gssize
(g_atomic_pointer_add) (volatile void *atomic,
gssize val)
{
#if GLIB_SIZEOF_VOID_P == 8
return InterlockedExchangeAdd64 (atomic, val);
#else
return InterlockedExchangeAdd (atomic, val);
#endif
}
__host__ __device__
typename enable_if<
sizeof(Integer64) == 8,
Integer64
>::type
atomic_fetch_sub(Integer64 *x, Integer64 y)
{
#if defined(__CUDA_ARCH__)
return atomicSub(x, y);
#elif defined(__GNUC__)
return __atomic_fetch_sub(x, y, __ATOMIC_SEQ_CST);
#elif defined(_MSC_VER)
return InterlockedExchangeAdd64(x, -y);
#elif defined(__clang__)
return __c11_atomic_fetch_sub(x, y)
#else
#error "No atomic_fetch_sub implementation."
#endif
}
VOID KphUnlockHandleTableEntry(
__in PHANDLE_TABLE HandleTable,
__in PHANDLE_TABLE_ENTRY HandleTableEntry
)
{
PEX_PUSH_LOCK handleContentionEvent;
PAGED_CODE();
// Set the unlocked bit.
#ifdef _M_X64
InterlockedExchangeAdd64(&HandleTableEntry->Value, 1);
#else
InterlockedExchangeAdd(&HandleTableEntry->Value, 1);
#endif
// Allow waiters to wake up.
handleContentionEvent = (PEX_PUSH_LOCK)((ULONG_PTR)HandleTable + KphDynHtHandleContentionEvent);
if (*(PULONG_PTR)handleContentionEvent != 0)
ExfUnblockPushLock(handleContentionEvent, NULL);
}
int64_t ExchAdd64(volatile int64_t *i, int64_t a)
{
return (int64_t)InterlockedExchangeAdd64((volatile LONG64 *)i, a);
}
//---------------------------------------------------------------------------
int64_t interlockedIncrement(volatile int64_t & v,int64_t a)
{
return InterlockedExchangeAdd64((LONGLONG *) &v,a);
}
static void segment_allocate_add(mempool p, uint64 count)
{
// Required Memory:
// sz( segment )
// count * sz( real_node_size )
//
// where real node size is:
// ALIGN_TO_16( sz( node ) ) + p->elem_size
// so the nodes usable address is nodebase + ALIGN_TO_16(sz(node))
//
size_t total_sz;
struct pool_segment *seg = NULL;
struct node *nodeList = NULL;
struct node *node = NULL;
char *ptr = NULL;
uint64 i;
total_sz = ALIGN_TO_16(sizeof(struct pool_segment))
+ ((size_t)count * (sizeof(struct node) + (size_t)p->elem_size)) ;
#ifdef MEMPOOL_DEBUG
ShowDebug(read_message("Source.common.mempool_debug"), p->name, count, (float)total_sz/1024.f/1024.f);
#endif
// allocate! (spin forever until weve got the memory.)
i=0;
while(1) {
ptr = (char *)aMalloc(total_sz);
if(ptr != NULL) break;
i++; // increase failcount.
if(!(i & 7)) {
ShowWarning(read_message("Source.common.mempool_debug2"), (float)total_sz/1024.f/1024.f, i);
#ifdef WIN32
Sleep(1000);
#else
sleep(1);
#endif
} else {
rathread_yield(); /// allow/force vuln. ctxswitch
}
}//endwhile: allocation spinloop.
// Clear Memory.
memset(ptr, 0x00, total_sz);
// Initialize segment struct.
seg = (struct pool_segment *)ptr;
ptr += ALIGN_TO_16(sizeof(struct pool_segment));
seg->pool = p;
seg->num_nodes_total = count;
seg->num_bytes = total_sz;
// Initialze nodes!
nodeList = NULL;
for(i = 0; i < count; i++) {
node = (struct node *)ptr;
ptr += sizeof(struct node);
ptr += p->elem_size;
node->segment = seg;
#ifdef MEMPOOLASSERT
node->used = false;
node->magic = NODE_MAGIC;
#endif
if(p->onalloc != NULL) p->onalloc(NODE_TO_DATA(node));
node->next = nodeList;
nodeList = node;
}
// Link in Segment.
EnterSpinLock(&p->segmentLock);
seg->next = p->segments;
p->segments = seg;
LeaveSpinLock(&p->segmentLock);
// Link in Nodes
EnterSpinLock(&p->nodeLock);
nodeList->next = p->free_list;
p->free_list = nodeList;
LeaveSpinLock(&p->nodeLock);
// Increase Stats:
InterlockedExchangeAdd64(&p->num_nodes_total, count);
InterlockedExchangeAdd64(&p->num_nodes_free, count);
InterlockedIncrement64(&p->num_segments);
InterlockedExchangeAdd64(&p->num_bytes_total, total_sz);
}//end: segment_allocate_add()
NTSTATUS
AIMWrFltrWrite(IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp)
{
PDEVICE_EXTENSION device_extension = (PDEVICE_EXTENSION)DeviceObject->DeviceExtension;
PIO_STACK_LOCATION io_stack = IoGetCurrentIrpStackLocation(Irp);
NTSTATUS status;
if (!device_extension->Statistics.IsProtected)
{
return AIMWrFltrSendToNextDriver(DeviceObject, Irp);
}
if (!device_extension->Statistics.Initialized)
{
status = AIMWrFltrInitializeDiffDevice(device_extension);
if (!NT_SUCCESS(status))
{
status = STATUS_MEDIA_WRITE_PROTECTED;
Irp->IoStatus.Information = 0;
Irp->IoStatus.Status = status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return status;
}
}
InterlockedIncrement64(&device_extension->Statistics.WriteRequests);
if (io_stack->Parameters.Write.Length == 0)
{
// Turn a zero-byte write request into a read request to take
// advantage of just bound checks etc by target device driver
IoGetNextIrpStackLocation(Irp)->MajorFunction = IRP_MJ_READ;
return AIMWrFltrSendToNextDriver(DeviceObject, Irp);
}
InterlockedExchangeAdd64(&device_extension->Statistics.WrittenBytes,
io_stack->Parameters.Write.Length);
LONGLONG highest_byte =
io_stack->Parameters.Write.ByteOffset.QuadPart +
io_stack->Parameters.Write.Length;
if ((io_stack->Parameters.Write.ByteOffset.QuadPart >=
device_extension->Statistics.DiffDeviceVbr.Fields.Head.Size.QuadPart) ||
(highest_byte <= 0) ||
(highest_byte > device_extension->Statistics.DiffDeviceVbr.Fields.Head.Size.QuadPart))
{
Irp->IoStatus.Status = STATUS_END_OF_MEDIA;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
KdBreakPoint();
return STATUS_END_OF_MEDIA;
}
if (io_stack->Parameters.Write.Length >
device_extension->Statistics.LargestWriteSize)
{
device_extension->Statistics.LargestWriteSize =
io_stack->Parameters.Write.Length;
KdPrint(("AIMWrFltrWrite: Largest write size is now %u KB\n",
device_extension->Statistics.LargestWriteSize >> 10));
}
DECLSPEC_NOINLINE
PKAFFINITY
KiIpiSendRequest (
IN KAFFINITY TargetSet,
IN ULONG64 Parameter,
IN ULONG64 Count,
IN ULONG64 RequestType
)
/*++
Routine Description:
This routine executes the specified immediate request on the specified
set of processors.
N.B. This function MUST be called from a non-context switchable state.
Arguments:
TargetProcessors - Supplies the set of processors on which the specfied
operation is to be executed.
Parameter - Supplies the parameter data that will be packed into the
request summary.
Count - Supplies the count data that will be packed into the request summary.
RequestType - Supplies the type of immediate request.
Return Value:
The address of the appropriate request barrier is returned as the function
value.
--*/
{
#if !defined(NT_UP)
PKAFFINITY Barrier;
PKPRCB Destination;
ULONG Number;
KAFFINITY PacketTargetSet;
PKPRCB Prcb;
ULONG Processor;
PREQUEST_MAILBOX RequestMailbox;
KAFFINITY SetMember;
PVOID *Start;
KAFFINITY SummarySet;
KAFFINITY TargetMember;
REQUEST_SUMMARY Template;
PVOID *Virtual;
ASSERT(KeGetCurrentIrql() >= DISPATCH_LEVEL);
//
// Initialize request template.
//
Prcb = KeGetCurrentPrcb();
Template.Summary = 0;
Template.IpiRequest = RequestType;
Template.Count = Count;
Template.Parameter = Parameter;
//
// If the target set contains one and only one processor, then use the
// target set for signal done synchronization. Otherwise, use packet
// barrier for signal done synchronization.
//
Prcb->TargetSet = TargetSet;
if ((TargetSet & (TargetSet - 1)) == 0) {
Template.IpiSynchType = TRUE;
Barrier = (PKAFFINITY)&Prcb->TargetSet;
} else {
Prcb->PacketBarrier = 1;
Barrier = (PKAFFINITY)&Prcb->PacketBarrier;
}
//
// Loop through the target set of processors and set the request summary.
// If a target processor is already processing a request, then remove
// that processor from the target set of processor that will be sent an
// interprocessor interrupt.
//
// N.B. It is guaranteed that there is at least one bit set in the target
// set.
//
Number = Prcb->Number;
SetMember = Prcb->SetMember;
SummarySet = TargetSet;
PacketTargetSet = TargetSet;
BitScanForward64(&Processor, SummarySet);
do {
Destination = KiProcessorBlock[Processor];
PrefetchForWrite(&Destination->SenderSummary);
RequestMailbox = &Destination->RequestMailbox[Number];
PrefetchForWrite(RequestMailbox);
TargetMember = AFFINITY_MASK(Processor);
//
// Make sure that processing of the last IPI is complete before sending
// another IPI to the same processor.
//
while ((Destination->SenderSummary & SetMember) != 0) {
KeYieldProcessor();
}
//
// If the request type is flush multiple and the flush entries will
// fit in the mailbox, then copy the virtual address array to the
// destination mailbox and change the request type to flush immediate.
//
// If the request type is packet ready, then copy the packet to the
// destination mailbox.
//
if (RequestType == IPI_FLUSH_MULTIPLE) {
Virtual = &RequestMailbox->Virtual[0];
Start = (PVOID *)Parameter;
switch (Count) {
//
// Copy of up to seven virtual addresses and a conversion of
// the request type to flush multiple immediate.
//
case 7:
Virtual[6] = Start[6];
case 6:
Virtual[5] = Start[5];
case 5:
Virtual[4] = Start[4];
case 4:
Virtual[3] = Start[3];
case 3:
Virtual[2] = Start[2];
case 2:
Virtual[1] = Start[1];
case 1:
Virtual[0] = Start[0];
Template.IpiRequest = IPI_FLUSH_MULTIPLE_IMMEDIATE;
break;
}
} else if (RequestType == IPI_PACKET_READY) {
RequestMailbox->RequestPacket = *(PKREQUEST_PACKET)Parameter;
}
RequestMailbox->RequestSummary = Template.Summary;
if (InterlockedExchangeAdd64((LONG64 volatile *)&Destination->SenderSummary,
SetMember) != 0) {
TargetSet ^= TargetMember;
}
SummarySet ^= TargetMember;
} while (BitScanForward64(&Processor, SummarySet) != FALSE);
//
// Request interprocessor interrupts on the remaining target set of
// processors.
//
//
// N.B. For packet sends, there exists a potential deadlock situation
// unless an IPI is sent to the original set of target processors.
// The deadlock arises from the fact that the targets will spin in
// their IPI routines.
//
if (RequestType == IPI_PACKET_READY) {
TargetSet = PacketTargetSet;
}
if (TargetSet != 0) {
HalRequestIpi(TargetSet);
}
return Barrier;
#else
UNREFERENCED_PARAMETER(TargetSet);
UNREFERENCED_PARAMETER(Parameter);
UNREFERENCED_PARAMETER(Count);
UNREFERENCED_PARAMETER(RequestType);
return NULL;
#endif
}
DECLSPEC_NOINLINE
VOID
KiIpiProcessRequests (
VOID
)
/*++
Routine Description:
This routine processes interprocessor requests and returns a summary
of the requests that were processed.
Arguments:
None.
Return Value:
None.
--*/
{
#if !defined(NT_UP)
PVOID *End;
ULONG64 Number;
PKPRCB Packet;
PKPRCB Prcb;
ULONG Processor;
REQUEST_SUMMARY Request;
PREQUEST_MAILBOX RequestMailbox;
PKREQUEST_PACKET RequestPacket;
LONG64 SetMember;
PKPRCB Source;
KAFFINITY SummarySet;
KAFFINITY TargetSet;
PVOID *Virtual;
//
// Loop until the sender summary is zero.
//
Prcb = KeGetCurrentPrcb();
TargetSet = ReadForWriteAccess(&Prcb->SenderSummary);
SetMember = Prcb->SetMember;
while (TargetSet != 0) {
SummarySet = TargetSet;
BitScanForward64(&Processor, SummarySet);
do {
Source = KiProcessorBlock[Processor];
RequestMailbox = &Prcb->RequestMailbox[Processor];
Request.Summary = RequestMailbox->RequestSummary;
//
// If the request type is flush multiple immediate, flush process,
// flush single, or flush all, then packet done can be signaled
// before processing the request. Otherwise, the request type must
// be a packet request, a cache invalidate, or a flush multiple
//
if (Request.IpiRequest <= IPI_FLUSH_ALL) {
//
// If the synchronization type is target set, then the IPI was
// only between two processors and target set should be used
// for synchronization. Otherwise, packet barrier is used for
// synchronization.
//
if (Request.IpiSynchType == 0) {
if (SetMember == InterlockedXor64((PLONG64)&Source->TargetSet,
SetMember)) {
Source->PacketBarrier = 0;
}
} else {
Source->TargetSet = 0;
}
if (Request.IpiRequest == IPI_FLUSH_MULTIPLE_IMMEDIATE) {
Number = Request.Count;
Virtual = &RequestMailbox->Virtual[0];
End = Virtual + Number;
do {
KiFlushSingleTb(*Virtual);
Virtual += 1;
} while (Virtual < End);
} else if (Request.IpiRequest == IPI_FLUSH_PROCESS) {
KiFlushProcessTb();
} else if (Request.IpiRequest == IPI_FLUSH_SINGLE) {
KiFlushSingleTb((PVOID)Request.Parameter);
} else {
ASSERT(Request.IpiRequest == IPI_FLUSH_ALL);
KeFlushCurrentTb();
}
} else {
//
// If the request type is packet ready, then call the worker
// function. Otherwise, the request must be either a flush
// multiple or a cache invalidate.
//
if (Request.IpiRequest == IPI_PACKET_READY) {
Packet = Source;
if (Request.IpiSynchType != 0) {
Packet = (PKPRCB)((ULONG64)Source + 1);
}
RequestPacket = (PKREQUEST_PACKET)&RequestMailbox->RequestPacket;
(RequestPacket->WorkerRoutine)((PKIPI_CONTEXT)Packet,
RequestPacket->CurrentPacket[0],
RequestPacket->CurrentPacket[1],
RequestPacket->CurrentPacket[2]);
} else {
if (Request.IpiRequest == IPI_FLUSH_MULTIPLE) {
Number = Request.Count;
Virtual = (PVOID *)Request.Parameter;
End = Virtual + Number;
do {
KiFlushSingleTb(*Virtual);
Virtual += 1;
} while (Virtual < End);
} else if (Request.IpiRequest == IPI_INVALIDATE_ALL) {
WritebackInvalidate();
} else {
ASSERT(FALSE);
}
//
// If the synchronization type is target set, then the IPI was
// only between two processors and target set should be used
// for synchronization. Otherwise, packet barrier is used for
// synchronization.
//
if (Request.IpiSynchType == 0) {
if (SetMember == InterlockedXor64((PLONG64)&Source->TargetSet,
SetMember)) {
Source->PacketBarrier = 0;
}
} else {
Source->TargetSet = 0;
}
}
}
SummarySet ^= AFFINITY_MASK(Processor);
} while (BitScanForward64(&Processor, SummarySet) != FALSE);
//
// Clear target set in sender summary.
//
TargetSet =
InterlockedExchangeAdd64((LONG64 volatile *)&Prcb->SenderSummary,
-(LONG64)TargetSet) - TargetSet;
}
#endif
return;
}
_ALWAYS_INLINE_ uint64_t _atomic_sub_impl(register uint64_t *pw, register uint64_t val) {
return InterlockedExchangeAdd64((LONGLONG volatile *)pw, -(int64_t)val) - val;
}
intptr_t atom_add(volatile intptr_t *dest, intptr_t incr)
{
return InterlockedExchangeAdd64((LONGLONG *)dest, incr) + incr;
}
static inline Type fetch_add(volatile Type& storage, Type value) {
return static_cast<Type>(InterlockedExchangeAdd64((__int64*)&storage, (__int64)value));
}
template<typename T> static T add(volatile T*scalar, T other) {
return other + (T)InterlockedExchangeAdd64((volatile LONGLONG*)scalar,(LONGLONG) other);
}
