of PGPROC structures (not to mention semaphores).
*
* While we are holding the ProcStructLock, also copy the current shared
* estimate of spins_per_delay to local storage.
*/
SpinLockAcquire(ProcStructLock);
set_spins_per_delay(procglobal->spins_per_delay);
if (IsAnyAutoVacuumProcess())
MyProc = procglobal->autovacFreeProcs;
else if (IsBackgroundWorker)
MyProc = procglobal->bgworkerFreeProcs;
else
MyProc = procglobal->freeProcs;
if (MyProc != NULL)
{
if (IsAnyAutoVacuumProcess())
procglobal->autovacFreeProcs = (PGPROC *) MyProc->links.next;
else if (IsBackgroundWorker)
procglobal->bgworkerFreeProcs = (PGPROC *) MyProc->links.next;
else
procglobal->freeProcs = (PGPROC *) MyProc->links.next;
SpinLockRelease(ProcStructLock);
}
else
{
/*
* If we reach here, all the PGPROCs are in use. This is one of the
* possible places to detect "too many backends", so give the standard
* error message. XXX do we need to give a different failure message
* in the autovacuum case?
*/
SpinLockRelease(ProcStructLock);
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("sorry, too many clients already")));
}
MyPgXact = &ProcGlobal->allPgXact[MyProc->pgprocno];
/*
* Now that we have a PGPROC, mark ourselves as an active postmaster
* child; this is so that the postmaster can detect it if we exit without
* cleaning up. (XXX autovac launcher currently doesn't participate in
* this; it probably should.)
*/
if (IsUnderPostmaster && !IsAutoVacuumLauncherProcess())
MarkPostmasterChildActive();
/*
* Initialize all fields of MyProc, except for those previously
* initialized by InitProcGlobal.
*/
SHMQueueElemInit(&(MyProc->links));
MyProc->waitStatus = STATUS_OK;
MyProc->lxid = InvalidLocalTransactionId;
MyProc->fpVXIDLock = false;
MyProc->fpLocalTransactionId = InvalidLocalTransactionId;
MyPgXact->xid = InvalidTransactionId;
MyPgXact->xmin = InvalidTransactionId;
MyProc->pid = MyProcPid;
/* backendId, databaseId and roleId will be filled in later */
MyProc->backendId = InvalidBackendId;
MyProc->databaseId = InvalidOid;
MyProc->roleId = InvalidOid;
MyPgXact->delayChkpt = false;
MyPgXact->vacuumFlags = 0;
/* NB -- autovac launcher intentionally does not set IS_AUTOVACUUM */
if (IsAutoVacuumWorkerProcess())
MyPgXact->vacuumFlags |= PROC_IS_AUTOVACUUM;
MyProc->lwWaiting = false;
MyProc->lwWaitMode = 0;
MyProc->lwWaitLink = NULL;
MyProc->waitLock = NULL;
MyProc->waitProcLock = NULL;
#ifdef USE_ASSERT_CHECKING
if (assert_enabled)
{
int i;
/* Last process should have released all locks. */
for (i = 0; i < NUM_LOCK_PARTITIONS; i++)
Assert(SHMQueueEmpty(&(MyProc->myProcLocks[i])));
}
#endif
MyProc->recoveryConflictPending = false;
/* Initialize fields for sync rep */
MyProc->waitLSN = 0;
MyProc->syncRepState = SYNC_REP_NOT_WAITING;
SHMQueueElemInit(&(MyProc->syncRepLinks));
/*
* Acquire ownership of the PGPROC's latch, so that we can use WaitLatch.
* Note that there's no particular need to do ResetLatch here.
*/
OwnLatch(&MyProc->procLatch);
/*
* We might be reusing a semaphore that belonged to a failed process. So
* be careful and reinitialize its value here. (This is not strictly
* necessary anymore, but seems like a good idea for cleanliness.)
*/
PGSemaphoreReset(&MyProc->sem);
/*
* Arrange to clean up at backend exit.
*/
on_shmem_exit(ProcKill, 0);
/*
* Now that we have a PGPROC, we could try to acquire locks, so initialize
* the deadlock checker.
*/
InitDeadLockChecking();
}
