void PCB_DRAW_PANEL_GAL::setDefaultLayerDeps()
{
for( LAYER_NUM i = 0; (unsigned) i < sizeof( GAL_LAYER_ORDER ) / sizeof( LAYER_NUM ); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( layer );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( ANCHOR_VISIBLE ) );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
// Front modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_CrtYd, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( F_Fab, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
// Back modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_CrtYd, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( B_Fab, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( RATSNEST_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( WORKSHEET ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GRID_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( DRC_VISIBLE ) );
}
PCB_DRAW_PANEL_GAL::PCB_DRAW_PANEL_GAL( wxWindow* aParentWindow, wxWindowID aWindowId,
const wxPoint& aPosition, const wxSize& aSize,
GalType aGalType ) :
EDA_DRAW_PANEL_GAL( aParentWindow, aWindowId, aPosition, aSize, aGalType )
{
m_worksheet = NULL;
m_ratsnest = NULL;
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
m_view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Load display options (such as filled/outline display of items)
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( DisplayOpt );
}
unsigned int TRACK::ViewGetLOD( int aLayer ) const
{
// Netnames will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
return ( 20000000 / ( m_Width + 1 ) );
}
// Other layers are shown without any conditions
return 0;
}
unsigned int D_PAD::ViewGetLOD( int aLayer ) const
{
// Netnames and soldermasks will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
return ( 100000000 / std::max( m_Size.x, m_Size.y ) );
}
// Other layers are shown without any conditions
return 0;
}
unsigned int D_PAD::ViewGetLOD( int aLayer ) const
{
// Netnames will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
// Pad sizes can be zero briefly when someone is typing a number like "0.5" in the pad properties dialog.
// Fail gracefully if this happens.
if( ( m_Size.x == 0 ) && ( m_Size.y == 0 ) )
return UINT_MAX;
return ( 100000000 / std::max( m_Size.x, m_Size.y ) );
}
// Other layers are shown without any conditions
return 0;
}
unsigned int TRACK::ViewGetLOD( int aLayer, KIGFX::VIEW* aView ) const
{
const int HIDE = std::numeric_limits<unsigned int>::max();
if( !aView->IsLayerVisible( LAYER_TRACKS ) )
return HIDE;
// Netnames will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
return ( 40000000 / ( m_Width + 1 ) );
}
// Other layers are shown without any conditions
return 0;
}
unsigned int D_PAD::ViewGetLOD( int aLayer, KIGFX::VIEW* aView ) const
{
if( aView->GetPrintMode() > 0 ) // In printing mode the pad is always drawable
return 0;
const int HIDE = std::numeric_limits<unsigned int>::max();
BOARD* board = GetBoard();
// Handle Render tab switches
if( ( GetAttribute() == PAD_ATTRIB_STANDARD || GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
&& !aView->IsLayerVisible( LAYER_PADS_TH ) )
return HIDE;
if( !IsFlipped() && !aView->IsLayerVisible( LAYER_MOD_FR ) )
return HIDE;
if( IsFlipped() && !aView->IsLayerVisible( LAYER_MOD_BK ) )
return HIDE;
if( IsFrontLayer( ( PCB_LAYER_ID )aLayer ) && !aView->IsLayerVisible( LAYER_PAD_FR ) )
return HIDE;
if( IsBackLayer( ( PCB_LAYER_ID )aLayer ) && !aView->IsLayerVisible( LAYER_PAD_BK ) )
return HIDE;
// Only draw the pad if at least one of the layers it crosses is being displayed
if( board && !( board->GetVisibleLayers() & GetLayerSet() ).any() )
return HIDE;
// Netnames will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
int divisor = std::max( m_Size.x, m_Size.y );
// Pad sizes can be zero briefly when someone is typing a number like "0.5"
// in the pad properties dialog
if( divisor == 0 )
return HIDE;
return ( Millimeter2iu( 10 ) / divisor );
}
// Other layers are shown without any conditions
return 0;
}
unsigned int D_PAD::ViewGetLOD( int aLayer, KIGFX::VIEW* aView ) const
{
// Netnames will be shown only if zoom is appropriate
if( IsNetnameLayer( aLayer ) )
{
int divisor = std::max( m_Size.x, m_Size.y );
// Pad sizes can be zero briefly when someone is typing a number like "0.5"
// in the pad properties dialog
if( divisor == 0 )
return UINT_MAX;
return ( Millimeter2iu( 100 ) / divisor );
}
// Other layers are shown without any conditions
return 0;
}
void PCB_BASE_FRAME::LoadSettings()
{
wxASSERT( wxGetApp().GetSettings() != NULL );
wxConfig* cfg = wxGetApp().GetSettings();
EDA_DRAW_FRAME::LoadSettings();
// Ensure grid id is an existent grid id:
if( (m_LastGridSizeId <= 0) ||
(m_LastGridSizeId > (ID_POPUP_GRID_USER - ID_POPUP_GRID_LEVEL_1000)) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
cfg->Read( m_FrameName + UserGridSizeXEntry, &m_UserGridSize.x, 0.01 );
cfg->Read( m_FrameName + UserGridSizeYEntry, &m_UserGridSize.y, 0.01 );
long itmp;
cfg->Read( m_FrameName + UserGridUnitsEntry, &itmp, ( long )INCHES );
m_UserGridUnit = (EDA_UNITS_T) itmp;
cfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayPadFill, true );
cfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayViaFill, true );
cfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayPadNum, true );
cfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayModEdge, ( long )FILLED );
cfg->Read( m_FrameName + FastGrid1Entry, &itmp, ( long )0);
m_FastGrid1 = itmp;
cfg->Read( m_FrameName + FastGrid2Entry, &itmp, ( long )0);
m_FastGrid2 = itmp;
if( m_DisplayModEdge < LINE || m_DisplayModEdge > SKETCH )
m_DisplayModEdge = FILLED;
cfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayModText, ( long )FILLED );
if( m_DisplayModText < LINE || m_DisplayModText > SKETCH )
m_DisplayModText = FILLED;
// Apply display settings for GAL
KIGFX::VIEW* view = GetGalCanvas()->GetView();
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
view->SetRequired( GetNetnameLayer( layer ), layer );
view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
}
}
// Some more required layers settings
view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIAS_VISIBLE ) );
view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( ADHESIVE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( ADHESIVE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Apply layer coloring scheme & display options
if( view->GetPainter() )
{
KIGFX::PCB_RENDER_SETTINGS* settings = new KIGFX::PCB_RENDER_SETTINGS();
// Load layers' colors from PCB data
settings->ImportLegacyColors( m_Pcb->GetColorsSettings() );
view->GetPainter()->ApplySettings( settings );
// Load display options (such as filled/outline display of items)
settings->LoadDisplayOptions( DisplayOpt );
}
// WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" )
// when reading doubles in config,
// but forget to back to current locale. So we call SetLocaleTo_Default
SetLocaleTo_Default( );
}
PCB_DRAW_PANEL_GAL::PCB_DRAW_PANEL_GAL( wxWindow* aParentWindow, wxWindowID aWindowId,
const wxPoint& aPosition, const wxSize& aSize,
GalType aGalType ) :
EDA_DRAW_PANEL_GAL( aParentWindow, aWindowId, aPosition, aSize, aGalType )
{
m_worksheet = NULL;
m_ratsnest = NULL;
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
m_view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
m_view->SetRequired( GetNetnameLayer( layer ), layer );
m_view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
m_view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( layer );
}
}
m_view->SetLayerTarget( ITEM_GAL_LAYER( ANCHOR_VISIBLE ), KIGFX::TARGET_NONCACHED );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( ANCHOR_VISIBLE ) );
// Some more required layers settings
m_view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIA_THROUGH_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
// Front modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_FR_VISIBLE ), ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Adhes, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Paste, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_Mask, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
m_view->SetRequired( F_CrtYd, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
m_view->SetRequired( F_Fab, ITEM_GAL_LAYER( MOD_FR_VISIBLE ) );
// Back modules
m_view->SetRequired( ITEM_GAL_LAYER( PAD_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( ITEM_GAL_LAYER( MOD_TEXT_BK_VISIBLE ), ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Adhes, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Paste, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_Mask, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
m_view->SetRequired( B_CrtYd, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetRequired( B_Fab, ITEM_GAL_LAYER( MOD_BK_VISIBLE ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GP_OVERLAY ) );
m_view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( RATSNEST_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( WORKSHEET ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( GRID_VISIBLE ) );
m_view->SetLayerDisplayOnly( ITEM_GAL_LAYER( DRC_VISIBLE ) );
// Load display options (such as filled/outline display of items).
// Can be made only if the parent windos is a EDA_DRAW_FRAME (or a derived class)
// which is not always the case (namely when it is used from a wxDialog like the pad editor)
EDA_DRAW_FRAME* frame = dynamic_cast<EDA_DRAW_FRAME*>( aParentWindow );
if( frame )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*) frame->GetDisplayOptions();
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( displ_opts );
}
}
